Split view in Numbers

Dear Forum users,
We have just transfered to iWork from Appleworks and are trying to iron out the differences! so please excuse me if this post is a little banal.
In Appleworks (as in other spreadsheet software) one can split a view so that you have two portions of the same table being viewed independantly. This is very useful with big tables so that you can see totals etc.
Is this possible in Numbers?
Many thanks.

Unfortunately, no, it's not available in Numbers or Pages. I agree that it is a very useful feature in AppleWorks & I suggest you leave feedback for both the Numbers & the Pages teams.

Similar Messages

  • Split view of table so top rows & bottom rows can be viewed simultaneously

    I sometimes work with large tables (thousands of rows) and need to be able to see what's in the top few rows and bottom rows at the same time. This is easy in Excel; there's a gizmo at the top of the vertical scroll bar that can be used to give a split view. I'm a newcomer to Numbers and have not yet found a way to do this. Any ideas, or is it simply not possible?

    I know this isn't a great solution but if you really really need to see part of the top and part of the bottom of the spreadsheet at the same time, you can hide the rows in between and unhide them when you're done
    Another, maybe better but still not so great way would be to use the filters in the reorganize panel:
    Add a new column. In that column, put a character (a dash, letter, etc) in the rows you want to be visible. In the reorganize panel, make a filter to show only rows that are non-blank in that column. You can quickly switch the filter on and off from here.
    Neither solution is very dynamic (you can't scroll through the bottom half of the spreadsheet while still looking at the top) but it may help if you are messing with only a few rows at a time.
    Lastly, if the top rows you need to see are header rows, you can freeze them. That's similar to the split view in Excel but can only be done for headers (of which 5 is the max).
    Message was edited by: Badunit

  • Is there a way to view image numbers in iPad photos, either of images taken with the iPad or of images copied into Photo (or camera roll) on the iPad?

    Is there a way to view image numbers (metadata) on the iPad Photo app, distinguishing those taken with the internal camera from those downloaded from external camera or copied from an email?

    sberman: My iMac is running iTunes 11.0.2 already. As well, the Photos tab in the iTunes window shows that "Sync Photos from" is un-checked. And in the box to the right of it is the greyed-out empty folder that I previously synced to in order to remove photos from the Camera Roll.
    Ralph9430: I did a reset (Home + Sleep) earlier when I was trying everything I could think of. I have also re-synced a couple of times. No luck.
    Thanks anyway. I was hoping someone out there would tell me they've experienced the same problems (non-functioning DELETE button, and persistent data in Photo Library), even if they haven't found a solution. Then I could assume it's a iOS 6 bug. All I can think of to do next is a full iPad restore.

  • What happened to Split View?

    I wanted to watch the Macword Keynote today to see what features Steve put out there that we don't currently have.
    One is "Split View" email:
    This allows us to see the email message in the current window with the email list at the top, and the mail message at the bottom.
    I also wanted to put out there that I can confirm there are 2 extra tabs at the top of iTunes that they previewed, the second to last on the right vaguely makes out "ringtones".
    Regardless, at the bottom there is an additional green color category that you cannot make out the text to.
    Back to the question... What happened to split view on email?!?!?

    It's just annoying, he really spent some time on it.
    Hopefully in an update.

  • Can you set DW to always show split view?

    This is not a major problem but an annoying thing and I can't seem to find.  I almost always work in split view - never design view.  Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
    I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
    Anyone know how to change this?
    Thanks!
    Ellie

    >>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
    Yes, the same problem started in CS4-Mac for me.
    Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
    Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
    This seems to be pretty buggy.
    Hopefully someone will post a solution.
    ...pt

  • Why can't I type more than one space in a split-view in DW

    Say, I am an a split view in a Dreamweaver CS5 and I'm typing in the right view (whatever it's called), but for some reason I can't type more than a single space there. Can I disable that?

    Thank you, Curtis. One thing that needs to be added to your post is that one has to restart DW for this setting to take effect. (Well, that may be a bug.) But it still doesn't fix the issue (read below.)
    As for the other two comments, I hate when people try to pigeonhole something without even trying to understand someone's situation. Did I say that I would be using it for a layout?
    Here's why I need it. Say, I'm working on typing a paragraph of text. My preference is to have DW in a split-view, with the HTML being displayed on the left and the "result" view on the right. That view on the right allows me to type in text directly into the page w/o worrying about HTML semantics -- very handy feature, except one little detail. Say, I have the following snippet of text, "This is some sample text" and I want to edit out the word "some" with the phrase "very important". So I highlight the word "some" and begin typing. Everything goes well when I finish typing "very", but as soon as I put a space to begin typing the word "important", something in DW makes the resulting phrase to look like this: "This is very importantsample text" Notice that the space after "important" was removed. You see, I'm not used to adding spaces after each of my edits (and that is how 99% of word processors work in the world) so my documents started to miss spaces and it took me awhile to figure out why. I was truly hoping that Curtis' suggestion would fix the issue, but even though I can add more than a single space, DW still removes spaces for me automatically, like I just explained above.

  • My small split-view file manager

    Hello.
    I've created a small file manager with split-view. While some functionality is still missing, the manager is usable and I'm using it as my primery tool for file browsing.
    You can get the browser from here http://github.com/napsy/gsfm
    space - select/unselect
    F5 - copy selection
    F4 - rename selection
    F3 - new directory
    delete - delete selection
    tab - change view
    There is support for custom view with a config file. You put the config file inside your ~/.config directory. A sample config is provided with the source.
    Sere is a screenshot: http://napotnik.info/images/gsfm.png

    It's good that it's C and BSD-licensed, but I don't really see a point in GTK. I mean, there are a lot of GTK file browsers out there already, but there is no (to my mind) proper ncurses file browser written in pure C. It's just MC and vifm, all the others aren't C. So if it would be ncurses I would definetly be interested. That's just my opinion. Anyways, thanks!

  • HT3805 In my split view, the viewed picture is all the way to the right- only a sliver is visible. How do I get it to be centered and viewed in total?

    How can I get the picture in my split view to move back to the center where I can see it all?

    Lynn,
    there should be. Are you perhaps looking in the system library?
    The User Library should appear in the Finder's "Go" drop down menu, like this:
    If your system is Lion or Mt. Lion, you will have to hold down the option-key ⌥ to make it appear in the menu.
    Then look in the folder Preferences for "com.aperture.plist" and remove it.
    Don't forget to quit Aperture before you do this.
    Regards
    Léonie

  • How to view rating stars on pictures in browser or split view

    On an Imac aperture v3.2 I cannot see the rating stars on the pictures in browser or split view.  I can only see them if i open the metadata for each individual picture.  Does anyone know how to turn this feature on?  My husband has a Macbook pro using the same software and he can see them.

    The ratings are part of the Metadata Overlays (link goes to User Manual page with full instructions).  There are seven different Metadata Overlays.  It is helpful to customize each of them.  The customization is done via "View→Metadata Display→Customize".
    The Browser Metadata Overlay is toggle on/off with "u".  "{Shift}+u" will toggle the Browser Metadata Overlay between "Basic View" and "Expanded View".
    What is most likely is simply that either your Browser Metadata display has been toggled off.  Try each of the toggles above, and see if that doesn't bring back the ratings.  If it doesn't, you'll have to add them back to the Metadata View using the customize command above.
    Message was edited by: Kirby Krieger -- link added.

  • Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

    2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
    I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
    I went into the full screen view, edited a photo and got out of the full screen view to export it.
    All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
    (note: at the bottom it says 380 items displayed)
    Going back to full screen view, everything looks and works as nothing has happened:
    In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
    Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
    To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
    At some point I saw this weirdo but have not been able to replicate it:
    Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
    Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
    Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
    edit: added the note under the first image

    When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
    Regards
    Léonie

  • Magin change moving from Design to Split views

    For some reason, the margins of my HTML page change when I
    move from split view to design view. The page is a single table,
    centered with <center>, but when I change views, they whole
    thing shifts over by 19 pixels, from being centered starting at 309
    to being centered starting at 328.
    What the heck!?? Anyone know what might be causing
    this?

    Appearance of a vertical scrollbar?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "D Cam" <[email protected]> wrote in message
    news:fbt85u$cpv$[email protected]..
    > For some reason, the margins of my HTML page change when
    I move from split
    > view
    > to design view. The page is a single table, centered
    with <center>, but
    > when I
    > change views, they whole thing shifts over by 19 pixels,
    from being
    > centered
    > starting at 309 to being centered starting at 328.
    >
    > What the heck!?? Anyone know what might be causing this?
    >

  • Remote images not showing up in design/split view

    Just recently, whenever i updated the image location from the
    local site to the remote site path, the images don't get loaded
    into dreamweaver how it used to.
    i'm not sure if i unchecked something. the paths are correct
    and they show up when i preview in browser so i know it's not that.
    if anyone can help with this it will be great. thanks.

    Do you have spaces in your image file/pathnames?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "zgarcia" <[email protected]> wrote in
    message
    news:e286rc$adb$[email protected]..
    > DW 8.01
    >
    > it's not the put action.
    >
    > what i normally do is compose the email on the local
    site so i have the
    > images
    > showing, add the links etc...
    > then i upload the images onto my remote server.
    > after i do that, i go into the source code and do a
    find/replace on the
    > image
    > directory. (highlight "images" and replace it with the
    > "
    http://www.example.com/campaign/email")
    >
    > now, after i do a replace all, the images would reflect
    whatever is in the
    > remote directory (
    http://etc...) and will actually display
    in the
    > design/split
    > view instead of seeing broken image icons as it's
    currently doing.
    >
    > the remote site locations are correct.
    >
    > let me know if that helps, thanks.
    >

  • Print View in Numbers 3.0

    I Need to see the print view in numbers 3.0. No longer an option under "view" tab. Also the page view I'm given does not align with the preview page when actually go to print - they look different and neither has transfered my document the same from previous numbers document.

    Thats it I have spent alot of time trying to re format my reports from the older version of numbers to the new, I thought for a little while I could live without the page view as i spent alot of time lining up the gold lines as page breaks but now I for some reason cant find the photos I want to use they are only listed by their date and when used in the spreadsheet, they are not where they should be when printing, Im sorry for using this forum for venting but I am absolutely P.....ed off the amount of time I have spent for nothing.  I have really apple and speak very highly of them, and I just cant believe they could update a programme like this, did they even test it before they put out there.  What the F is going on. sorry but Im NOT HAPPY, I think I will now go back to excell definately.

  • Custom Split views don't work like the use to pre- Project 2010

    Hi
    Either we've lost some functionality along the way, or there must be another way of doing the following...
    Up until and including version 2007, I was able to create multiple custom split views in a file (or global.mpt) where the I could specify a different Task Form (e.g., "Predecessors & Successors" or the "Work") depending on which custom
    split view I selected.
    In 2010 and 2013, you have to manually select the Task From you want; the custom split view won't can help you get the specific Task Form you want ((e.g., "Predecessors & Successors", "Work").  At least that has been my experience...
    does anyone have a solution apart from needing to write a VBA event handler?
    Thanks in advance,
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    I agree with Dale. Project remembers the last set of details applied in form views such as Task Form. Using VBA event handlers you can change this behavior.
    1. Open the project file on which this change should be applied.
    2. In the View ribbon, click Macro command and select Visual Basic
    3. If you want the details displayed in the Task Form to be applied to the current file, double click "ThisProject" node under the VBAProject(your file name) or else double click "ThisProject" node under ProjectGlobal (Global.MPT)
    4. Paste below lines in the Project_Open event handler. Save the code.
    Private Sub Project_Open(ByVal pj As Project)
        ViewApplyEx ApplyTo:=1, BuiltInView:=pjViewTaskForm
        WindowActivate TopPane:=False
        ViewShowPredecessorsSuccessors
    End Sub
    5. You can replace the last statement ViewShowPredecessorsSuccessors with another statement that is compatible with Task Form view
    Sai PMP, PMI-SP, MCTS Project, MVP Project

  • Is it possible to view line numbers in the search results in Dreamweaver CS5?

    Is it possible to view line numbers in the search results in Dreamweaver CS5?
    If so how do I switch it on.
    Thanks

    I don't think so. 
    Just double click on results in your Results Panel. 
    DW will open the page to that line of code.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/

Maybe you are looking for