Split view in two vertical panel

Hi Experts,
I want to split my view in two panels (Left & right Panels).
My Req. is i want to show a tree in left panel of sales orders and to show the details of sales order in the right panel.
is it possible in any way please tell me.
i am not using any portal this requirement needs to be fulfill at view level.
Thanks
Ashish.

Hi,
I think you can use 2 container UI elements placed vertically one after the other.
e.g. Set Layout prop. to MatrixLayout for 'ROOTUIELEMENTCONTAINER'. Insert 2 Tray (or Group) UI elements in it. Make layout data prop of first container to MatrixHeadData and other to MatrixData. Set width of both containers to 100%. I hope this is what you are looking for.
Regards,
Saket.

Similar Messages

Split View: Should be easy but...

Ok. So I have a Split View. It looks a bit like this:
Split View
- Tab View
- Scroll View (Text View)
A vertical Split view displaying two things: the Tab View on the left, the Text View on the Right.
I want to change this.
Is there any way of switching the sides? Making the Tab View go to the right and the Text View to the left? and once my app is compiled, is there any property/method/code that would allow the user to change this at runtime?
Thank you a lot!

To switch the sides in Interface Builder, the easiest thing to do is unembed the views from the split view, move the views, and embed them in a split view.
1. Select the two views in Interface Builder.
2. Choose Layout > Unembed Objects.
3. Move the views.
4. Select the two views a second time.
5. Choose Layout > Embed Objects In > Split View.

Split View Resize Panels Via Javascript

using Javascript is there a way to resize the panels in split
view? make one view larger than the other?

http://forum.java.sun.com/forum.jspa?forumID=45

Vim 7.2.25-1 invisible cursor in vertical split view

In new gvim 7.2.25-1 I have invisible cursor in vertical split view. This happen only for gvim, vim is fine. Tried without my configuration (gvim -u NONE -U NONE), same thing.
Last edited by delor (2008-11-04 09:03:13)

Damnshock wrote:
vsajko wrote:
ArchArael
you are right
But it is hard to describe conditions precisely.
I know that doesn't happen every time when I do vertical split
I know that occurs on Gvim 7.2.2 fc5, kde (don't remember version)
Gvim 7.2.26 Ubuntu 8.1 kde 4.1.2
But now I am running (for 1,5 days)
Gvim 7.2.26 Ubuntu 8.1 xfce 4.4.2 (plasmoid in kde was annoying me) and bug still doesn't occurs.
So, is it connected with kde or I was just lucky?
No problems here running on Gnome. It is kind of weird because on KDE 4.1.3 and fluxbox it happened :S
Damnshock
Well...that's really strange. So my guess was wrong. It depends in some way on the window manager used.
Gvim vsplit bug occurs on:
openbox
awesome
fluxbox
kde 4.1
Gvim vsplit does not occurs on:
Gnome 2.24 guess
xfce xfce 4.4.2
Any other?

In Dreamweaver 2014.1 how do I get the vertical settings for split view?

In split view, I want the code window to appear left of the design window as I had it set up in the previous version. I cannot find a place in preferences to do that. Help. I like the code window to the left and properties below the design window.

No I cannot. I've tried to drag the coding window and it seems to be immoveable. I read the reference. It does not answer my question nor do any of the linked articles connected to it. I can float the property window and the other windows just fine and move them where I need them, however the code window in split view goes nowhere. When I have multiple file windows open in tabs and drag one of them the code view stuck at the bottom moves with it.

Split view of table so top rows & bottom rows can be viewed simultaneously

I sometimes work with large tables (thousands of rows) and need to be able to see what's in the top few rows and bottom rows at the same time. This is easy in Excel; there's a gizmo at the top of the vertical scroll bar that can be used to give a split view. I'm a newcomer to Numbers and have not yet found a way to do this. Any ideas, or is it simply not possible?

I know this isn't a great solution but if you really really need to see part of the top and part of the bottom of the spreadsheet at the same time, you can hide the rows in between and unhide them when you're done
Another, maybe better but still not so great way would be to use the filters in the reorganize panel:
Add a new column. In that column, put a character (a dash, letter, etc) in the rows you want to be visible. In the reorganize panel, make a filter to show only rows that are non-blank in that column. You can quickly switch the filter on and off from here.
Neither solution is very dynamic (you can't scroll through the bottom half of the spreadsheet while still looking at the top) but it may help if you are messing with only a few rows at a time.
Lastly, if the top rows you need to see are header rows, you can freeze them. That's similar to the split view in Excel but can only be done for headers (of which 5 is the max).
Message was edited by: Badunit

Why can't I type more than one space in a split-view in DW

Say, I am an a split view in a Dreamweaver CS5 and I'm typing in the right view (whatever it's called), but for some reason I can't type more than a single space there. Can I disable that?

Thank you, Curtis. One thing that needs to be added to your post is that one has to restart DW for this setting to take effect. (Well, that may be a bug.) But it still doesn't fix the issue (read below.)
As for the other two comments, I hate when people try to pigeonhole something without even trying to understand someone's situation. Did I say that I would be using it for a layout?
Here's why I need it. Say, I'm working on typing a paragraph of text. My preference is to have DW in a split-view, with the HTML being displayed on the left and the "result" view on the right. That view on the right allows me to type in text directly into the page w/o worrying about HTML semantics -- very handy feature, except one little detail. Say, I have the following snippet of text, "This is some sample text" and I want to edit out the word "some" with the phrase "very important". So I highlight the word "some" and begin typing. Everything goes well when I finish typing "very", but as soon as I put a space to begin typing the word "important", something in DW makes the resulting phrase to look like this: "This is very importantsample text" Notice that the space after "important" was removed. You see, I'm not used to adding spaces after each of my edits (and that is how 99% of word processors work in the world) so my documents started to miss spaces and it took me awhile to figure out why. I was truly hoping that Curtis' suggestion would fix the issue, but even though I can add more than a single space, DW still removes spaces for me automatically, like I just explained above.

Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first image

When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie

Magin change moving from Design to Split views

For some reason, the margins of my HTML page change when I
move from split view to design view. The page is a single table,
centered with <center>, but when I change views, they whole
thing shifts over by 19 pixels, from being centered starting at 309
to being centered starting at 328.
What the heck!?? Anyone know what might be causing
this?

Appearance of a vertical scrollbar?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"D Cam" <[email protected]> wrote in message
news:fbt85u$cpv$[email protected]..
> For some reason, the margins of my HTML page change when
I move from split
> view
> to design view. The page is a single table, centered
with <center>, but
> when I
> change views, they whole thing shifts over by 19 pixels,
from being
> centered
> starting at 309 to being centered starting at 328.
>
> What the heck!?? Anyone know what might be causing this?
>

Thumbnail Size in Split View Mode

Anyone figure out how to adjust the size of thumbnails when in Split View mode? I can't seem to figure out how. I like a vertical split view and it only shows three thumbnails. Boo-urns.

Make sure your in grid view (control-g), not filmstrip or list. There should be a slider on the bottom of the browser. Or use the shift+bracket keys.

Constrain Split View

Hi,
I have created a simple application that uses a "NSSplitView". Everything works perfectly, but I would like to be able to make sure that none of the two sides of the split view can have a width of less than 50 px.
I tried this code:
THE "MAVController.h" FILE:
========================
#import <Cocoa/Cocoa.h>
@interface MAVController : NSObject {
IBOutlet NSSplitView *splitView;
- (void)awakeFromNib;
@end
THE "MAVController.m" FILE:
========================
#import "MAVController.h"
@implementation MAVController
- (void)awakeFromNib
CGFloat minCoord = 50.0;
[splitView constrainMinCoordinate:minCoord ofSubviewAt:0];
@end
I get the following error:
warning: 'NSSplitView' may not respond to '-constrainMinCoordinate:ofSubviewAt:'
(Messages without a matching method signature will be assumed to return 'id' and accept '...' as arguments.)
How can I constrain the size of the two part of my split view?
Thank you very much,
franky26

The splitView:constrainMinCoordinate:ofSubviewAt: method is called by a NSSplitView on its delegate.
The simplest way is to declare MAVController as the delegate of the SplitView. For example in the awakeFromNib method splitView.delegate = self;Or in Interface Builder.
Now MAVController is the NSSplitView delegate, you have to define the proper method in it. For example, if you want that each of the 2 parts of the NSSplitView have a min size of 50.0- (CGFloat)splitView:(NSSplitView *)sender constrainMinCoordinate:(CGFloat)proposedMin ofSubviewAt:(NSInteger)offset{
CGFloat minCoord = 50.0;
return (minCoord<proposedMin)?proposedMin:minCoord;

Aperture Split View Misbehaving

The vertical photos in the split view bar have all switched from being displayed vertically/normally to being rotated and showing "squashed". They only do it with photos imported from my Sony DSV-HX5V, not iPhone or other cameras. Any ideas?

A few simple things first:
- Does the problem persist after closing and re-opening Aperture?
- Are they distorted in Grid view?
- In Split view, does changing from Filmstrip to Grid (still in Split view) correct the distortion? Does changing the size of the Previews in the Split view grid (use the slider) correct them?
- What happens when you select one Preview, and select "Update Preview" from the context-sensitive menu?

Aperture Split View Problem

The vertical photos in the split view bar at the bottom have all switched from being displayed normally to being rotated and showing squashed and distorted.
I have tried to close and re-open Aperture, and I have also restarted the computer. The pictures are distorted whther they are in the Grid view or Filmstrip. I also tried to "Update Preview", but it tells me that it is up to date.The horizontal/landscape pictures are showing fine, the problem is only with the vertical/portrait pictures in the Split view.

Select all the ones in one Project and run "Photos→Generate Preview". Does that work?
"Update Preview" changes to "Generate Preview" when "{Alt}" is pressed.

Dreamweaver CS3 Split View Issue

Hello All,
I just got the new dreamweaver CS3 and when working in split
view nothing is refreshing correctly. What I mean is, if I click on
some text in the design portion of dreamweaver to try and change
the font, css assignment, or whatever I cannot. I have to click on
the text, hit refresh (f5) and then the correct information in the
properties panel shows up. I have the same problem when selecting
something in the code portion of the split; it does not select the
portion in the design section. What is the deal? Dreamweaver 8 did
this fine.
Anyone else have this problem?
Alex

What OS? Does the problem happen with all files and all
sites, just some,
or just one?
David Alcala
Adobe Product Support

DW CS5 - Split View annoyance

Hello, everyone.
For some reason, my DW has "Split Vertically" default selected every time DW loads. When I want to split view, it's always initially vertically split.
This is annoying me. I would like for the split to be horizontal, always, and if I want a vertical split THEN I'll choose it.
Can anyone tell me how to turn off the default setting for Vertical Split??
Thank you,
^_^

WolfShade wrote:
Is there a reghack that I can do to turn this default to off???
YES, THERE IS!!!
As always, the usual cautionary warning to back up your registry before making any edits to it. The registry can really screw your day if you edit the wrong thing.
Close DreamWeaver, if open.
Click on Start > Run, and enter regedit in the field and hit ENTER.
Navigate to HKEY_CURRENT_USER > Software > Adobe > Dreamweaver CSx > Settings (where x is the version of DW you have installed).
In the right pane, locate SplitViewOrientation and double click it.
Change the value from vertical to horizontal, save, exit regedit. Open DW, open a file, click on VIEW, and "Split Vertically" will not be checked.
^_^

Split view in two vertical panel

Similar Messages

Maybe you are looking for