Split view

I am working with a large table and as I descend i loose sight of the header row. How can I keep it in view?

Hi Walter,
I was reading your other thread which has much in common with is one.
You asked how to insert a header row. Well, you probably already have one, but to answer your question,
In this shot, Row 1 is already a header row. If you want to add more, select the rows then click on the upside down triangle for a menu. (However, I think you already have a header row).
as I descend i loose sight of the header row. How can I keep it in view?
To freeze it, Menu > Table > Freeze Header Rows.
The next thing you can try is hiding some rows so that the top and bottom of your table appear together. Select rows in the middle of the table, leaving just a few at top and bottom. Then:
To get this:
Now you can see what is in the first few rows of your table while you work on the bottom rows. Not quite the same as Split Screen in Excel, but workable.
Hope this helps,
Ian.

Similar Messages

What happened to Split View?

I wanted to watch the Macword Keynote today to see what features Steve put out there that we don't currently have.
One is "Split View" email:
This allows us to see the email message in the current window with the email list at the top, and the mail message at the bottom.
I also wanted to put out there that I can confirm there are 2 extra tabs at the top of iTunes that they previewed, the second to last on the right vaguely makes out "ringtones".
Regardless, at the bottom there is an additional green color category that you cannot make out the text to.
Back to the question... What happened to split view on email?!?!?

It's just annoying, he really spent some time on it.
Hopefully in an update.

Can you set DW to always show split view?

This is not a major problem but an annoying thing and I can't seem to find. I almost always work in split view - never design view. Yet DW seems to default to design view. Even if I have previously edited a page in split or even code view, the next time I open that file (if I have closed and opened DW in the meantime) it opens in design view.
I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Anyone know how to change this?
Thanks!
Ellie

>>I tried making a custom workspace that included viewing files in split view but sure enough whenever I re-open DW any files I open are once again displayed in Design View.
Yes, the same problem started in CS4-Mac for me.
Just for kicks, I opened my custom workspace a moment ago. I then opened a document to split view, then resaved that setup as a new custom workspace.
Upon reopening Dreamweaver the next time, it remembered my split view setting. However, the time after that, I was back in Design view.
This seems to be pretty buggy.
Hopefully someone will post a solution.
...pt

Why can't I type more than one space in a split-view in DW

Say, I am an a split view in a Dreamweaver CS5 and I'm typing in the right view (whatever it's called), but for some reason I can't type more than a single space there. Can I disable that?

Thank you, Curtis. One thing that needs to be added to your post is that one has to restart DW for this setting to take effect. (Well, that may be a bug.) But it still doesn't fix the issue (read below.)
As for the other two comments, I hate when people try to pigeonhole something without even trying to understand someone's situation. Did I say that I would be using it for a layout?
Here's why I need it. Say, I'm working on typing a paragraph of text. My preference is to have DW in a split-view, with the HTML being displayed on the left and the "result" view on the right. That view on the right allows me to type in text directly into the page w/o worrying about HTML semantics -- very handy feature, except one little detail. Say, I have the following snippet of text, "This is some sample text" and I want to edit out the word "some" with the phrase "very important". So I highlight the word "some" and begin typing. Everything goes well when I finish typing "very", but as soon as I put a space to begin typing the word "important", something in DW makes the resulting phrase to look like this: "This is very importantsample text" Notice that the space after "important" was removed. You see, I'm not used to adding spaces after each of my edits (and that is how 99% of word processors work in the world) so my documents started to miss spaces and it took me awhile to figure out why. I was truly hoping that Curtis' suggestion would fix the issue, but even though I can add more than a single space, DW still removes spaces for me automatically, like I just explained above.

My small split-view file manager

Hello.
I've created a small file manager with split-view. While some functionality is still missing, the manager is usable and I'm using it as my primery tool for file browsing.
You can get the browser from here http://github.com/napsy/gsfm
space - select/unselect
F5 - copy selection
F4 - rename selection
F3 - new directory
delete - delete selection
tab - change view
There is support for custom view with a config file. You put the config file inside your ~/.config directory. A sample config is provided with the source.
Sere is a screenshot: http://napotnik.info/images/gsfm.png

It's good that it's C and BSD-licensed, but I don't really see a point in GTK. I mean, there are a lot of GTK file browsers out there already, but there is no (to my mind) proper ncurses file browser written in pure C. It's just MC and vifm, all the others aren't C. So if it would be ncurses I would definetly be interested. That's just my opinion. Anyways, thanks!

HT3805 In my split view, the viewed picture is all the way to the right- only a sliver is visible. How do I get it to be centered and viewed in total?

How can I get the picture in my split view to move back to the center where I can see it all?

Lynn,
there should be. Are you perhaps looking in the system library?
The User Library should appear in the Finder's "Go" drop down menu, like this:
If your system is Lion or Mt. Lion, you will have to hold down the option-key ⌥ to make it appear in the menu.
Then look in the folder Preferences for "com.aperture.plist" and remove it.
Don't forget to quit Aperture before you do this.
Regards
Léonie

How to view rating stars on pictures in browser or split view

On an Imac aperture v3.2 I cannot see the rating stars on the pictures in browser or split view. I can only see them if i open the metadata for each individual picture. Does anyone know how to turn this feature on? My husband has a Macbook pro using the same software and he can see them.

The ratings are part of the Metadata Overlays (link goes to User Manual page with full instructions). There are seven different Metadata Overlays. It is helpful to customize each of them. The customization is done via "View→Metadata Display→Customize".
The Browser Metadata Overlay is toggle on/off with "u". "{Shift}+u" will toggle the Browser Metadata Overlay between "Basic View" and "Expanded View".
What is most likely is simply that either your Browser Metadata display has been toggled off. Try each of the toggles above, and see if that doesn't bring back the ratings. If it doesn't, you'll have to add them back to the Metadata View using the customize command above.
Message was edited by: Kirby Krieger -- link added.

Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first image

When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie

Magin change moving from Design to Split views

For some reason, the margins of my HTML page change when I
move from split view to design view. The page is a single table,
centered with <center>, but when I change views, they whole
thing shifts over by 19 pixels, from being centered starting at 309
to being centered starting at 328.
What the heck!?? Anyone know what might be causing
this?

Appearance of a vertical scrollbar?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"D Cam" <[email protected]> wrote in message
news:fbt85u$cpv$[email protected]..
> For some reason, the margins of my HTML page change when
I move from split
> view
> to design view. The page is a single table, centered
with <center>, but
> when I
> change views, they whole thing shifts over by 19 pixels,
from being
> centered
> starting at 309 to being centered starting at 328.
>
> What the heck!?? Anyone know what might be causing this?
>

Remote images not showing up in design/split view

Just recently, whenever i updated the image location from the
local site to the remote site path, the images don't get loaded
into dreamweaver how it used to.
i'm not sure if i unchecked something. the paths are correct
and they show up when i preview in browser so i know it's not that.
if anyone can help with this it will be great. thanks.

Do you have spaces in your image file/pathnames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"zgarcia" <[email protected]> wrote in
message
news:e286rc$adb$[email protected]..
> DW 8.01
>
> it's not the put action.
>
> what i normally do is compose the email on the local
site so i have the
> images
> showing, add the links etc...
> then i upload the images onto my remote server.
> after i do that, i go into the source code and do a
find/replace on the
> image
> directory. (highlight "images" and replace it with the
> "
http://www.example.com/campaign/email")
>
> now, after i do a replace all, the images would reflect
whatever is in the
> remote directory (
http://etc...) and will actually display
in the
> design/split
> view instead of seeing broken image icons as it's
currently doing.
>
> the remote site locations are correct.
>
> let me know if that helps, thanks.
>

Custom Split views don't work like the use to pre- Project 2010

Hi
Either we've lost some functionality along the way, or there must be another way of doing the following...
Up until and including version 2007, I was able to create multiple custom split views in a file (or global.mpt) where the I could specify a different Task Form (e.g., "Predecessors & Successors" or the "Work") depending on which custom
split view I selected.
In 2010 and 2013, you have to manually select the Task From you want; the custom split view won't can help you get the specific Task Form you want ((e.g., "Predecessors & Successors", "Work"). At least that has been my experience...
does anyone have a solution apart from needing to write a VBA event handler?
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

I agree with Dale. Project remembers the last set of details applied in form views such as Task Form. Using VBA event handlers you can change this behavior.
1. Open the project file on which this change should be applied.
2. In the View ribbon, click Macro command and select Visual Basic
3. If you want the details displayed in the Task Form to be applied to the current file, double click "ThisProject" node under the VBAProject(your file name) or else double click "ThisProject" node under ProjectGlobal (Global.MPT)
4. Paste below lines in the Project_Open event handler. Save the code.
Private Sub Project_Open(ByVal pj As Project)
    ViewApplyEx ApplyTo:=1, BuiltInView:=pjViewTaskForm
    WindowActivate TopPane:=False
    ViewShowPredecessorsSuccessors
End Sub
5. You can replace the last statement ViewShowPredecessorsSuccessors with another statement that is compatible with Task Form view
Sai PMP, PMI-SP, MCTS Project, MVP Project

Horizontal scroll not working in aperture split view

I had recently upgraded to mountain lion and the newest aperture, but I noticed a problem with horizontal scrolling in aperture split view. I am currently using a magic mouse, and it scrolls just fine within other applications except in aperture split view. (it doesn't go to the next picture when I gesture left and right) if I do it many times, it will change to the next picture but then stops scrolling again. I had tried to use a trackpad and it is better but I have to do it slowly and occationally it just doesn't work. It only happens only in Aperture and not in safari or other applications. Does anyone know the solution to this problem? Any little help is greatly apprecitated

The recent Aperture update disabled the "Scroll to navigate photos in the Viewer" option.
You may need to reenable it in the Aperture general preferences.
Regards
Léonie

In Dreamweaver 2014.1 how do I get the vertical settings for split view?

In split view, I want the code window to appear left of the design window as I had it set up in the previous version. I cannot find a place in preferences to do that. Help. I like the code window to the left and properties below the design window.

No I cannot. I've tried to drag the coding window and it seems to be immoveable. I read the reference. It does not answer my question nor do any of the linked articles connected to it. I can float the property window and the other windows just fine and move them where I need them, however the code window in split view goes nowhere. When I have multiple file windows open in tabs and drag one of them the code view stuck at the bottom moves with it.

Thumbnail Size in Split View Mode

Anyone figure out how to adjust the size of thumbnails when in Split View mode? I can't seem to figure out how. I like a vertical split view and it only shows three thumbnails. Boo-urns.

Make sure your in grid view (control-g), not filmstrip or list. There should be a slider on the bottom of the browser. Or use the shift+bracket keys.

Previews not displaying in split view in Aperture

Recently Aperture has stopped displaying previews for a number of photos (but strangely not all) when in split view. If I switch to browser view the previews are all there, and if I then return to split view they are back to being displayed. But if I move to another project and then return to the first they are gone again. I have repaired the Aperture database with no change, but not yet rebuilt it. This change in behaviour was not concurrent with an Aperture update. However there have been lots of updates affecting 10.8.2 since the most recent version of Aperture. Any thoughts?
Thanks,
Bob
Aperture 3.4.3
OS X 10.8.2
Late 2009 MacBook

Here is an image of Aperture without Viewer

Cs4 dreamweaver suddenly crashes when selecting code/split view

i have looked around and found this issue in older posts from 2008 but have not found a resolution. i've had dw cs4 for mac for a several months and all of a sudden it started crashing when i select code/split view.
i have:
deleted prefs
deleted config folder and .dat file
started up in safe mode and new user mode
no other issues with any other adobe apps or crashing in general
have plenty of memory
got rid of extensions
i feel like it is a corrupted file that is doing it unfortunately i dont have my original disk on hand to reinstall right now (purchased cd instead of download). UGH!
i'm running: snow leopard / 10.6.4 / 2x2.66 ghz dual core intel xeon / 7gb memory
here are the first few lines of the same error code:
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
Crashed Thread: 19
Thread 0: Dispatch queue: com.apple.main-thread
0   libSystem.B.dylib             0x940d2099 szone_free_definite_size + 654
1   libSystem.B.dylib             0x940d1ba8 free + 244
2   com.apple.carbonbundletemplate 0x1e85431d js_FinalizeStringRT + 31
3   com.apple.carbonbundletemplate 0x1e835694 js_GC + 2156
4   com.apple.carbonbundletemplate 0x1e8359bc js_ForceGC + 67
5   com.apple.carbonbundletemplate 0x1e8592b1 js_DestroyContext + 150
6   com.apple.carbonbundletemplate 0x1e80bdc8 JS_DestroyContext + 25
7   com.apple.carbonbundletemplate 0x1e801237 JS_LangParser::DestroyJSEngine() + 43

Have you done a complete uninstall, clean up, and then reinstall? - Sounds like that's the only thing you haven't tried, so I'd try that next. Yeah, I know... a real pain. The sort of thing we on the PC side have to deal with far more often unfortunetly ;-/
Lawrence Carmer - *Adobe Community Professional*
http://www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in PHP and ColdFusion
Stay updated - http://blog.cartweaver.com

Split view

Similar Messages

Maybe you are looking for