Split x2 with digitizer pen

I have a spare digitizer pen I got when I purchased my TM2 Touchsmart. Is there a way to have this, or any other Wacom pen, work with the Split x2. I've tried the TM2 driver and the Wacom driver without success. Has anyone else tried this too?

Hi plloyd1010,
In my knowledge, the Split X2 will not work with Digitizer pens of any kind.
!------------------- Please click the KUDOS star on the left to say 'Thanks'. Please mark 'Accept as Solution' if it answers/solves your problem. Thank you-----------------------------------------------------------------!
I am an HP Employee.

Similar Messages

Problems with Illustrator CC 2014 in Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen.

Hello to everybody!
Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
I was extremely disappointed that the brush in new version does not work correctly. Watch the video please that I did specifically for the demonstration.
I use Adobe Illustrator CS6 and Adobe Illustrator CC 2014 for comparison. In the old version the brush is works correctly. You must do a lot of clicks to start the brush in CC 2014 version (please see video). What causes of the problem? Please help me!

Hello to everybody!
Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
I was extremely disappointed that the brush in new version does not work correctly. Watch the video please that I did specifically for the demonstration.
I use Adobe Illustrator CS6 and Adobe Illustrator CC 2014 for comparison. In the old version the brush is works correctly. You must do a lot of clicks to start the brush in CC 2014 version (please see video). What causes of the problem? Please help me!

Will the Lenovo Helix Digitizer Pen work with Windows 7

Hello forum,
I work in the IT department and we have recently order a number of Lenovo Helix to use for special projects.
We will be downgrading to Windows 7 64-bit.
My question is will the digitizer pen still be supported by Windows 7?
Maybe I over looked, but I did not see any drivers that seemed to be associated with the digitizer pen or any previous mention of this and downgrading to Windows 7.
Any information you can provide will be helpful.
Solved!
Go to Solution.

Welcome to the forum!
Stylus pen is natively supported by W7 and it will work "out of the box".
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

What digitizer pen is compatible with Portege Z10T-A

Hi All,
I have the z10t-a i5 telstra 4G cellular model.
This model did not come with the digitizer pen or stylus and i am wondering if the pens are compatible.
The support website says the pen is compatible with the Z series but am not sure.
Can anyone shed any light on the subject.
I would hate to spend the money on an accessory that did not work.
Cheers

Hi guys,
I found also some details about the Toshiba Digitizer Pen with Eraser
Part number: PA5133U-1EUC and this digitizer pen is compatible with the Toshiba Portg Z10t, Z15t Ultrabook series and 10 Excite Write Tablet PC
Further details:
+Using this digitizer pen, you can write directly on the screen and save your notes in your own handwriting - or convert them to typed text for use in other applications. The pen can also handle common mouse and keyboard tasks like opening applications, selecting text and displaying menus. Since the grid provides the power to the pen through resonant coupling, no batteries are required. Keep a spare pen handy.+

ThinkPad Tablet 10 (TPT10) digitizer pen does not work

I have a new TPT10 that came with the ultra keyboard and digitizer pen. Pen is completely unresponsive, touch screen works fine. TPT10 is fully updated with both Msoft and Lenovo software/drivers.

did you ever get this resolved? I have the same problem.

20C0001HUS Thinkpad Yoga with digitizer?

Hi! I would like to buy this Thinkpad yoga model and I would like to know if the screen is digitizer enabled and it comes with the pen. What is the storage capacity on this model?
I asked various vendors from this site and everybody tells me something different...
http://www.shopbot.ca/pp-lenovo-thinkpad-s1-yoga-i5-4300u-20c0001hus-lenovo-price-483964.html

So the majority of the vendors told me that the storage is 180Gb SSD and that the digitizer pen is not included. Anyway the screen is an fhd
1920 x 1080, so my question is... If I buy a pen somewhere willl I be able to use the digitizer stylus anyway?
Thank you

Digitizer pen

I have just recently bought an i7 Lenovo Yoga pro 2. As many of you may know, it does not come with a digitizer pen. I would like to purchase one but I am not sure what to get. Please help me with suggestions.

Good afternoon and welcome to the community.
The Yoga 2 Pro doesn't have a digitizer. The panel is 10-finger capacitive touch. That said, there are a number of capacitive stylii available, but I don't have experience with them , so I can't offer a recommendation.
Hopefully other members will join the discussion with their experiences that will aid your decision.
Cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Ideapad yoga 11s WITHOUT a pen - can I get it to work with a pen?

Got the ideapad yoga 11s for a surprise gift on christmas. And just found out there is also a version of the ideapad yoga with a stylus/wacom pen. That would have made this apparatus just perfect for me. So my 3 questions quite simply are:
1. Can anyone tell me if this version can be "modified" to work in the same way (e.g. pressure sensitivity) if I can acquire the pen / a pen separately?
2. Can a pen indeed be acquired separately?
3. And what kind of pens would work?
Please help And thank you to anyone who can tell me the answers!
Edit: Suppose I need a digitizer. I presume this model does not have it? I don't even know what that is physically - so is it something I CAN accuire for this machine?

Only digitizer pens and digitizer displays have pressure sensitivity. If you want this, take a look at the ThinkPad Yoga for your next purchase.
You need a capacitive stylus pen, like the Wacom Bamboo Stylus
This is a relatively good article worth reading: http://www.digitaltrends.com/mobile/best-digital-pens-writing-apps-and-stylus-tablets/
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Best Replacement digitizer pen for my TouchSmart Tm2

Hi, I recently lost my digitizer pen to my touchsmart tm2 notebook, I looked for an exact replacement to this pen but they seem to be out of stock. Are there other digitizer pens that work with my notebook you can recomend?
I don't mind buying another brand or another type of pen from HP so as long as it works with my notebook.
Plus I don't want to draw with my mouse ( Btw I am an illustrator)

@jcarmona1978
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Is the new slider2 support digitizer pen?

Is the new convertible tablet slider2 support digitizer pen?

The new earpods should support extended bass noise with other devices as it is not a software eq but the actual physical response of the speaker inside the earpod.
Hope it helps
Ryan

Yoga S1 Digitizer Pen Question

I just got a Yoga S1 with the Digitizer Pen. Is the pen supposed to behave similar to a standard touch? In otherwords, can I use it instead of my finger when touching the screen? So far it doesn't seem to have any affect on the windows start screen. I know the pen works because I found an app that translates the writing to text (can't remember the app name, still learning what came on the computer). I'm just trying to learn the capabilities and limitations of the pen.
Thanks in advance
Solved!
Go to Solution.

https://www.flickr.com/photos/lead_org/14487189987/
i recorded the above video to show you the basic behaviour under both finger touch and pen digitiser. Compare this to your laptop, and see if it is the same.
Also, it would helpful to do a video recording of what you are getting, then upload it to say flickr or something. This will allow us to troubleshoot more easily.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Order split functionality with PP-PI

Hello Forum,
I am not sure whether we can use the order split functionality with process orders . I had implemented it earlier for a client with discrete MFG production type but not aware whether we can do so in process industry (couldn't find the provision to do so in process order operation overview screen function menu path).
Cheers
Kaushik

Hi Kaushik,
Yes your right.
Order split functionality is only applicable for Discrete manfg not for PI industry this is major difference between PI & DM.But you can achieve this at the time of process order confirmation.
Example :-In the Goods Movement Overview of Process Order confirmation FG material is done Auto GR. This FG material Quantity needs to be splitted. Push button "Split" is provided in the bottom of the Goods Movement Overview screen of Process Order Confirmaton.
Say FG quantity = 25 KG which is to be confirmed. Client wants to split the FG quantity into 1 KG wise, for this he needs to split into 25 times.
You can implement this by using below work order
Please use the WORKORDER_GOODSMVT for splitting the GR in Confirmation
This u can implement in PI.Also check Mr.Paulo reply that could be one possibility.
check & revert.
TnX

Any way to make markup on pdf file with optical pen

I am looking for some way to make markups on pdf files by using a optical pen to avoid printing and then making markup with normal pen or by making them onscreen using a regular mouse.
there are optical pens in market which can make markups on new documents but i am looking to work on pdf files.

I have exactly the same quesiton.

Split valuation with batch management and project stock

Dear Gurus,
I need to combine two following requirements:
1. split valuation with batch management (valuation type = batch number)
2. project stock
These two functionalities work fine separately but not together.
I receipt PO for material with spiit valuation on a batch level into a project stock. Posting is OK and material document (MSEG table) seems to be OK (batch number, valuation type and project stock are in this table). The problem appears when I want to display material in this valuation type (MM03) or batch (MSC3n). They don't exist!!! Short investigation showed that during goods receipt table MBEW (valuated stock) was not updated with this valuation type.
But If PO is receipt into normal stock first and then posted into project stock everything is OK.
Have you had or heart about such issue? I would appreciate any sugestion.
Thsnks in advance.
Marcin Bernat

Hi,
As you already know ,u are using project stock and doing goods receipt against project, stock table QBEW will be updated and not MBEW. MBEW only updates in case of plant stock valuation. If u receive any goods against project stock it does not contribute to plant stock. Irrespective whether your material is managed in split valuation or not, If it is received against project stock it only updates QBEW. There is no need to update MBEW, if u r using split valuation in project. QBEW also have valuation type as another level like MBEW. If u want to see material price for project stock, it can be seen in QBEW -valuation type and not in mm03.
As u r receiving goods against project stock this is d only reason QBEW is updated and not MBEW.
QBEW will store all information like MBEW for batch number, valuation type and project stock assignment.
Hope it answers your question.
Deepak.

HT6114 My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?

Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?

Split x2 with digitizer pen

Similar Messages

Maybe you are looking for