Splitting a document,in output options you select the target folder to be "the same folder selected at start"? Where is that folder?
When splitting a document, in output options you can select the target folder to be "the same folder selected at start", but where is that folder? I assumed it would be the original location of the source file but in my test the split files are not there just the source file.
Have you checked My Documents? You might close Acrobat and reopen, then see what folder comes up when you select File>Open.
Similar Messages
-
I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.
Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
I was ALWAYS able to open Adobe Reader items on my IMAC but just recently it is giving me a message stating "Before Viewing PDF documents in this browser you must launch Adobe Reader and Accept the End User License Agreement, then quit and relaunch the browser. When I download Adobe Reader for MAC it does not give me an option to except and Agreement I am using OS 10.9 HELP ASAP!!
lindsey k wrote:
Before Viewing PDF documents in this browser you must launch Adobe Reader and Accept the End User License Agreement, then quit and relaunch the browser.
And... did you do what the message tells you?
lindsey k wrote:
When I download Adobe Reader for MAC it does not give me an option to except and Agreement
Nothing to do with the download; you need to open Adobe Reader once after the install is complete, and accept the EULA. -
Getting error: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser. I just purchased and installed Adobe acrobat pro for the Mac today.
Hi Tbeirne,
If you just want to save a pdf opened in Safari to your machine use the save as option from within the Reader plugin window. Just click on any of the buttons highlighted in below screenshots to Save a pdf at any location on your machine.
or
To summarize the issue, if you had opened an Internet PDF in a browser plug-in, you must use the save feature in the plug-in, not the Safari File > PDF Export, or File > Save As...
Please let us know if this solution works for you and you are able to save and view PDFs files locally.
Regards,
Shashi -
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
I have tried to relaunch adobe but still keep getting same message. I can however download file and then open it with preview but would like to get this sorted!!Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
i did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)
You downloaded Adobe... what? Adobe has tons of applications.
Which Adobe product did you download?
Clinton -
Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.comSorry if I failed to mention, I have done this as well.
-
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I'm trying to re-install I-Tunes on my Windows 7 computer. I get the following error message: Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. HELP?
Did you try to update iTunes through "Apple Software Update"?
Uninstall everything {iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour , Apple Application Support (iTunes 9 or later)}
http://support.apple.com/kb/ht1923
then reinstall itunes. (Download it from Apple's site.) -
Please help
this has happened since I did the free trial for Adobe XI Pro. After the trial there didn't seem to be an option to return to just using the reader. I tried to uninstall adobe XI Pro but perhaps I didn't do it correctly because I have got this message ever since I tried to reinstall adobe reader. Is there another way to find the EULA if it does't automatically come up when you launch the product?
-
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User Li
I keep getting this error message and I don't know how to do what it is asking, so I can open documents on line.
PatsyTHANK YOU!
I wasn't sure how to find the applications folder, but once I found it, I was able to find the Adobe Reader icon and when I clicked on that, the agreement came up!
Ugh! You'd think they'd make that sucker come up automatically after installation, instead of making people look for it.
Thanks again! -
Can somebody help me with this?
Hey Paul,
Please try to:
Remove from the folder /Library/Internet Plug-Ins:
1) AdobePDFViewer.plugin
2) AdobePDFViewerNPAPI.plugin
backup these plugins - just in case. -
I have recently started using iCloud on my laptop syncing it with my iPad. When the syncing process starts it stops and gives me a message something like: You do not have permission to sync this folder. Then it wants me to unlock and gives other suggestions. I have done them all and still cannot get the syncing process past this folder. I is a folder in my documents. Anyone have any solutions?
If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback -
The version of this vi downloaded on the target does not match the version you have in the project
I am using Labview 8.6 and field point cFP-2220
I have a project that have some VIs running on the development computer and some VIs running on the field point (one top level VI and a few sub Vis).
When I run the program every thing is working, I disconnect from the field point, still every things is running; however when I reconnect I get the error above.
For FP Write(float-IO).vi and FP Write(Boolean-IO)
error message attached. Any help will be greatly appreciated.
Thanks.
Attachments:
error.JPG 42 KBI am having this same issue, but am running LV2010. The conflict, for me, is always with NI_LVConfig.lvlib
If I hit the Apply button, the code deploys and runs on my cFP-2120 without issue. I disconnect from the target in Project Explorer, reconnect without any code changes and I get the same Conflict Resolution popup.
The code I ran on my RT target was a Get Date/Time in Seconds writing to an indicator - that's it. -
Smartforms: Output Options for Field Contents not working within table
Hello,
to display an amount and its unit I am using &GS_MM_IT_GEN-MENGE(R)& &GS_MM_IT_GEN-MEINS& with a line of a table. Unfortunatly it seams that the output option "R" (right-justified) is not working with the table context. Has anyone an idea, what to do?
Thanx,
PeterDear all,
thank you for your suggestions. I have found out, that the output option work pretty well as described in the documentation. The are output options of a field and not of a column! To get a right justified column, I had to change the attribute of the parapraph assigned to the column.
Regards
Peter
Maybe you are looking for
-
Hi, I have prepared a stacked canvas on a content canvas. Both content and stacked canvas are based on the same data block. In the data block 2 items are on content canvas and the remaining are on stacked canvas. I have also a scroll bar on the conte
-
i am using file2rfc scenario with request and response..usingBPM. i want to create 3 communication channels, shall i use 3 business system/services for these.. or 2 business services and 1 busines ssystem. any maximum limit for using bus sys/services
-
Can I contact apple without calling?
I cannot remember my security answer wand what makes it worst is that I cannot remember my recovery email
-
ApplicationUpdater UI auto update failing Error# 16824
We have an internal AIR app, there were some small changes made yesterday so the version number was increased and the application was packaged and uploaded to the server with an updated config XML on the server to match the new version number. Nothin
-
ITunes 12 not recognizing any attached devices
I have installed uninstalled and reinstalled iTunes 12 about 3 times. It will not recognize any of my devices, iphone, ipod, ipad, etc. My PC is running Windows 8 and it is seeing the usb connections each time I attach a device. iTunes does not se