Splitting audio and video for import to Breeze

I have recently taken over some projects that someone else
created in PowerPoint, Captivate, and Breeze. I’ve worked
with Captivate but am new to Breeze and riding the learning curve.
Here’s the problem: Each project is stored within its
own folder, which includes .SWF and .MP3 files. Each .MP3 file
represents the entire audio recording for a single Captivate file.
As best as I can figure, the person creating the Breeze files
created a Captivate file, published the .SWF and somehow created an
associated .MP3 file, then imported each file into a single
PowerPoint slide.
This leaves me with two questions:
1. How would you export the audio for an entire captivate
file (i.e., not creating a single file for each slide)?
2. Does it make sense to do this? For example, is it easier
to normalize the audio for all the slides in the PowerPoint by
following this process?
Thanks!
Jessica

Hello Rob,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Similar Messages

  • Adobe Captivate 6 Demonstration Mode - Splitting Audio and Video

    Hi, I have just recorded a conference call using the software demonstration mode.  There was a little bit of discussion at the beginning that I wanted to edit out, so I opened edit audio and used the insert silence at the beginning.  This deleted the 10 seconds of the audio but not the video and now the recording is off.  How do I get these to match up?  I tried adding time to the beginning of the audio in the edit mode, but that did not help.  I apprecaite any help!

    Hi,
    Have you recording the demonstration in -- Automatic--Demo mode in Cp?
    If that is the case it would have captured screen based upon keystores and mouse clicks. You can check your film strip and manually delete the irrelevant slides.
    Regarding the audio, you could have selected the piece of audio you wished to remove and "deleted" that.
    Thanks,
    Anjaneai

  • Splitting Audio and Video Signal

    HI,
    I would like to be able to split the video and audio signal from my ipad via apple tv to enable the video to be viewed on the ipad and audio out of the amp speakers.  I can do this via bluetooth (for instance in my car) but not via airplay in the home.  Any ideas or app suggestions that might make this work?  Ultimately i want to cinnect the ipad into a projector and sending audio back the amp in another room.
    thanks
    cam.

    U can use a digital to analogue convertor to separate the sound http://www.amazon.co.uk/Digital-Optical-Coaxial-Toslink-Converter/dp/B0074JZ8ZW

  • Since i have updated the osx, my audio and video for Photo Booth had been altered... How to fix this problem????!!!!

    please help me! I make YouTube videos and count on PhotoBooth to do so and now it's not working!!! Any solutions??? Am I the only one with this problem???
    When I record a video it goes and i will talk and yea... make a video... but then when I play it back the audio is always behind the video!!!! Is there any way to fix this. (By the way i am not super technical so please dumb it down for me:) )

    You can check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting
    *http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • How to find a proper host for my audio and video for podcasts?

    how do i find a proper audio/video host that can work with
    the feed for podcasts?

    This is help you ? http://dfcb.github.com/BigVideo.js/  I like to Know too but i dont nothing about code.

  • Razor blade tool not cutting audio and video at the same time

    Hiya,
    When using the razor blade tool in a timeline, my razor only cuts the video track, or one audio track at a time. The audio and video were imported together.
    I would like for the video and two audio tracks to be cut at the same time--so that when I'm cutting I don't have to click three times (VA1A2).
    What needs changed to do this? Thank you!!!!
    A little annoying -- but would be a time saver. Never had this problem before FCS2.
    Thanks again!

    Are the video and audio clips linked? If they're not, the cut will only apply to the track under the blade tool.
    -DH

  • Does the mini displayport able to transfer audio and video to an external monitor (example: a tv) using a 2011 13" MacBook Pro with an hdmi cable?

    I was wondering this, because I want to hook up my 2011 MacBook Pro to a external monitor (TV) using an hdmi cable.  This would be heplful before I buy a mini displayport to hdmi adapter, and then maybe find out that the mini displayport might not transfer audio, only video.

    Yes, min Displayport supports audio and video for the 2011 MBP 13" via HDMI.

  • MHP(XletView)  streaming audio and video sample

    I need some sample which uses streaming audio and video for Xletview, where can find it??

    Hi,
    If you want some examples check the pege:
    http://www.mhp-interactive.org/code/codesamples.shtml
    Have a nice playing
    Regards, Martinez

  • How to synchronize audio and video

    Hello,
    I have an application that stream video images. Whats going on at the other end( the audio) I can also stream that.
    Now i want to synchronize both audio and video for effective synchronized output.
    Can i do that. I dont know the API that are available in Doja. Is Any timebase or timesynchronize APIs are available through which i can synchronize both.
    Any Suggestions and ideas can be implemented.
    Thanks

    I know that In Midlet development using MMAPI there are APIs available to synronize the players like
    p1.setTimaBase(p2.getTimeBase())
    But I am not using Players. Through http connection I m getting the raw image data and displaying it through ImageItem i.e no players required.
    Therefore If i stream the audio like this How to synchronize that.
    I relly need ur Help
    Thanks

  • TIMECODES are important for audio and video sync issues

    Hello, just wanted to pass on what I learned so that others can avoid the trouble that I've had to go through. Perhaps this may help someone who is stuck on the launch pad. :)
    BOTTOM LINE: Info for the beginner. Audio and video not in sync in Premiere Pro CS3 V3.2.0
    PROBLEM: Capture works great it seems. When I go to the folder that contains the captured file and view in Windows Media Player audio and video are in sync. BUT when viewing the video asset in the source and program monitors, the audio and video are not in sync.
    SOLUTION:
    Before capturing a tape make certain the following is checked:
    (1) Edit->Preferences->Capture->Use device control timecode
    (2) Edit->Preferences->Device Control->Options->Timecode Format
    (3) Project->Project Settings->General->Video->Display format
    As for the devices timecode choose something other than Auto Detect. Then match the project timecode with what was chosen during capture. The projects display format could of course be set to frames.
    I searched everywhere for audio and video sync issues in google, adobe forums, F1 help, and hv20.com and everyone was talking about:
    (1) Presets: 1080p30 vs. 1080i30 (60i).
    (2) brakes in the tape where timecode for the audio and video get misaligned during capture.
    But choosing the correct hardware settings and timecodes to solve audio and video sync issues never popped up.
    MY HARDWARE: Canon HV30, HDV

    >Audio and video not in sync in Premiere Pro CS3 V3.2.0
    Must be an HDV only issue because my synch is always perfect.

  • DO i need some extra hardware interface for receving both Audio and video

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
         config= new Config();
         GridBagLayout gridBagLayout= new GridBagLayout();
         GridBagConstraints gbc;
         JPanel p= new JPanel();
         p.setLayout( gridBagLayout);
         JPanel localPanel= createLocalPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.gridwidth= 2;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
         p.add( localPanel);
         JPanel targetPanel= createTargetPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 1;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
         JPanel mediaPanel= createMediaPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 2;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
         update.setEnabled( false);
         rtcp.addActionListener( this);
         update.addActionListener( this);
         buttonPanel.add( rtcp);
         buttonPanel.add( update);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 3;
    gbc.gridwidth= 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
         p.add( buttonPanel);
    getContentPane().add( p);
         list.addMouseListener( this);
         addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "Media Locator:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_media_file= new JTextField( 35);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
         p.add( tf_media_file);
         tf_media_file.setText( config.media_locator);
         cb_loop= new JCheckBox( "loop");
         startXmit= new JButton( "Start Transmission");
         startXmit.setEnabled( true);
         startXmit.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 2;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
         p.add( cb_loop);
         cb_loop.setSelected( true);
         cb_loop.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
         p.add( startXmit);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
         p.setBorder( titledBorder);
         return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         targets= new Vector();
         for( int i= 0; i < config.targets.size(); i++) {
         targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
         list.addKeyListener( this);
         list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
         p.add( scrollPane);
    JPanel p1= new JPanel();
         p1.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_address= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
         p1.add( tf_remote_address);
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
         p1.add( tf_remote_data_port);     
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");     
    removeTarget= new JButton( "Remove Target");
         p2.add( addTarget);
         p2.add( removeTarget);
         addTarget.addActionListener( this);
         removeTarget.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.gridwidth= 2;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 20,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
         p1.add( p2);
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
         p.add( p1);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
         p.setBorder( titledBorder);
         return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         JTextField tf_local_host= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
         p.add( tf_local_host);
         try {
    String host= InetAddress.getLocalHost().getHostAddress();     
         tf_local_host.setText( host);
         } catch( UnknownHostException e) {
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
         p.add( tf_data_port);
         tf_data_port.setText( config.local_data_port);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
         p.setBorder( titledBorder);
         return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
         if( source == addTarget) {
         String ip= tf_remote_address.getText().trim();
         String port= tf_remote_data_port.getText().trim();
         String localPort= tf_data_port.getText().trim();
         addTargetToList( localPort, ip, port);
         if( avTransmitter != null) {
         avTransmitter.addTarget( ip, port);
         } else if( source == removeTarget) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              if( avTransmitter != null) {
         avTransmitter.removeTarget( target.ip, target.port);
              targets.removeElement( target);
              listModel.setData( targets);          
         } else if( source == startXmit) {
         if( startXmit.getLabel().equals( "Start Transmission")) {          
         int data_port= new Integer( tf_data_port.getText()).intValue();
              avTransmitter= new AVTransmitter( this, data_port);
         avTransmitter.start( tf_media_file.getText().trim(), targets);          
              avTransmitter.setLooping( cb_loop.isSelected());
         startXmit.setLabel( "Stop Transmission");
         } else if( startXmit.getLabel().equals( "Stop Transmission")) {
              avTransmitter.stop();
              avTransmitter= null;
              removeNonBaseTargets();
              listModel.setData( targets);
         startXmit.setLabel( "Start Transmission");          
         } else if( source == rtcp) {
         if( rtcpViewer == null) {
         rtcpViewer= new RTCPViewer();
         } else {
              rtcpViewer.setVisible( true);
              rtcpViewer.toFront();
         } else if( source == cb_loop) {
         if( avTransmitter != null) {
              avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
         String localPort= tf_data_port.getText().trim();
         for( int i= targets.size(); i > 0;) {
         Target target= (Target) targets.elementAt( i - 1);
         if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
         i--;
    public void addTargetToList( String localPort,
                             String ip, String port) {     
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
                                  port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);           
    public void rtcpReport( String report) {
         if( rtcpViewer != null) {
         rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
         config.local_data_port= tf_data_port.getText().trim();
         config.targets= new Vector();
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( config.local_data_port)) {
              config.addTarget( target.ip, target.port);
         config.media_locator= tf_media_file.getText().trim();
         config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              tf_remote_address.setText( target.ip);
              tf_remote_data_port.setText( target.port);
         int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
         this.options= options;
    public int getSize() {
         int size;
         if( options == null) {
         size= 0;
         } else {
         size= options.size();
         return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
         Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
         } else {
         name= null;
         return name;
    public void setData( Vector data) {
         options= data;
         fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
                   TargetListModel listModel, Vector targets) {
         this.localPort= localPort;
         this.ip= ip;
         this.port= port;
         this.listModel= listModel;
         this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
         if( !targetExists( localPort, ip, port)) {
         targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
         boolean exists= false;
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( localPort)
         && target.ip.equals( ip)
              && target.port.equals( port)) {          
              exists= true;
         break;
         return exists;
    >>>>>>>>>>>>>>>>>
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
         this.tx= tx;
         local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
         String result;
         locator= new MediaLocator( filename);
         // Create a processor for the specified media locator
         // and program it to output JPEG/RTP
         result = createProcessor();
         if (result != null) {
         return result;
         // Create an RTP session to transmit the output of the
         // processor to the specified IP address and port no.
         result = createTransmitter( targets);
         if (result != null) {
         processor.close();
         processor = null;
         return result;
         // Start the transmission
         processor.start();
         return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
         // Cheated. Should have checked the type.
         PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
         PushBufferStream pbss[] = pbds.getStreams();
         rtpMgrs = new RTPManager[pbss.length];
         localPorts = new int[ pbss.length];
         SessionAddress localAddr, destAddr;
         InetAddress ipAddr;
         SendStream sendStream;
         int port;
         SourceDescription srcDesList[];
         for (int i = 0; i < pbss.length; i++) {
         // for (int i = 0; i < 1; i++) {
         try {
              rtpMgrs[i] = RTPManager.newInstance();     
              port = local_data_port + 2*i;
              localPorts[ i]= port;
              localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                  port);
              rtpMgrs.initialize( localAddr);          
              rtpMgrs[i].addReceiveStreamListener(this);
              rtpMgrs[i].addRemoteListener(this);
         for( int k= 0; k < targets.size(); k++) {
              Target target= (Target) targets.elementAt( k);
              int targetPort= new Integer( target.port).intValue();
              addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
              sendStream = rtpMgrs[i].createSendStream(dataOutput, i);          
              sendStream.start();
         } catch (Exception e) {
              e.printStackTrace();
              return e.getMessage();
         return null;
    public void addTarget( String ip, String port) {
         for (int i= 0; i < rtpMgrs.length; i++) {
         int targetPort= new Integer( port).intValue();
         addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
         try {
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         mgr.addTarget( addr);
         tx.addTargetToList( localPort + "", ip, port + "");
         } catch( Exception e) {
         e.printStackTrace();
    public void removeTarget( String ip, String port) {
         try {     
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
         } catch( Exception e) {
         e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
         System.out.println( ce);
         if( ce instanceof DurationUpdateEvent) {
         Time duration= ((DurationUpdateEvent) ce).getDuration();
         System.out.println( "duration: " + duration.getSeconds());
         } else if( ce instanceof EndOfMediaEvent) {
         System.out.println( "END OF MEDIA - looping=" + looping);
         if( looping) {
         processor.setMediaTime( new Time( 0));
              processor.start();
    public void setLooping( boolean flag) {
         looping= flag;
    public void update( ReceiveStreamEvent event) {
         String timestamp= getTimestamp();
         StringBuffer sb= new StringBuffer();
         if( event instanceof InactiveReceiveStreamEvent) {
         sb.append( timestamp + " Inactive Receive Stream");
         } else if( event instanceof ByeEvent) {
         sb.append( timestamp + " Bye");
         } else {
         System.out.println( "ReceiveStreamEvent: "+ event);
         tx.rtcpReport( sb.toString());     
    public void update( RemoteEvent event) {     
         String timestamp= getTimestamp();
         if( event instanceof ReceiverReportEvent) {
         ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
         StringBuffer sb= new StringBuffer();
         sb.append( timestamp + " RR");
         if( rr != null) {
              Participant participant= rr.getParticipant();
              if( participant != null) {
              sb.append( " from " + participant.getCNAME());
              sb.append( " ssrc=" + rr.getSSRC());
              } else {
              sb.append( " ssrc=" + rr.getSSRC());
              tx.rtcpReport( sb.toString());
         } else {
         System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
         String timestamp;
         Calendar calendar= Calendar.getInstance();
         int hour= calendar.get( Calendar.HOUR_OF_DAY);
         String hourStr= formatTime( hour);
         int minute= calendar.get( Calendar.MINUTE);
         String minuteStr= formatTime( minute);
         int second= calendar.get( Calendar.SECOND);
         String secondStr= formatTime( second);
         timestamp= hourStr + ":" + minuteStr + ":" + secondStr;     
         return timestamp;
    private String formatTime( int time) {     
         String timeStr;
         if( time < 10) {
         timeStr= "0" + time;
         } else {
         timeStr= "" + time;
         return timeStr;
    * Stops the transmission if already started
    public void stop() {
         synchronized (this) {
         if (processor != null) {
              processor.stop();
              processor.close();
              processor = null;
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTargets( "Session ended.");
              rtpMgrs[ i].dispose();
    public String createProcessor() {
         if (locator == null) {
         return "Locator is null";
         DataSource ds;
         DataSource clone;
         try {
         ds = javax.media.Manager.createDataSource(locator);
         } catch (Exception e) {
         return "Couldn't create DataSource";
         // Try to create a processor to handle the input media locator
         try {
         processor = javax.media.Manager.createProcessor(ds);
         processor.addControllerListener( this);     
         } catch (NoProcessorException npe) {
         return "Couldn't create processor";
         } catch (IOException ioe) {
         return "IOException creating processor";
         // Wait for it to configure
         boolean result = waitForState(processor, Processor.Configured);
         if (result == false)
         return "Couldn't configure processor";
         // Get the tracks from the processor
         TrackControl [] tracks = processor.getTrackControls();
         // Do we have atleast one track?
         if (tracks == null || tracks.length < 1)
         return "Couldn't find tracks in processor";
         // Set the output content descriptor to RAW_RTP
         // This will limit the supported formats reported from
         // Track.getSupportedFormats to only valid RTP formats.
         ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
         processor.setContentDescriptor(cd);
         Format supported[];
         Format chosen;
         boolean atLeastOneTrack = false;
         // Program the tracks.
         for (int i = 0; i < tracks.length; i++) {
         Format format = tracks[i].getFormat();
         if (tracks[i].isEnabled()) {
              supported = tracks[i].getSupportedFormats();
              // We've set the output content to the RAW_RTP.
              // So all the supported formats should work with RTP.
              // We'll just pick the first one.
              if (supported.length > 0) {
              if (supported[0] instanceof VideoFormat) {
                   // For video formats, we should double check the
                   // sizes since not all formats work in all sizes.
                   chosen = checkForVideoSizes(tracks[i].getFormat(),
                                       supported[0]);
              } else
                   chosen = supported[0];
              tracks[i].setFormat(chosen);
              System.err.println("Track " + i + " is set to transmit as:");
              System.err.println(" " + chosen);
              atLeastOneTrack = true;
              } else
              tracks[i].setEnabled(false);
         } else
              tracks[i].setEnabled(false);
         if (!atLeastOneTrack)
         return "Couldn't set any of the tracks to a valid RTP format";
         // Realize the processor. This will internally create a flow
         // graph and attempt to create an output datasource for JPEG/RTP
         // audio frames.
         result = waitForState(processor, Controller.Realized);
         if (result == false)
         return "Couldn't realize processor";
         // Set the JPEG quality to .5.
         setJPEGQuality(processor, 0.5f);
         // Get the output data source of the processor
         dataOutput = processor.getDataOutput();
         return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
         int width, height;
         Dimension size = ((VideoFormat)original).getSize();
         Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
         Format h263Fmt = new Format(VideoFormat.H263_RTP);
         if (supported.matches(jpegFmt)) {
         // For JPEG, make sure width and height are divisible by 8.
         width = (size.width % 8 == 0 ? size.width :
                        (int)(size.width / 8) * 8);
         height = (size.height % 8 == 0 ? size.height :
                        (int)(size.height / 8) * 8);
         } else if (supported.matches(h263Fmt)) {
         // For H.263, we only support some specific sizes.
         if (size.width < 128) {
              width = 128;
              height = 96;
         } else if (size.width < 176) {
              width = 176;
              height = 144;
         } else {
              width = 352;
              height = 288;
         } else {
         // We don't know this particular format. We'll just
         // leave it alone then.
         return supported;
         return (new VideoFormat(null,
                        new Dimension(width, height),
                        Format.NOT_SPECIFIED,
                        null,
                        Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
         Control cs[] = p.getControls();
         QualityControl qc = null;
         VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
         // Loop through the controls to find the Quality control for
         // the JPEG encoder.
         for (int i = 0; i < cs.length; i++) {
         if (cs[i] instanceof QualityControl &&
              cs[i] instanceof Owned) {
              Object owner = ((Owned)cs[i]).getOwner();
              // Check to see if the owner is a Codec.
              // Then check for the output format.
              if (owner instanceof Codec) {
              Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
              for (int j = 0; j < fmts.length; j++) {
                   if (fmts[j].matches(jpegFmt)) {
                   qc = (QualityControl)cs[i];
                   qc.setQuality(val);
                   System.err.println("- Setting quality to " +
                             val + " on " + qc);
                   break;
              if (qc != null)
              break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
         return stateLock;
    void setFailed() {
         failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
         p.addControllerListener(new StateListener());
         failed = false;
         // Call the required method on the processor
         if (state == Processor.Configured) {
         p.configure();
         } else if (state == Processor.Realized) {
         p.realize();
         // Wait until we get an event that confirms the
         // success of the method, or a failure event.
         // See StateListener inner class
         while (p.getState() < state && !failed) {
         synchronized (getStateLock()) {
              try {
              getStateLock().wait();
              } catch (InterruptedException ie) {
              return false;
         if (failed)
         return false;
         else
         return true;
    * Inner Classes
    class StateListener implements ControllerListener {
         public void controllerUpdate(ControllerEvent ce) {
         // If there was an error during configure or
         // realiz

    I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
    Hope It Works

  • Exporting audio and video together for Mpeg2 dvd

    Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed  multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

    To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Splitting an audio and video file

    i know before quicktime 7 came out you could split the audio and video track and stuff. can you still do that. i have a music video of live stuff and i want the audio from it. i also have final cut, garage band, and all those fancy programs so if you can do it there i would appriciate some knowledge thrown my way.

    yes well im not supposed to be doing this but its a locked aac audio file. i downloaded it off itunes but my girls birthday is commin up and i need the audio half of it for a thing im doin. so i figure if i dont let anyone else have it its ok becaus i bought it. um the video is avc0 media. i can use a screen shot to show all of it.

  • When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

    When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other.  This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

  • Extra hardware interface for transmiting both Audio and video to client ??

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for Transmitting  both Audio and video to client im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
    config= new Config();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    JPanel p= new JPanel();
    p.setLayout( gridBagLayout);
    JPanel localPanel= createLocalPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 0;
    gbc.gridy= 0;
    gbc.gridwidth= 2;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
    p.add( localPanel);
    JPanel targetPanel= createTargetPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 1;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
    JPanel mediaPanel= createMediaPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 2;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
    update.setEnabled( false);
    rtcp.addActionListener( this);
    update.addActionListener( this);
    buttonPanel.add( rtcp);
    buttonPanel.add( update);
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 3;
    gbc.gridwidth= 2;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
    p.add( buttonPanel);
    getContentPane().add( p);
    list.addMouseListener( this);
    addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    JLabel label= new JLabel( "Media Locator:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    tf_media_file= new JTextField( 35);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
    p.add( tf_media_file);
    tf_media_file.setText( config.media_locator);
    cb_loop= new JCheckBox( "loop");
    startXmit= new JButton( "Start Transmission");
    startXmit.setEnabled( true);
    startXmit.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 2;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
    p.add( cb_loop);
    cb_loop.setSelected( true);
    cb_loop.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
    p.add( startXmit);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
    p.setBorder( titledBorder);
    return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    targets= new Vector();
    for( int i= 0; i < config.targets.size(); i++) {
    targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
    list.addKeyListener( this);
    list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
    gbc= new GridBagConstraints();
    gbc.gridx= 0;
    gbc.gridy= 0;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
    p.add( scrollPane);
    JPanel p1= new JPanel();
    p1.setLayout( gridBagLayout);
    JLabel label= new JLabel( "IP Address:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
    p1.add( label);
    tf_remote_address= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
    p1.add( tf_remote_address);
    label= new JLabel( "Data Port:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
    p1.add( label);
    tf_remote_data_port= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
    p1.add( tf_remote_data_port);
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");
    removeTarget= new JButton( "Remove Target");
    p2.add( addTarget);
    p2.add( removeTarget);
    addTarget.addActionListener( this);
    removeTarget.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 2;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.gridwidth= 2;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 20,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
    p1.add( p2);
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 0;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
    p.add( p1);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
    p.setBorder( titledBorder);
    return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    JLabel label= new JLabel( "IP Address:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    JTextField tf_local_host= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
    p.add( tf_local_host);
    try {
    String host= InetAddress.getLocalHost().getHostAddress();
    tf_local_host.setText( host);
    } catch( UnknownHostException e) {
    label= new JLabel( "Data Port:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    tf_data_port= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
    p.add( tf_data_port);
    tf_data_port.setText( config.local_data_port);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
    p.setBorder( titledBorder);
    return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
    if( source == addTarget) {
    String ip= tf_remote_address.getText().trim();
    String port= tf_remote_data_port.getText().trim();
    String localPort= tf_data_port.getText().trim();
    addTargetToList( localPort, ip, port);
    if( avTransmitter != null) {
    avTransmitter.addTarget( ip, port);
    } else if( source == removeTarget) {
    int index= list.getSelectedIndex();
    if( index != -1) {
    Target target= (Target) targets.elementAt( index);
    if( avTransmitter != null) {
    avTransmitter.removeTarget( target.ip, target.port);
    targets.removeElement( target);
    listModel.setData( targets);
    } else if( source == startXmit) {
    if( startXmit.getLabel().equals( "Start Transmission")) {
    int data_port= new Integer( tf_data_port.getText()).intValue();
    avTransmitter= new AVTransmitter( this, data_port);
    avTransmitter.start( tf_media_file.getText().trim(), targets);
    avTransmitter.setLooping( cb_loop.isSelected());
    startXmit.setLabel( "Stop Transmission");
    } else if( startXmit.getLabel().equals( "Stop Transmission")) {
    avTransmitter.stop();
    avTransmitter= null;
    removeNonBaseTargets();
    listModel.setData( targets);
    startXmit.setLabel( "Start Transmission");
    } else if( source == rtcp) {
    if( rtcpViewer == null) {
    rtcpViewer= new RTCPViewer();
    } else {
    rtcpViewer.setVisible( true);
    rtcpViewer.toFront();
    } else if( source == cb_loop) {
    if( avTransmitter != null) {
    avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
    String localPort= tf_data_port.getText().trim();
    for( int i= targets.size(); i > 0;) {
    Target target= (Target) targets.elementAt( i - 1);
    if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
    i--;
    public void addTargetToList( String localPort,
    String ip, String port) {
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
    port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);
    public void rtcpReport( String report) {
    if( rtcpViewer != null) {
    rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
    config.local_data_port= tf_data_port.getText().trim();
    config.targets= new Vector();
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    if( target.localPort.equals( config.local_data_port)) {
    config.addTarget( target.ip, target.port);
    config.media_locator= tf_media_file.getText().trim();
    config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
    if( source == list) {
    int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
    if( source == list) {
    int index= list.getSelectedIndex();
    if( index != -1) {
    Target target= (Target) targets.elementAt( index);
    tf_remote_address.setText( target.ip);
    tf_remote_data_port.setText( target.port);
    int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
    this.options= options;
    public int getSize() {
    int size;
    if( options == null) {
    size= 0;
    } else {
    size= options.size();
    return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
    Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
    } else {
    name= null;
    return name;
    public void setData( Vector data) {
    options= data;
    fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
    TargetListModel listModel, Vector targets) {
    this.localPort= localPort;
    this.ip= ip;
    this.port= port;
    this.listModel= listModel;
    this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
    if( !targetExists( localPort, ip, port)) {
    targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
    boolean exists= false;
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    if( target.localPort.equals( localPort)
    && target.ip.equals( ip)
    && target.port.equals( port)) {
    exists= true;
    break;
    return exists;
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
    this.tx= tx;
    local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
    String result;
    locator= new MediaLocator( filename);
    // Create a processor for the specified media locator
    // and program it to output JPEG/RTP
    result = createProcessor();
    if (result != null) {
    return result;
    // Create an RTP session to transmit the output of the
    // processor to the specified IP address and port no.
    result = createTransmitter( targets);
    if (result != null) {
    processor.close();
    processor = null;
    return result;
    // Start the transmission
    processor.start();
    return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
    // Cheated. Should have checked the type.
    PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
    PushBufferStream pbss[] = pbds.getStreams();
    rtpMgrs = new RTPManager[pbss.length];
    localPorts = new int[ pbss.length];
    SessionAddress localAddr, destAddr;
    InetAddress ipAddr;
    SendStream sendStream;
    int port;
    SourceDescription srcDesList[];
    for (int i = 0; i < pbss.length; i++) {
    // for (int i = 0; i < 1; i++) {
    try {
    rtpMgrs[i] = RTPManager.newInstance();
    port = local_data_port + 2*i;
    localPorts[ i]= port;
    localAddr = new SessionAddress( InetAddress.getLocalHost(),
    port);
    rtpMgrs.initialize( localAddr);
    rtpMgrs[i].addReceiveStreamListener(this);
    rtpMgrs[i].addRemoteListener(this);
    for( int k= 0; k < targets.size(); k++) {
    Target target= (Target) targets.elementAt( k);
    int targetPort= new Integer( target.port).intValue();
    addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
    sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
    sendStream.start();
    } catch (Exception e) {
    e.printStackTrace();
    return e.getMessage();
    return null;
    public void addTarget( String ip, String port) {
    for (int i= 0; i < rtpMgrs.length; i++) {
    int targetPort= new Integer( port).intValue();
    addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
    try {
    SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
    new Integer( port).intValue());
    mgr.addTarget( addr);
    tx.addTargetToList( localPort + "", ip, port + "");
    } catch( Exception e) {
    e.printStackTrace();
    public void removeTarget( String ip, String port) {
    try {
    SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
    new Integer( port).intValue());
    for (int i= 0; i < rtpMgrs.length; i++) {
    rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
    } catch( Exception e) {
    e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
    System.out.println( ce);
    if( ce instanceof DurationUpdateEvent) {
    Time duration= ((DurationUpdateEvent) ce).getDuration();
    System.out.println( "duration: " + duration.getSeconds());
    } else if( ce instanceof EndOfMediaEvent) {
    System.out.println( "END OF MEDIA - looping=" + looping);
    if( looping) {
    processor.setMediaTime( new Time( 0));
    processor.start();
    public void setLooping( boolean flag) {
    looping= flag;
    public void update( ReceiveStreamEvent event) {
    String timestamp= getTimestamp();
    StringBuffer sb= new StringBuffer();
    if( event instanceof InactiveReceiveStreamEvent) {
    sb.append( timestamp + " Inactive Receive Stream");
    } else if( event instanceof ByeEvent) {
    sb.append( timestamp + " Bye");
    } else {
    System.out.println( "ReceiveStreamEvent: "+ event);
    tx.rtcpReport( sb.toString());
    public void update( RemoteEvent event) {
    String timestamp= getTimestamp();
    if( event instanceof ReceiverReportEvent) {
    ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
    StringBuffer sb= new StringBuffer();
    sb.append( timestamp + " RR");
    if( rr != null) {
    Participant participant= rr.getParticipant();
    if( participant != null) {
    sb.append( " from " + participant.getCNAME());
    sb.append( " ssrc=" + rr.getSSRC());
    } else {
    sb.append( " ssrc=" + rr.getSSRC());
    tx.rtcpReport( sb.toString());
    } else {
    System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
    String timestamp;
    Calendar calendar= Calendar.getInstance();
    int hour= calendar.get( Calendar.HOUR_OF_DAY);
    String hourStr= formatTime( hour);
    int minute= calendar.get( Calendar.MINUTE);
    String minuteStr= formatTime( minute);
    int second= calendar.get( Calendar.SECOND);
    String secondStr= formatTime( second);
    timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
    return timestamp;
    private String formatTime( int time) {
    String timeStr;
    if( time < 10) {
    timeStr= "0" + time;
    } else {
    timeStr= "" + time;
    return timeStr;
    * Stops the transmission if already started
    public void stop() {
    synchronized (this) {
    if (processor != null) {
    processor.stop();
    processor.close();
    processor = null;
    for (int i= 0; i < rtpMgrs.length; i++) {
    rtpMgrs[ i].removeTargets( "Session ended.");
    rtpMgrs[ i].dispose();
    public String createProcessor() {
    if (locator == null) {
    return "Locator is null";
    DataSource ds;
    DataSource clone;
    try {
    ds = javax.media.Manager.createDataSource(locator);
    } catch (Exception e) {
    return "Couldn't create DataSource";
    // Try to create a processor to handle the input media locator
    try {
    processor = javax.media.Manager.createProcessor(ds);
    processor.addControllerListener( this);
    } catch (NoProcessorException npe) {
    return "Couldn't create processor";
    } catch (IOException ioe) {
    return "IOException creating processor";
    // Wait for it to configure
    boolean result = waitForState(processor, Processor.Configured);
    if (result == false)
    return "Couldn't configure processor";
    // Get the tracks from the processor
    TrackControl [] tracks = processor.getTrackControls();
    // Do we have atleast one track?
    if (tracks == null || tracks.length < 1)
    return "Couldn't find tracks in processor";
    // Set the output content descriptor to RAW_RTP
    // This will limit the supported formats reported from
    // Track.getSupportedFormats to only valid RTP formats.
    ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
    processor.setContentDescriptor(cd);
    Format supported[];
    Format chosen;
    boolean atLeastOneTrack = false;
    // Program the tracks.
    for (int i = 0; i < tracks.length; i++) {
    Format format = tracks[i].getFormat();
    if (tracks[i].isEnabled()) {
    supported = tracks[i].getSupportedFormats();
    // We've set the output content to the RAW_RTP.
    // So all the supported formats should work with RTP.
    // We'll just pick the first one.
    if (supported.length > 0) {
    if (supported[0] instanceof VideoFormat) {
    // For video formats, we should double check the
    // sizes since not all formats work in all sizes.
    chosen = checkForVideoSizes(tracks[i].getFormat(),
    supported[0]);
    } else
    chosen = supported[0];
    tracks[i].setFormat(chosen);
    System.err.println("Track " + i + " is set to transmit as:");
    System.err.println(" " + chosen);
    atLeastOneTrack = true;
    } else
    tracks[i].setEnabled(false);
    } else
    tracks[i].setEnabled(false);
    if (!atLeastOneTrack)
    return "Couldn't set any of the tracks to a valid RTP format";
    // Realize the processor. This will internally create a flow
    // graph and attempt to create an output datasource for JPEG/RTP
    // audio frames.
    result = waitForState(processor, Controller.Realized);
    if (result == false)
    return "Couldn't realize processor";
    // Set the JPEG quality to .5.
    setJPEGQuality(processor, 0.5f);
    // Get the output data source of the processor
    dataOutput = processor.getDataOutput();
    return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
    int width, height;
    Dimension size = ((VideoFormat)original).getSize();
    Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
    Format h263Fmt = new Format(VideoFormat.H263_RTP);
    if (supported.matches(jpegFmt)) {
    // For JPEG, make sure width and height are divisible by 8.
    width = (size.width % 8 == 0 ? size.width :
    (int)(size.width / 8) * 8);
    height = (size.height % 8 == 0 ? size.height :
    (int)(size.height / 8) * 8);
    } else if (supported.matches(h263Fmt)) {
    // For H.263, we only support some specific sizes.
    if (size.width < 128) {
    width = 128;
    height = 96;
    } else if (size.width < 176) {
    width = 176;
    height = 144;
    } else {
    width = 352;
    height = 288;
    } else {
    // We don't know this particular format. We'll just
    // leave it alone then.
    return supported;
    return (new VideoFormat(null,
    new Dimension(width, height),
    Format.NOT_SPECIFIED,
    null,
    Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
    Control cs[] = p.getControls();
    QualityControl qc = null;
    VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
    // Loop through the controls to find the Quality control for
    // the JPEG encoder.
    for (int i = 0; i < cs.length; i++) {
    if (cs[i] instanceof QualityControl &&
    cs[i] instanceof Owned) {
    Object owner = ((Owned)cs[i]).getOwner();
    // Check to see if the owner is a Codec.
    // Then check for the output format.
    if (owner instanceof Codec) {
    Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
    for (int j = 0; j < fmts.length; j++) {
    if (fmts[j].matches(jpegFmt)) {
    qc = (QualityControl)cs[i];
    qc.setQuality(val);
    System.err.println("- Setting quality to " +
    val + " on " + qc);
    break;
    if (qc != null)
    break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
    return stateLock;
    void setFailed() {
    failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
    p.addControllerListener(new StateListener());
    failed = false;
    // Call the required method on the processor
    if (state == Processor.Configured) {
    p.configure();
    } else if (state == Processor.Realized) {
    p.realize();
    // Wait until we get an event that confirms the
    // success of the method, or a failure event.
    // See StateListener inner class
    while (p.getState() < state && !failed) {
    synchronized (getStateLock()) {
    try {
    getStateLock().wait();
    } catch (InterruptedException ie) {
    return false;
    if (failed)
    return false;
    else
    return true;
    * Inner Classes
    class StateListener implements ControllerListener {
    public void controllerUpdate(ControllerEvent ce) {
    // If there was an error during configure or
    // realize, the processor will be closed
    if (ce instanceof ControllerClosedEvent)
    setFailed();
    // All controller events, send a notification
    // to the waiting thread in waitForState method.
    if (ce instanceof ControllerEvent) {
    synchronized (getStateLock()) {
    getStateLock().notifyAll();
    import java.io.*;
    import java.util.*;
    public class Config {
    private String pathPrefix;
    public String local_data_port;
    public Vector targets;
    public String media_locator;
    public Config() {
    pathPrefix= System.getProperty( "user.home") + File.separator;
    read();
    public void read() {
    targets= new Vector();
    try {
    String path= pathPrefix + "xmit.dat";
    FileInputStream fin= new FileInputStream( path);
    BufferedInputStream bin= new BufferedInputStream( fin);
    DataInputStream din= new DataInputStream( bin);
    local_data_port= readString( din);
    int n_targets= din.readInt();
    for( int i= 0; i < n_targets; i++) {
    String ip= readString( din);
    String port= readString( din);
    targets.addElement( new Target( local_data_port, ip, port));
    media_locator= readString( din);
    fin.close();
    } catch( IOException e) {
    System.out.println( "xmit.dat file missing!");
    local_data_port= "";
    media_locator= "";
    public void write() {
    try {
    String path= pathPrefix + "xmit.dat";
    FileOutputStream fout= new FileOutputStream( path);
    BufferedOutputStream bout= new BufferedOutputStream( fout);
    DataOutputStream dout= new DataOutputStream( bout);
    writeString( dout, local_data_port);
    dout.writeInt( targets.size());
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    writeString( dout, target.ip);
    writeString( dout, target.port);
    writeString( dout, media_locator);
    dout.flush();
    dout.close();
    fout.close();
    } catch( IOException e) {
    System.out.println( "Error writing xmit.dat!");
    public String readString( DataInputStream din) {
    String s= null;
    try {
    short length= din.readShort();
    if( length > 0) {
    byte buf[]= new byte[ length];
    din.read( buf, 0, length);
    s= new String( buf);
    } catch( IOException e) {
    System.err.println( e);
    return s;
    public void writeString( DataOutputStream dout, String str) {
    try {
    if( str != null) {
    dout.writeShort( str.length());
    dout.writeBytes( str);
    } else {
    dout.writeShort( 0);
    } catch( Exception e) {
    e.printStackTrace();
    public void addTarget( String ip, String port) {
    targets.addElement( new Target( "", ip, port));
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class RTCPViewer extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    private JList list;
    private Vector reports;
    private RtcpListModel listModel;
    private JButton clear;
    private JButton start;
    private boolean recording;
    public RTCPViewer() {
    setTitle( "JMF/RTCP Tracer");
    re

    I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
    Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

Maybe you are looking for

  • Have a look at code!!

    I want to draw a rectangle in an applet and trace the mouse pressed action only inside that rectangle To achive this i have created 2 classes 1.Class Rect This class extends Component and used to draw the Rectangle using drawRect() method and used to

  • Tables for rule sets

    Hi, Can you provide me the tables used for rule sets, activities, task etc in EM

  • How to display clear screenshots in PDF when default Acrobat page resolution is 110 ppi?

    I want screenshots captured on my 96 ppi screen to display clearly in the PDF. But the Acrobat default page resolution display is configured to 110 ppi, not to the system setting of 96 ppi. 1) Why is the Acrobat default display 110 ppi and not 96 ppi

  • Refreshing Progress Indicator during calculation loop (WD ABAP)

    Hi everybody, I want to use the ProgressIndicator UI Element on one of my Views. But when setting a new percent value during my calculation this does not lead to a refresh of the indicator on the screen, hence I can only see the 0% and 100% state aft

  • Connecting to OPC Server

    Hi, I'm a newbie to DSC module and i have a question on OPC connectivity. With the base Labview (non-DSC) you can connect to OPC servers through Datasockets, although I understand that Datasockets is not a true OPC client and there are some limitatio