Splitting does not work on a networked drive.

My iPhoto Library is on a following networked drive connected by cat6.
Linux:CentOS 4.2+samba 3.0.10-1.4E.12.2.
In this environment, splitting photos does not work. When splitting photos, initially photos are splitted into two events. Then I change a event's name from 'untitled event' to something.
After that, new directory is created automatically to store photos of new event, and then photos of a new events are moved into this new directory. However, in actuality, new direcotory was created and was renamed, but none of photo was moved from an original event directory into a new directory. As a result, iPhoto lost links for these photos, and I can't access these photos any more.
I think permission of iPhoto Library is correct. Because I can add, edit and delete photos manually within iPhoto.
As a workaround, I create a new event first manually, and then cut & paste photos into that from an existing event.
According to posted topics in this forum, it seems that iPhoto contains a problem when iPhoto Library is stored on a networked drive. Is this also an issue that only Apple can fix...?
Any hint would be grateful.
Thanks in advance.

My problem was also solved. The root cause of this problem was ':'. When splitting events, iPhoto attempts to create a folder named like '2007:08:16' temporarily. In my case, as I described my Library was stored on a Linux Server via the Samba. But the Samba refuses a folder name which is including ':'.
That's why, iPhoto was not able to create this temporary folder.
To solve this problem, you have to throw the Samba away and use another file sharing architecture. I decided to use netatalk. Netatalk can accept ':' as a folder name.
I already installed the netatalk on my Linux Server actually and tried splitting events. As a result, iPhoto was able to split events as expected.
FYI:
From my understanding, most of NAS products are using the Samba as their architecture. People using NAS has a possibility to face this problem.

Similar Messages

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Network does not work or the network signal attenuates rapidly

Network does not work or the network signal attenuates rapidly

Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HP 932C PRINTER DOES NOT WORK OVER A NETWORK WITH TWO DIFFERENT OPERATIONAL SYSTEMS.

I have a 932c HP printer connected via USB to a Windows XP desktop computer (Dell E520), which is part of a home network.
I also have an HP Pavilion dv5 notebook, running Windows Vista Home Premium 64-bit, connected to the same network. This notebook can find the printer over the network. However, when I try to capture the 932c printer, the following dialog box appears:
"The server for the `hp deskjet 930c series` printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipmente manufacturer for the correct printer driver."
When I click OK, another dialog box appears:
"The file `*.INF`on (Unknown) is needed. Type the path where the file is located, and then click OK."
However, I can't find any workable *.inf file in the HP notebook Hard drive (both partitions).
I have already tried to download the driver from the HP website, but it says that Windows Vista already has the driver for such printer! Well, now I'm stucked!
I'd like to point out that the printer works fine if I plug it directly to the HP notebook's USB port. But I want to operate the printer via the home network, keeping it hooked to the Windows XP desktop computer.
How to solve this problem? Thanks.

This is the HP notebook forums. I would recommend posting this in the printer forums for better coverage.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Datasocket does not work with two network cards

If I have two ethernet card in a PC. The Datasocket server does not work if the second card is enabled. It keeps displaying resolving IP Address. I am wondering if there is a solution for this problem.
Thanks

Thanks for you reply. One card has a static address(10.20.35.1), which is used for Data socket, and the other card uses a dynamic IP address. The card with dynamic address is only used for connecting the PC to the company’s network.
The second card, when turned on causes the Datasocket server problem. In the Datasocket Server manager I have only two IP addresses under Permissions Groups. (10.20.35.1 and 10.20.35.11. 10.20.35.11 is the IP address of the remote PC with labview application. The Datasocket is used to transfer data between the two PC’s)
I am wondering if my set up for hosts in Datasocket Server manager is not correct.

Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

Hi,
Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
In order to make mails workin' I need to be connected to a Wifi network.
All setting are correct on the phone.
How can I fix this **** issue.
Deleted the icloud account already and added it again but that does not help.
Also when I try to connect to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
The password is correct.
Please help me.
Jerry

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Application Builder does not work with Eurotherm 24XX-Driver

Hi,
I have to programm the software for a new teststation including some Eurotherm 2216 and a Keithley 2700-instrument in Labview 8.0.
Labview offers drivers for the Keithley 2700 instrument and a driver for the Eurotherm 24XX-series that works well with the Eurotherm 2216.
But if I try to build an application with the application builder, I receive an error message:
The following files include incorrect links to help files. Open the files and correct the links:
C:\Programme\National Instruments\LabVIEW 8.0\instr.lib\ET24XX\_ET24XX.llb\ET24XX Utility Multiple Write To Registers - Floating Point.vi
I checked this file - there are no links to help files included.
I receive a similar error message for the Keithley-Driver.
I attached the file making the problem.
Would be fine, if someone could help me.
Attachments:
Eurotherm testen ohne Messwerterfassung.vi ‏10 KB

Hi,
I had the same error with my application after I transferred it from LV7 to LV8. I used some external files for documentation of the VI's. LV8 does not find these files anymore (old and new location) Open the VI and add the help file again.
Hope this helps.

Envy 2 Since 8.1 update keyboard does not work right did several driver updates with no results?

I even restored to factory settings, can i go back to 8.0 if Hp and Ms can't get it right?

Pete,
The invitation to Upgrade to Windows 8.1 comes from Microsoft.
If you did not make backups, you might be able to order replacement Media from HP.
You may find Recovery Media at your computer's website. Start at:
HP Drivers & Downloads
If available, the Media has its own category: Order Recovery Media
==========================================================================
If you cannot find it, or you are outside of the US / Canada, you can call HP directly:
Worldwide Support Portal
Contact HP – USA - Phone Assistance
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
============================================================================
Microsoft does care about their customers. Microsoft's enthusiasm for Windows 8.1 might have overshadowed their inclination to warn you that not EVERY computer on the planet is able to run Windows 8.1 easily - or, in some cases, at all.
The Envy 2, IF you are talking about the Envy X2 - one of various models, should be able to run Windows 8.1 if some precautions are taken ahead of time.
For example:
Every driver must be updated to Windows 8.1 before you Upgrade
Most user installed programs should be removed
Most user settings should be set back to standard. For example, set a standard background, do not expect your fancy Start Screen settings to survive, back up and strip the stuff from your Desktop.
All connected devices must be removed.
Security software must be removed.
You should not attempt the Upgrade without having the means to get back to where you started. Translation: Make Backups - Make Backups - Make Backups
The following might help you if you want to try again:
Upgrade Windows 8 to Windows 8.1
Good Luck! Windows 8.1 is worth the journey if you can be successful.
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Kind Regards,
Dragon-Fur

Intel 7260 does not work on open networks/filtered ports

Hi Everyone! I made sure to check if this was posted before and tried to fix everything I could before asking you guys. For the past few days, I have been using Android wifi tethering as I was unable to get the speed up above 1000 B/s at my school. This means that the pings work, but I am unable to do anything else.
I have the latest kernel and the latest firmware (downloaded from the iwlwifi kernel.org section) and am currently using NetworkManager. My wifi works on my WPA network at home, but nowhere else. This is a fresh install of Arch running Gnome.
Laptop model: ASUS Q302LA
Outputs of my stuff:
lspci gives me:
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev cb)
uname -r is:
3.18.6-1-ARCH
Config on the settings is all the automatic ones. I get the signal strength and the speed but data transfers at a ridiculously slow rate. When I had Windows, it was 50 Mb/S.
If you need anything else, I can give you all you need.
All ports are filtered.
Thank you for helping. If this is in the wrong section, feel free to move it.

For people that end up stumbling upon this thread: I talked to the IT director at my school and he said that it's normal for Linux (using open source drivers) users to find problems with connection. (Also, the USB wifi card I tried did not work.) As of now, it's a problem on the provider's end. If you can, ask them to update their "wifi stuff" and if that doesn't work, see if you can get them to secure the network with WPA2/PSK. (Probably won't happen) I was fortunate that I contacted him during the planning phase for securing the wifi and only had to wait a few days.
Keep it Simple

T400: Internet does not work when switching networks unless reboot?

Hi everyone,
I can't seem to establish an internet connection when I switch networks (e.g., internet at work, then at home). It gives me an error saying "limited connectivity" or failed to renew IP. This happens for both wired and wireless connections.
I tried turning off the firewall (comodo internet security) along with the windows firewall. I tried letting windows handle all my internet connections. Yet the error still happens. So I just have to simply reboot my laptop, and everything works 100%.
I never had an issue like this with other laptops. Could this possibly have something to do with some of the bundled Lenovo software? I disabled most (if not all) of them since I barely use them.
Thanks for your help. This is my 1st thinkpad, and I'm enjoying it so far.

Hi gatorman1122,
I had a similar problem with my T400. What wifi card do you have installed?
I had an Intel 5300. Networking was OK with XP Pro installed, but messed up with either Vista Ultimate 32-bit or Vista Business 64-bit installed. All were Lenovo OS images. I tried 2 different 5300s.
I only saw the problem with wifi, but basically if I changed access points or changed from wired to wireless, the first attempt to use the (new) access point would fail to get an address. An immediate reboot would cause it to succeed.
I finally got the issue escalated to a 2nd-tier tech. He sent me a 5100 to try. That fixed it. I doubt it is a hardware issue. It is most likely a Vista/Intel/Lenovo software issue/conflict. IMNSHO, ThinkPad wifi w/Vista is a mess. One of the most fundamental laptop features should work much better than this. Many folks have T-series wifi problems and Lenovo seems to be ignoring it.
Just to add to the excitement, I told a friend buying two new T400s to order 5100s to avoid the problem. He did, and got the machines with XP installed. They both exhibited the same bad behavior Once he updated XP and all the Lenovo stuff, they started to work OK and have stayed OK. Grrrr.....
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BUG: Airtunes does not work on all networks

I have a brand new AX. When configured as a standalone wireless network for Airtunes, the iTunes errors out with "Unknown Error -15000" on 10.5.8, iTunes 8.2.1, IPV6:Auto, Firewall:Set to... or Allow all...
I only had two networks to test this feature on and Airtunes worked fine on an Airport based network but not on a non-Airport based one. The Tech specs say nothing about restrictions like this.

It sounds like the router controlling the network that you are attaching to is blocking that streaming traffic.

MSI X58 Pro: HDD LED does not work for S-ATA drive

Hi,
I've got a problem with my brand new MSI X58 Pro: I've got an S-ATA HDD (Samsung 640GB) and an S-ATA DVD drive (Pioneer) installed in a Compucase 6X Miditower. There is NO(!) IDE drive. I don't get the HDD LED to work! I've tried everything including a BIOS update to 7.1 - the LED stays out.
I found some reports in the internet from people having a similar problem: no HDD LED for S-ATA drive activity.
Is there anybody else having this problem? Isn't that possible in general? Is that a problem of the board? The HDD drive?
Greetings,
Michael

You are talking about the status LED on your case, right?
- Is it properly connected to the right pins on the correct header?
- Double-check for +/- pins and make sure the plug is not connected the wrong way.
- Make sure, the LED is not defective.
- Make sure the cables are not defective.
- Make sure there is no problem with the pin-plug to the board.

Code 6584 - alt/option does not work because of "network" problem

I cannot enter time machine - get a code 6584. When i verify the backup with the suggested alt/option key, I get a message that the Time machine verification was interrupted because of a network problem. After checking Airport utility I do not have a network probel, which brings me back to square one. Can anybody help?

Hello,
Hold the Alt/Option key while selecting the TM icon in your menubar.
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

C5 time does not work, even with network based tim...

Hi Nokia peoples,
When is the patch anticipated for our C5's to fix the broken clock problems?
If it just displayed the wrong time it would be one thing, but since it affects the ordering of text messages displayed et al, it's a bit more of a catastrophic issue.
Others have reported that hard resetting the device only lasts momentarily and that the bug is pretty fatal.
Thanks, please let us know the plan.

"Automatic time update" or Network based time update may not be available on all networks. check with some other operator sim

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

Splitting does not work on a networked drive.

Similar Messages

Maybe you are looking for