Splitting Emergency Address and Family Details into two application

Hi All,
I need a help to figure out how it can be achieved. We are having Ess_family_US application which will allow us to enter the details for all the subtypes we have entered in the backend Table. Now my client is asking to Split the application into two applications as:
1. Emergency Contact
2. Family details.
As they want these applications to be placed in different sections of ESS Overview Screen. More Specificly if i enter Emergency Details it should display and provide editing provision only for Emergency Contacts. In the same way for Family Details also.
Can any one guide me on this how we can approach and resolve it.
Thanks
Ravi Sunkara

Hi,
It can be possible thru Dynamic XSS Homepages with Static Services
for this you need to create the Dynamic XSS homepage ....
Following is the best document for this
Create Dynamic XSS Homepages with Static Services Using a Simple Proxy Class
/people/amir.madani/blog/2007/01/05/create-dynamic-xss-homepages-with-static-services-using-a-simple-proxy-class

Similar Messages

Script or operation to split a date and time channel into two channels

Hi There,
I have a channel that contains a range of dates and times.
I would like to split that channel into two channels - one with date and one with time.
Any suggestions?

Sorry: Here is the attachment......
and Sample of the data
Comment:
Date
Time
AIR TEMP
AIR TEMP SP
TAC PTC
Load Temp
Channel 4
UUT Front TC
1/20/2015
12:30:05
80.3
79.3
59.4
0
0
62.9
1/20/2015
12:30:11
80.1
79.3
59.5
0
0
63
1/20/2015
12:30:17
80
79.3
59.6
0
0
63
1/20/2015
12:30:23
79.9
79.3
59.7
0
0
63.1
1/20/2015
12:30:29
79.7
79.3
59.7
0
0
63.2
1/20/2015
12:30:35
79.7
79.3
59.8
0
0
63.4
1/20/2015
12:30:41
79.6
79.3
59.9
0
0
63.4
1/20/2015
12:30:47
79.6
79.3
60
0
0
63.5
1/20/2015
12:30:53
79.5
79.3
60
0
0
63.5
1/20/2015
12:30:59
79.5
79.3
60.2
0
0
63.6
1/20/2015
12:31:05
79.6
79.3
60.3
0
0
63.7
1/20/2015
12:31:11
79.6
79.3
60.3
0
0
63.7
1/20/2015
12:31:17
79.6
79.3
60.5
0
0
63.8
1/20/2015
12:31:23
79.7
79.3
60.6
0
0
63.9
1/20/2015
12:31:29
79.7
79.3
60.7
0
0
64
1/20/2015
12:31:35
79.8
79.3
60.8
0
0
64.1
1/20/2015
12:31:41
79.8
79.3
60.9
0
0
64.3
1/20/2015
12:31:47
79.8
79.3
61
0
0
64.4
1/20/2015
12:31:53
79.7
79.3
61.1
0
0
64.4
1/20/2015
12:31:59
79.7
79.3
61.2
0
0
64.5
1/20/2015
12:32:05
79.7
79.3
61.3
0
0
64.6
1/20/2015
12:32:11
79.6
79.3
61.4
0
0
64.7
1/20/2015
12:32:17
79.6
79.3
61.5
0
0
64.8
1/20/2015
12:32:23
79.6
79.3
61.6
0
0
64.8
1/20/2015
12:32:29
79.5
79.3
61.6
0
0
64.8
1/20/2015
12:32:35
79.5
79.3
61.7
0
0
64.8
1/20/2015
12:32:41
79.5
79.3
61.8
0
0
64.9

Splitting of dimensions into two applications

Dear all,
I've come across an artical in SDN says" The Application could be split into two applications POC_APP5 and POC_APP6 with less number of dimensions to expand. In turn would improve the performance of Input schedule and Reports."
Could you kindly tell me how to split dimensions into two sepatare application?
Based on artical:http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80af7a18-1672-2d10-d2a4-ae0900ed0cff
Regards,

Hi,
As said by Anurodh, the application split is basically when the application has huge data across all dimension members of the application having many dimensions.
for your below question,
Could you kindly tell me how to split dimensions into two separate application?
Consider you have a application with Dimensions,
Account, Time, Entity, Category, JobBand, Product
The above have data of Employees Jobband irrespective of Product
and details of product irrespective of JobBand.
This application can be splitted to two aplications having dimensions as below,
Account, Time, Entity, Category, Product
Account, Time, Entity, Category, JobBand
Hope this helps,
Regards,
G.Vijaya Kumar

Update Address and communication Details of BP

Hi,
Requirement is we need to update address and communication details of BP, please let us know relative BAPI for the same. Below roles has to be updated with given address and communication details,
General Role
Employee Role
Help full information will be appreciated..

Hi,
For updation of address you can use
BAPI_BUPA_ADDRESS_CHANGE.
I guess you cannot update a role . You can only add new roles with BAPI_BUPA_ROLE_ADD .
One more thing in address updation, Whatever fields are there in import parameter ( Address) you can update them even if they are not present in database.
But in case of Tables( Communication details) fields you can only update if the values are existing in database.
Reward if helpful.
Regards
Sourabh

Commission Agent Address and Bank details

Hi,
I know only the conduction group (VBRP-KDKG1)( value using this how we will find the address and bank details of commission Agent
Regards
Nausal

Dear Nausal,
Check whether
VBRP-KDKG1 = KNA1-KDKG1.
then get KNA1-ADRNR field.
from ADRC table u will get address of the bank by passing ADRNR field.
Regards,
Ravibabu.A

My iTunes account hacked, address and card details changed

I just recieved 2 emails informing me of 2 gift purchases of £5,000 yen. My iTunes is now in Japanese and my address and card details have been changed.
I have contacted iTunes support about this but god knows when I will get a reply.
I now dont trust iTunes enough to go in and change the account details.
Any clues as to how this has happened?

I just got a call from someone at the Apple Help Desk, and I gave him more information plus emailed him copies of the gift certificates which you can view in your purchase history. I printed them as PDFs and emailed them to him, you may also be able to take a screenshot. They seem to be serious about correcting this problem.
If you haven't already, I'd suggest you delete your credit card info from iTunes until we can determine how our accounts were compromised. I changed my password for the iTunes store. Apparently, changing the password for the store also changes the password for my .mac (mobileme) account so your email account will require you to input the new password.
I read somewhere that an account can get compromised from downloading music files from torrents. If the song file has some malicious code it can be executed when played in iTunes. Or possibly while downloading a torrent, a port is open on your computer that can leave you exposed. I don't if this is what has happened to me, but I can't rule it out either. I'm hoping that the attack was on Apple's side and that my computer wasn't compromised, but I'm trying to check my computer for any malware.
I've always assumed that since I use a Mac, my chance of getting affected by an outside attack is less, but I guess the danger is still there. So far, it appears that only my iTunes account has been affected, and nothing else.
Have you downloaded any files that might have compromised your computer?

With new Photos app, I can no longer drag and drop photos into other applications as I did in the past with iPhoto.

With the new Photos app, I can no longer drag and drop photos into other applications as I did with iPhoto. For instance, I have a photo collage app that in the past, I could just drag in the photos I wanted to include. Now, I can DRAG the photos, but they do not DROP. So, I have to go through the export process. It is tedious. What am I missing? Where can I turn on the drag and drop feature for Photos?

YOu're not looking in the right palce. That's inside the iPhoto Application.
You need to look inside the iPhoto Library
As I sid above:
Go to your Pictures Folder and find the iPhoto Library there
Regards
TD

BT Friends and Family details obtained by a 3rd pa...

In this article in the Guardian today, I read:
One former reporter claimed that Mulcaire was used on almost every story, if not for hacking into voicemail then for accessing confidential databases: "The paper was paying Glenn Mulcaire £2,000 a week, and they wanted their money's worth. For just about every story, they rang Glenn. It wasn't just tapping. It was routine. "Even if it was just a car crash or a house fire on a Saturday, they'd call Glenn, and he'd come back with ex-directory phone numbers, the BT list of friends and family and their addresses, lists of numbers called from their mobile phones.
How long has BT known about this? How seriously are they taking it? If it's true, then it's yet another piece of evidence that questions the credibility of claims by any organisation that "your PII is guaranteed safe with us".
Value Added Guest (Inspiring Not Aspiring)
Rate a post if you like it! - just click the star under the user's name on the left. (N.B. ratings facility no longer available in Forum Help and Suggestions; nor is it available in the Lounge)

Pasha_Selim wrote:
Thank you DS. I am concerned about this alleged leaking of PII, and am considering my options. I'd like to get a few facts first, one of which is whether or not the whole BT Friends and Family list and addresses was compromised. The ball is in BT's court over that one, and I think they should have given a straight answer by now.
I intend to ask the Guardian if they stand by the veracity of that report, and the identity of the former NoW employee who made that claim, although they are bound to protect that source I suppose.
That's a good FoI suggestion. Thanks for the link.
No problem at all and I'm glad to of helped you
I too am slightly concerned for 2 reasons. One was that BT set up F 'n' F on my account without my knowledge (IIRC it's a chargeable service so I had this removed earlier this year). I don't know how long this was set up on my account and I can't remember if I allocated any phone numbers. The other thing is that my in laws still (AFAIK) have F 'n' F set up on their BT phone account and therefore depending on what info was obtained, then my EX-DIRECTORY details may be out there.
As you are the OP of this thread and you still have not received a straight answer, maybe an email to the BT CEO (sorry forum rules prevent me from posting his email address) could be beneficial.
-+-No longer a forum member-+-

How to split presentation level and business level using two ATG instances

Hello All!
We are investigating possibility of splitting ATG presentation (web store with jsp pages and other presentation components) and business (ATG components such as Pricing, Catalog, etc.) levels. The first idea that we have is simply start two instances of ATG. One instance will serve client requests (presentation level) and communicates with another ATG instance (business level) where all ATG components are situated.
The main problem is a Nucleus container which is used for accessing all ATG components. And we don't know right solution how to point to a Nucleus container that is situated on a remote ATG instance. Right now we have two ideas how to establish communication between two ATG instances:
- try to replace local Nucleus container by remote one using RMI;
- do not replace Nucleus container by implementing some custom filter that can redirect all servlet requests to another ATG instance. In that case we will have two Nucleus containers.
What do you think about all this? Do you have any other solutions how to solve the task? Maybe we lost something? Can we deploy a cluster of ATG instances that will communicate between each other?
Thanks in advance.
Andrey.
Edited by: 945758 on Jul 11, 2012 7:00 AM

Yes ATG system can have multiple nodes grouped in one or more clusters managed by load balencer
If the services you are talking about are inherently ATG services like login, add to cart, checkout then its better to implement it with ATG.
ATG provides and support both REST and SOAP based Webservice and allows you to expose any ATG component as service thus making it available outside ATG space.
To be able to manage load better you can split your servers to page serving servers and services oriented servers and place them into multiple clusters.
Though I haven't seen anyone using this kind of topology so not sure whether it's there is any challenge in setting up this topology.

How to split one modbus serial output port into two?

Hi all,
Current Situation
My company has a instrument measuring emission in flue gas. The instrument has only one serial port for "modbus" output. The serial port is being used to sending the data collected by the instrument to our DCS.
My Question
I have a separate data acquisition computer which is also able to collect data over serial modbus. Is it possible to split the existing serial modbus output port into two so that both the DCS and my data acqusition computer can collect data from the instrument at the same time? If yes, what software and hardware do I need? One more point, high reliability is required for both data collection processes - to the DCS and to the data acquisition computer.
Thanks and regards,
Roger

What serial protocol are you using? RS-232 or RS-485?
If it is 485, then it is a multidrop bus, so you can just hook up both receivers to the transmitter via a RS-485 hub. If it uses the 232 protocol, then this would not work as only one device can receive data at any given time, so you could set one node up to repeat the signal to the second hub or use LabVIEW Shared Variables.
A Quick Comparison of RS-232, RS-422, and RS-485 Serial Communication Interfaces
Regards,
Peter Flores
Applications Engineer

Manage Apple ID - unable to update my Apple ID address and contact details

I've recently moved address and wanted to update my Apple ID physical and shipping address, as well as my contact details. When I try to edit the existing Apple ID detail the form doesn't allow me to save the changes, and when I try and go back it advises that the changes have not been saved and asks if I want to discard them.
I am using IE9 on Windows 7 - is there a known issue with this feature on the Apple website?
https://www.apple.com/support/appleid/manage/
Thanks

If you still have those apps you will still get the update notifications. Have you deleted the apps associated with that ID?

Loading File name and file contents into two separate tables using Sqlloadr

Hi All,
I have situtation like to load File contents into One table and File name into one table . File comes with .txt extension
Example :
File name : product_09_abc.txt
File contents :
Productcode
ABC
CDE
EFT
Can you please help me out this how can we acheive this using SQLLOADER.

SQL*Loader will not pass through the filename for you to be able to insert into a table.
You will need to have a controlling o/s script that picks up the file name, calls sql*loader and then also call's an SQL script (using sql*plus?) to insert the filename into a.n.other table.

Missing links to Address and Bank details

Hey Guru's
I'm missing the links to Address and Bank info in the personal information tab for some reason. Anyone have any idea what could have been changed to do so?
Thanks in advance

Hi Terry,
In Home-Pageframework Check in - Country specific services
Step-1:
Define Services
eg Employee_personfo_address     40 employee_address_in_service
   Employee_personfo_address05     40     employee_address_in_service05
Step-2:
Assign Services to Subarea and assign the position
Regards
Vijay

Replicate All Service Application into two Application Servers

Hi All,
I want to replicate all the service applications into another application server in order to configure HA.
we are having two servers having single farm.
Please Help..!!

Install SharePoint on server 2
Join Server 2 to the farm
Activate the services on server 2.
http://technet.microsoft.com/en-us/library/ee704549(v=office.14).aspx
Most service applications can be run on multiple servers (and are designed to). The exception is the User Profile Application Synchronisation Service, which can only run on one server in a farm at a time.

Splitting a family plan into two separate plans.

My ex-boyfriend and I have been sharing a family plan and would like to switch to two separate plans. I am the primary line on the account. Can we split our plans at any time or should we wait until both phones are up for the New Every 2?
Also, my line is eligible for a discounted upgrade right now. I would like to purchase my new phone online to take advantage of the online discount. Should I upgrade my phone before we go to split our lines?
Thank you,
Rachel

You can split at any time, and it will not impact the contract end date on either line. Your boyfriend may need to pay a deposit to take over the line. The process is called an Assumption of Liability, and you can do it over the phone with both parties present, or in a store.
If your phone is eligible for an upgrade now, you should do it before the switch, because when you move to an individual plan, if it is of a lower value than your current family plan, your eligibility may change.

Splitting Emergency Address and Family Details into two application

Similar Messages

Maybe you are looking for