Splitting events by date?

Is there a way to autosplit the imported images by date?

Best would be to import them as different batches in the first place. Another method is to do a Find based on date then create albums or whatever.
-Allen Wicks

Similar Messages

SPLIT PICTURES BY DATE WITHIN AN EVENT

I have over 5,000 pictures from various people, none of whom had the correct date on their cameras. I have to separate them into the places we visited. Before I do that, however, I wanted to be able to create separate events by date to later merge according to location. I've looked all over but can't find the solution. I highlighted all the pictures and couldn't "split" into events by date. How can I best do this? Any assistance would be MUCH appreciated. I think I was able to do this easily in the older version (but I may be wrong!).

In the iPhoto Preferences select the preferred split (iPhoto -> Preferences -> General)
Then in Events view, select the Event you want to split
Then Events Menu -> Autosplit Selected Event
Regards
TD

Split an event into mini-events by date?

I recently went on a trip to Mexico with a large group, and afterwards I received a DVD with all of the pictures from the trip. Unfortunately the pictures were not split up by date. I would like to do this by the day the pictures were taken. Is there any way iPhoto can split all of the pictures into separate events by the imbedded data in the pictures?

Select the event and go to the event menu ==> autosplit event
or open the event and scan up from the bottom until you find a spot where you want to split - select the photo that you want to end the new event and click on the split button - continue up and splitting until you have it like you want
in the future you can use the iPhoto preferences to do this on import (check the "split items imported from the finder into events" option
LN

SAX parser splits up character data; I expected Ign. whitesp

Im am working on a XML parser for loading data from some back
end systems into an Oracle 8i database. I am using the SAX
parser for this purpose. After doing some tests with larger
amounts of XML data (> 1M), I found some unexpected behaviour.
The parser sometimes splits up character data into two chunks of
data. The XML looks as follows:
<TAGNAME> this is the character data </TAGNAME>
The parser raises the following events:
1 startElement name = "TAGNAME"
2 characters chbuf = " "
3 characters chbuf = "this is the character data "
4 endElement name = "TAGNAME"
I expected an ignorableWhitespace event at step 2. The XML
document contains repetitive tagnames. The strange thing about
the parse process is that the parser splits up the character
data only sometimes, and I can't determine any kind of logica
for this behaviour. Most occurrences of exactly the same tagname
and character data are parsed correctly (that is, as I
expected).
Am I dealing with correct behaviour here, or is it a bug??
Rolf.
null

Oracle XML Team wrote:
: Rolf van Deursen (guest) wrote:
: : Im am working on a XML parser for loading data from some
back
: : end systems into an Oracle 8i database. I am using the SAX
: : parser for this purpose. After doing some tests with larger
: : amounts of XML data (> 1M), I found some unexpected
behaviour.
: : The parser sometimes splits up character data into two
chunks
: of
: : data. The XML looks as follows:
: : <TAGNAME> this is the character data </TAGNAME>
: : The parser raises the following events:
: : 1 startElement name = "TAGNAME"
: : 2 characters chbuf = " "
: : 3 characters chbuf = "this is the character data "
: : 4 endElement name = "TAGNAME"
: : I expected an ignorableWhitespace event at step 2. The XML
: : document contains repetitive tagnames. The strange thing
about
: : the parse process is that the parser splits up the character
: : data only sometimes, and I can't determine any kind of
logica
: : for this behaviour. Most occurrences of exactly the same
: tagname
: : and character data are parsed correctly (that is, as I
: : expected).
: : Am I dealing with correct behaviour here, or is it a bug??
: : Rolf.
: The behavior is expected and correct. Could you elaborate on
why
: you would expect the parser to treat the whitespace signalled
in
: step 2 as ignorable?
: Oracle XML Team
: http://technet.oracle.com
: Oracle Technology Network
Thank you for your quick response.
In my test XML, there are about 27500 tags containing character
data. All character data starts with a whitespace character.
After parsing the xml, the whitespace of only 5 (!) tags is
treated as a seperate character event (so two character events
are raised in succession). The remaining tags all raise only ONE
character event for the entire character data. I can't explain
the difference in treatment.
null

IPhoto '11 v. 9.2.3 bug when splitting events containing flagged and duplicate versions of same photo in Event.

UPDATE:
Okay, I don't know how to delete this - so I'm just saying that after sending this, I found Terrance's reply to a similar post (3/3/12). I didn't realize iPhoto had been changed so that the "master" controls duplicates. I do understand how to export, et cetera .... and I do use albums also! I just really want the duplicate photos to NOT be in the general Events. Trust me, I have a good reason!
Thank you for your (previous) help!
~h
Okay, when I created this User Name, I didn't foresee this situation. I'm pretty sure this is a real bug - and maybe someone can let the appropriate programmer know....
Essentially, I'm organizing my 2012 iPhoto library and am trying to get around the rule that a photo can only be in one Event. I flagged the photos I want to keep where they are - AND - be grouped separately.
Then in Flagged, I duplicated all. Then I unflag the orginal files.
Then I modified the duplicated (version 2 or version 3) files.
So, in the original events, there are the two versions of some photos.
Opening one of the events, I select a couple of photos and "split".
Split event does get created, but it has no photos.
Photos and duplicated photos remain in original event.
I'm quitting now - before I lose everything.....!
(I'll back up the library and try again later.........!)
and jsut for the fn of it, I'm adding that I find it strange that I'd have to manually click "abc-check" -- that spellcheck doesn't run automatically. --I guess it annoys others?
holly

First Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that doesn't help apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

See events by date

Would like to display recent 450 image shoot in events by date, but don't know how to do that. Now that I've updated Iphoto, can't even find the date/time of the individual pictures. Have camera (Canon G11) set to sort by date, but not to display date on actual images.

What I really meant and want is to have them grouped in events by date.
I have no idea what you want - there is not (and never has been) a way to group events - when you import from your camera the event structure is determined by your settings in the iPhoto preferences - unless you have unchecked the preference to split photos imported from the finder into events imports from disk will be treated the same
The camera was set to make "folders" by date, and I had hoped/expected them to group in separate events by date.
iPhoto does not do anything with those folders - if you were to manually drag the folders to iPhoto (and have the option to split items imported via the finder off) then iPhoto will make a event of each folder
b) I had stumbled on the info once before and forgotten it, often is out of site in window and must remember to look; kept trying to get it by clicking on the indicator on the image, as in previous Iphoto iteration. "Change"=improvement?
remembering that this strictlhy a user to user forum- is there a question there?
LN

Split event before selected clip grayed out

When editing movies, the option "split event before selected clip" is always grayed out...can anyone help???

The reason to split an event is to make the footage easier to find when you start making projects. For example, if you shot a birthday party on the afternoon and a football game at night, they might import into the same Event (based on date). You could select the first clip of football and right-click/Split Event Before Selected Clip. Now you have two Events...a birthday party event and a football event.
This has nothing to do with sharing and projects.
A single project can use clips from many events.
And you can make many projects from the clips in a single event.
The project does not duplicate the footage that is stored in the Event, it just references it.
A project is really a text file that is a recipe for building a movie. The recipe is executed when you "Share" or render your movie.
For example the Project file might say
"Look in Event XYZ and grab frames 1 through 200 from the third clip.
Add an audio track from iTunes, and mute the audio track from the Event.
Add a title that says this or that.
Apply some color correction in these parameters.
Now look at Event QPR and grab the second and third clips, but trim off the last 10 frames."
Etc.
Hope this helps.
If you want to share multiple movies from an Event, you just create multiple projects that reference the event. Choose the frames you need by dragging and dropping. And then share the projects.
No need to get QuickTime Pro involved.

Split Events Into Clips

I'm importing DV video into iMovie that is recovered from a reformatted drive, and all of the original camera info like dates and such are gone. The video is intact with sound; however, iMovie cannot tell when the camera goes on and off, and each file is imported into one big clip. Some parts of the video should be separated into separate events, as they are not related, and I cannot find a way to split the event.
Any suggestions? The files are .dv, and I don't really want to resort to Quicktime to separate the video to organize it.

I had the same "one big clip" issue when importing old 8mm/Hi8 via a Sony camcorder last weekend. I couldn't split events because there was only "one" clip to work with. Our local Apple store showed me another way that should work for you, too:
1. Locate where two scenes change using the little red vertical line.
2. Click in that area and shrink the yellow editing frame down to its minimum size (I was able to get it down to 0.1 seconds or about three frames worth).
3. Delete that short piece and the clip should be split there.
After I went through my imports doing that, it was easy to use the "Split events" function to rearrange everything.
Hope this is useful...
KWO

Can you turn off optimization while splitting events?

I want to move all my many thousands of iPhoto clips down to intermix with my other clips stored on an external drive. All seemed well, I drug them down like the apple tech told me to, but they appeared in a single event, which is bad enough, and the sound is missing, which also *****, but I've found that if I split the EVENTS back into their original date periods the sound comes back. (And I have to do that anyway so they will sort/intermix properly in the event area anyway which was my original goal.)
The PROBLEM is that every time I choose "split event before clip", it takes a minute or so for imovie to OPTIMIZE MOVIES after splitting the event. Since I'm really not planning on doing anything other than splitting these **** events for the next month or so, is there any way to turn that feature off for a while?
For that matter is there any way to speed this process up? Any way at all? All the movies are still in iPhoto, if there was a better way to do it I would. I would just export them and import them directly, but then I lose all the original dates (Though I'm starting to wonder if that would be faster.) I would be willing to buy external software if that would help.
And yes, I realize I could just drag them all down event by event, but that would take longer, because I believe I have to first create an event to drag them into. If that is incorrect let me know. But at least on my computer, creating the event takes just as long as splitting the event, so this method saves me half the time.
It seems like there has got to be a better way to do this.
Or is there any way to split at multiple points?

Flip the mute switch.

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Training and Event Management Data Load

Hello Team
Would appreciate if any of you can advice on how to load Training and Event management data. I think its stored in HRP tables.
I'm working on an upgrade assignment.
Thanks

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

Getting Training and Event Management Data using IT0031

Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

I have 20,00 images in my iphoto they have all been merged into one event. How do I restore them to the original events and dates? them

I have 20,00 images in my iphoto they have all been merged into one event. How do I restore them to the original events and dates?

Load the backup from before this happened
LN

HT201401 I can't add a contact or edit contacts the little + sign is no longer on my phone...same thing on my iCalendar. I can no longer add events or dates. how do I fix this?

I can't add a contact or edit contacts the little + sign is no longer on my phone...same thing on my iCalendar. I can no longer add events or dates. how do I fix this?

Reset your phone, hold the home and off button down until the apple symbol comes up. If that doesnt fix it then you need to restore your phone in itunes, Connect to itunes, right click on your phones name to the left, then click restore from backup. That providing you have backed up your phone recently.

Splitting events by date?

Similar Messages

Maybe you are looking for