Splitting Fields Values from A to B, C, D

I am new to portal forms and need some help on managing fields
values. The requirement is I want the value of a field to split
up into three different fields. for example : Field A has
value 'THIS IS FOR TESTING' and B, C, D fields should
have 'IS','FOR','TESTING' respectively.. This should happen as
soon as i leave the field 'A'.
I would be very thankful if anyone can help me with this.
Thanks!!

Maps have a smart feature that recall your ending location.
If you had one map with start and end location, i.e. San Francisco to Paris, adding a second map, will already display Paris as a start location.
This is true with both Globe and Flat maps.
However, to adjust zoom level with Flat Maps, you can click the Crop tool bar and access the Ken Burns effect, adjusting the zoom on the Preview Window.

Similar Messages

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How to pass field value from popup window to oninput processing of other pg

Hi,
I want to pass a field value from the popup window to oninput processing of main page ( from where popup window is triggered). and need to close the popup window. How to do it ?
In the popup window's oninputprocessing, im doing some validation checks. If it passes all the validations, then only the control shd come to main page ..else it should stay in popup window only .
Regards,
Jothi.

Hi Jothi,
you can use java script to pass the value and close your popup window. use the following code.
in your popup window:
function passData(h1)
         window.opener.document.getElementById('var1').value = h1 ;
         window.close();
then call this function when you finish your validations.
in your main page layout create an input field with id as passed in the function above "var1".
In the value attribute give it your variable as follow:
<htmlb:inputField id      = "var1"
                          value   = "<%= var2 %>"
                          visible = "false" />
"var2" will be assigned the value from your popup window.
I hope this will help you..
Regards,
Husain

Steps for replicating GR custom field values from EBP to SAP R/3

Dear SRM Gurus,
We wre using SRM 5.0 extended classic scenario..
We are having 3 custom fields for GR in SRM, we want to replicate these values to 3 other standard fields in SAP R/3..
Can you pls tell us the Procedure, Steps and standard objects that has to be changed for replicating the GR field values from SRM to SAP R/3(4.6C).
Thanks in advance,
Chandra Sekhar.

Hi
<b>Please go through the following links -></b>
Re: Confirmation screen field to be mapped to backend field
Re: Creating Confirmations in SRM - What is the preferred method
Re: GRN IDOC Transfer to ERP - MBGMCR01 ( 2 IDOCS created)
Re: Problem to send idoc for a Good Receipt created
GR IDOC Number
Re: Idoc error in Goods confirmation - urgent
Re: Delete goods confirmation in SRM3.0
Re: SRM / MM integratuion: goods receipt
IDOC MBGMCR01: CO Ctd-pedido exceeded by 1 UN:
<b>Some useful SAP OSS Notes to refer -></b>
Note 521488 - FAQ: MB_CREATE_GOODS_MOVEMENT
Note 521427 - FAQ: IDocs for goods movements
Note 521488 - FAQ: MB_CREATE_GOODS_MOVEMENT
Hope this will definitely help.
Regards
- Atul

How to get the Output File Name as One of the Field Value From Payload

Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
Bopanna

Hi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup

Transfer field value from one screen to another screen

hi gurus,
I am using field exit in mm02, i want to transfer field value from one screen to another screen. I am using Export, Import, Some FM like DYNP.......
but not getting the value.
can any one give idea about this.
Thanks in Advance,
Sudheer.

I THINK IN FIELD EXITS SOME RESTRICTION IS THERE YOU CAN NOT USE CALL TRANSACTION OR CALL SCREEN. I DONT KNOW WHAT IS YOUR ACTUAL REQUIREMENT. BUT YOU ARE TRYING TO CALL TRANSACTION USING MEMORY ID OR SOMETHING THEN I THINK IN FIELD EXIT YOU CAN NOT DO THAT. PLS CORRECT ME IF I AM WRONG
REGARDS
SHIBA DUTTA

Passing field values from View Controller to Custom Controller

Hi Experts,
I am working on a customer requirment in which customer want to see the values of field from one view in another view. The Context node & Context node attribute are the same in both the views.
I am aware that we need to pass the field values from view controller to custom controller in order to see the field in the subsequent view. I would like to kow how i can achieve that technically?
Kindly let me your valueable suggesions.
Best Regards,
Prabahar

Hi Carsten,
Thank you for the detailed feedback.
I want the fields ID_TYPE & ID_TYPE_DESCRIPTION from IUICMD/SearchAccount to be available in IUICMD/DetailAccount. I have created a context node u201CSEARCHu201D in view IUICMD/DetailAccount. I have created the context node with out choosing u201CCreate with Instanceu201D. This Context node (SEARCH) is already available in IUICMD/SearchAccount as part of the standard.
Below given is contents of the Method CREATE_SEARCH of my context class ZL_IUICMD_DETAILACCOUNT_CTXT of view IUICMD/DetailAccount, which is created by the Wizard during enhancement.
method CREATE_SEARCH.
    DATA:
      model        TYPE REF TO if_bsp_model,
      coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
      entity       TYPE REF TO cl_crm_bol_entity,    "#EC *
      entity_col   TYPE REF TO if_bol_entity_col.    "#EC *
    model = owner->create_model(
        class_name     = 'ZL_IUICMD_DETAILACCOUNT_CN00'
        model_id       = 'SEARCH' ). "#EC NOTEXT
    SEARCH ?= model.
    CLEAR model.
bind to custom controller
owner->do_context_node_binding(
           iv_controller_type = CL_BSP_WD_CONTROLLER=>CO_TYPE_CUSTOM
           iv_name = 'IUICMD/CuCoMD' "#EC NOTEXT
           iv_target_node_name = 'BUILHEADERSEARCH'
           iv_node_2_bind = SEARCH ).
endmethod.
I have enhanced the Custom Controller. Now it have new implementation class u201CZL_IUICMD_CUCOMD_IMPLu201D
Let me know where I am doing mistake
Thanks in advance
Best Regards,
Prabahar
Edited by: Prabahar Raju on Sep 2, 2009 10:47 AM
Edited by: Prabahar Raju on Sep 2, 2009 10:52 AM

Passing field value from appoinment into task

Hi,
I need to pass the field values from appointment into the task. I was able to pass values from one record type to another but in this case as both appointment and task belong to the same record type namely activity and they are having the same foreign key namely ActivityId.
So any one please tell me , is it possible to pass values from appointment in to the task or not ?
If so how?
Thanks,
Kirubahar.
Edited by: Kiruba on Mar 4, 2011 6:45 AM

Write a workflow and select the field you want to copy the value into in the Field Name and the value you want to copy in value field, you don't need to use joinfieldValue at all.
cheers
Alex

Retrieve Title field values from multiple lists and add into another list

Hi , Iam trying to retrieve Title field value from multiple lists. and add them into another list. using Javascript. Can any one help me in doing this. Below is the code.. function save() { clientContext = new SP.ClientContext.get_current(); oWebsite = clientContext.get_web(); oList = clientContext.get_web().get_lists().getByTitle('MainList'); clientContext.load(oList); clientContext.executeQueryAsync(OnSucceeded, onQueryFailed); } function GetListItemValue(listName, fieldName) { var list = oWebsite.get_lists().getByTitle(listName); var eventValue = document.getElementById(fieldName).value; eventValue = eventValue.replace(",", ""); var camlQuery = new SP.CamlQuery(); var filterdata = '<view><query><where><eq><fieldref name="Title/"><value type="Text">' + myreqValue.trim() + '</value></fieldref></eq></where></query></view>'; camlQuery.set_viewXml(filterdata); listItems = list.getItems(camlQuery); clientContext.load(list); clientContext.load(listItems, 'Include(Id)'); clientContext.executeQueryAsync(Succeeded,Failed); } function OnSucceeded() { itemCreateInfo = new SP.ListItemCreationInformation(); oListItem = oList.addItem(itemCreateInfo); oListItem.set_item('Title', 'My New Title'); var deptItemLookupField = new SP.FieldLookupValue(); //Problem in below line...I was unable to get ID var getId = GetListItemValue("Listname1", "txtboxname1"); alert("ID" + getId); if (getId != undefined) { deptItemLookupField.set_lookupId(getId); } var getId12 = GetListItemValue("Listname12", "txtboxname12"); alert("ID" + getId12); if (getId12 != undefined) { deptItemLookupField.set_lookupId(getId12); } oListItem.update(); clientContext.executeQueryAsync(itemadded, itemFailed); } function itemadded() { alert('Item added successfully'); } function itemFailed(sender, args) { alert('Item added itemFailed' + args.get_message() + '\n' + args.get_stackTrace()); }
Raj

Hi,
For this requirement, you will need to retrieve all the lists objects you want firstly, then execute the requests one by one to get the value of the Title column using CAML or
LINQ.
How to: Retrieve Lists Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185009(v=office.14).aspx
About
retrieve list items:
http://msdn.microsoft.com/en-us/library/office/hh185007(v=office.14).aspx
You can use
Promise in your script to make your requests sequentially:
http://www.shillier.com/archive/2013/03/04/using-promises-with-the-javascript-client-object-model-in-sharepoint-2013.aspx
http://www.learningsharepoint.com/2013/08/13/using-deferred-and-promise-to-handle-async-calls-in-sharepoint-client-object-model/
Best regards
Patrick Liang
TechNet Community Support

How to get POF object's field value from query result

hi,all:
I want to get field value from the query result, my code is below
Set setResults = cache.entrySet(createFilter("homeAddress.state = 'MA'"));
for (Iterator iter = setResults.iterator(); iter.hasNext(); )
Contact c=(Contact)iter.next();
System.out.println ("firstame####=" + c.getFirstName());
* but I get error*
Exception in thread "main" java.lang.ClassCastException: com.tangosol.util.ConverterCollec
tions$ConverterEntrySet$ConverterEntry cannot be cast to com.oracle.handson.Contact
at com.oracle.handson.QueryExample.printResults(QueryExample.java:159)
at com.oracle.handson.QueryExample.query(QueryExample.java:86)
at com.oracle.handson.QueryExample.main(QueryExample.java:43)
who can tell me how to get POF object's field value from query result

Hi,
If you look at the Java Doc for the entrySet method here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15725/com/tangosol/util/QueryMap.html#entrySet_com_tangosol_util_Filter_ you will see that it returns a Set of Map.Entry instances so you need to do this...
Set setResults = cache.entrySet(createFilter("homeAddress.state = 'MA'"));
for (Iterator iter = setResults.iterator(); iter.hasNext(); )
    Map.Entry entry = iter.next();
    Contact c=(Contact)entry.getValue();
    System.out.println ("firstame####=" + c.getFirstName());
}JK

To find a field value from a table

i want to get some field value from a data dictionary table.
for eg Tragr from Mara. in Fields list it shows the field is in Mara table. but in content screen it does not showing the field at all. Actually of 220 fields of mara table only 99 fields are shown. how to view all the fields of a particular field. is there any setting is there.

Hi Deva,
When we execute any table by default SAP will display only few columns.(90 i guess) If we want to view all the columns of the table then do like this after executing the table i.e in ur table output.
Menupath->Settings->User parameters->choose radiobotton
Grid display Here u can see all the fields.
If u don't want to see all the fields then do like this.
Settings->listformat->Choosefields->Deselectall->Select what
ever fields u want using the search button in bottom and press enter. It will display only selected fields.
Some times we will come up with strange situations.
EG: In the field list some field will be there. But if u select that field from that table in select query it will give u syntax error saying field xxx does't exist in table yyy. This field is nothing but text table field. If u want to select this field then u have to select it from the text table. U can find the text table exist for some table or not in
Menupath->goto->text table. (In this case makt is text table for mara)
Just check below code for ur reference.
DATA: wa_mara TYPE mara.
SELECT SINGLE * INTO wa_mara FROM MARA .
Here if u go to mara table u have field MAKTX But above select will not return the field maktx even we are refering wa_mara to data base table mara. We have to explicitly select it from MAKT.
Hope this clarified all ur doubts.
Thanks,
Vinod.

COPA - Split of Value from condition type into different value fields

Dear All,
Customer is having several free schemes to customer the same is set up by SD and Cost of free goods is attached to One Z condition type, this flows along with Main product as characteristic. So we have Main product cost in VPRS and Scheme cost in Z Condition and there is possibility of more than one scheme cost flowing in one Z condition for single billing document. Whereas customer request is to see the each scheme cost separately in COPA. Since Value from SD will be flowing through only one condition type , it will be difficult to me to Split this in COPA. We have given a thought of having more than one condition type from SD ( one Z condition for one scheme) but this resolve our issue at hand. If we look at long term whenever customer introduces new Scheme new condition type need to be created and related COPA changes etc, Which doesn't seem to be working out.
Request Experts help in this, thanks in advance for the help.

Hi Santosh
Having a Z cond type for each scheme is preferrable.... This would address the issue with Standard SAP itself...
Reason being, if you dont do that, then you will have to maintain a mapping somewhere in a Z Table where by system would come to know of the ratio between the schemes... This will be more cumbersome to develop and maintain... Still you wanna do that, here is the logic....
Maintain the schemes in a Z Table... Where each scheme will have a scheme ID - The ratio applicable to various schemes and also the relevant value fields of COPA to be updated for each scheme....
Now, add a Custom Field to the Sales Order and while creating the SO this field needs to be updated with the scheme ID(Relevant Exit to make it mandatory MV45AFZZ / ZB).... If Scheme ID is populated, your Billing should read the Split from Z Table using Exit RV60AFZZ and Update COPA using Exit COPA0002
br, Ajay M

Unable to read field value from main table - unexpected socket read error

Hi Friends,
While executing the below code, I am able to get the value of the field 'id' but i am unable to get the value for the 'materialnumber' field. i am getting the below exception
+com.sap.mdm.commands.CommandException: com.sap.mdm.internal.protocol.manual.ProtocolException: java.io.IOException: Unexpected socket read. Result is -1.
     at com.sap.mdm.data.commands.AbstractRetrieveLimitedRecordsCommand.execute(AbstractRetrieveLimitedRecordsCommand.java:158)
     at com.sap.mdm.data.commands.RetrieveLimitedRecordsCommand.execute(RetrieveLimitedRecordsCommand.java:157)
     at updaterecords.main(updaterecords.java:126)
Caused by: com.sap.mdm.internal.protocol.manual.ProtocolException: java.io.IOException: Unexpected socket read. Result is -1.
     at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:100)
     at com.sap.mdm.data.commands.AbstractRetrieveLimitedRecordsCommand.execute(AbstractRetrieveLimitedRecordsCommand.java:146)
     ... 2 more
Caused by: java.io.IOException: Unexpected socket read. Result is -1.
     at com.sap.mdm.internal.net.DataSocket.receiveData(DataSocket.java:59)
     at com.sap.mdm.internal.net.ConnectionImpl.readInt(ConnectionImpl.java:417)
     at com.sap.mdm.internal.net.ConnectionImpl.nextMessage(ConnectionImpl.java:501)
     at com.sap.mdm.internal.net.ConnectionImpl.receiveMessage(ConnectionImpl.java:472)
     at com.sap.mdm.internal.net.ConnectionImpl.send(ConnectionImpl.java:209)
     at com.sap.mdm.internal.net.ReservedConnection.send(ReservedConnection.java:105)
     at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:97)
     ... 3 more+
import com.sap.mdm.commands.AuthenticateUserSessionCommand;
import com.sap.mdm.commands.CommandException;
import com.sap.mdm.commands.CreateUserSessionCommand;
import com.sap.mdm.commands.DestroySessionCommand;
import com.sap.mdm.commands.GetRepositoryRegionListCommand;
import com.sap.mdm.data.Record;
import com.sap.mdm.data.RegionProperties;
import com.sap.mdm.data.ResultDefinition;
import com.sap.mdm.data.commands.RetrieveLimitedRecordsCommand;
import com.sap.mdm.ids.TableId;
import com.sap.mdm.net.ConnectionException;
import com.sap.mdm.net.ConnectionPool;
import com.sap.mdm.net.ConnectionPoolFactory;
import com.sap.mdm.schema.FieldProperties;
import com.sap.mdm.schema.RepositorySchema;
import com.sap.mdm.schema.commands.GetFieldListCommand;
import com.sap.mdm.schema.commands.GetRepositorySchemaCommand;
import com.sap.mdm.search.Search;
import com.sap.mdm.server.DBMSType;
import com.sap.mdm.server.RepositoryIdentifier;
public class updaterecords {
     public static void main(String[] args) {
          try {
                String serverName = "159.112.6.26";
                ConnectionPool connections = null;
                try {
                     connections = ConnectionPoolFactory.getInstance(serverName);
                } catch (ConnectionException e) {
                     e.printStackTrace();
                     return;
               // specify the repository to use
               // alternatively, a repository identifier can be obtain from the GetMountedRepositoryListCommand
               String repositoryName = "DEMO";
               String dbmsName = "MDMD";
               RepositoryIdentifier reposId = new RepositoryIdentifier(repositoryName, dbmsName, DBMSType.ORACLE);
               // get list of available regions for the repository
               GetRepositoryRegionListCommand regionListCommand = new GetRepositoryRegionListCommand(connections);
               regionListCommand.setRepositoryIdentifier(reposId);
               try {
                    regionListCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
                    return;
               RegionProperties[] regions = regionListCommand.getRegions();
               // create a user session
               CreateUserSessionCommand sessionCommand = new CreateUserSessionCommand(connections);
               sessionCommand.setRepositoryIdentifier(reposId);
               sessionCommand.setDataRegion(regions[0]); // use the first region
               try {
                    sessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
                    return;
               String sessionId = sessionCommand.getUserSession();
               // authenticate the user session
               String userName = "meter1";
               String userPassword = "meter1";
               AuthenticateUserSessionCommand authCommand = new AuthenticateUserSessionCommand(connections);
               authCommand.setSession(sessionId);
               authCommand.setUserName(userName);
               authCommand.setUserPassword(userPassword);
               try {
                    authCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
                    return;
               GetRepositorySchemaCommand cmd=new GetRepositorySchemaCommand(connections);
               cmd.setSession(sessionId);
               try{
                    cmd.execute();
               }catch(CommandException e){
                    System.out.println(e.getLocalizedMessage());
               RepositorySchema repsch=cmd.getRepositorySchema();
               // the main table, hard-coded
               TableId mainTableId = new TableId(1);
               // specify the result definition (what to retrieve); in this example, nothing
               ResultDefinition rd = new ResultDefinition(mainTableId);
               // select all records
               Search search = new com.sap.mdm.search.Search(mainTableId);
               //get fields
               GetFieldListCommand getFieldListCommand = new GetFieldListCommand(connections);
               getFieldListCommand.setSession(sessionCommand.getUserSession());
               getFieldListCommand.setTableId(mainTableId);
               try {
                    getFieldListCommand.execute();
               } catch (CommandException e) {
                    System.out.println(e);
               FieldProperties[] lookupFields = getFieldListCommand.getFields();
               // add fields to records to retrieve
               rd.addSelectField(repsch.getFieldId("Products","Id"));
               rd.addSelectField(repsch.getFieldId("Products","MaterialNumber"));
               // retrieve the records
               RetrieveLimitedRecordsCommand limitingCommand = new RetrieveLimitedRecordsCommand(connections);
               limitingCommand.setSession(sessionId);
               limitingCommand.setResultDefinition(rd);
               limitingCommand.setSearch(search);
               //limitingCommand.setPageSize(2000);
               try {
                    limitingCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
                    return;
               System.out.println("Record count is " + limitingCommand.getRecords().getCount()+"\n");
               Record[] records=limitingCommand.getRecords().getRecords();
System.out.println(records[0].getFieldValue(repsch.getFieldId("Products","Id"))+ " \n");
System.out.println(records[0].getFieldValue(repsch.getFieldId("Products","MaterialNumber"))+ " \n");
               // finally destroy the session
               DestroySessionCommand destroySessionCommand = new DestroySessionCommand(connections);
               destroySessionCommand.setSession(sessionId);
               try {
                    destroySessionCommand.execute();
               } catch (CommandException e) {
                    e.printStackTrace();
                    return;
          } catch (Exception e) {
               System.out.println(e.getLocalizedMessage());
               e.printStackTrace();
Kindly let me know where i am going wrong. MaterialNumber field is a TEXT not a lookup table field. Above fields are from the main table.
Thanks,
Raags

Hi Friends,
I got the solution. It was the error because of not having a the below statement.
limitingCommand.setPageSize(1);
As i havent used that statement, it was trying to get 1000 records, and i dont know exactly what makes this to get that error. Anyhow., As i want to use for updation, i cn live with one record.
Thanks,
Raags

Could not getting field values from form

hi,
hellow, can you help me for solving the bellow problem
i have form its enctype attribute of form tag is setted as multipart/form-data. when i am submiting this form, i call a request.getParameter(); in the submitting jsp file. But for any controls such as text,checkbox,select box etc could not get its corresponding value.

Its obvious why its not picking up the change in the second action.
Lets see...
Here is your case I
You get the populated form which is also put in the request with updated value from the JSP....
(1)
protected Forward updateGoalObjective(GoalsForm form)
form.setGoalId(44); //int field set to 44
return new Forward("success");
You set one of the fields some other value....in one but how will the second action know about it???
You try to execute the second action and the action grabs the form from the request again. This is the original form submitted by the JSP so you still see that value...
You will have to pass in the customized or processed form for the form to be able to get it...
protected Forward showGoal(GoalsForm form)
System.out.println(form.getGoalId()); //prints 68
return new Forward("success");
In your second case you create a new form...why would you want to do that if you have a form value being set in JSP??
The answer is you should be doing something Like this:
* @jpf:action form="goalsForm"
* @jpf:forward name="success" path="showGoal.do"
protected Forward updateGoalObjective(GoalsForm form)
//other code
form.setGoalId(44); //int field set to 44
return new Forward("success", form);
* @jpf:action form="goalsForm"
* @jpf:forward name="success" path="Goal.jsp"
protected Forward showGoal(GoalsForm form)
System.out.println(form.getGoalId()); //prints 68
return new Forward("success");
}

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

Splitting Fields Values from A to B, C, D

Similar Messages

Maybe you are looking for