Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

Similar Messages

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

Split XSLT Output into Multiple Files

I have an XML-to-File scenario working, but now I need to split my XSLT map output into multiple files based on the data. I have been reading the Jin Shin blog on message splitting, but don't know that it pertains to my situation.
XML data getting mapped with XSLT map creates output formatted like this.
<?xml version="1.0" encoding="utf-8"?>
<ns1:ColdInvoiceData xmlns:ns1="http://graybar.com/cold/invoice">
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>15</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>1.25</UnitPrice>
</Details>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>002</LineItemNumber>
<UnitPrice>2.22</UnitPrice>
</Details>
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>16</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>3.33</UnitPrice>
</Details>
</ns1:ColdInvoiceData>
I currently have this output writing to a file (FTP, File Conversion). A single file is no issue, but I need to send multiple files for every set of HDR/DTL(s). I also need to put the invoice number in the filename (which is working fine as a parameter in my single FTP File CC now).
Can I make this happen with message splitting and maybe a second map (GUI map)? Do I need to adjust the XSLT output XML format to have an invoice level? Is there a better way to go?
Thanks!

I made a change to the namespace used on the Messages/Message1 nodes (since the system-assigned ns0 was already being used in my xml data) and now I am getting output.
The problem is that the output matches my input. As aforementioned, I started with just a one-to-one mapping on every node and field.
When I change the mapping to try to force multiple ColdInvoiceData nodes, I get the following error (when my source has two Invoice nodes):
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:ColdInvoiceData[2]/Invoice. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at
When my source has one invoice node, it works ok.
Here is a screenshot of my mapping structure.
http://webpages.charter.net/kpwendel2/ib.jpg

Split SQR output into multiple files And Rename each file.

Greetings!
We ran into scenario where we need to split an SQR output (PDF) split into multiple files (each page , each file). More over the out put has to be renamed with EMPLID.
It is for printing Advices, where we run DDP003 to print all of them, Our requirement needs to have one PDF file for each employee to placed into a shared drive OR to be emailed.
I was thinking of running the same process in a loop individually, but this is resource intensive. Is there any way we can batch run this SQR process and split into each page (each paychek comes to one page),
AND
I need them renamed by SQR as it creates them, Each file would be names as EMPLID.
This is all in alternative to run process individually by employee , via self service. to not to over laod Process scheduler server.
Can anyone help me how can we get these thigns done in SQR?
Thanks in advance.

You can use the SQR command new-report for each employee which closes the current report output file and opens a new one with the specified file name (e.g. EMPLID).

Split single row into multiple rows containing time periods

Hi,
I have a table with rows like this:
id, intime, outtime
1, 2010-01-01 00:10, 2010-01-3 20:00
I would like to split this row into multiple rows, 1 for each 24hr period in the record.
i.e. The above should translate into:
id, starttime, endtime, period
1, 2010-01-01 00:10, 2010-01-02 00:10, 1
1, 2010-01-02 00:10, 2010-01-03 00:10, 2
1, 2010-01-03 00:10, 2010-01-03 20:00, 3
The first starttime should be the intime and the last endtime should be the outtime.
Is there a way to do this without hard-coding the 24hr periods?
Thanks,
Dan Scott
http://danieljamesscott.org

Thanks for all the feedback, Dan.
It appears that the respective solutions provided will give you: a) different resultsets and b) different performance.
Regarding your 'truly desired resultset' you haven't answered all questions from my previous post (there are differences in the provided examples), but anyway:
I found that using CEIL or ROUND makes quite a difference, using my 'simple 3 record testset' (30 records vs. 66 records got initially returned, that's less than half of the original). That's quite a difference. However, I must call it a day (since it's almost midnight) for now, so there's room for more optimizement and I haven't thoroughly tested.
But this might hopefully make a difference performancewise when compared to my previous 'dreaded example':
SQL> drop table t;
Table dropped.
SQL> create table t as
2 select 1 id, to_date('2010-01-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-01-03 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
3 select 2 id, to_date('2010-02-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-02-05 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
4 select 3 id, to_date('2010-03-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-03-03 00:10', 'yyyy-mm-dd hh24:mi') outtime from dual;
Table created.
SQL> select id
2 ,      max(intime)+level-1 starttime
3 ,      case
4           when level = to_char(max(t.outtime), 'dd')
5           then max(t.outtime)
6           else max(t.intime)+level
7         end outtime
8 ,      level period
9 from   t
10 connect by level <= round(outtime-intime)
11 group by id, level
12 order by 1,2;
        ID STARTTIME           OUTTIME                 PERIOD
         1 01-01-2010 00:10:00 02-01-2010 00:10:00          1
         1 02-01-2010 00:10:00 03-01-2010 00:10:00          2
         1 03-01-2010 00:10:00 03-01-2010 20:00:00          3
         2 01-02-2010 00:10:00 02-02-2010 00:10:00          1
         2 02-02-2010 00:10:00 03-02-2010 00:10:00          2
         2 03-02-2010 00:10:00 04-02-2010 00:10:00          3
         2 04-02-2010 00:10:00 05-02-2010 00:10:00          4
         2 05-02-2010 00:10:00 05-02-2010 20:00:00          5
         3 01-03-2010 00:10:00 02-03-2010 00:10:00          1
         3 02-03-2010 00:10:00 03-03-2010 00:10:00          2
10 rows selected.
SQL> By the way: I'm assuming you're on 10g, is that correct?
Can you give us some information regarding the indexes present on your table?

Splitting a single video into multiple sub-videos

I have CS4 Master Suite on MAC.
I want to take a single video and split it into consecutive chunks and store each chunk as a separate video file (Eventually to put in a database to allow web uses to select which chunk(s) they want to view.
I can do this "by hand" in Premiere but I want to eventually do this in a semi-automated way. (Visually decided where to place the splits, but automate the splitting, naming conventions etc.
Suggestions?
Is there a scripting language interface that could help me do some of this?
Thanks

I did not make clear, that of course I don't one to do this with ONE video, but with hundreds of hours of video in typically 20-30 second chunks. So perhaps there are good alternate suggestions to do what I want to do?
I want eventually to give the enduser the possibility to run a database query to select one or more of the final chunks/chapters for viewing

How to Split Single Idoc into 2 files and put some delay

Hi,
I have a IDoc to file Scenario. Invoice Idoc to Flat file scenario
this is a reuse Interface
Current Scenario we have graphical mapping(used for lookup and dynamic filename, mostly all the field mappings are 1-1) and ABAP Mapping to convert Idoc to flat file, 1 Idoc will generate 1 file.
In addition to the above case, there is 1 more requirement
Correction Invoice case. where in I get single Idoc with Multiple Item categories (Original data and Correction data)
In this case always I need to send two files(2 Idoc data), first Idoc is for Original Idoc and 2nd is Corrected Invoice, these 2 idocs should be sent with some delay.
In Correction Invoice case, I should generate 2 idocs based on Item category (PSTVY) value.
Suppose I have 4 E1EDP01 segments out of which PSTVY has value "AA" and "BB" repeated twice as shown below
<PSTYV>AA</PSTYV>
<PSTYV>AA</PSTYV>
<PSTYV>BB</PSTYV>
<PSTYV>BB</PSTYV>
So I need to generate 2 Idoc 1 for AA and other for BB.
If there is no correction Invoice, 1 idoc for 1 file will be generated.
Am planning to use BPM to delay the idocs and identigy bpm based on Document type else no bpm...
How do I split the mapping of single Idoc to 2 files based on Item category.
Thanks,
Varun

You can use the multi-mapping to split the message payloads according to business requirement (AA and BB segments values)
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
And then send to different receivers by adding the conditions on the Receiver Determination (for example, "field = AA" go to Receiver1, and "field = BB" to to Receiver2).
http://help.sap.com/saphelp_nwpi71/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/frameset.htm
Or even Extended (enhanced) receiver determination, should the scenario be more complex:
http://wiki.sdn.sap.com/wiki/display/XI/EnhancedReceiverDeterminationinSAP+XI

I am trying to split a document into multiple files and it won't let me

I have opened my file in Adoble Acrobat Pro, for which I have a year subscription, and the option to split the document is gray (not applicable). Why would this not be an option? This file contains multiple docs that were merged into one for ease while emailing. Now I need to split them back up. Shouldn't I be able to do this with Acrobat Pro?

Hi adminkg&a,
It sounds like the file may have security applied to prevent alteration. Do you see "Secured" in the document's title bar?
Best,
Sara

Split single transaction into multiple PDFs

I have a single XML file that contains a form that overflows multiple times. I want each form to be treated as a separate transaction (i.e. I want each form to generate a separate pdf).
From the FSISYS:
< ExtractKeyField >
SearchMask = 1,<Wrapper
I want each of these Address Changes to result in a separate PDF.
<Wrapper>
<ProducerConfirmations beginTime="0001-01-01T00:00:00" endTime="0001-01-01T00:00:00" emailChange="true" nyFlag="NA">
<AddressChange previousAddressId="ResidentAddr_Old" addressId="ResidentAddr" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="Residential" />
<AddressChange previousAddressId="BusAddr1_Old" addressId="BusAddr1" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress1" />
<AddressChange previousAddressId="BusAddr2_Old" addressId="BusAddr2" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress2" />
<AddressChange previousAddressId="BusAddr3_Old" addressId="BusAddr3" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress3" />
<AddressChange previousAddressId="BusAddr4_Old" addressId="BusAddr4" mode="email" responsys="e0740ace1f534391b464b03707874636" addressType="BusinessAddress4" />
</ProducerConfirmations>
</Wraper>
Any way I can force the PDF print driver to produce each page as a separate file?
Muchas gracias,
Dave

You'd need to use class recipients and make this node the address field. There is not an other way to split at the transaction level.

Audio sync problem as soon as iMovie splits single DV into multiple MOV

The original DV has perfect audio sync. When I split a clip (e.g. delete some frames), iMovie splits the files and changes to .MOV. The audio is now out of sync.
Anyone else see this? Any work arounds?
Thanks -- Sophie

Hi
Error -41 mFulErr Memory full (open) or file won't fit (load)
So if You've really got 40Gb free space on Start-Up (Mac OS) hard disk - Others DO NOT count as neither iDVD or Mac OS can use space there for it's temp files.
Then I would close down Mac even disconnect Mains - Then re-start it and see if it got's it's memory right.
Else
• Audio from iTunes - use to give me problems - so I do - in iTunes
• collect the needed audio into a new PlayList
• Burn this out as an Audio-CD (.aiff) - NOT .mp3
• Use thge files on this CD in movie projects
Works for me.
Yours Bengt W

Split single column into multiple column using sql /plsql

create table test (name varchar2(255);
insert into test values('DH RED 20 12/10 10 2 ');
insert into test values('PM STUD 20 15/10 20 29.55' );
insert into test values('LS MENTHOl FILTER ASC 18/70 60 240.66');
insert into test values('WINSTON WHITE CLASSIC 13    18/70 60 240.66');
My Output should be like as below in other table :
create table test_result (brand varchar2(255),packet   varchar2(50),amount varchar2(25),total varchar2(25));
BRAND                                   PACKET       AMOUNT           TOTAL
DH RED 20                            12/10            10              2
PM STUD 20                           15/10            20              29.55
LS MENTHOl FILTER ASC               18/70            60              240.66
WINSTON WHITE CLASSIC 13             18/70            60              240.66can you please help me to solve this issue
thanks in advance
Edited by: A on Apr 21, 2012 11:33 PM
Edited by: A on Apr 21, 2012 11:34 PM
Edited by: A on Apr 21, 2012 11:34 PM

h4. # Database should be 10g. If version is below 10g query need to be modified as per string format.
h4. # Split string into two parts by '/'. First part contain brand + packet(1), Second part contain packet(2) + amount + total
h4. # Your brand name can be of any length.
String Format* : <Brand Name><space><packet(1)>/<packet(2)><space><amount><space><total>
SELECT name,
       REGEXP_SUBSTR(first_part,'.+[[:space:]]',1,1) brand,
       REGEXP_SUBSTR(first_part,'[^[:space:]]+/',1,1) || REGEXP_SUBSTR(second_part,'[^[:space:]]+[[:space:]]',1,1) packet,
       REGEXP_SUBSTR(second_part,'[^[:space:]]+[[:space:]]',1,2) amount,
       REGEXP_SUBSTR(second_part,'[^[:space:]]+$',1) total
FROM
(SELECT trim(name) name,
          trim(substr(name,1, instr(name,'/'))) first_part,
          trim(substr(name,instr(name,'/')+1)) second_part
   FROM test )
{code}

Splitting single idoc into multiple xml's

Hello,
My requirement is such that, i need to split an custom IDoc into three xml which will be picked up by MDM, as i am new to PI 7.1 kindly guide me through the process.
and the second requirement is, i need to map the same custom IDoc into three different MDM repositories pls guide me through the process

Hi Abhishek,
[quote]My requirement is such that, i need to split an custom IDoc into three xml which will be picked up by MDM, as i am new to PI 7.1 kindly guide me through the process
For this, you have to go for multimapping.
The links for it are already provided in the above posts.
and the second requirement is, i need to map the same custom IDoc into three different MDM repositories pls guide me through the process
Can you please explain this requirement further?
-Supriya.

Problem splitting XML Data into multiple files

I am sending an XML message through an enterprise message source in enterprise link design studio. While I do so, I am getting a heavy error. This error tells me that my path ist wrong, but I am sure this one is right. Actually everything worked fine till I added an attribute twice in my XML. Since this point enterprise link drives me crazy, I have checked on my XML, it is valid, I have checked on my path, which is also ok.
Anyone some suggestions how to resolve the issue?
The Error code looks the following:
Unable to resolve path "/msg" in message field "host" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Unable to resolve path "/msg" in message field "host" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "NotificationPLAN" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
Regards,
Christoph

Ok what I tried:
- I restarted the BAM Server
- I restarted the Design Studio
- I restarted the oc4j through which I publish the messages through a topic
Result:
Unable to resolve path "/msg" in message field "Data" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Unable to resolve path "/msg" in message field "Data" XML.
XML:
<msg host="192.168.52.129:18342" app="[ZInvestigationProvider#null]" cat="PROCESS" id="org.sopware.services.exampleuri.impl.CepMessage.21" lvl="INFO" text="Investigation_POSSIBILITY BPEL_ID=330024 - ID=1002, RFID=RFID002, NAME=SSN Emmersberger, StartDate=10 CurrentDate=17, expectedShippingDate=13, currentZone=-1, deliveryTimeAgreement=true" tsp="2007-12-05T22:25:36.093Z" xmlns="http://schemas.sbb.org/management/Notification/1.0" />
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x68]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "NotificationPLAN" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]

Split TempDB Data file into multiple files

Hey ,
I have been seeing TempDB contention in memory on our SQL server 2012 Enterprise Edition with SP2 and I need to split TempDB Data file into multiple files .
Could someone please help me to verify the following information:
1]
We are on SQL server 2012 Enterprise Edition with service pack2 but as per SQL Server 2012 Enterprise Edition under CAL Licensing –We are limited to use 20 logical processors instead 40 logical processors. Our SQL is configured
on NUMA nodes and with the limitation SQL uses only 2 NUMA nodes on live .There are 10 logical CPUs are evenly assigned to each NUMA nodes. Microsoft recommends that if SQL server configured on NUMA node and we have 2 NUMA nodes, then we may add two data files
at a time. Please let me know should I add two TempDB data file at a time?
2] We have TempDB Data and log files both on the same Drive of SQL server .When I split TempDB into two Data files, I can get them on the same Drive .What your recommendation should I need to create TempDB Data files on the same drive or on separate
disks?
3] What would be the blackout plan for splitting the tempdb into multiple files? Please let me know if someone has a better back out plan ?
1] Run script that create tempdb Database with a single file
2] Reboot SQL service in order to apply change
Your help will be apprecited .
Thanks ,
Daizy

Tom , I am seeing TempDB contention on Production server when there is a heavily load on sql server . We also experiencing the overall system slowness.Please look at Pagelatch wait statistics on our server ,Please advise .
wait_type
waiting_tasks_count
wait_time_ms
max_wait_time_ms
signal_wait_time_ms
PAGELATCH_UP
2680948
3609142
10500
508214
PAGELATCH_SH
1142213
1338451
8609
324538
PAGELATCH_NL
0
0
0
0
PAGELATCH_KP
0
0
0
0
PAGELATCH_EX
44852435
7798192
9886
6108374
PAGELATCH_DT
0
0
0
0
Thanks ,
Daizy

How can I split a class into 2 files?

I converted a C++ program to Java recently and it works fine, but I ran into a problem.
One file is very large and I need to add more functionality. Unlike with C++ where you can just put new functions in another file, I don't see a way to do it in Java.
I made another file, and therefore another class, but the compiler complains that it can't call a static function from non-static context. (I did not declare it static so I guess it's assuming it) But I understand why. So I made the new class "extend" the old one so "this" would exist but that doesn't work -- Is it because the new class is a subclass of the original class?
There must be a way to do this. But I don't see what is likely obvious. HELP! And thanks.

JavaIsBetterThanCPP wrote:
There must be a way to do this. But I don't see what is likely obvious. HELP! And thanks.Unfortunately Java has no concept of "partial classes" like C# has. Generally, however, a class that is large enough to split up into separate files is either one class that should be modularized further into separate classes, or it already is modularized and all that code is the result of many inner classes. What some people do is promote those inner classes to top-level members in their own file, and mark them as package-private. Using a package you can basically have two classes that know everything about each other and have full access to each other.
But personally, and until I see justification otherwise, semantics in Java being unbreakingly tied to a certain file structure and naming is the most bonehead and, frankly, non-Java thing about Java.
There's probably a pre-processor out there that will let you split a class into multiple files and will combine them into a single source file just-in-time to pass to the compiler.

Splitting single video into multiple files - workflow improvements?

Similar Messages

Maybe you are looking for