SPM 2.1 datasource background activity when running report for first time
Hi All,
When I log into SPM and click New -> Report, the cursor changes to the timer icon before i drag in a dimension or run a report.
In SM66 there is an SQL read statement that appears to coincide with this front end behaviour.
Often this process times out in the front end with a timeout error and "time dimension value help failed".
Then if i go to create a new report again, a new tab opens, and it opens instantly and there is no SQL read statement.
Why is an SQL read statement occurring at this point before any data is selected?
Why does it take so long?
Many thanks for any help
Kind regards,
Neil
Hello,
We initialize the time dimension when the reporting console is opened for the first time. Sometimes depending on the load on your server , this could take a long time thus timing out. I would suggest you to look at the load on your java server. Also , check if there are any background processes running on the ABAP side. Also take a look at the timeout limit in Application Properties and see if you can increase this limit.This might help initially.
As mentioned , the time dimension is only initialized when the reporting console is opened for the fist time in a given session. This explains why you don't see such a behavior subsequently.
Hope this helps!
Thanks,
Madhav
Similar Messages
-
Error msg when running Forte the first time
The first time I ran Forte after installing it, I got an error message. Does anyone know what this means? I got this message on Win 98 and 2000. Here is the error message:
"Some of the set of previously installed modules did not satisfy their dependencies
and will be treated as disabled.
For Tools Debugger ("org.netbeans.modules.debugger.debug/1") failed:
This module depends on Java package sun.tools.debug which is not loaded
(or registered according to theVersioning Specification)."The same error message appeared when I installed Forte on a Linux platform. I wondered if it might have something to do with the fact that I set JDK_HOME to the location of J2SE and not J2EE, which I thought perhaps might have org.netbeans stuff in it, maybe also the remote debugging stuff in sun.tools.debug. But I'm not sure if I should set JDK_HOME of J2EE and reinstall Forte to find out.
-
Set up software does not start when connecting ipod for first time
Hi,
Just bought an ipod classic and appart from charging nothing happens when connecting it for the first time, I don't even see it in my finder window.
Help please.
Thanks.
Mike.If your signature is correct in stating your computer is running 10.4.5, you need to run Software Update to get your system up to 10.4.10 or later.
CG -
Error when run the eclipse first time
show this message:
未正确配置 ABAP 通信层。 这可能是缺少 Microsoft Runtime DLLs VS2010 所造成的。 请查询安装指南或下载页面以了解有关如何安装此组件的更多详细信息。
Native library sapjco3 is too old. Found library C:\Windows\System32\sapjco3.dll has version "720.612", but required is at least version "721.215".
but, i can get the newest version of sapjco is "720.612", where is to find the version "721.215". sap not udpate?ABAP in Eclipse contains the appropriate sapjco3 version, but it is not found because the older version in C:\Windows\System32 has higher precedence. Probably you have a previous JCo standalone installation?
SAP does NOT recommend to install sapjco3.dll in C:\Windows\System32.
You should remove it and start Eclipse with the -clean option.
Best regards,
Marco -
Error when starting UI for first time (Identity Management 7.1)
Hello. I've installed Identity Management 7.1 on top of a fresh Netweaver 7.0 (patch 17)
Now,I want the UI up and going. I've used the SAP-NW_IdM_IC_Install_IdMUI_7-1.pdf document as reference for setup. I can't find anything missing but still i get an errormessage when trying the http:// (Welcome)
! Java.lang.NullPointerException
Tjenesten er nede (Service is Down)
Kan ikke hente MSKEY for sperret bruker (Cannot get MSKEY for locked user)
What's wrong?
Appreciate some help
Regards Günther SchnellI too encountered this error. After taking a look at the default trace file I observed the following error:
Error#1#/System/Database/sql/jdbc/direct#Java#com.sap.sql_0003##SQL error occurred on connection CLKLABVM3
IDM:mxmc_db:dbo: code=207, state="S0001", message="Invalid column name 'recoverpwdfailtask'."; SQL statement is "select is_id,resultsize, workflowrepository,enablepwdprovisioning,PwdUseDictionary,ChkPwdHistory,wfWelcomeFieldHeader,wFwelcomeFieldFooter, recoverpwdtask, recoverpwdfailtask,authqminvalues,authqalternateattr,authqalternateboth,authqalgorithm,authqpar1,authqpar2,authqpar3,authqgetpwdmethod,authqaddpwdtoume, maxloginattempts,authqStep1,authqStep2,authqStep3,authqStep4 from mxi_idstores where is_id=?".
In order to resolve this, I had to apply the latest update (ICDESIGNTIME01_0-10007480) for the IDM design time. The update will add the missing column tot he table structure.
As per the instructions, ensure that you make a backup of your database before applying the patch. -
When itunes load for first time ,the ios operating system load automatically?
I connect my ipod for first time ,and download itunes, but an operating system doesnt show in settings /general/ doesnt appears software??
can somebody tell me what to do ? or if my ipod may be is not working properly? and any time I try to download an apps , read need ios5.What then does show?
Did you setup/activate the iPod? You have to do that via wifi (for newer ones) or conneft to iTunes and restore
iTunes: Restoring iOS software -
Mesage "A client copy run is currently active" when running SCC1
Hello
I get a mesage "A client copy run is currently active" when running SCC1. So I can not transport tr. req from source client.
Last client copy was 2 years ago
Please for helpCheck SCC3 for CC traces, you'll see what is going wrong there.
regards
Juan -
My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now
Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Smart forms print control pop box (no required) when run report
Dear All Expert Guru,
how to control printing pop box when execute transaction code ,Report are make in smart form format
because while run our report then come printing pop box select out put device the will come report
. but our user required no should be come printing pop box they are required when run report direct come report
Pls help me any one.
Thanks & Regars.
Sudhir SrivsatavaHi,
Pass the parameter no_dialog = 'X' while calling the smartform.
data: wa_ctrlop type ssfctrlop.
wa_ctrlop-no_dialog = 'X'.
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX = ARCHIVE_INDEX
* ARCHIVE_INDEX_TAB = ARCHIVE_INDEX_TAB
* ARCHIVE_PARAMETERS = ARCHIVE_PARAMETERS
CONTROL_PARAMETERS = wa_ctrlop
* MAIL_APPL_OBJ = MAIL_APPL_OBJ
* MAIL_RECIPIENT = MAIL_RECIPIENT
* MAIL_SENDER = MAIL_SENDER
* OUTPUT_OPTIONS = OUTPUT_OPTIONS
* USER_SETTINGS = 'X'
* IMPORTING
* DOCUMENT_OUTPUT_INFO = DOCUMENT_OUTPUT_INFO
* JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
* JOB_OUTPUT_OPTIONS = JOB_OUTPUT_OPTIONS
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
Regards,
Srini. -
No results when running KOB1 for Service Orders
Hi gurus,
We have a process with Service Orders where actual costs are posted.
When running report KOB1 for service orders with actual posts, no result is showing.
Any idea why this is happening?
Thanks,
VLHi Victor
Try to check this options:
1-be sure the posting date range is corrected.
2-be sure the layout choosen is not set some filter. Try to disable all filters.
If you checked this points and even after is not working.
Try to run FBL3N for the account posted, open financial document and check if a Controlling document was generated.
Check if the account is a cost element in KA03.
Regards -
Maxmize window when run Report builder 10gR2
Thanks in advance to all,
I have read of a post in which he treated maxmize window when run Report builder 10gR2, but I don't succeed in finding it. Can someone point out me the link?
PS. I have already post on Form ForumThanks for your reply.
But i was speaking maxmize window of report builder application on WIN xp, because when i
exe rwbuilder i always,have to maxmize window.
I know that it is a fool problem, but if to someone it happens and he had resolved...
Howevar thanks for your time -
Kernel Panic when run virtual machine same time on VirtualBox and Parallels Desktop
Hi,
Like as the title of thread: "Kernel Panic when run virtual machine same time on VirtualBox and Parallels Desktop"
Please help me, below is report: http://pastebin.com/YpX13MYc
Version Parallels Desktop: 8.0.18608
Version VirtualBox: 4.2.16
Thanks alot!It may also be one of these:
com.kerio.kext.kvnet 8.1.1
com.nvidia.CUDA 1.1.0
at.obdev.nke.LittleSnitch 2.5.3 -
Script runs not corrextly for first time
Hello,
i have kind a strange problem.
Always wenn i run my script first time (after opening Diadem), it works not corretly. Specificly creating a report goes wrong.
When i start the script for second time (and each additional time) everything works fine and correctly?!
For understand:
- I do some (mathemtical) analyse - always works correctly
- Load/Append prepared ReportLayout, add curves, create text objects - doesn't work for the first time, then it alwas works correctly
The mistake is, that all curves (that should be in several appended layouts and text objects) are added in the first loaded report sheet (though the reportsheets were appended)
As i said, when i start the script second time (and each additional time) everything works fine as it should?!
Thanks
Solved!
Go to Solution.Hello,
yes i tryed with debugger step by step. No errors. Ironically with debugger step by step everything works fine (even for he first time)
It looks like, when i run the script for the first time, the appended report sheets are not active, because all curves are added in the first report sheet.
But why works it wrong only for the first time and then everything works fine?
Thanks -
HT1338 Hi How can i reinstall OS Mavericks to make my laptop run like the first time?
Hi,How can i reinstall OS Mavericks to make my laptop run like the first time?
Hardware Information:
MacBook Pro (17-inch, Early 2011)
MacBook Pro - model: MacBookPro8,3
1 2.2 GHz Intel Core i7 CPU: 4 cores
6 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:59:22
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (407.34 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
PIXART USB OPTICAL MOUSE
Western Digital External HDD 500.11 GB
EFI (disk1s1) <not mounted>: 209.7 MB
WD-KENKEN (disk1s2) <not mounted>: 499.76 GB
Apple Computer, Inc. IR Receiver
FireWire Information:
Iomega eGo HDD 800mbit - 800mbit max
disk2s1 (disk2s1) <not mounted>: 262 KB
Iomega_HDD (disk2s2) <not mounted>: 1 TB
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
at.obdev.nke.LittleSnitch (4050 - SDK 10.8)
Launch Daemons:
[System] at.obdev.littlesnitchd.plist 3rd-Party support link
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.blackmagic-design.desktopvideo.XPCService.plist 3rd-Party support link
[System] com.blackmagic-design.DesktopVideoHelper.plist 3rd-Party support link
[System] com.blackmagic-design.streaming.BMDStreamingServer.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.noiseindustries.FxFactory.FxPlug.plist 3rd-Party support link
Launch Agents:
[System] at.obdev.LittleSnitchUIAgent.plist 3rd-Party support link
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
User Login Items:
iTunesHelper
Dropbox
RealPlayer Downloader Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.44 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 10.1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.0.0 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Safari Extensions:
Slick Savings: Version: 1.0
Searchme: Version: 1.3
Amazon Shopping Assistant: Version: 1.1
Ebay Shopping Assistant: Version: 1.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
RealPlayer Plugin: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Blackmagic Desktop Video 3rd-Party support link
Flash Player 3rd-Party support link
Tuxera NTFS 3rd-Party support link
Old Applications:
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
SA Color Finesse 3 UI: Version: 3.0.6(275) - SDK 10.5 3rd-Party support link
/Applications/Adobe After Effects CS6/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
dynamiclinkmediaserver: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
8% storeagent
4% WindowServer
1% EtreCheck
1% PluginProcess
1% RealPlayer Downloader Agent
Top Processes by Memory:
227 MB Safari
104 MB com.apple.IconServicesAgent
104 MB Messages
98 MB mds_stores
80 MB Dropbox
Virtual Memory Information:
2.62 GB Free RAM
2.06 GB Active RAM
182 MB Inactive RAM
1.13 GB Wired RAM
338 MB Page-ins
0 B Page-outs -
Itunes application error when attempting to open for first time. HELP
Running windows xp pro, just bought new ipod classic, installed itunes software. When attempting to open for first time i get an itunes.exe - application error, error message that reads "The instruction at "0x100001040" referenced memory at "0x100001040". The memory could not be "read". Click ok to terminate the propgram. Click on CANCEL to debug the program. I have tried re-installing several times, cleaned temp etc. Nothing. Please help, i really want to start using my new ipod.
You have to unhide your library folder and adjust the user permissions to allow write access.
Mylenium
Maybe you are looking for
-
Web Clipping portlet and https
We have an external ASP application that requires HTTPS authentication. We want to pull the application into portal via a Web Clipping portlet. However when we try start up web clipping studio with the https url we get the following error: 'WCS-517 -
-
SAP QM unable to pick Code group & code in creation of defect in QA32
Hi every one, I am new to QM , can any one guide me to solve this issue. In T code QA32 after results recording, am trying to maintain defect document of one of reject MIC. But, i am unable to pick Code group or code. System showing error "Code group
-
Help. Scripts in Tools menu in Bridge have vanished
I'm not sure if this is the appropriate forum to place this message, but I need some help, so here goes: I have CS2 installed on a G5 dual 2 Ghz, with 1 GB RAM. When in Bridge, under the Tools menu where there should be 3 submenus for Photoshop, Illu
-
Long Secure Times with many RICs
We are experiencing secure times of 8 to 15 minutes per table when the number of foreign key constraints is approx. 30 and the number check constraints is approx. 20. Total number of columns on our tables range from 35 to 60. I have tried converting
-
How do I troubleshoot a site to site vpn connection?
I have a site to site vpn connection setup to a client site that functions fine except for 2 ip addresses on the client are not responding. They insist the problem is at our end but I don't know how to troubleshoot it. The access rules are there for