SPM in SP10

Hello, Please can someone assist. I am setting up SPM. I plan to use Role based administration.
Do I need to do any set up in the UME. Previously in early release of 5.3 I used the UME to set up controllers, owners etc.
Is that still necessary. I have the security guide, and have printed out the HELP from the SAP website, but I still do not understand.
e.g. if I want a user to have a firefighter role, I know that i do that in the work bench, is it still necessary to allocate the user the role ?VIRSA/Z_VFAT_FIREFIGHTER, and do I do that via the SAP GUI?
Please can you help.
Thank you
Jill

Jill,
<< I plan to use Role based administration.>.
i expect in ABAP stack you had set concerened config parameter to YES, so that you can use Role base...
when you are using Role based SPM, then user work like regular user and don't need access to /VIRSA/VFAT tcode, as user is not required to login via SPM.
so user don't need FIREFIGHTER role
per my understanding.......... controllers and owners need to be set up in UME only if you use reporting in JAVA stack.
these will be dummy user ids, without any access in UME, however regular users in ABAP stack
please check user guide for more hlep.
regards,
Surpreet

Similar Messages

  • About Weblogic5.1 SP10?11? 12 CR detailed information

    Hello
    Although he wants to see that in which the details of CR information have
    appeared although it is due for me to use SP10 of Weblogic5.1 and to upgrade
    to SP 11?12 from now on, what one basket being aware is it? It is because
    he wants to know in detail the solution about what it is. I need your help
    well.
    Tomohiro?Tamura

    Hi,
    Your best bet is the service Marketplace with the release notes e.g.:
    RAR 1168120
    CUP 1168508
    SPM 1168121
    Alternatively, have a look at the application homepage (http://<server>:<Port>/index.html) and then select the Webservice Navigator application to see what's available and test them out.
    Cheers, Simon

  • No datasources in SPM after all refresh datasources option

    Hi,
    I tried Refresh all data sources option in SPM, checking the log it showed that the Metadata loaded message. But post that, I could not see any data sources in User preferences or datasource Administration. But I could the list in Application properties.
    This is a crtical issue as till this is resolved no reports are displayed.
    Regards,
    Sampat Desai

    Hi Sampat,
    We have seen this error in the case when some user is saving reports at the same time when refresh datasource is being done. Please try following steps which should most likely resolve this issue:
        1) Delete all nodes under the folder "/application/metadata" using the methods OPM_PS_GET_NODE_METADATA and OPM_PS_REMOVE_NODE(Please note that /application/metadata itself should not be deleted)
        2) Go to table "OPM_PS_ITEM_DET" and search for all objects with "NODE_TYPE" as "AUI_METADATA_CACHE". This will return all the nodes which are dangling as there should be no such value.
        3) Retrieve the GUIDs from step 2 and remove the existing nodes using the FM OPM_PS_REMOVE_NODE
    Thanks,
    Divyesh

  • Data not getting saved in SPM UI

    Hi,
    We have installed and configured SPM 2.1 SP3.. We ahve one issue.. Under Data Management-->Global Setting, we enter the path of import and export folders. When we save them, it doesnt get saved..
    Please let me know the root cause of this issue.. I have tested the connectivity between ABAP and JAVA.. Seems to work fine..
    Thanks
    Thilip Kumar

    Hi Thilip,                                                         
    Could you please check to see if you have an active Data Upload & system created? Without this the files will not show up.                      
    The Active Data Upload can be created from the menu item  Data Management > Data Upload Workbench > Manage Data Uploads          
    Click on New Data Upload and enter in all the required information and select the "Set as active" checkbox.                               
    For Systems goto Data Management > Global Settings and in the Systems tab create a new system.
    Thanks & Regards,
    Ankur

  • Error on External Serrvice Configuration Page NW 20047s SP10

    Hi All,
    I am working on CAF developement. I was trying to develop an CAF application using External Service. I used SAP ECC 5.0 server to import a RFC functional module. It was successfully imported in NWDS. Also it got successfully deployed on the Server NW2004s SP10. But when i opened external service configuration page -> service registery it gave me a null pointer exception.
    To solve the problem, i removed the RFC functional module from NWDS and
    re-deployed the same application, but the error is still there.
    One solution i got is to undeploy the application from the server. After doing this I was able to get the External service configuration page -> service registery without any error. BUT WHEN I DEPLOY THE SAME APPLICATION REMOVING THE RFC THE ERROR IS COMMING AGAIN.
    I think there must be some entry on the server which stores the External services imported on the NW 2004s server.
    Please Help. ITS VERY URGENT
    thanks in advance,
    Regards,
    Sheetal

    I am not using date in my program. Follwing is my error.
    Failed to process request. Please contact your system administrator.
    [Hide]
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException
        at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
        at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
        at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
        at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
        at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
        ... 47 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
    Version null
    DOM version null
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:12:34[UTC], changelist=421181, host=pwdfm101), build date: Thu Dec 28 17:06:00 GMT+05:30 2006
    J2EE Engine 7.00 patchlevel
    Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
    Operating system Windows 2003, version: 5.2, architecture: x86
    Session & Other
    Session Locale en_US
    Time of Failure Fri Jan 12 09:47:51 GMT+05:30 2007 (Java Time: 1168575471082)
    Web Dynpro Code Generation Infos
    sap.com/cafUIconfiguration
    SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
    SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    java.lang.RuntimeException: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
         at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:661)
         at com.sap.caf.wd.services.registry.VwOverview.wdDoInit(VwOverview.java:133)
         at com.sap.caf.wd.services.registry.wdp.InternalVwOverview.wdDoInit(InternalVwOverview.java:275)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
         at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:208)
         at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:657)
         ... 46 more
    Caused by: com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method getExternalInterfaces.
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:493)
         at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
         ... 47 more
    Caused by: java.lang.NullPointerException
         at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
         at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
         ... 48 more
    Thanks and regards,
    sheetal

  • FF Id Owner Name appears different in SPM report campared to Backend

    Hi Team,
    We have SPM 5.3 installed and we are using user based Firefighter concept.
    I have run the SPM report ( log summery report , transaction usage report and detail log report ) today. There the FF id Owner name appearing is different with respect to what we maintained in ' Owners' tab in backend firefighter Dash board. Even in the Backend log report  it is appearing different . Means at Backend and SPM ( GRC front end) both the  places FF id owner is appearing different w.r.t what we maintained in Owner tab of Backend system.
    Please suggest what can be the issue . And where I need to change the confirguration to make the report consistant with what we maintained in Owner tab of Backend system.
    Looking for your earliest response.
    Regards,
    Kakali

    Kakali,
    Have you got multiple owners defined in the backend system? Sometimes that causes inconsistencies.
    I have noticed that there is a Bug in SAP Note 1168121 which means that the owner is missed off the email log reports in SPM up to SP08 and that might also be the issue.
    Simon

  • Is there a way to mass update or replace the SPM Firefighter IDs table?

    We are upgrading from GRC 5.2 to 5.3.  In 5.3 FF/SPM has added an Owners field to the FF ID table (/virsa/zffusers), which is apparently a required field because I keep getting a "Invalid Firefighter ID Owner" error when I try to look at the table.
    Is there a way to mass update, or perhaps import/replace, this table?  I am having problems trying to update this table thru the FF table screen.  When I go to save my changes, it will return the above error because not all of the FFID records have an assignment in this new Owners field.  We have over 160 FFIDs, so I can't change all of the records at the same time.  I can only get about 20 per screen and it will return that error again when I try to page forward.
    Thanks.

    Hi Bob,
    that is perfectly possible - did it a few times already.
    Export the table from within Firefighter, download the owners table (sorry, need to look up the name tomorrow - but you can't miss it), then add the owners through an Excel vlookup. Then re-import the table in Firefighter, and you're ste.
    I'm at home right now - if you have difficulties getting this done shoot me a message tomorrow and I'll send you more details.
    Frank.

  • Error while creating Pop-up window in SAP NetWeaver 7.1 CE  SP10 PAT0001

    Hi  All,
       I am trying to create a pop-up in the SAP NetWeaver 7.1 CE  SP10 PAT0001 and jdk1.6.0_21. I am trying to create a pop-up window using the "New Features of Web Dynpro Popup Window - SAP NetWeaver CE 7.11" Link:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04870c5-749b-2b10-06ba-d25515ef39e3&overridelayout=true
    public void wdDoModifyView(com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
       if (firstTime)
            IWDWindowViewElement window = (IWDWindowViewElement) view.getRootElement();
    It shows the collowing error " IWDWindowViewElement cannot be resolved as type". I am using the latest version of NW CE and jdk but still i am unable to find the "IWDWindowViewElement".
    I have gone through a similar thread talking abt the same problem but it did not help. (Web Dynpro Popup Window Error in SAP Netweaver CE 7.11)
    Can anybody help me with this?

    Hi,
    I think the problem is rather the following:
    The guide says:
    "How to create a popup with the new feature mentioned above?
    Before starting you should check the version of your NWDS. This can be done in NWDS: u201CHelpu201D -> u201CAbout SAP NetWeaver Developer Studiou201D. The version information should look similar to the text below:
    SAP NetWeaver Developer Studio
    SAP NetWeaver 7.1 EhP 1 SP00 PAT0000"
    I tried the same guide on 720 and there the interface IWDWindowViewElement is available.
    So again, the problem is this:
      have the SAP NetWeaver 7.1 Composition Environment SP10 PAT0001 
    This means you have 710 (SP10 PAT1)
    The guide says you need EHP1 at least
    SAP NetWeaver 7.1 EhP 1 SP00 PAT0000
    This means 711 (SP00 PAT0)
    Best Regards,
    Ervin

  • Adding a Custom Hierarchy field to SPM query giving Server Error

    Hi
    I have enahnced the SPM data model with Organistaion Unit Infobject 0ORGUNIT as part of a
    enhancement requirement for using 0ORGUNIT Hierarchy .
    The field has been added to Bex Query - Spend Analysis Final and also appear in the SPM datasource.
    When I add this 0ORGNUNIT field to the SPM report in SPM UI , I get a server error.
    There isn't anymore information showing up about the error.
    I dont think I missed any step here . I a;lso checked the Analysis administration - Dimension Properties and all looks fine there.
    I can see the new field 0ORGUNIT showing up with Hierarchy selected.
    We are in SPM 3.0 support pack 7.
    Appreciate your quick help in this.
    Thanks
    Rettna Kumar

    Hi,
    Please check whether your key flex structure is frozen or not. If now please freeze it and re compile and try.
    This may helps too
    error while developing KFF in oaf
    Thanks
    Bharat
    Edited by: Bharat on May 10, 2013 4:51 AM

  • SPM Reporting - Log reports display on front end

    Hi,
    We have implemented GRC 5.3 and have an issue on the SPM reporting through the front end.
    We have done config in dev and have the following jobs running in the background every 1 hour:
    1. /VIRSA/ZVFATBAK
    2. /VIRSA/ZVFAT_LOG_REPORT
    3. /VIRSA/ZVFAT_V01
    4. /VIRSA/ZVFAT_V03
    The log on the back-end displays all activity of FF user, but when going to the front end I seem not to get any reports to display.
    We have created the connectors via the config page, but when trying to drill through the selection criteria we found that the FF user does not come up as a selection variable. We see the system defined though.
    Any suggestions how to get the reporting to display on the front-end?
    Kind Regards, Melvin

    Santosh,
    You should only need the /virsa/zvfatbak job running in the background. However, if the emails are not triggered for the log reports, you may wish to schedule the /virsa/zvfat_log_report program to run after completion of /virsa/zvfatbak as that is the program which actually sends the notifications.
    Regarding the RFC user, check the authorisations held in the Firefighter Administrator role as those will not be too far away!
    Simon

  • Scheduling Agreement in SAP SPM

    Hi
    We want to load scheduling agreement in SPM. We have two issues:
    1) What DATA TYPE should we select when loading the SAgreement
    2) Where can we find the schema file for SAGREEMENT as it is not available in the standard MASTER DATA schema file
    Regards

    Hi,
    Contracts and scheduling agreements are treated alike in SPM.  So use contracts data type to load your data.
    Rohit

  • Error occured when upgrading  PI (7.0) system  from SP10 to SP 20.

    We have upgrade our PI (7.0) system  from SP10 to SP 20.
    Here the proxy is used to update the database.
    Itu2019s failing at the synchronous proxy when XI is sending data to Proxy.
    Problem still exists even after regenerating the proxy.
    The following problem is faced
    The request  XML is like
    <?xml version="1.0" encoding="utf-8" ?><ns1:MT_PROCESS_INSTANCE_CREATE
    xmlns:ns1="http://spc_processes/generic"><OBJECT_TYPE>P01</OBJECT_TYPE><OBJECT_ID>4B7B87708C
    770176E10080000sa</OBJECT_ID><LANGUAGE>EN</LANGUAGE><DESCRIPTION>20100218-001 : xxxx
    bbb</DESCRIPTION><STATUS>01</STATUS><TYPE>2</TYPE><REQUEST_ID>200-001</REQUEST_ID><OBJ
    ECT_KEYTYPE>LASTNAME</OBJECT_KEYTYPE><OBJECT_KEYVALUE>zzzzzz</OBJECT_KEYVALUE><LAST_STEP_STATU
    S>00</LAST_STEP_STATUS></ns1:MT_PROCESS_INSTANCE_CREATE>
    And the response XML is
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Inbound Message --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProxy</SAP:Category><SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code><SAP:P1>Request Message</SAP:P1>
    <SAP:P2>CX_ST_MATCH_ELEMENT</SAP:P2>
    <SAP:P3>/1SAI/TXS00000000000000000036 Line 289</SAP:P3>
    <SAP:P4>System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE' XML Bytepos.: 112  XML Path: ns1:MT_PROCESS_INSTANCE_CREATE(1)</SAP:P4>
    <SAP:AdditionalText/>
    <SAP:ApplicationFaultMessage namespace=""/>
    <SAP:Stack>Error during XML =&gt; ABAP conversion: Request Message; CX_ST_MATCH_ELEMENT in /1SAI/TXS00000000000000000036 Line 289 System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE' XML Bytepos.: 112  XML Path: ns1:MT_PROCESS_INSTANCE_CREATE(1)
    System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE'
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
    I'm a bit new to PI.Please explain in detail.
    Thanks in advance!!

    Hello
    Try the following workaround:
    Go to trx: Sproxset:                                  
    - Name: ST_USE_LAX_ON                                 
    - Value: X                                            
    - User: <Empty >                                      
    - Inactive: <Empty >     
    Check the notes below:
    #1169688 New Features in Release 7.0 (SP14)
    #1162160 CX_ST_MATCH_ELEMENT in XML INBOUND processing
    Regards
    Mark

  • SPM Extractors from SAP R/3

    Hi, I am quite new working with SPM and currently investigating options for data extraction activity from R/3 to SPM.
    I could see there is an extraction wiki, were I found very useful information, and could see the main options are:
    1. Use SAP provided ABAP extractors (as a starting kit probably)
    2. Write our own ABAP programs
    3. Using other ETL tool, like for example BOBJ IM (Business Objects Integration Manager)
    My main concern is regarding performance, as I expect to have to deal with high volume of data. I'd like to hear some past experience on how SAP provided extractors work. Have any of you implemented these extractors or had the chance of seeing them running?. The delta capability works fine? Is it a delta just based on a document creation/change data? or other changes (in the master data for example, where we do not always have a change date) are also captured?. How much customizing should I considerate will be requested (of course I understand this depends on how much customizing do we have in our R/3).
    Is it worth exploring these standard extractors?. Or should I better start considering other option like BOBJ-IM? I think I will have to use BOBJ-IM anyway for some non-SAP sources of data which I also have to include.
    Any experience with these extractors is appretiated!.
    Many thanks.
    Regards,
    Claudia.

    Hi Claudia,
    Below are some of my comments in regards to SPM extractors.
    1.  Using SPM extractors as a starter kit is a great idea.  This will bring in all the necessary data from standard R/3 tables with the necessary logic to populate SPM.
    2.  Taking the route of writing you own ABAP program / extractors may be necessary only if you have quite a lot of customization in R/3 as your source for data.
    3.  Using BOBJ IM is necessary for extracting data from non-SAP data source.
    As always loading initial could be a lengthy process.  To speed up this process it is recommended to break it down to smaller manageable loads.
    Delta is primarily based on create / change date for both master data and transaction data.
    In terms of customizations, you are right depends on what you are looking for, you may end up adding new fields or writing some exit / code to add business logic to existing fields.  Have seen customers do a combination of both.
    Have seen quite a lot of customers take the route of delivered extractor which gives them a great start.  Secondly looking at the extractors you can tell exactly what tables and fields are used to extract data, that way even if you are planning to build you own extractors you know exactly what fields are needed.
    Regards,
    Rohit

  • Solution Manager 7.1 SP10 Upgrade using SUM 1.0 SP10 taking long time during the phase MAIN_SHDRUN/DDIC_UPG 38 Hours now

    Hello,
    We have Installed Solman 7.1 SP4 and now trying to upgrade to SP10.
    kernel release                721
    kernel make variant           721_EXT_REL
    OS windows 2008 R2
    DB: Oracle 11.2.0.3
    This seems to be stuck in Preprocessing Phase. 
    SAPup LOg
    CURRENTPHASE MAIN_SHDRUN/CMDFILE_UPG
    ...started at 20140507212957
    ...begin processing at 20140507212959
    ..finished at 20140507213914 with status SUCCEEDED.
    CURRENTPHASE MAIN_SHDRUN/DDIC_UPG
    ...started at 20140507213914
    ...begin processing at 20140507213916
    SAPup.ECO
    ### Phase MAIN_SHDRUN/DDIC_UPG:
    SAPup> Starting subprocess in phase 'DDIC_UPG' at 20140507213929
        ENV: DBMS_TYPE=ora
        ENV: JAVA_HOME=H:\usr\sap\SOL\DVEBMGS00\exe\sapjvm_4
        ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
        ENV: ORACLE_HOME=G:\oracle\SOL\11203
        ENV: ORACLE_SID=SOL
        ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
        ENV: PATH=H:\usr\sap\SOL\SUM\abap\exe;G:\oracle\SOL\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;H:\usr\sap\SOL\SYS\exe\uc\NTAMD64
        ENV: SAPDATA_HOME=G:\oracle\SOL
        ENV: SAPSYSTEMNAME=SOL
        ENV: auth_shadow_upgrade=1
        ENV: dbs_ora_schema=SAPSR3
        ENV: dbs_ora_tnsname=SOL
        ENV: rsdb_ssfs_connect=0
    EXECUTING H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
    "pf=H:\usr\sap\SOL\SUM\abap\var\DDICUPG.TPP" put SOL
    "-Dmainimp_proc=1" "-Dparallel=3"
    This is H:\usr\sap\SOL\SUM\abap\exe\tp.EXE version 380.13.51 (release
    721, unicode enabled)
    Looking for effective putsteps ... ... ready (looking for putsteps)
    ULOG
    ### Phase MAIN_SHDRUN/DDIC_UPG:
    soladm       20140507213919    : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
    pf=H:\usr\sap\SOL\SUM\abap\var\SHADOW.TPP setstopmark buffer=SOL
    before SAPK-70107INWEBCUIF  (pid=9528)
    soladm       20140507213929    : H:\usr\sap\SOL\SUM\abap\exe\tp.EXE
    pf=H:\usr\sap\SOL\SUM\abap\var\DDICUPG.TPP put SOL -Dmainimp_proc=1
    -Dparallel=3  (pid=14756)
    Parameter Values
    abap/heap_area_nondia                       300000000
    rsdb/obj/max_objects                        20000
    rsdb/obj/buffersize                         50000
    sap/bufdir_entries                          10000
    zcsa/presentation_buffer_area               20000000
    zcsa/db_max_buftab                          10000
    zcsa/table_buffer_area                      100000000
    rsdb/cua/buffersize                         10000
    rtbb/buffer_length                          60000
    rsdb/ntab/irbdsize                          15000
    abap/shared_objects_size_MB                 350
    abap/buffersize                             500000
    rdisp/max_wprun_time                        3600
    ztta/roll_area                              30000000
    Please help.
    Raghu

    I can see SAPupStat log as
    2014/05/07 21:17:05:  39.08% LEFT: 258:43:48 END: 2014/05/18 16:00:53
    2014/05/07 21:27:35:  39.14% LEFT: 258:23:47 END: 2014/05/18 15:51:22
    2014/05/07 21:28:31:  39.64% LEFT: 253:02:17 END: 2014/05/18 10:30:48
    2014/05/07 21:29:57:  39.81% LEFT: 251:18:37 END: 2014/05/18 08:48:34
    2014/05/07 21:39:14:  39.87% LEFT: 250:57:32 END: 2014/05/18 08:36:46
    Does it mean it will end on 2014/05/18 ?

  • SPM 5.2 - problem with reason/activity fields - not showing in the report

    Dear experts,
    I have a situation that is hard to describe.
    We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
    I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
    As you know the Activity field is mandatory text field and at least one character must be entered,  but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
    The worst is that I can`t simulate such cases.
    Have you ever heard of such nosense?
    Thank you,
    Iliya

    I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
    I hope the latest patches are fixing this!
    BR
    Iliya

Maybe you are looking for