SPM Reporting - Log reports display on front end

Hi,
We have implemented GRC 5.3 and have an issue on the SPM reporting through the front end.
We have done config in dev and have the following jobs running in the background every 1 hour:
1. /VIRSA/ZVFATBAK
2. /VIRSA/ZVFAT_LOG_REPORT
3. /VIRSA/ZVFAT_V01
4. /VIRSA/ZVFAT_V03
The log on the back-end displays all activity of FF user, but when going to the front end I seem not to get any reports to display.
We have created the connectors via the config page, but when trying to drill through the selection criteria we found that the FF user does not come up as a selection variable. We see the system defined though.
Any suggestions how to get the reporting to display on the front-end?
Kind Regards, Melvin

Santosh,
You should only need the /virsa/zvfatbak job running in the background. However, if the emails are not triggered for the log reports, you may wish to schedule the /virsa/zvfat_log_report program to run after completion of /virsa/zvfatbak as that is the program which actually sends the notifications.
Regarding the RFC user, check the authorisations held in the Firefighter Administrator role as those will not be too far away!
Simon

Similar Messages

Can we Report BW Cube using Cognos Fornt End tools

Hello, Experts.
We need some inputs on how to Report BW cubes using COGNOS front end tools.
is this possible?
do we need to develop new cubes out in cognos again for making reports?
and in BW cube some attributes of material are not navigational if we go to cognos can we use this attributs for drill down or filtering?
Thanks in Advance.
Bharath.

i am currently working on bi 7 with cognos 8.2 and go live very soon
- best approach is to use query as datasource for cognos (cognos consultants agree)
.......without query as datasource, cognos cannot see any reusable objects.
- If i recall, cognos can leverage attributes as navigational even if bw does not have them set that way.
- one downside is that you need to make sure all your rkf descriptions are locked down 100% because cognos uses the description in their xml definitions.
- Make sure you have an experience cognos framework modeler that knows ins and out and does not use simple wizards. same happened to us and lots of settings occured very late and slowed project.
reach out to me via my profile and i can give you pointers.

Front end query writing.

Hi gurus,
I know about query designer, Bex analyzer, Bex browser and other related topics such as variables, Conditions and exceptions? But i cant understand what's this Front end query writing or Back end data modelling. Will you plz give me detailed description on this topic, how it should be used in real time scenario.
Thanks,
Sameer.

Hi Sameer
If I understand ur question correctly
query designer, Bex analyzer, Bex browser and other related topics such as variables, Conditions and exceptions? all these are for creating queries and used for generating reports. So these come front end side.
And abt Back end data modelling, it is modelling thing we do in Adminstrator work bench(RSA1) i.e creating infoobjects, datatargets etc.,
In real time we will get the data from source system and store it in the data targets and infoobjects we modelled in AWB and then we report on this datatargets.
So this ETL and modelling part becomes back end and Reporting becomes front end.
I think it's clear for u now
Any doubts let me know
Regards
Kiran

ABAP New Front-end editor not opening in Windows 7

Hi ,
When I am trying to open a report with the ABAP New Front-End Editor with Windows 7 as OS, the system is getting freezed without navigating to any other screen .The SAP GUI that I am using is Release 710 with Patch level 17.
Please help me to sort out the problem
Thank You.
Regards,
Bala

Hello
please install the latest Sapgui patch 20 and the problem is solved.
BR
Sven

Promotions are not reflecting on front end.

Hi All,
I am facing issue with promotion display on front end even if i have configured it from ACC.
It should be automatically applied on the front end.Please let me know what can be the issue.
Thanks in advance
Neha

Promotions take some time to get applied.
If you create any promotions from ACC/BCC it will take some time to reflect, since promotions are picked up via a scheduler which usually refreshes in about 10mins.
You can go through the following link to understand more
promotion deployment in ATG commerce take time
but if you are saying the promotion is not getting reflected at all even after a server restart then problem can be different.
You might have to check the promotion offer and conditions for that.
Hope this helps!

Urgent!!Error in the front end when trying to view a report

Hi All,
I am getting this error when I am trying to view a report in the front-end.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)
Please let me know if you have any ideas.
Thanks.
Vinay Sai Konduru

Have a look at your login crenditals in the Connection Pool.
Regards
John
http://obiee101.blogspot.com/

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

Latest Front-End Support pack - Report Designer

Hi,
We are having some formating related issues in Report Designer in some of the Finance reports. I believe this is because of missing latest Support Packs or Patches front end.... for example, in report designer we unable to see the settings in the property window (on left) to display column headings on each page.
We are on front-end pack: BI Add-on 7.10, Support Pack 5, Revision 529.
Back-end: Support Pack 16.
Is this the latest one (for Front-end)?
If not, can you please let me know what is the latest support pack/patches available?
Thanks.
Samay
Edited by: Samay Mehta on Jun 11, 2008 10:28 PM

service.sap.com/swdc
Support packages and patches>Entry by application group>
Support Packages and Patches"> SAP Frontend Components"> SAP GUI FOR WINDOWS" >SAP GUI FOR WINDOWS 6.40>win32
also check
Using the BI 7.x Add-On for SAP GUI 7.10 - Requirements
hope this helps.
In general, the frontend patches are released at the same time as backend patches...
Therefore,usually
FEP9 is released with SPS9.
FEP10 is released with SPS10.
FEP11 is released with SPS11
FEP16 is released with SPS16
Hope it Helps
Chetan
@CP..

Crystal Report not running from Addon in the Front End.

Dear All ,
There is a Crystal report , .rpt File inbuilt in the Add-on .
This report runs well from the Source Code .
But i am facing problem , since it is not Opening at the Front End after registration of the Add0n.
Suggest what to do ?
Thanks
Ashish

Dear Rahul ,
In my system , there is a Addon , which has some crystal Report file inbuilt .
Which run on the Button Click event in the Form at the Front End (SAP GUI).
When we debug the Source Code and pass the event . . Report Open with no hurdle.
But the Same thing when we do at the From END of SAP , then it is not Returning any Report.
Thanks
Ashish

Unable to view FF reports in the front-end of FF 5.2 tool

After installing the FF tool on Netweaver, I am unable to see the reports from the back-end (R/3) system. The R/3 system has the FF 5.2 RTA installed and a user Id defined to connect to front-end of FF 5.2.
I configured the FF 5.2 connector, but still am unable to view reports from the front-end.
any suggestions would be helpful.
Thanks,
Kapil

I was able to resolve the issue by maintaining the gateway in the SAP adapter and running the transaction /VIRSA/ZRTCNFG on the abap side
thanks for the suggestions
Kapil

Front end Backend Modeling Configuration Reporting and Extraction.

Hi..All
Can Any one plz explain the terms "Front end","Back end" related to Modeling,Configuration,Reporting and Extraction.
Thanks & Regards
Jonn
[email protected]

Hi,
Frontend is the reporting aspect, i.e Workbooks, queries, Web reporting, Crystal reports, etc.
Its called the frontend as that's what the users see and they don't see what goes on in the 'backend' i.e Config and Extraction, data manipulations, etc.
Modeling is used to design the cube, ODS, etc. Also modeling concepts can be used to design frontend queries as well.
Cheers,
Kedar

2 Front End Servers with reporting enabled in topology but only one server shows reports

Hi,
We have 2 Front End Standard pool servers with resiliency enabled between them. The monitoring service is configured in the topology so that both Front End Servers point to the same monitoring database. We have half our users homed on 1 Front
end and half the other users sitting on the other Front End. In the Reports we can only see information on Audio calls made from users that are sitting on our Primary Front End Pool Server however we cannot see call information from users that are sitting
on the other front end server?
Thanks, Kevin

We have applied the backend updates and verified the config by running Test-CSDatabases cmd-let . I ran enable-cstopology and ran bootstrapper.exe and rebooted both Front End Servers, however we are still unable to see monitoring data of users
homed on our second Lync Front End server.
Any other suggestions? Thanks for responses so far, appreciate the assistance!
DatabaseName               ExpectedVersion            InstalledVersion
xds                        10.13.2
10.13.2
lis                        3.1.1
3.1.1
rtcxds                     15.13.1                    15.13.1
rtcshared                  5.0.1                      5.0.1
rtcab                      62.42.2                    62.42.2
rgsconfig                  5.5.1                      5.5.1
rgsdyn                     2.2.1
2.2.1
cpsdyn                     1.1.2
1.1.2
and ......
DatabaseName               ExpectedVersion            InstalledVersion
LcsCDR                     39.82.2                    39.82.2
QoEMetrics                 62.90.1                    62.90.1

How to insatll crystall report designer at front end

Hi experts.
Can any one please tell me
How to insatll crysatll report at front end.i.e I am unable to Find Which setup To Run for this Installation?
Can any one give me A Pdf article Related to insatllation. or any Link.
Regards
Naresh.

Assumming you are not installing a third party application or just the runtime packages there should be a setup.exe in root folder of the DVD/CD.
Install.pdf is on the CD also.
Don

SPM configuration and log report email

Hi all,
I'm configuring the SPM in the ECC system. I follow the note 1065048 but I don't receive any email about the report log of the activity done by the firefighter, but I receive the mail about the login.
What can I do to fix the problem?
ps:
the report /VIRSA/ZVFATBAK takes a long time to finish
the report /VIRSA/ZVFAT_LOG_REPORT always dump for no space to extend an internal table
Edited by: place87 on Oct 7, 2010 5:04 PM

Luchinho,
Firefighter background job picks data from STAT files and table CDHDR if FF configuration parameter 'Retrieve Change Log' is set to YES.
STAT file is maintained my RSCOL00 job, which should run hourly in your system.
So please schedule it first.
Then check what is size of CDHDR table, as select query on this table takes long time if table is too big. In that case, you may have to create Index on this table. There is one SAP note for this, don't remember the number please search with 'CDHDR' under GRC.
There are few parameter in configuration which send Log Report mails immediatly, so you need to set them to yes. This means your controllers will get Log Report mails every hour when /VIRSA/ZVFATBAK runs.
Pls refer to SAP notes 1494107, 1430336, 1065048, .
regards,
Surpreet

Integrate reports with c sharp front end application

Hi i m very new bie at reporting world.
i do not know how to integrate reports with c sharp front end application.
can anyone explain or provide me good url
for explaining how to merge or integrate reports with c shapr front end application ?
thanks.

Hi Nirav,
It seems that you want to integrate crystal reports with SDK's
Have a look to [DevLibrary|https://www.sdn.sap.com/irj/boc/sdklibrary] and [samples|https://www.sdn.sap.com/irj/boc/samples].
Regards,
Shweta

SPM Reporting - Log reports display on front end

Similar Messages

Maybe you are looking for