SPM - Spend by Buying Organization

Hello,
We have SPM 2.1 SP6 Patch 3. We have loaded data and also have hierarchies created.
When we try a new report with Buing Org and Spend, then we get a report with "Unassigned" and a a total value. The report just has only one line. Even though we have loaded all buying org, the report doesnt show spend for individual buying orgs.
Is DSE mandatory to have a report with Buying otg as dimension?
Regards,
Prasanna

Hi Vimal,
Thanks so much. I did like what you mentioned and now I do get proper reports when I use 0XSABUYORG instead of 0XSARBUYORG in new reports.
But in that case I still have 2 questions:
1. The standard OOTB reports still show "Not assigned" as I think it uses 0XSARBUYORG. Why does OOTB report use 0XSARBUYORG if it doesnt work?
2. What needs to be done so that both OOTB and new reports work?
Please note that the hierarchy for 0XABUYORG already exists.
Regards,
Prasanna

Similar Messages

  • SPM(Spend Performance Management) on HANA

    Hi Experts,
    I need to implement the solution wherein we need the SPM tool to run directly on HANA.
    Please let me know if any documents available on the same. or if anyone has delivery such a solution.
    Thanks.
    Rohan

    Hi John,
    Thanks for the response. When you say the standard install will do it, could you please guide me on how to go about it. I am new to HANA. Need to know how i would be tackling the implementation of SPM directly on HANA.
    Please let me know the details on the same. Please share the blueprints if any.

  • Spend analytics 2.0

    Hi all,
    I understand implementing Spend analytics if you are merging SAP and non SAP data into SAP BW.
    However, if all your data is coming from SRM and ECC what is the value added? There is an OSS note to be applied to get some additional Z* extractors into ECC/SRM but wouldn't reporting from std. BC would do just the same thing, i.e. combining data from contracts, POs, invoices and AP.
    thanks

    Hi Joseph
    I am the dev architect for SPM (Spend Performance Management) application. This also used to be known as Spend Analytics. I can try and answer any question you might have for this application.
    Collating data from multiple sources and classification and normalization of that data is just the starting point. A very important one, because without a normalized data set (at least Suppliers, Categories and Regions), there is no good way of getting that strategic view on the data set. Once you have a consilated data set you can then build upon it to gain further insight into your Spend data from a higher level analytical point of view.
    So not only you can have a complete view on your Spend data by /* dimensions (like Supplier, Category, Item etc), but also, the next level, answer a lot of additional analytical questions like is my purchasing optimized across suppliers, whats my off contract Spend, what is my Spend variance. The level after that is bringing in budgeting/forecasting information, tying it in with Spend projects (if purchasing orgs are set up for project driven purchasing methodologies) and finally add elements like supplier risk analysis and commodity price tracking.
    Additionally integration with other transaction systems allows for closed loop actionable analytics.
    Voodi's post above is correct, especially when it comes to IT/admin side of the application. BW expertise is a must and Spend training/implementation exposure is a plus. But for the business user/end user this is a much simplified application, especially compared to our previous offerings (the BEx portfolio). We believe that a novice user can use Spend and rampup pretty quickly.
    So, as you can see, SPM covers a lot more than just consolidation of Spend data. Source of data (SAP systems  and others) are your starting point.
    Hope that answers.
    Regards
    Rajesh

  • Add Employees to Buying Center, not only Contacts

    Hi there,
    we want to use the Buying Center functionality, mainly in the opportunities.
    When I add a buying center and want to add contacts to it, it is impossible to select any employee.
    Is there a possibility to add employees to the buying center? One would be to add all employees in the role BUP001, but this is no real solution for me.
    Best Regards,
    Fabian Nothacker

    Hello!
    As far as I know, this is not possible but Iu2019m not sure from a technical point of view.
    Usually the Buying Center is always an external view of the buying organization and never of the internal u201Csellingu201D organization.
    However I think the Use-Case perfectly makes sense to have a u201CBuying Centeru201D and a u201CSelling Centeru201D and to combine this.
    Best regards
    Arno

  • Windows 7 and Acrobat 9 Pro (CS4)

    Oh please, oh please won't someone help me.  Someone else HAS to have run into this.
    I install CS4 and enter serial number on a Windows 7 RTM machine (64-bit).  It tells me I'm activated.  And I can use all the products just fine - except Acrobat.  As most of you know - CS4 without Acrobat is a little like buying a car without a steering wheel.  At some point, you're going to need it.
    When I run acrobat, I get this: "Adobe Acrobat was installed as part of a suite. To enable Adobe Acrobat, please start another component of this suite (such as Adobe Photoshop)."
    So, here's what I've done:
    1) Deactivate, uninstall, reinstall, activate.  No go.
    2) Deactivate, uninstall.  Install just Photoshop CS4 and Acrobat.  Run Acrobat and I get the message, so I run Photoshop and it activates and then I run Acrobat again.  Same message.
    3) Referred to article at http://kb2.adobe.com/cps/407/kb407134.html - but the file versions I have on Win 7 are higher than the ones specified in the article.
    4) Called phone support.  No help there - "Uninstall and re-install and you should be good."
    No matter how many times I uninstall/reinstall or what order I do it in, I get this error on all of our Win 7 machines (3 of them).  And the best part?  Each install takes about 45 minutes or longer.
    Please don't tell me that Windows 7 isn't supported yet.  Release date to full market is scheduled for October 22nd so if someone doesn't fix this issue they're going to have a LOT of support calls on their hands.
    I understand Adobe does this to limit piracy of their software.  But at this point, they've basically rendered $1,000's of spending for our organization completely useless as we need to be able to produce PDFs of our work from CS4.
    Help?
    Thanks,
    Mark Gerlach

    Please directly contact Adobe Technical Support via phone. They should assist you with this issue.
              - Dov

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • Iphone 4 Home button not working after upgrade to OS 4.3.1

    I've just upgrade my iphone 4 to OS 4.3.1 and I'm having issues with home button not working. Need to hit it several times before I can close an app or wake the iphone. Any one having this issue?

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • How do I use an IPhone 4S (I purchased in Tokyo ) in Mumbai! It's locked

    How do I use an IPhone 4S (I purchased in Tokyo ) in Mumbai! It's locked. The carrier there was SoftBank and I have cleared all my dues with them. They refused to unlock it at the time of termination of contract. Now I'm in dire straits .......do not want to spend o buying another one when there are already two lying at home. Please help

    Sell the devices you currently have to someone that can use them with the carrier they are locked to.  Put those funds towards the purchase of a device that you can utilize with the carrier of your choice.

  • GTX680 Twin Frozr 3 dead fan

    So this card is like one and a half years old.  The back fan over the chip has stopped working, never made any noise or gave indication that it was about to go dead.
    Ive contacted my manufacturer  (AVA Direct) and they want me to RMA the card through you, which (no offense) I want to avoid at all costs because it can take ages to RMA through MSI.
    So im essentially left with three options.  RMA if and be out a card for a month, or get that GELID Icy Pro aftermarket cooler and install that, which I can only assume voids the warranty.
    I watched a video on youtube with a guy who did this exact thing with the exact card, and in the end he said that the fan was dead on the aftermarket as well, and that it must be a PCB board issue, as the fans both worked directly plugging them into the mobo.
    This leaves me with a third option perhaps, and that would be unplugging the fan connectors, getting a fan connecter extension, and sticking them into my mobo smart fan slots.  This is the cheapest route and the fastest.  Im curious what kind of extension I need (assume its a 4 pin extension) I haven't removed the actual card fan plug yet as it looks difficult to do (not a lot of room) and would rather wait to hear from someone who knows these cards before doing it.
    Also the aftermarket cooler doesn't look difficult at all to do, as much as I want to spend $60 buying what is essentially the same cooler I bought with this card stock.
    I also have had some reoccurring driver crashes, did a driver wipe and fresh install.  Seems to occur after sleep mode or when idle after a heavy load.  Not sure if its just NVidia drivers doing to sht or the card...ran a memory test on the VRAM and it was fine, and my PSU is a Corsair HX750 which is a good one.
    So for anyone familiar what would be my best route here?  Do I roll the dice on a full RMA and hope I don't get a refurbished with issues and be without a card for possibly a month +?  Do I try the smart fan plug on my mobo?  Or should I just swap out the heatsink (I will say a say dead after 1.5 years doesn't instill confidence in this heatsink)

    Quote from: Nichrome on 15-February-14, 00:15:59
    I'd RMA the card, no matter how long would it take. Because you can apply better TIM and you're done (doesn't void warranty as long as you don't damage any part, but contact MSI just to make sure), but other day another fan might just die on you and it might be just a day after warranty expires.
    Im a bit confused, you suggest to just RMA the card, which tbh over one dead fan seems a bit excessive, regardless its an option.  But I don't know your reasoning.  "Because you can apply better TIM"  im not sure what TIM is.
    Id really loathe losing my card for a month or more just over a dead fan, which is why im trying to think of alternatives here.  However I want this issue fixed by summer since its cold and my temps will most likely creep into danger zone once my room gets 10-15 degrees warmer.

  • How to add more than one graph to a pivot table??

    Hi,
    I have a report containing product,store,offers per store as dimensions and spending,Buying households as measures.My requirement is to show 'Store' in a section and corresponding report(which contains product,offers of that store,spending and Buying HH) and individual graphs for spending and buying households( 2graphs).I mean if I have 3 stores, I should get 3 sections of stores and each section should contain corresponding report and graphs. The main requirement is that "USER" should able to export or print the whole report at a time.
    I used pivot table to achieve this but I could only show one graph per store but I need two graphs for both spending and Buying HH.Please help me how to achieve.
    Your valuable suggestions are well appreciated!!!

    Hi,
    I have a report containing product,store,offers per store as dimensions and spending,Buying households as measures.My requirement is to show 'Store' in a section and corresponding report(which contains product,offers of that store,spending and Buying HH) and individual graphs for spending and buying households( 2graphs).I mean if I have 3 stores, I should get 3 sections of stores and each section should contain corresponding report and graphs. The main requirement is that "USER" should able to export or print the whole report at a time.
    I used pivot table to achieve this but I could only show one graph per store but I need two graphs for both spending and Buying HH.Please help me how to achieve.
    Your valuable suggestions are well appreciated!!!

  • How to find a specifc message in ES Workplace

    Hi,
    I'm using ESWorkplace to access eSOA services.
    In order to see the eSOA services available I'm using the SAP ES Explorer but I cannot find the eSOA service I need to use. The specific service I need to use is: [http://iwdfvm2160.wdf.sap.corp:51080/socoview(bD1lbiZjPTIwMCZkPW1pbg==)/smdisplay.asp?id=2573749F716511DA36BB000F20DAC9EF&fragID=2573749F716511DA36BB000F20DAC9EF&packageid=DBBB6D8AA3B382F191E0000F20F64781&context=&iv=|http://iwdfvm2160.wdf.sap.corp:51080/socoview(bD1lbiZjPTIwMCZkPW1pbg==)/smdisplay.asp?id=2573749F716511DA36BB000F20DAC9EF&fragID=2573749F716511DA36BB000F20DAC9EF&packageid=DBBB6D8AA3B382F191E0000F20F64781&context=&iv=] (in order to create a Sales Order from a Purchase Order created in the buying organization).
    Do you know if all eSOA services are available in ES Workplace system? And how I can find out this one? I have tried to use the search button but there are no results for the "PurchaseOrderRequest_In" message.
    Thanks for your help
    Trinidad.

    Hi Adish,
    In order to discover the ESWORKPLACE services I use the tool called "SAP Enterprise Services Explorer for Microsoft .NET". With this tool I can give a Services Registry URL and then browse the offered services.
    As Services Registry I use the URL: http://sr.esworkplace.sap.com/ServicesRegistrySiService/ServicesRegistrySiPort
    In the address you propose there is an "erp" starting point instead of "sr". I think this is the reason I cannot see it.
    Do you know the Services Registry URL I can use to have the possibility to discover the wsdl you propose?
    By simply adding the reference to the wsdl url you gave me .NET doesn't do all needed configuration (that the
    SAP Services Explorer for .NET does).
    Thanks a lot
    Trinidad.

  • Does anyone have an email address for someone who cares at Verizon Wireless?

    I have had enough with Verizon Wireless and their lack of service and NO WAY to contact tech support. Which of you brave people will speak up and answer this question? Any way to get answers on ANYTHING to do with lack of phone service, no connection, weak signal/no signal, lack of coverage, etc. Why am I having to ask this question in a "community" forum? Why isn't there a link on this useless website for something other than spending money, buying new equipment, upping my contract? Should any company's customers have to use a forum and speak their mind or go to Facebook or Twitter for support. (Which by the way is just another forum and a pacifier.)
    Would someone FROM Verizon Wireless with KNOWLEDGE and answers PLEASE contact me?
    I've got an email ready for you. I sent it to the email address that
    was shown on our VZaccess Manager but guess what? It's BOGUS!!!
    Don't try support@verizonwireless either because that is bogus.
    I've already complained to the FCC like thousands of other people.
    Watch out or you will end up like Ma Bell did years ago.
    BUSTED UP.
    Feel free to contact me at (email address removed)
    Don't bother trying to call me on my cell phone. BECAUSE
    IT DOESN'T GET A SIGNAL WHERE I LIVE 3 MILES FROM
    TOWN.
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

    After doing some more research here are the people I am trying to contact in the executive branch:
    http://www.verizonwireless.com/aboutus/leadership/executive.html
    And now for the regional contact info:
    http://www.verizonwireless.com/aboutus/leadership/area.html
    Had to answer my own question. Thanks a lot customer service. Once again you have failed me.

  • Capture cost of procured materials in a third party sales order scenario

    Dear Experts,
    I'm developing a third party sales order solution to my company following the recommended third party scenario by SAP.
    Everything is working fine from creation of sales order, automatic creation of purchase requisition, create purchase order using the purchase requisition ect...
    The problem I have is the in the Sales order, the cost of the material is not getting captured correctly. The condition maintained in the sales order is VPRS and it is deriving the material cost from the material master record. Ideally it should be deriving the material cost from the invoiced value or else from the purchase order(which is the actual amount we are spending to buy the items). Deriving the cost from material master depicts an incorrect profit in the sales order.
    Can someone please advice me how to derive the cost(to be shown in the sales order under VPRS condition)from the invoice or the purchase requisition and Not from the material master.
    I'll be grateful if you can describe in a step by step proceedure.
    Thanks in advance

    Hi Lakshmipathi
    Thanks alot for your response.
    As u mentioned, at the point of sales order creation the price does gets picked up from the Material Master.
    But during Billing, it does NOT get updated to reflect the purchase order price. If that happens, then its perfect.
    I did a complete testing cycle and the material master price remains unchanged throught the process upto billing.
    Is there any special parameter that I should maintain in VPRS condition for this to happen?
    Anyway thanks again for ur reply, appreciate it alot. Let me know your views on this.
    As u advise I'll post it on the sales forum as well.
    Regards,
    Randika

  • Hitachi 400gig HD as a 2nd Drive in RAID1

    Hitachi HDS724040KLSA80 - I am in the process of ordering one of these as it is the same HD that came in my PM-G5 2.3 as the standard drive. I wanted another identical drive as an internal RAID backup drive.
    Goal: To have a 2nd drive as a backup/mirror of the 1st drive.
    - I am considering to RAID1 the two drives together as a backup solution.
    - I want an internal solution that does not involve more cabling and peripherals lying around.
    I have also considered the new 500 gig version as its faster and has more storage, but am swayed by having an identical HD (in speed and storage spec as the original). Is this necessary?
    Another idea I had was to get 2 of the newer 500 gig drives and use them and take out the original drive and use that in an external casing as portable/external backup solution (can share data between my 4 Macs). But will this invalidate my 3 year Applecare?
    (I am a home computer user and have tons of video on the HD as well as photos, ALL our cd's, so a multimedia user, as well as the regular office, internet stuff.)
    I am new to this, but have a good BASIC understanding of all this, but would appreciate any input from more knowledgable folk.
    Appreciate any and all help.
    PowerMacG5 dual2.3,400HD,1.5gRam,20"CD + iMacG4-17,80HD,1gRAM   Mac OS X (10.4.3)   Apt Exp & Ext,iSight,iPod,BT m&k,Mighty-mouse,eyeTv,Nikon D70

    OK, so I've shelved the RAID1 idea. Seem the popular opinion is that that is not the way to go for backup purposes.
    Q: So what benefit do I derive from installing a 2nd HD inside the computer?
    I don't really need the storage space (Yet!) as 400 gig suffices for my home needs, but I do want a secure systematic (nightly, or even weekly backup of my Home Directory, or selected parts of - I don't need to backup all the TV shows the eyeTV records!)
    I just thought that putting the 2nd drive within the computer would save space and be ALWAYS ON/READY for backup at a faster rates. If I could get an internal solution that would be the best... What do you guys think?
    Is an external HD the best solution for backup? Any recomendations? (Lacie seems to get bad reviews EVERYWHERE!) I would like a 400GB HD as minimum if possible.
    Allan, as some people (inc. you I think) have 2 internal drives, 1 for the OS, and a 2nd one for data (iTunes music, iPhoto pictures, iMovie7iDVD projects etc...). Then this is backed up on a regular basis on to an external drive as the back up solution. What drive would you recommend as the OS (boot?) drive, as I guess it can be a smaller 80gig drive? Then I can leave the 400gig OEM drive in its place as the data drive and buy an external 500gig backup drive for the whole lot.
    Sorry if I sound a bit basic, I'm new to this and don't want to:
    a) get lost in the tech info
    b) spend hundreds $ buying multiple 400gig drives etc.
    c) have the best backup solution
    I don't want to loose everything from a HD failure again (as on my PB-12).
    I appreciate all your comments and recomendations.
    iMacCat.

  • About Mac Pro RAM and one "Nehalem" Processor 2.8 vs 3.2

    Hi,
    Unfortunately I don't have so much money to spend but I find Apple products very high quality and in same time very expensive, specially for my country (Russia), according to statistic, it’s less then 1% of people that using Mac Pro in here, my country really poor :/
    I never use Mac before, but I think that time is come and I would like to buy one on my birthday soon (22 November). I really tired of my crazy PC with Vista, it’s always bugs lags, and so on, it’s poor machine. I can buy new PC with i7, nice performances or buy Mac, but I think, Mac will be more quality and stable.
    I'm web designer and programmer and using my PC with Adobe programs, normally Photoshop, Illustrator, Dreamweaver, very rare with After Effect (1 day per month). Sometimes I’m playing games like Dragon Age or CS:Source, Starcraft2. But I got PS3, but unfortunately it’s connected to our main home TV, and I can’t play PS3 because all day this TV watching my family :/ lol
    I’m not sure if there are any way to connect PS3 to TV and computer screen at the same time… but it’s another question.
    Now about Mac I'm wondering of buying cheapest Mac Pro 2010:
    # One 2.8GHz Quad-Core Intel Xeon “Nehalem”
    # 3GB (3x1GB)
    # 1TB 7200-rpm Serial ATA 3Gb/s hard drive
    # ATI Radeon HD 5770 1GB
    # One 18x SuperDrive
    But at the same time, I wondering about how long time I will be able to use this Mac, and enjoy it before it will come too old. Because I just can’t spend and buy Mac every 2-3 years.
    I’m looking forward to use it for 4-5 years I think or so. I know it’s very hard question and I’m not really sure if it’s right to discuss it, but I’m saying just what I think.
    And maybe because of this, it’s better to order processor with 3.2Ghz, and a bit more RAM (8GB (4x2GB))? What you think?
    And what will be the different between this 2 processors and more RAM? Because it will be +800 USD or so, and it’s very expensive for me (pay addition 800 Dollars), I just want to ask you if it will costs this money. Unfortunately I can’t spend more money on Mac to buy 6-core Westmare and more RAM But I think cheapest Mac, for my tasks already very powerful and awesome, what you think?
    And if you’ll advice me, not to pay addition 400 USD for +0.4Ghz, and the different is very little, then what you think about addition Ram for stock MAC?

    Thank you hatter.
    I'm appreciate for your help and answer, and this amazing links! They are very helpful.
    I find some interesting information. And most interesting is SSD thing. But unfortunately it's very expensive for me
    I got 2 ways to go, and I really confused now. I take a look what you said, about making a PC with i7. And here is what I find on our Russian market - only 1 company which offers high quality custom PC's with up to 3 years guarantee.
    What they can offer:
    Price: $2060
    (Basic Config: DEPO Ego Z71i)
    OS:
    Microsoft® Windows 7 Home Premium RUS 32-bit
    or
    Microsoft® Windows 7 Home Premium RUS 64-bit
    MotherBoard:
    *ASUS P6T, Intel®X58 chipset , DDR3, ATX*
    CPU:
    *Intel® Core™ i7 Processor 930 (4-Cores, 2.80GHz, 4.8 GT/s, 8Mb)*
    Intel® Core™ i7 Processor 950 (4-Cores, 3.06GHz, 4.8 GT/s, 8Mb) +$365
    Intel® Core™ i7 Processor Extreme Edition 980X (6-Cores, 3.33GHz, 6.4 GT/s, 12Mb) +$1150
    RAM:
    *3Gb DDR3-1600 Corsair Dominator, Triple Channel*
    6Gb DDR3-1600 Corsair , Triple Channel +$40
    12Gb DDR3-1600 Corsair , Triple Channel +$260
    HDD1:
    *1TB SATA hard drive (7200rpm)*
    2 x 1TB SATA hard drive (7200rpm) +$80
    4 x 1TB SATA hard drive (7200rpm) +$230
    2 x 2TB SATA hard drive (7200rpm) +$355
    4 x 2TB SATA hard drive (7200rpm) +$790
    HDD2:
    WD VelociRaptor 150GB, 10000rpm, 16Mb cache, SATA-II +$175
    2.5" 64GB SSD SATA II +$205
    WD VelociRaptor 300GB, 10000rpm, 16Mb cache, SATA-II +$285
    2.5" 128GB SSD SATA II +$405
    RAID:
    RAID0 (required minimum 2 HDD) +$10
    RAID1 (required minimum 2 HDD) +$10
    Optical Drive 5.25":
    *DVD±RW/CD-RW/DVD 16x4x/5xDL/16x4x/16x/48x/24x/48x*
    BD-ROM&DVD RAM&DVD±R/RW, 5x/5x/12(R9 6)x/6x/12(R9 4)x/6x/12x/24x/24x/32x +$130
    SuperMulti Blu-Ray ReWriter +$235
    Card Reader 3.5":
    *Card Reader/Writer 50 in 1 (CF/MD/SM/MS/SD/MMC)*
    Video:
    *ATI Radeon™ HD 5870 (1024МБ, PCI-E TV-out DVI+HDMI)*
    1536MB NVIDIA GeForce 480GTX PCI-E DVI +$110
    2x ATI Radeon™ HD 5850 (1024МБ, PCI-E TV-out DVI+HDMI) +$230
    2x ATI Radeon™ HD 5870 (1024МБ, PCI-E TV-out DVI+HDMI) +$490
    Sound:
    *Realtek 7.1 (integrated)*
    Creative Sound Blaster X-Fi™ Titanium Fatal1ty Champion Series +$400
    Power:
    *800W (12sm)*
    1000W (14sm) +$50
    1200W (14sm) +$55
    WiFi:
    *WLAN 802.11bg*
    Mouse + KeyBoard: (lol)
    Without mouse and keyboard -$75
    Cordless Desktop® Wave Pro™ +$75
    Maitance:
    *1 Year*
    2 Years +$10
    3 Years +$20
    Ok, that’s it.
    DEPO - It’s our Russian company so I can’t give you link on English web page, but if you are interesting to view it, maybe with Google translate:
    http://www.depo.ru/H/MDL658/1000004953/zconfigurator.aspx
    And I’m not really sure, if they offer high quality components, and I can’t check it.
    I just don’t want to repeat same experience like with my previous computer – I bought top computer for very high price with top components, but everything was bugging, it’s terrible, I’m working with this computer 3 years now (it’s cored 2 duo with radeon x1900 and vista :S video card - without supporting DX10-11, 2 Hdd 500Gb RAID 0, - maximum lags – I cant’ even make a diagnostics… crazy). And I’m so sad about this computer, and I don’t want to repeat same experience. That’s why I wonder about Mac Pro or any other quolity PC, but price is too high, or if I buy just normal Mac Pro:
    • One 2.8GHz Quad-Core Intel Xeon “Nehalem”
    • 3GB (3x1GB)
    • 1TB 7200-rpm Serial ATA 3Gb/s hard drive
    • ATI Radeon HD 5770 1GB
    • One 18x SuperDrive
    • Apple Magic Mouse
    • Apple Keyboard with Numeric Keypad (English) & User's Guide
    For 2499 USD, I still need to add more RAM, and It will costs 2874 USD with 8 Gb, but without changing Processor and/or HDD for SSD to speed up computer like **** and enjoy it every minute. I maximum can spend 3000-3200 USD for new computer. And all I want, to enjoy it’s stability and speed. To load photoshop in less then 5 seconds, working with AE a bit, 3dmax a bit, play a bit. Maybe I want to much :/

Maybe you are looking for