SPML request type identification

I have a need to be able to identify which type of request I received while still in the SPML form. Anyone know of a variable or attribute that may be of any assistance to me? The "<spml:addRequest" is right there at the beginning of the request. I just can't figure out how to get at it.
Thanks -T-

Even we have the same requirement. Have you been able to capture the request type?

Similar Messages

Do I have to configure realm policy in Access Manager for IDM SPML Request

Hi all,
I wanted to run a SPML request from my application to the IDM which is presently protected by an AM server. Somehow, I get the following error, while I run a search using SpmlClient:
org.openspml.util.SpmlException: Unsupported response content type "text/html", must be: "text/xml".
Do I have to set a policy in Sun Access manager for the realm? Guys, pls help.
Thanks,
Aneesh.

> I believe as long as you have access to the above two you can turn the CA off if you want.
Enterprise CAs are not intended to be offline. Therefore, you should not turn off them. If these root CAs issue certificates only to subordinate CAs, then you should consider to implement offline Standalone (not Enterprise) Root CAs.
> I believe the location of the CRL is detailed in the CDP which is detailed on the Certs issued but a given CA, so the client can look in the Cert and see what it states about the CDP and thereby get the list of revoked certs.
this is correct.
> to place its CDP at a location other than the default location in case it overwrites the existing CRL at the default location
no, CDP locations should be defined in the post-installation script.
> does the fully qualified X500 name of the CDP include the CA Name (and therefore be unique) and it will not over write the original
yes, LDAP URL includes CA server's NetBIOS name to differentiate between CAs.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

Coded UI -Unit Test Adapter threw exception: Unable to load one or more of the requested types

I am working on silver light bases share point application using visual studio 2012 with C#
While debugging coded ui tests with ui maps i am getting this error.
I have taken the solution developed by team member containing test methods and trying to debug/run the test methods which contain ui maps I am getting
Unit Test Adapter threw exception: Unable to load one or more of the requested types.Retrieve the loader exceptions property for more information.
When i exclude the tests that depend on ui maps and debug/run remaining test methods I am not getting this error and able to run/debug test methods successfully
But when I include the test methods related to ui maps and tried to debug i am getting this error.
Please help me in this.

Thanks for Fouad's help.
Hi usha.talasila,
>>Unit Test Adapter threw exception: Unable to load one or more of the requested types.Retrieve the loader exceptions property for more information.
Generally this error would be related to the references. Like Fouad's suggestion, you would check whether there are specific references in your test project, and then right click the reference->property, and then set the Copy Local =true.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office App Devlopment: Unable to load one or more of the requested types.

I'm receiving the following error with the default C# Office App for Word, Excel, Powerpoint, Project Task Pane
Error Code
Description
File
Line
Col
Project
1
Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\SharePointTools\Microsoft.VisualStudio.SharePoint.targets
438
5
AppName
I'm using
Microsoft Visual Studio Community 2013
Version 12.0.31101.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02129
Microsoft LightSwitch for Visual Studio 2013
Team Explorer for Visual Studio 2013   06177-004-0444002-02129
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02129
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02129
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02129
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02129
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02129
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Windows Phone SDK 8.0 - ENU   06177-004-0444002-02129
Windows Phone SDK 8.0 - ENU
Application Insights Tools for Visual Studio Package   1.0
Application Insights Tools for Visual Studio
ASP.NET and Web Tools   12.4.51016.0
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Microsoft Azure Websites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Microsoft Azure
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.2.21010.0
For additional information, visit http://www.asp.net/
Common Azure Tools   1.3
Provides common services for use by Azure Mobile Services and Microsoft Azure Tools.
Microsoft Azure Mobile Services Tools   1.3
Microsoft Azure Mobile Services Tools
NuGet Package Manager   2.8.50926.663
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
Office Developer Tools for Visual Studio 2013 ENU   12.0.31105
Microsoft Office Developer Tools for Visual Studio 2013 ENU
PowerShell Tools   1.3
Provides file classification services using PowerShell
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.41012.0
Microsoft SQL Server Data Tools
Windows Phone 8.1 SDK Integration   1.0
This package integrates the tools for the Windows Phone 8.1 SDK into the menus and controls of Visual Studio.
From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
Any help would be much appreciated and also let me know if I can give more info!

Hi mngfinney,
>> From looking at the build it looks like the web part is building correctly but the application isn't passing validation, I have no idea why since it is the default app, I've made Office Apps on previous machines without a problem.
I’m trying to reproduce your issue but failed.
Here is my steps:
#1 Install Microsoft Visual Studio Community 2013
#2 Install Microsoft Office Developer Tools for Visual Studio 2013
#3 Create a new Apps for Office project and rebuild
According your error message, the failed step is ValidatePackage, I suspect it is an environment issue, but I cannot identify the root cause basing on the information you post.
Have you tried to re-install the Visual Studio and Microsoft Office Developer Tools for Visual Studio 2013 or test it on another machine with Microsoft Visual Studio Community 2013?
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi,
I appollogize if this post is off topic. I have problem wiht publish WebApp MVC.
I have website (MVC) with one Web reference. Build and run in VS working. But when I tried to publish to disk I get error:
SGEN: error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
I have VS2013 Profesional with all updates and Windows 8.1.
If I remove web reference then publishing working. Where can be a problem? Thanks.

@Marek Bober,
Thanks for sharing the solution back to here.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creating a request type in OIM 11g R2

Hi All,
I came to know that the request templates have been removed from OIM 11g R2 . I have the below scenario,
1)When an end user logs into Identity console and access his self profile through the 'My Information' link.
2)If he tries to modify some of his attributes(say First Name) the approval policy should not get triggered and should be auto approved and committed to the database
3)For some of the attributes(say Last Name) approval policy has to be triggered and request has to be created and wait for the approval .
4)Now that request templates are removed , Can I create a new request type like 'Modify Custom attributes' similar to 'Modify User Profile' for this scenario to be achieved ?
Please let me know how the above scenario is going to work in OIM 11g R2 ?
Regards,
Senthil.

Hi ,
Thanks for your reply .. I am able to understand the scenario what you are trying to explain .. I tried to do the same ...but in my scenario ,this is the problem that I am facing ..
1)When a user modifies only his First Name then it works fine and gets auto approved .
2)When a user modifies only his Last Name then it works fine and goes for approval and waits till it gets approved.
3)Now the problem is when a user modifies both his First Name and Last Name and submits as a single request , how to handle this ? In this case the First Name should get committed and the Last Name should not get committed .. But he has submitted only a single request .. so how to handle this scenario ?How to divide a single request into two to commit one attribute and not commit another one ?

CF9 Problems with Select * query, resulting in Value can not be converted to requested type.

So, I work on a legacy CF web site and there are numerous SELECT * FROM USERS_TABLE queries all over the site.
Well, we changed the structure of said table in the database on our Testing and Staging sites, with no issues.
When we pushed up to our production environment and changed the structure of the production DB table, the server kept kicking back "Value can not be converted to requested type."
After doing some searching out there, it looks like CF caches the structure of the table, and you either have to restart CF to clear it, or rename and then name-back the DSN to fix the issue.
http://www.bennadel.com/blog/194-ColdFusion-Query-Error-Value-Can-Not-Be-Converted-To-Requ ested-Type.htm
That said, this doesn't happen in our testing and staging environments - so what would be the difference?
Is there some setting I need to change in the CF Admin to keep this from happening again?

Also, if you can use a Stored Procedure to retrieve the data, do so. Standard queries gets all the information, anyway, chokes bandwidth passing it all to the CF server, and forces the CF server to filter, sort, and format the data. SPs tell the db server to get ONLY the data requested, and forces the db server to filter and sort the data, leaving only formatting to the CF server.
That's not true. The only time CF messes with data returned from the DB is if there's a maxrows attribute, and the record set returnded from the DB has more than that number of records... which causes CF to truncate the recordset to the correct size before returning it. The DB might or might not stop sending rows down to CF after CF says "yeah, I've got all I want now".
Other than that, for all intents and purposes all CF does with the SQL is pass it to the DB and wait for an answer. The only thing it does to the returned data is to create a CF record set ("query") with it... this does not involve any filtering and sorting.
Adam

Creating a request based on a new request type

Hi all,
We are trying to create a request for updating the SPM FF ID authorization.
We created a new request type since the path for this WF is different from other paths that we configured.
We based the initiator for this new WF on a new request type called "SPM change FF ID" that holds the actions CHANGE_USER, ASSIGN_ROLES and SUPER_USER_ACCESS (we added the action SUPER_USER_ACCESS because the first stage in the WF is the "SPM Controller" based on the controller that the FF ID has in SPM).
When creating the request we populate the user ID field in the request with the existing FF ID that has a controller defined for it in SPM + we indicate the new roles to assign the FF ID via entering the "select role" functionality.
After pressing the submit button we receive the error "Error creating request. Approver not found".
What are we missing?
Thank you for your help

Shira,
Sorry, just re-read your post. Am I correct in thinking that you want to use the Controllers assigned within SPM to act as the approvers in CUP?
If so, what support pack version are you on as I believe that this only works in SP08 due to a technical bug. This also impacts the SPM Owners acting as approvers.
You may also wish to check the connectors and authorisations of the connector IDs as without being able to read the tables, the approvers may not be found.
Simon
Edited by: Simon P Persin on Nov 16, 2009 4:37 PM

OIM 11g R1 - Request Type Description Customization (Translation)

Hello Experts,
I'd like a little help to know if it is possible to customizate the following:
OIM is using Browser locale to change the language on Web Console.
Does any one know how to change the translation to the Request Type description (the list from where we need to choose) when we are creating a Request?
Example:
Self-Request Resource = Recurso de Auto-Solicitação (in Brasilian Portuguese - we'd like to change it)
Self De-Provision Resource = Autocancelar Provisionamento de Recurso (in Brasilian Portuguese - we'd like to change it)
We work with OIM 11g R1.
Thanks.

Excellent! Thank you very much!
Edited by: 958794 on May 22, 2013 10:37 AM

Provisioning log is not available on Access request type Change Account

Hi,
So I have and issue when I try to submit a request to add a role to a user and I'm trying to understand what could be the reason for it. Basically I have a workflow that works perfectly for a "Change Request". I can see that all the steps are executed and then at the end of the request when is suppose to do the actual role assignment I see the message "Provisioning log is not available" then the approval path is finish and the request is closed but when I take a look at the user in the back end the role is not assign. In terms of access I have try giving SAP_ALL to WF-Batch, nothing shows in Yellow or Red on SLG1 and in SPRO->AC-> User Provisioning -> Define request Type I see "Change Account" with SAP_GRAC_ACCESS_REQUEST. What else can I do to troubleshoot this error?
Note: I when back to the to the AC 10.0 Pre-Implementation From Post-Installation to First Access Request and everythings looks right in terms of the AC Configuration settings.

Hi Jonathan,
In my question I was referring to SPRO - GRC/access control/user provisioning / maintain provisioning settings. Those need to be setup (min. global provisioning settings) in order to have role being assigned to user at the end of path.
Change account option you can see under request type is referring to change user master data(e.g. password/ account validity / details).
Is this system maintain by CUA? If so settings have to be different (see CUA settings in SPRO)
I would recommend moving to SP14 as in SP13 there were many bugs, by the way I believe the worst SP ever since beginning of AC is SP13 (maybe due to number), as it destroys many working functionality.
Filip

RE workflow type is not showing up in the Request type list in AE

Hi,
I had appended the AE_init_append_data_RE.xml file in the Configuration->Initial System Data.
Even after appending this file , the RE workflow type is not showing up in the AE Request type list.
Please guide me.

Hi All,
Thanks for ur inputs. It is working now. I could see all the workflow types after appending the two files
1. AE_init_ append_data_RE.xml
2. AE_init_ append_data_CC.xml
I have created
1. Initator with workflow type RE using Request type and priority -RE_HIGH as attributes
2. CAD by giving webservice URL.
3. Configured workflow with one stage.
Now, if I process a request in RE I am getting an error "ERROR IN CREATING REQUEST". What may be the problem..? I am happy to receive your suggestions.
Thanks

Exchange Rate Date is not Upating for non-catalog request types in iProc

Hi,
The Exchnge rate date is not updating for some non-catalog request types in iprocurement (11.5.10.2 version) and this happening only for some request types only.
can any one help what could be the reason.
Regards,\
Kevin.

Hi Venkat
i suggest you to go thru the dev guide ..... but to answer your question i would say....
**** It looks like "Define Information Template" form only accepts Independent Value Sets and not table based Value Sets (thatinvolve SQL statements).
Well in OAF to display a dropdown list all you need is a query .. so one can write a query to extract the values from a independent value set .... but the same is not possible with table type value set instead you can use the same query used to define the table type value set .
You can create a LOV (one with flash light) even with a independent value set ....
To create a LOV you need a View Object(query which will fetch valid records) and a Public Region (to display)
if you ahve these then you can achive the requirement thru personalization
if the VO and Region are not present then you have to create them .......
Once you are thru the dev guide please go thru the link below which shows adding a lov to an existing page thru personalization....
http://oracle.anilpassi.com/create-lov-based-field-using-personalization-in-oa-framework.html
Thanks
Tom....

What needs to be done to include the leave request type in the work flow

what needs to be done to include the leave request type in the work flow?
the present request for work flow includes the notificationto be sent to the approver
which doesnt include leave request type inthe description
to include this we need to maintain a container variable but what should be the method or abap dic object which has to be used for maintaining this leave request type container

Hi,
You can create and take where you pass leave type and get description of it and create an field in WF containr and fill it than you can use add that field when you are sending notification,.
Atul

SPML request type identification

Similar Messages

Maybe you are looking for