SPNEGO in portal with abap data source + mapping on login & alias id

Hello
I successfully set up the new spnego autentification (with AD) on our EP7 portal.
Spnego module is configured with Mapping mod u201Cprincipal onlyu201D with source u201Clogin idu201D.
SSO is working perfectly for all users with the same u2018sap loginu2019 as the AD login. ( they can use portal to connect on all sap ECC6 server true iview without login& password )
But for user with login name different between AD and SAP , this doesnu2019t work. They have to enter their sap login & password on the portal. So spnego is not working for them.
Such user have different login name between AD et SAP because abap system limit user length to 12 caracters. So I could not change abap username.
And I could not change their AD login name. ( too much impact).
Exemple :
p.nametoolong = 13 character on AD but too long for abap
p.name = 6 ok for abap but different from AD login name.
So if I could not change login id I have to work on user mapping.
The Portal UME use our abab CUA as datasource. So I could not set up user mapping inside the u201Cuser management u201C
A solution could be that Spnego mapping use as source the u201Calias idu201D and not the u201Clogin idu201D.
So I have to set all the u201Calias idu201D. I can do a script for copying in su01 all u201Clogin idu201D to u201Calias idu201D and then edit the u201Calias idu201D of user with a different AD login. ( by the way do you know a tx for that ? )
But this is a little dirtyu2026 is there a simple way to do that ?
it would be perfect if i could do mapping on user id or on alias id if it set. So that i should only manage the alias id user with a AD name different... is that possible ?
thank you !
cdlt
GSV
Edited by: Patrick FABRIES on Oct 4, 2011 12:08 PM
Edited by: Patrick FABRIES on Oct 4, 2011 12:11 PM

Hi Patrick,
Even if you perform this operation, the situation will worsen overtime.
By the way, if you still want to do it, this is pretty simple: call 'BAPI_USER_CHANGE' with the username and pass:
ALIAS = <new alias>
ALIASX = 'X'
Isn't there another attribute that you could use as a pivot: e-mail, maybe?
Best regards,
Guillaume

Similar Messages

64bit CR-Enterprise wont talk with 32bit data source, 32bit IDT wont use 64bit connection for universe. How do I connect them.

Hi.
I installed the full suite of tools as I am involved with a company intended to become a partner and reseller so we are trying to get everything working.
SAP Crystal Server 2013 SP1
BusinessObjects Business Intelligence platform
SAP Crystal Reports for Enterprise
SAP HANA
SAP Crystal Reports 2013 SP1
SAP BusinessObjects Explorer
SAP Crystal Dashboard Design 2013 SP1
Crystal Server 2013 SP1 Client Tools
SAP BusinessObjects Live Office 4.1 SP1
.NET SDK
I found out that BI was needed only after I installed all the others but I installed it without problem.
My issue is that the Information Design Tool (IDT) which creates my universes successfully, and even lets me open and see the dada no problem. Is using a 32bit (ODBC connected to SQL Server 2008) data source.
However, I am unable to load the .UNX in crystal reports (CR) 2011, so I used CR Enterprise (CRE) to connect to my universe. Now when I try to open the universe I start getting the following error:
[Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application
When I do searches online I get very generic information relating to setting up data sources. While I believe the problem is indeed with the data source, I don't believe it is setup wrong.
When I access the universe using the IDT (which uses the 32bit version of the data source to build its connection, it wont let me use a 64bit) I can load a table under the "result objects for query #1" press refresh, I get a list of data.
When I access the same universe using CRE (which "Seems" to use a 64bit data source, but I am not sure), and follow the same process as above. I get the above error.
If I cancel the process, when CRE lists the fields for the report I can later manually map these fields to an ODBC connection. But if I have to do this what is the point of using the universes at all as the end user has full access to all the various DB's available in the data source.
Thanks in advance for any help you can provide.

On the server where Crystal Reports Server is installed, create a 64-bit ODBC connection with the same name as the 32-bit connection. CRS will then automatically use the 64-bit version of the connection.
-Dell

'Select a measure:' stuck on 'Loading...' in Dashboard Designer KPI Dimensional Data Source Mapping

[using SharePoint 2013 Enterprise SP1]
I am trying to create a KPI in Dashboard Designer, but am getting a timeout. I have been doing this for a while on my site; this is not the first. I haven't had this problem before.
I created a new KPI and clicked on the Data Mappings column value, which is a hyperlink, to bring up the Dimensional Data Source Mapping dialog. I switched to a Data Connection in the site I just created (DC works perfectly and can retrieve sample data).
When I click the "Select a measure:" drop-down menu, I get the message "Loading..." and after a while (a minute? two?) a dialog pops up with:
The request took too long to complete. SharePoint is currently unavailable or experiencing heavy traffic. Try again later.
This is a test SP server and I'm the only one on it, so there is no load. Also as mentioned, I am able to verify the Data Connection without problem. I am not having any issue with any of my other few dozen KPIs/Data Connections. Any suggestions as to how
to troubleshoot?

Hi cgtyoder,
According to your description, my understanding is that you got an error when you created a KPI in Dashboard Designer.
Please try to recycle the PerformancePoint Services Application Pool account, compare the result.
Please go to C:\inetpub\wwwroot\wss\VirtualDirectories\the port of web application, adjust the HttpRuntime executionTimeout for the Web Application by modifying the web.config, now PerformancePoint report stability is much better:
<httpRuntime executionTimeout="600" maxRequestLength="51200" />
Note: before you change the web.config file, please make a bakcup for the file.
If this issue still exists, please go to the log file to find more information about this issue.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Query for records on a block with Query Data Source Type : Procedure

Hi All,
The veriosn of form I'm using is:
Forms [32 Bit] Version 6.0.8.23.2
I have a block based on a procedure.
But when I enetr-query and search for records specific to ceratin criteria even then the result of the Query is all records.
Is Query not allowed on a block with Query Data Source Type : Procedure.
Hope my question is clear.
Thanks in advance.
Regards
Arif

When you use a table based block, forms can construct any select with any where clause based on the given inputs. Using a procedure based block, forms cannot "know" which in or out parameter of the procedure corresponds to which item. Even if Forms could pass the value of an item to an argument automagically, the procedure would have to "do something" with the argument, and you´d have to code it.
So, any item that should be used in the where-clause must be mapped to an argument.
Perhaps it would be easier to use a table based block querying a view? For DDL, you could use an instead-of-trigger on the view.
Regards,
Gerd

Oracle BI Apps with SAP data sources

What is the delivered content provided by Oracle BI Apps to map with SAP data sources?
Thank you!

As things stand right now SAP R3 is only supported on a much older release of BI Apps (7.8.4). That release used the Informatica SAP PowerConnect technology to populate the Warehouse.
I posted before on this forum the list of supported SAP Modules.
BI Apps cannot use SAP BW. BW can be a direct data source for BI EE however.
In the near future our support for SAP will be up to date and back on track. There are internal efforts underway that I cannot discuss here in the forum.

Can generic function module extractions possible with CRM data sources.

Hi Friends,
can generic function module extractions possible with CRM data sources.
90% extractions are generic function module extractions.
How is it possible without BW adapters..
It's very urgent ...Please.
Thanks,
Basava Raju

Hi Madhu,
Just curious ... if you already have a generic FM extractor then just go into it and find out where it is reading the data from. If its reading data from the CRM system then thre is no need for any BW adapter ... just in case you need any ABAP help ... post here ... I may be of use to you.
Best regards,
Kazmi

Enterprise Portal authentication disregard data source domain

Our SAP Enterprise Portal supports multiple SAP applications. The portal has two different data sources, i.e. internal (intranet) active directory (IAD) and external (extranet) active directory (EAD). The IAD contains internal users, e.g. employees. But due to internal reasons, the EAD contains the same set of internal users as well as external users, such as bidders / vendors of SRM system. When we tried to make use of both data source, the portal throws an error (user id duplicated) because the same user ID, i.e. an internal user ID, exists in both data source. It seems that the portal does not consider the "domain" of the user account, i.e. "IAD/user1" versus "EAD/user1". Because of this awareness, we are forced to use only the EAD (which is a superset of the two directories) for both internal and external users and activities. The question is why doesn't the enterprise portal take the data source (domain) name into account when authenticating a user?

Jay,
Why have you chosen to use AD as your user data source ? Is it so you can use SPNEGO authentication ?
Thanks,
Tim

11i EBS XML Publisher Report with Multiple Data Source

I need to create XML Publisher report in 11i EBS pulling data from another 10.7 EBS Instance as well as 11i EBS in single report.
I am not allowed to create extract or use db links.
My problem is how to create Data Source Connection using Java Concurrent Program.
The approach I am trying is
1. create Java concurrent program to establish connection to 10.7 instance.
2. Will write the SQL queries in Data Tempalete with 2 Data Source 1 for 11i EBS and 2 for 10.7 EBS
3. Template will show the data from both query in 1 report..
Is there any other way to proceed using datasource API...
thanks

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

CrystalReports error in XI 3.1 with Oracle Data Source

Having trouble running Crystal Reports with Oracle data source off XI 3.1 SP3. Reports hang through CMC or InfoView. Have no trouble on identical environment (presumably) with the same reports. Basically this happened after migration.
Report can be run on designer on the server box (suggesting the connection is good) however once uploaded to CMS, it hangs with error. This is not about an specific report only reports with Oracle Data source (Oracle client already installed and connection established)
Any comments appreciated.

Thank you for your reply.
Seems like a re-boot resolved the problem.
Edited by: Amir Eskandari on Feb 10, 2011 3:57 PM

XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>

<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Adhoc Query Requirement with Multiple Data Source

Hi All,
I have a Adhoc Query Requirement with Multiple Data Source. Is there any way to achive it. Other than Resultant set and bring into Model.
Thanks
SS

You can compare stuff in the EL, but I don't think this is what you need.
You can just use Java code in the backing bean class for all the business logic. You can use DAO classes for database access logic. Finally for displaying you can use the JSF tags such as h:outputText.

Using ConnBean and CursorBean with a Data Source

Hi all,
I',m making a web app. using the Jdev (RUP4) with OA Extension. I looked in the help menu under "About Data-Access JavaBeans and Tags". Here I found the following example, but for some stange reason I cannot get the setProperty to work.
Example: Using ConnBean and CursorBean with a Data Source This following is a sample JSP page that uses ConnBean with a data source to open a connection, then uses CursorBean to execute a query.
<%@ page import="java.sql.*, oracle.jsp.dbutil.*" %>
<jsp:useBean id="cbean" class="oracle.jsp.dbutil.ConnBean" scope="session">
<jsp:setProperty name="cbean" property="dataSource"
value="<%=request.getParameter("datasource")%>"/>
</jsp:useBean>
<% try {
cbean.connect();
String sql="SELECT ename, sal FROM scott.emp ORDER BY ename";
CursorBean cb = cbean.getCursorBean (CursorBean.PREP_STMT, sql);
out.println(cb.getResultAsHTMLTable());
cb.close();
cbean.close();
} catch (SQLException e) {
out.println("<P>" + "There was an error doing the query:");
out.println("<PRE>" + e + "</PRE>\n<P>"); }
%>
Does anyone know how to set the "Property" to a datasource and make it work?
Best regards,
MHCI

There is no point-and-click (Import Data Source Metadata) way to use an LDAP server as a datasource. You have to use the Java Function provided on dev2dev. If you need help with it, please post here.
- Mike

DATACOPY with partitioned data source

Hello,
I am actually working on the Hyperion Essbase EPM 11.1.2
I am trying to perform a Datacopy command in a HBR.
Data source are partitioned with a transparent partition.
This datacopy do not work. The HBR is really fast but when I retrieve data no data are copied.
I am wondering if this is possible to perform a datacopy command, in a HBR with partitioned data source.
I have managed to perform this datacopy throw a HBR using the command:
SET CREATEBLOCKONEQ
Target = Source;
But this method is really long.
Thanks for your answer,
Arthur.

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Obiee with unstructured data source

Hi,
How to work with Unstructured data sources using OBIEE 11g?Anybody any idea?examples would really help.
Is it also available in 10g also?
Please Help.
Regards,
Krish

Hi Krish,
It's actually possible to use OBIEE with unstructured data.
Even if you don't have real FK relations in your database and a proper model, OBIEE can create queries if you tell him where to find the joins and how they are defined.
The Idea is to create you FK in the physical layer and try to have a 3FN schema (star schema with Dimension and Fact) as much as possbile in your Business layer.
A very nice presentation is available on Mark Rittman webite:
http://www.rittmanmead.com/files/3_Complex_Modeling_with_OBIEE_Elio_Idema.pdf
Hope it will help you to start.
Regards
PS: Please don't forget to close the thread and assign points when your question is answerd

Error in viewing data in a data template with multiple data sources

Hello,
I have designed a data template with two data sources.One is from DEPARTMENTS table and the other datasource is a xml file.Following is the code for the data template :
<dataTemplate name="EmployeeListing" dataSourceRef="demo">
<parameters>
<parameter name="p_DEPTNO" dataType="character" defaultValue="20"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[SELECT DEPARTMENT_NAME,DEPARTMENT_ID,LOC from DEPARTMENTS]]>
</sqlStatement>
<xml name="empxml" expressionPath=".//ROW[DEPARTMENT_NAME =$DEPARTMENT_NAME]">
<url method="GET" realm="" username="" password="">file:///D:\OraHome_1\xmlp\XMLP\DemoFiles\Employee Salary Report.xml</url>
</xml>
/dataQuery>
</dataTemplate>
The problem is when i am trying to view the data, only data from SQL Query Q1 is getting displayed and the data from Employee xml is not at all getting displayed.
Could anyone please let me know what i am missing?
Thanks
Nutan
Edited by: user609971 on Oct 23, 2008 8:06 AM

This is from Documenation sample....
Did you see the data structure section, where you say, how you wanted the columns ?
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="Employee Listing" description="List of Employees" v
ersion="1.0">
<parameters>- Defines a single parameter for the Department Number
- with default of 20:
<parameter name="p_DEPTNO" dataType="character"
defaultValue="20"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[SELECT DEPTNO,DNAME,LOC from dept
                  order by deptno]]>
</sqlStatement>
<xml name="empxml" expressionPath=".//ROW[DEPTNO=$DEPTNO]"> - Defines name
- and link to DEPTNO in Q1
<url method="GET" realm="" username="" password="">
file:///d:/dttest/employee.xml</url> - Defines url for xml data
</xml>
</dataQuery>-
<dataStructure>- The following section specifies the XML hierarchy
- for the returning data:
<group name="G_DEPT" source="Q1"
<element name="DEPT_NUMBER" value="DEPTNO" />
<element name="DEPT_NAME" value="DNAME"/>
- This creates a summary total at the department level based
- on the salaries at the employee level for each department:
<element name="DEPTSAL" value="G_EMP.SALARY"
function="SUM()"/>
          <element name="LOCATION" value="LOC" />
<group name="G_EMP" source="empxml">
<element name="EMPLOYEE_NUMBER" value="EMPNO" />
<element name="NAME" value="ENAME"/>
<element name="JOB" value="JOB" />
<element name="MANAGER" value="MGR"/>
<element name= "HIREDATE" value="HIREDATE"/>
<element name="SALARY" value="SAL"/>
</group>
</group>
</dataStructure>
</dataTemplate>

SPNEGO in portal with abap data source + mapping on login & alias id

Similar Messages

Maybe you are looking for