Spoken feedback doesn't work in walk function 6th generation iPod nano?

Spoken feedback function doesn't work in the Nike+ fitness walk function on 6th generation iPod nano? It's only in working in the running mode?!

Hi, babafromusa.
You may find this article helpful with troubleshooting this issue. 
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
If the issue persists, see the section labeled Issue not resolved.
Cheers,
Jason H.  

Similar Messages

  • 6th Generation iPod Nano Not Working

    So I purchased a 6th iPod nano just last month and had it sent to me via mail. I took it out of the packaging and had turned it on and charged it and it seemed to work so I threw away the packaging and receipt.
    However, I just tried putting music on it yesterday, and it will not work. I bought all of the music from iTunes and its in my library and the music works fine there, but then when I unplug my iPod, half of the time it says that I haven't synced it and there's no music on it, and the other half of the time the music is there, but the cover art is contorted and it will play one or two seconds of the song and then skip to the next.
    I tried messing with it for an hour and a half and its still doing this. Is there anything I can do in this situation? I'm extremely displeased and I need my iPod for a lengthy plane ride I'm going on.

    Hi aseda26,
    Are you using the latest version of iTunes? Have you tried resetting your iPod to factory settings? You can find directions to do this at the link below. This usually helps clear up any software bugs you might be having.
    http://support.apple.com/kb/HT1339
    If it still isn't working and you purchased it less than 30 days ago, I would encourage you to bring it back to your local Best Buy store so we can try to troubleshoot and exchange it for you if necessary.
    Cheers,
    Douglas|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Itunes does not recognize my 6th generation ipod nano.  I installed, unintalled the progam...can't get it to work. any suggestions?

    can't get my itunes to recognize my 6th generation nano.  I have installed/uninstalled.  Restarted and I can't get it to work.  Any suggestions?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.

  • Nothing works to get my 7th generation ipod nano! I've tried the on/off button and it didn't work!

    My ipod nano 7 generation won't turn on and wasn't recognized by Itunes on my computer. I tried holding the on/off button for six seconds but it didn't work! Help!

    Not only the on/off button. Press and hold it together with home button. Cheers!

  • Why is my left audio output not working, when I have brand new headphones? (6th Generation Ipod Nano)

    I have recently been having problems with my Ipods audio output... The Left headphone puts out No sound at all... I am positive it is not my headphones... Any solutions or is it a harware problem??
    Hope to hear Back ASAP thanks

    iPod Nano Touch? (I must have missed the announcement of that model of iPod!)
    Regardless of which model of iPod you have (and if it's a Nano, why submit your question to the Touch forum?), some car charging devices charged iPods via the firewire line, which was fine for the first iPods on the market. Some later iPods charged by firewire or USB. New iPods do not have firewire and cannot be charged by firewire. They only charge by USB
    So perhaps your old iPod (again, whichever model it is) charged by fireware.

  • Why doesn't my fifth generation ipod nano work with my Toyota Yaris?

    Hello – The charging feature on my new fifth generation ipod nano doesn’t work with the factory glove compartment adapter that came with my 2008 Toyota Yaris. It plays music, etc but does not charge the ipod when connected.
    My third generation nano charged perfectly with my yaris until it was run over and crushed recently. My nano gen 5 replacement doesn’t work the same with my Yaris. Can anyone help?
    Steve
    [email protected]

    I cannot say for sure, I don't know anything about the toyota yaris. However, if that system was built to work with older firewire based iPods, then it will not charge new USB based units. There are converters out there you can get do deal with this.
    http://www.scosche.com/products/productID/1667
    i

  • IOS 5 Safari Reader mode doesn't work on an iPad 1º generation

    iOS 5 Safari Reader mode doesn't work on an iPad 1º generation. How can I fix that?

    Hi.  I am having the same problem on an original iPad. The tabbed browsing works fine, but no "reader" button is showing up in the URL window at the top...
    Anyone else seeing this and is a reinstall of ios5 really needed?
    Thanks

  • My 4th generation ipod nano backlight no longer working. Any suggestions

    My 4th or 5th generation ipod nano backlight is no longer working.  Any suggestions?

    Hi grecokev,
    Thank you for contributing to the Apple Support Communities.
    You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
    Turn off your computer and your iOS device or iPod, then turn them on again.
    Check to make sure that you've installed all required updates for your computer.
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    You can find these steps in this troubleshooting article:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
    Best Regards,
    Jeremy

  • Built-in microphone only works when phone is connected to iPod nano cable

    Hi, I got an iPhone yesterday but the microphone doesn't work properly. I have figured out that the built-in microphone will only work when I connect the dock cable from a second generation iPod nano. The cable that comes with the iPhone does not work. The supplied handsfree earbuds work correctly at all times.
    The strangest part of the problem is that the iPod dock cable doesn't have to be connected to my computer!
    I'll state the problem again. Let's say I make a phone call. The person on the other end cannot hear anything I say, but I can hear them. Then I plug in the dock cable from a second generation iPod nano, and the other person can then hear me. Unplug the cable and they can not hear me.
    I have tried restoring the iPhone three times, turned it on and off, and inserted and removed the headphone plug many times. These actions do nothing. *The only way I can talk on my phone is if I insert the dock connector from my old iPod!*

    Take it back.....

  • I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    MAJOR DEFICIENCY = WASTED MONEY:
    I love the 6th Gen. iPod Nano but it has a major deficiency, the power button. I've bought 2 and they both have given me the same issue of the power button becoming slack and not functioning. Why is this so, and how can I fix it??

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • 1st generation ipod nano's shuffle feature stoped working

    my 1st generation ipod nano has a shuffle feature, but now it doesnt work. when i turn on the shuffle feature and try to play all songs it only plays the one song you select to be the first song in the shuffle order. when i pick a list of songs it only plays the first song and says in the top corner: song "1 of 1" as if there were no other songs. please help me or else im getting rid of my ipod and not using apple technology ever again.
    Message was edited by: badrubberpiggy25

    good luck with that

  • I have a 3rd generation ipod nano. I upgraded to lion. I tried to buy an audio book and download it to my nano like I have done at least 50 times before. Now the dialog box states that I need an ipod touch for the same function. MacBook Pro 2008 w/ m.trac

    I have a 3rd generation ipod nano. I recently upgraded to Lion which is causing lots of issues. Aside from that, I went to the Itunes store to purchase books like I have done at least 100 times before with no problems. Now I can by the book and get it to my computer, however when I tried to download the book to my 3rd generation ipod the dialog box informed me that to download any new audiobook purchases I would need an ipod touch. My ipod nano 3rd generation serves my purposes just fine. Why should I be forced to buy something I do not want just to continue something I have always done seamlessly? I know this is more of a rant than a question but I am sure someone else out there has had this happen to them. Maybe you could share your thoughts on how to work around this issue if possible?

    I forgot to add the last obvious and crucial step I had taken - plugging a different iPod into my system. It was also not recognized. That was the final proof I needed to determine if the problem was device or system. But now what?
    I truly appreciate any help I can get!
    Thanks again...

  • My 6th generation Ipod Classic will not eject, works fine otherwise and properly goes thru sync cycle.  A message shows files are in use and device can't be ejected.  If I close my internet browser it will eject properly every time.

      I have a new HP Pavilion running Windows 7 with lots of memory and a terabyte of storage, using iTunes 11 with a 6th generation Ipod Classic.  Have used my current iPod for years with no problem until today; when I try to eject the device iTunes stops responding, there is a delay of about 10-15 seconds until a message box pops up: "the ipod cannot be ejected as there are files in use."  It also won't eject from the windows taskbar, same type of message appears. iTunes remains unresponsive until I click "ok" on the message box. I've reset the ipod twice and disabled the "enable disk use" button for the ipod -- with no change in symptom.
      I am not certain as to the fix but am 100% sure that the problem does not occur if I close my open browser; it occurs only when I have an Internet browser open.  I experimented with Google Chrome that I normally use, and also with Internet Explorer -- when either browser is being used the ipod cannot be ejected.
      I've used iTunes 11 for about 3-4 weeks and this problem had not occurred until today.

    I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

  • 6th gen ipod nano not recognized by itunes on my PC (Windows 7). tried everything to fix, but still not working... please help

    I have a 6th gen ipod nano that is not recognized by itunes on my PC (Windows 7). I get an error that it 'could not be identified properly'. I have tried all tips on the apple site to correct the problem, including unistalling and reinstalling itunes twice. Nothing works. Has anyone tried something that worked that is not part of the Apple support page (http://support.apple.com/kb/TS3218)? Thank you in advance for any help!

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • Does anyone know why my music won't play on my 7th generation iPod nano? I tried resetting it already and that didn't work. Can someone please help?

    Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.

    I would to a Restore.  Select the iPod in iTunes.  Go to the Summary tab for the iPod.  There is a button there to do a Restore.  This will erase the iPod, re-install its software, and set it to default settings.  After Restore complete, try playing songs on the iPod again.
    If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod.  All 7th gen nanos are still under warranty.  If you have an Apple Store nearby, you should take it to the store's Genius Bar.  To minimize waiting, you can make a reservation on store's web page.
    http://www.apple.com/retail/

Maybe you are looking for

  • Ical reminder list

    I know maybe someone talk about this before , but im realy disappointed all what i put in my reminder app go to completed list and its not sorted under certain reminder list and i was using calnder to view what i have done and when so i can make my r

  • Itunes store access causes itunes to be not responding?

    This is pretty strange -- at my home all this works fine -- I select itunes store and I can navigate and select things and even run diagnostics and everything works fine. At my office (where I have network control) when I click on the itunes store, t

  • Leave balance inconsistent in ESS Portal

    Goodday all, I'm stuck here. We are currently on r/3 4.7 and using ESS (ITS Version) via Portal. Recently, we are having problem with one of our leave type. The leave type is not showing the correct balance in ESS leave request. I've checked the abse

  • Error from Console -/sudo writable by non-owner (041775)

    I'm consistentlyu getting the following, which appears to be an error, whenever I open a console session: -sudo: /var/db/sudo writable by non-owner (041775), should be mode 0700 I'm not sure what this means or how to fix it.  I'm concerned about Admi

  • Why do some Answered topics have no reply shown as Answered!

    Why are many topics shown with a green star but there is no reply within the topic which is indicated as solving it?