Spontaneously I am unable to access my network. Perhaps Apple believes it would be a swell idea to change my password without my knowing it? Any thoughts as to why or how this would happen?
Any thoughts as to how or why my network password would have been spontaneously changed? I am confused and cannot seem to figure this out.
Do othere device now connect to the network?
Try powering off and then back on the router.
Go to System Preferences>Network and creae a new location and try again
Similar Messages
-
Ok, I've had this problem for quite a while now
There's this 1 site that I cannot access on my computer it says "Unable to access the network Google Chrome is having trouble accessing the network." However I can access the site on my laptop, I don't see how I can fix the problem!?Bradley750 wrote:
Ok, I've had this problem for quite a while now
There's this 1 site that I cannot access on my computer it says "Unable to access the network Google Chrome is having trouble accessing the network." However I can access the site on my laptop, I don't see how I can fix the problem!?
Hi. Welcome to the forums.
Can you give a little more information, mainly the site you're havging problems with.
Have you tried a different browser ? What OS ?
There are a wide variety of reasons, security products interferring, hosts file problems, browser issues etc.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures -
On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...
The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar. -
Unable to access Verizon network!
Unable to access Verizon network! Got pop up window that "you've reached your mobile data usage limit. Mobile data turned off. " I have option to click re-enable button but doing so may result in additional charges. I've check settings, my mobile data box is checked. When I try to open a web page it tells me I'm off line with message "Wi-Fi and mobile data are turned off. The page can be loaded once you connect to a network. Error code: ERR_INTERNET_DISCONNECTED" My wi-fi DOES work, it's the Verizon network that I cannot access. Someone PLEASE HELP.
Check the graph in your Data Usage section; it sounds like you've enabled the Alert About Data Usage feature, have reached that limit, and the phone is now restricting your data usage accordingly. For more info., see:
How do I monitor online data usage on my Samsung Galaxy S5? | Support | SAMSUNG UK -
Suddenly, time machine is very slow. Used to take up a minute and now more than half an hour. Does anybody know how this can happen? Indexing the back-up disk is off, but Timde Machine keeps on indexing!
same issue here...
-
Recently updated Numbers to Version 3.5.2 and now also seem to have Numbers Version 2.0 on my launchpad? Can anyone explain how this has happened - how do I get rid of it? Not able to move to Trash.
What is strange however is that my iMac is only a few months old and they all were upgraded to V3.x just a few months ago - with all Apps for iWork removed at that time.
Unless you did something specific to remove the old versions of the iWork apps (not advisable) then, as Wayne points out, they were not actually removed from your Mac, just moved into that subfolder within your main Applications folder.
I originally downloaded Numbers 2.x from the App Store (i.e. didn't install from a disk). I still have it on my Mac. But only Numbers 3.x appears in Launchpad.
I don't know whether this will help, but in Mac App Store you might try clicking 'Account' under 'Quick Links' on the right, signing in with your password, and clicking the 'Reset' button to the right of 'Reset all warnings for buying and downloading'. Sometimes the App Store gets a little confused. It's possible Launchpad may be taking its cue from the App Store in showing that old version of Numbers.
By Launchpad I assume you really mean Launchpad, not the Dock. I usually use the Dock. If that's what you're using too, then of course you can just drag the icon for the old Numbers off the Dock and it will vanish. (But the Numbers 2.3 application will still be there in that subfolder when you need it.)
SG -
My network symbol keeps working on my home page even when I'm not doing anything, I know there has been problems in the past with this so has it come back, help it's killing my battery!
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
All notes on 4S gone. Any idea how this could happen? Have never synced notes. They are just gone.
All notes on 4S gone. Any idea how this could happen? Have never synced notes. They are just gone.
Well, I know in iOS 5 they can be linked to e-mail accounts, not sure if you had that setup or not.
For future reference, use a program like Evernote, amazing and free, plus dedicated PC apps if you want to view notes on your computer. -
My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.
Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
Is there any documentation which throws light on how data aggregation happens in data warehouse grooming? what algorithm exactly it follows in different aggregation type (raw, hourly, daily)?
How exactly it picks up a specific data value during Hourly aggregations and Daily aggregations?As in How the value is chosen. Does it say averages out or simply picks value at the start of the hour/day or end of the hour/day ??I'll try one more time. :)
Views in the operations console are derived from data in the operational database. This is always raw data, and typically does not go back more than 7 days.
Reports get data from the data warehouse. Unless you create a custom report that uses raw data, you will never see raw data in a report - Microsoft and probably all 3rd party vendors do not develop reports that fetch raw data.
Reports use aggregated data - hourly and daily. The data is aggregated by min, max, and avg sample for that particular aggregation. If it's hourly data, then you will see the min, max, and avg for that entire hour. Same goes for daily - you will see the
min, max, and avg data sample for that entire day.
And to try clarifying even more, the values you see plotted on the report are avg samples. If you drill into the performance detail report, then you can see the min, max, and avg samples, as well as standard deviation (which is calculated based on these
three values).
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
I would like to ask whether anyone knows of any true explanation for why the iPhone 5 starts at $199 in the US and £529 in the UK? That is more than a £400 discrepancy...
iPhones are duty free and even with a $50 shipping fee it would only come to £185.75 including VAT at the current exchange rate.How much a month is the standard 24month contract with AT&T or one of the other American providers that makes the handset cost $199?
Here's the cheapest plans available from the big three:
The plans start there and can run up to $230/mo (for AT&T). -
changed the password on my 4s and now i'm locked out, how can i change my password without accessing my phone?
just so you all don't think i can't read i tried restoring my phone but it is telling me that it can't restore the phone because it is locked. i'm not entirely sure how i entered a password in twice incorrectly, but go figure. does anyone have anyother ideas other than restoring it?
-
Unable to access internal networks over Remote acces VPN
Hi,
I have set up a Remote access VPN from Home to Cisco ASA 5512-X.
I am able to connect successfully and even getting a valid IP address from VPN pool 172.21.3.1-. However I am unable to access any of the internal resources.
Internal Network: 172.20.0.0 255.255.0.0
Please if someone can help identifying the issue.
Below is the running config:-
Result of the command: "sh run"
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name M8fl.com
enable password Aoz9GlxLLvkWrTUy encrypted
passwd Gc1jA6zbgOsj63RW encrypted
names
ip local pool vpnclients 172.21.3.1-172.21.3.20 mask 255.255.0.0
ip local pool test 172.21.3.21-172.21.3.40 mask 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 172.20.254.250 255.255.0.0
interface GigabitEthernet0/2
description vodafone 100mb internet 195.11.180.40_29
speed 100
duplex full
nameif outside1
security-level 1
ip address 195.11.180.42 255.255.255.248
interface GigabitEthernet0/3
description Voice
nameif Voice
security-level 80
ip address 192.168.2.1 255.255.255.252
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa911-smp-k8.bin
ftp mode passive
clock timezone GMT 0
dns domain-lookup inside
dns domain-lookup outside1
dns domain-lookup management
dns server-group DefaultDNS
name-server 10.0.0.4
name-server 172.20.0.100
domain-name M8fl.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network VLAN1
subnet 172.20.0.0 255.255.0.0
object network NETWORK_OBJ_172.20.3.0_27
subnet 172.21.3.0 255.255.255.224
object network Voice_Net
subnet 172.21.20.0 255.255.255.0
object network PBX_Internal
host 192.168.2.2
description PBX Internal
object network Voice_External
host 195.11.180.43
description For PBX
object network Raith_Remote_Network
subnet 192.168.20.0 255.255.255.0
description Raith Remote Network
object network NETWORK_OBJ_172.21.3.0_27
subnet 172.21.3.0 255.255.255.224
object network NETWORK_OBJ_172.21.3.0_26
subnet 172.21.3.0 255.255.255.192
object-group network azure-networks
network-object 10.0.0.0 255.0.0.0
object-group network onprem-networks
network-object 172.20.0.0 255.255.0.0
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service test_PPTP
service-object ip
service-object tcp destination eq pptp
access-list azure-vpn-acl extended permit ip object-group onprem-networks object-group azure-networks
access-list outside_access_in extended permit ip object-group azure-networks object-group onprem-networks
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any any log disable
access-list inside_access_in_1 extended permit ip object-group onprem-networks object-group azure-networks
access-list inside_access_in_1 extended permit ip any object Voice_Net log debugging
access-list inside_access_in_1 extended permit ip any any
access-list outside_access_in_1 extended permit ip object-group azure-networks object-group onprem-networks
access-list outside_access_in_1 extended permit icmp any any
access-list outside_access_in_1 extended permit ip any any inactive
access-list Voice_access_in extended permit ip any any log debugging
access-list outside_cryptomap extended permit ip object-group onprem-networks object Raith_Remote_Network
pager lines 24
logging enable
logging buffer-size 40000
logging buffered notifications
logging asdm debugging
mtu outside 1500
mtu inside 1500
mtu outside1 1500
mtu Voice 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-66114.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside1) source static onprem-networks onprem-networks destination static azure-networks azure-networks
nat (inside,outside1) source dynamic VLAN1 interface
nat (inside,Voice) source static VLAN1 VLAN1 destination static Voice_Net Voice_Net no-proxy-arp route-lookup
nat (Voice,outside1) source static PBX_Internal Voice_External
nat (inside,outside) source static onprem-networks onprem-networks destination static Raith_Remote_Network Raith_Remote_Network no-proxy-arp route-lookup
nat (inside,outside1) source static any any destination static NETWORK_OBJ_172.21.3.0_27 NETWORK_OBJ_172.21.3.0_27 no-proxy-arp route-lookup
nat (inside,outside1) source static any any destination static NETWORK_OBJ_172.21.3.0_26 NETWORK_OBJ_172.21.3.0_26 no-proxy-arp route-lookup
access-group outside_access_in in interface outside
access-group inside_access_in_1 in interface inside
access-group outside_access_in_1 in interface outside1
access-group Voice_access_in in interface Voice
route outside1 0.0.0.0 0.0.0.0 195.11.180.41 10
route inside 172.21.20.0 255.255.255.0 172.20.20.253 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable 444
http 192.168.1.0 255.255.255.0 management
http 172.20.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
sysopt connection tcpmss 1350
sysopt noproxyarp outside
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set azure-ipsec-proposal-set esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association lifetime seconds 3600
crypto ipsec security-association lifetime kilobytes 102400000
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-3DES-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime kilobytes 4608000
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
subject-name CN=ASA
crl configure
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 28800
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 enable outside1
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 28800
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 172.20.0.0 255.255.0.0 inside
telnet timeout 5
ssh 172.20.0.0 255.255.0.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd address 172.20.2.1-172.20.2.254 inside
dhcpd dns 10.0.0.4 172.20.0.100 interface inside
dhcpd enable inside
dhcpd dns 172.21.20.254 interface Voice
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
tftp-server inside 172.20.2.34 /tftp
webvpn
enable outside1
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
anyconnect enable
tunnel-group-list enable
internal-password enable
group-policy DefaultRAGroup_2 internal
group-policy DefaultRAGroup_2 attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol l2tp-ipsec
default-domain value
group-policy DefaultRAGroup_3 internal
group-policy DefaultRAGroup_3 attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol ikev1 l2tp-ipsec
default-domain value
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol l2tp-ipsec
default-domain value
group-policy DefaultRAGroup_1 internal
group-policy DefaultRAGroup_1 attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol l2tp-ipsec
default-domain value
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client ssl-clientless
group-policy RA_VPN internal
group-policy RA_VPN attributes
dns-server value 8.8.8.8 4.2.2.2
vpn-tunnel-protocol ikev1
default-domain value
group-policy "GroupPolicy_Anyconnect _profile" internal
group-policy "GroupPolicy_Anyconnect _profile" attributes
wins-server none
dns-server value 8.8.8.8
vpn-tunnel-protocol ssl-client ssl-clientless
default-domain none
webvpn
file-browsing enable
group-policy GroupPolicy_89.241.208.14 internal
group-policy GroupPolicy_89.241.208.14 attributes
vpn-tunnel-protocol ikev1
username test2 password encrypted privilege 15
username test1 password nt-encrypted privilege 0
username test1 attributes
vpn-group-policy DefaultRAGroup_2
username test password encrypted privilege 15
username test attributes
vpn-group-policy DefaultRAGroup_1
username EdwardM password encrypted privilege 15
username vpntest password encrypted privilege 0
username vpntest attributes
vpn-group-policy RA_VPN
username vpntest3 password nt-encrypted privilege 15
username vpntest3 attributes
service-type remote-access
username rhunton password encrypted privilege 15
username rhunton attributes
service-type admin
username e.melaugh password encrypted privilege 15
username netx password encrypted privilege 15
username netx attributes
service-type remote-access
username colin password encrypted privilege 15
username colin attributes
service-type remote-access
tunnel-group DefaultL2LGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup general-attributes
address-pool vpnclients
default-group-policy DefaultRAGroup_3
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
isakmp keepalive disable
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
tunnel-group "Anyconnect _profile" type remote-access
tunnel-group "Anyconnect _profile" general-attributes
address-pool vpnclients
default-group-policy "GroupPolicy_Anyconnect _profile"
tunnel-group "Anyconnect _profile" webvpn-attributes
group-alias "Anyconnect _profile" enable
tunnel-group 137.117.215.177 type ipsec-l2l
tunnel-group 137.117.215.177 ipsec-attributes
ikev1 pre-shared-key *****
peer-id-validate nocheck
isakmp keepalive disable
tunnel-group 89.241.208.14 type ipsec-l2l
tunnel-group 89.241.208.14 general-attributes
default-group-policy GroupPolicy_89.241.208.14
tunnel-group 89.241.208.14 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect pptp
policy-map type inspect ipsec-pass-thru Fairhurst
description to allow vpn to fairhurst network
parameters
esp
ah
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f4185106b309478da7804dc22d2c1a85
: endHi,
You seem to have this nat (inside,outside1) source dynamic VLAN1 interface at line 2 which is causing the identity Nat/ Nat exempt to fail.
It is always good to use the packet tracer feature on the ASA to see what exactly is happening.
Try this
nat (inside,outside1) 1 source static VLAN1 VLAN1 destination static NETWORK_OBJ_172.21.3.0_27 NETWORK_OBJ_172.21.3.0_27 no-pr route-lo
Let me know how it goes for you.
Regards,
Nitish Emmanuel -
Unable to access mapped network drive, DFS
TL;DR: Unable to map a network drive on one particular computer, except if circumventing DFS.
OK - So I have exhausted all my options in this matter, so all suggestions are welcome.
Keep in mind the file system is DFS.
1. User has been set up the same as our other users in Active Directory.
2. Most network drives are connected via GPO. They are mapped via\\company.local\common\
3. The users' home folder is connected via setting in AD -> Profile -> Home folder ->
Connect X: To \\company.local\homedir\username
4. When the user logs on, all network drives defined in GPO are mapped OK, but the X: which is defined via "Home folder" in AD, is not connected. When trying to map it manually, we get "Access denied".
5. If the user tries the complete path via Explorer: \\company.local\homedir\username - Error 0x80004005 Unspecified error occurs. We have googled this particular code but found nothing that applies to us.
6. If the user tries the complete path to the folder on the actual file server, circumventing DFS, the home folder is mapped OK.
Strange thing is: This only happens on this particular computer. If users logs on to another computer, in the same domain, receiving the same GPO etc. The X: is mapped fine via \\company.local\homedir\username
Also if another user logs on to the problematic computer they also cannot access their X: on \\company.local\homedir\username
So we tried updating the WLAN/LAN drivers to no avail. Might there be any settings on the network adapters that might cause this?
KthxbaiIf other computer has the same policy ("Send NTLMv2 response only. Refuse LM"), it should not be the cause.
I agree that all clients should have the same Group Policy but sometimes the group policy may not be applied correctly on a client which causes issues. Thus you can try a "gpupdate /force" and see if issue persists.
Also you can test to access \\company.local to see if it will success. Try \\rootserver as well if it is different as DFS folder target.
As the issue only occurs on a specific client, maybe we can have a try with re-join domain.
If you have any feedback on our support, please send to [email protected] -
This problem began when I typed in an address http www etc., making one mistake in the address. I corrected it and then tried to copy the address because it was long (I wanted to be able to acces it another time), and that's when the trouble starrted. I just copt documents to get a new one because it's quicker, but it is unorthodox, I know. Since then whenever I copy a document i cannot open it, and it often puts a gobledegook ending to the document name. I've started emailing texts to myself so as to keep them, but I MUST be able to use documents normally. I hava a MacBook Pro, using OS Mountain Lion 10.8.5. I don't like it. It's fairly new, and has messed up my system of documents : the size is alll wrong and the tabulations are worse than ever. I use text edit because I wanted to use Macdictate because I am handicapped (arthritis and firbomyalgia) but I have never been able to get it to work. Since I changed OS I cannot use Text edit properly any more. Please help me. I think it must be a bug that came through when I was putting this address in four days ago. I went to the site once I'd corrected the address and it was perfectly normal. I shall ring them today and ask them if this has happened to anyone else. I live in France. Thank you for your advice. Because I am handicapped and I do not dirve, it is very difficult to get to a Mac store. I deleted Mac cloud documents because I don't want to use it and I thought it might solve the problem, but it didn"t.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
Maybe you are looking for
-
Dear All, I'm working on a review of the SAP HR Portal we use, but I'm newbie to SAP. and need your expert's opinion on the following questions. - Can I use some Bapi or RFC calls or some other tech from the JSP pages to create position SAP backend?
-
Why is my drag and drop not working
I have Mac OS X 10.5.8 and my copy paste has quit working as well as my drag and drop. Any help would be much appreciatd.
-
How to sync local files to exchange
Okay - so I made the move in my office to all Mac - accessing our exchange server. All of my files are local - simple question: 1 - How can I have my local files (documents) automattically sync with an identical folder on the exchange server? This
-
is it possible to install the creative suite CS6 full version (not the creative cloud) on imac version 10.10.1?
-
Replace command by CTL dynamically or load custom bitmap in command
I am searching for customizing my booleans during VI execution. Is there a way to: - replace a command by an existing CTL (like right-click on my boolean > replace > select a command) during VI execution ? or - load dynamically some PNG or JPEG into