Spoof Attacks by my own computer?

Hi all,
My wireless router (d-link di-624) is getting spoofed and it completely kills my internet connection. This happens every few days or so.
When I check the router logs, I see this:
Spoof Attack fromd MAC(00-11-24-BD-73-4C) Detect,
May/18/2006 13:36:02 Target IP(224.0.0.251), Target Port(5353) Packet Dropped
May/18/2006 13:36:02 Spoof IP(169.254.75.149), Spoof Port(5353)
May/18/2006 13:36:02 Spoof Attack fromd MAC(00-11-24-BD-73-4C) Detect,
May/18/2006 13:36:01 Target IP(224.0.0.251), Target Port(5353) Packet Dropped
May/18/2006 13:36:01 Spoof IP(169.254.75.149), Spoof Port(5353)
May/18/2006 13:36:01 Spoof Attack fromd MAC(00-11-24-BD-73-4C) Detect,
May/18/2006 13:36:01 Target IP(224.0.0.251), Target Port(5353) Packet Dropped
May/18/2006 13:36:01 Spoof IP(169.254.75.149), Spoof Port(5353)
The MAC hardware address points to my wireless network care for my iMac. I'm running the latest version of Tiger.
Any ideas? Is someone doing this to me?
thanks,
Rich

I had the same problem.
It seems like a DLink DI-624 / OS X compatibility bug. My mac did get the the correct IP.
# ifconfig -a
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::230:65ff:feb9:1048 prefixlen 64 scopeid 0x4
inet 192.168.127.103 netmask 0xffffff00 broadcast 192.168.127.255
ether 00:30:65:b9:10:48
media: autoselect (100baseTX <full-duplex>) status: active
DI-624 Log
Jun/06/2006 19:27:55 DHCP lease IP 192.168.127.103 to 63-64-30-32-31-33
Dynamic DHCP Client List
Host Name IP Address MAC Address Expired Time
192.168.127.103 63643032313337353630322D31 Jun/13/2006 16:49:01
As you see the DLink DI-624 seems to have a different MAC addres than the one OS X is reporting for en0!!?
Mac OS X (10.4.6)

Similar Messages

I have my iphone 5 set up with Itunes on one computer, but I recently just bought my own computer. How do I set up my Iphone with the new Itunes account? Its telling me it can only be set up with one account. Do I have to delete the other account?

i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account? It says my phone can only be set up woth one itunes account. How do I remove the previous account?

ThisGal_Drea wrote:
i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account?
Do you mean iTunes library?
iTunes account is what you use to make iTunes purcahses.
iTunes library is what is on your computer.
It says my phone can only be set up woth one itunes account. How do I remove the previous account?
No, it tells you it can only be sync'd with one iTunes library.
Simplest way is to copy the entire /Music/iTunes/ folder (thisis the iTunes library) from old computer to new computer.

I've downloaded the past 2 updates for my iphone 5s and now it keeps asking me to trust my own computer and it wont even connect to itunes!

I've downloaded the past 2 updates for my iphone 5s and now it keeps asking me to trust my own computer and it wont even connect to itunes! I am current with software on both my computer and my iphone 5s. Now when I hook it up to my computer it still keeps asking me if I trust the computer and it won't connect to Itunes?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

Is it possible that a second person can manage the website on his own computer?

Is it possible that a second person can manage my website on his own computer?

Is the second person using a Mac? If so yes. All you need do is give them a copy of your domain.sites file that is located under your User/Library/Application Support/iWeb/domain.sites. They can make changes to the site and re-publish, but only if they have your server information etc for the place you are hosting.
If they are not using a Mac, then it is not really feasible to do this - iWeb produces too much code to be comfortably altered using an html editor, so unless that person is using a Mac too, then it is not really worth it. Either they need to have access to a Mac or you need to use another platform that can be accessed by a pc too.

How Do You View PHP Files on Your Own Computer?

Hi everyone, I am working with PHP galleries, but have to upload the file to my website every time I want to look at it. This is very annoying if you want to view the images on your own computer! What is the best way of viewing and testing the files on your own computer?
If it matters I am using a Mac and have Safari and Firefox. I googled this and the results were very confusing! Thanks for your help.

When XAMPP is open if you go to Status (on the left) it says this …
MySQL database
DEACTIVATED
PHP
ACTIVATED
Perl
ACTIVATED
Common Gateway Interface (CGI)
ACTIVATED
Server Side Includes (SSI)
ACTIVATED
PHP extension »OPcache«
DEACTIVATED
see FAQ
PHP extension »OCI8/Oracle«
DEACTIVATED
see FAQ
I don't know if that's good or bad!

Will building the site using my own computer effect my client's usage?

I am wondering if I build my client's website in Contribute CS3 on my own computer, will my client have problems connecting and maintaining her website once I have finished? My client is going to purchase Contribute CS4. Thanks in advance.

Now that I'm more comfortable with what I'm attempting to communicate, let me start over...
I am a newbie at creating a site for a client in iWeb, but I need to keep it separate from my other iWeb stuff so I can upload it to different URL (?).
You helped find the solution to uploading a site from a folder using Cyberduck, but I think there's another part to the equation I haven't solved: I read a post by Old Toad concerning multiple sites and he mentioned iWebSites. Would this be something I would use?

Outgoing ssh goes to my own computer

I tried out a program called AlmostVPN and it didn't work out for me. I uninstalled it and now whenever I try to make an ssh connection to a remote computer I log in to my own computer. I think the output of ifconfig should show if out going port 22 is being forwarded back to the incoming port 22, but I'm afraid I'm just not geek enough to understand it's output (or how to fix it!):
Last login: Tue Apr 11 18:02:35 2006
Welcome to Darwin!
Dr-Milo:~ hammer32$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::203:93ff:feda:504e%en0 prefixlen 64 scopeid 0x4
inet 192.168.2.167 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:03:93:da:50:4e
media: autoselect (100baseTX <full-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
ether 00:30:65:07:fc:00
media: autoselect (<unknown type>) status: inactive
supported media: autoselect
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:03:93:ff:fe:da:50:4e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
Dr-Milo:~ hammer32$
Thanks much,
Sean

Sean,
the output of ifconfig will not tell you if ssh is forwarded back to your own machine.
First thing to do is to disable your firewall (from system preferences). Then check if everything works. It may be a "wrong" rule in your firewall setup.
Please look at the following link:
http://www.oreillynet.com/lpt/a/6306
Mihalis.
Dual G5 @ 2GHz Mac OS X (10.4.6)

Can I browse my own computer with Firefox?

I would like to know if, as in Freemind, there is any way of browsing the folders of my own computer through Firefox.
Thank you

If you type '''C:''' in the location bar it will show the contents of that drive, you can select folders by clicking on them.

Authorizing My Own Computer

Every time i try to authorize my own computer so i can play purchased music i get denied. HELP!

jhk3,
Does it give you any particular reason for doing so?
See if the article in the Apple Knowledge Base helps at all:
http://docs.info.apple.com/article.html?artnum=93014
If not, post back with more details.

I have iPad 2 but I don't have my own computer to set it up w...how do I get my Itunes library on the iPad

My old computer crashed...again. I purchased the ipad 2 for easy travel but I don't know how to get years of my itunes library on the ipad bc I don't have my own computer to set it up on. Is there a way to switch itunes user in order for me to set up my own library of music?

Is there a way to switch itunes user in order for me to set up my own library of music?
No

Is it possible to activate LR5 on a second (privately owned) computer and where do I have to enter the license key?

is it possible to activate LR5 on a second (privately owned) computer and where do I have to enter the license key?

Lightroom doesn't use activation. The EULA allows you to install Lightroom on two computers, one a desktop the other a laptop. To apply the serial number you go to the Help menu then choose Lightroom Registration.

HT201251 I can not cancel the authorization authorized to itunes devices The program asks me to contact support What to do graduate as I can not back up any of my own computer Please attention thanks

I can not cancel the authorization authorized to itunes devices
The program asks me to contact support
What to do graduate as I can not back up any of my own computer
Please attention thanks
MAHMOUD
<Personal Information Removed by Host>

If you haven't already done so then you will need to do as the message tells you and contact iTunes Support (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page

"Custom Access" permissions are locking me out of my own computer!

"Custom Access" permissions are locking me out of my own computer!
I have a Mac Book Pro which I can no longer access, due, I believe, to a problem with disk and file permissions. When I attempt to open up the volume, which I am able to put in FireWire target mode and mount on the desktop of a nearby iMac G5, I get an error message saying: "The folder 'MacBook Pro' could not be opened because you do not have sufficient access privileges."
When I select the 'MacBook Pro' volume and run the Get Info command, I learn that the system, admin, and everyone else groups now have "custom access." I suppose that this newly acquired "custom access" is the reason that the volume icon now appears on the desktop with a lock at its lower left corner! Unfortunately, that lock is keeping me out, so I need help in finding the key back in!
How all this came about overnight is a mystery wrapped in a enigma similar to my getting pneumonia last summer. Coming down with both diseases would require telling long stories that would only have as their common objective the desire to be cured. I might have gotten the pneumonia at my college reunion; my laptop computer might have caught a cold last night when I ran TechTool Pro and optimized my volume prior to installing its eDrive today. Or, my laptop computer may have choked when I tried to add Disk Warrior to the TechTool Pro eDrive and inadvertently issued some command that resulted in my normal permission settings getting changed and rendering everything on the computer completely inaccessible to me. Who knows for sure? Right now, the cause doesn't matter: finding the solution does.
I used TechTool Pro to run a series of tests before (and after) I got locked out of my own computer and the volume passed all the tests for volume integrity and file integrity. TechTool also rebuilt the directory, defragged all the files, and optimized the hard drive into one, large, well-organized segment of files --that I unfortunately can no longer access!
*What I think I need now are some very explicit, error-free, Terminal (UNIX) instructions telling me how to change the permissions on an external FireWire volume called "MacBook Pro" containing Leopard Mac OS X 10.5.7 from its current custom access privileges back to my settings before my poor computer caught this disabling cold.*
I do have a SuperDuper clone of this MacBook Pro computer on an external FireWire, which I could probably use to relieve me of my pain. But, if at all possible, I would like to call upon that option only as a last resort for two reasons:
(1) I am not entirely comfortable that the clone is completely reliable at this moment. My last cloning operation last night (before this corrupted permissions problem occurred) did not complete itself, leaving the cloned volume in an unknown, or unstable, state. (2) I would like to use this problem as an opportunity to grow and learn more about the Terminal and UNIX commands.
I have read the relevant sections in David Pogue's missing manual on Mac OS X Leopard, so I am familiar (in theory) with the concepts he explained regarding ownership, file permissions, the root, Terminal, the CHMOD command, and the SUDO command. It's just that, considering the awesome power of the SuperUser Do command, I'm not all that confident yet that I could write the command(s) that could affect the state of my entire computer hard drive. So, *I'm asking for guidance from a UNIX guru to guide my hand this first time out.*
I know about the idea of safe booting up as a single user, but since I do have my laptop computer mounted on the desktop of my iMac as a Firewire volume, I would prefer to use Terminal on the iMac to fix the permissions on that mounted volume, called "MacBook Pro".
*Experts only, please*. Theories about what might have caused this problem would be nice, but what I really need is explicit command line code to cure this one. Since other people may occasionally encounter this problem of being locked out of their own computer, it would be fine with me if some knowledgeable guru wants to use this as a springboard to write a detailed tutorial on the topic along the way to the solution. Thanks.
bowlerboy_jmb

{I read that article you sent me to, Baltwo, but it does not seem appropriate, because the disk is not invisible. It's locked! I also went through all the discussions on flag changing you directed to me to look up, and I tried to apply something from there to my situation. But that's not working for me yet either. The topics there seem to be close enough to be relevant to my case, but none are exactly on the mark, and so far they deliver no cigar. Maybe I missed the one thread you had in mind from among the twenty I looked through: I can't be sure. You point it out, if you have one in mind. Anyway, in the absence of anyone providing me with specific Unix code or suggestions about my particular situation, I plunged ahead on my own, and I attempted to write some Unix code that might fix my problem. So far, I've had no success. This posting intersperses my comments along with the lines of Unix code which were displayed on my MacBook Pro during my recent attempts to tinker under the hood. My remarks are contained inside of curly brackets like { and } while the results of my Unix experimenting in Single User Mode on the laptop are presented without curly brackets. These were initially notes to myself, so I'm creating a post around my Unix dabbling to see if it triggers any feedback, corrections, and guidance for moving ahead. I'm stuck right now.}
date
Fri Jun 19 17:52:25 EDT 2009
:/ root# sudo chflags nouchg /
sudo: can't open /private/etc/sudoers: Permission denied
:/ root# sendmail: warning: valid_hostname: empty hostname
sendmail: fatal: unable to use my own hostname
:/ root# ls -l
{The screen filled up with rows of file names and their permissions, like...}
drwxrwxr-x+ 43 root admin 1462 Jun 16 04:36 Applications
:/ root# exit
{Nothing happens for quite a while, then...}
jettisoning kernel linker.
{...and then several lines of replies fill up the screen, ending in that same loop regarding no such file or directory found, in regards to mDNSResponder. I had tried the {chmod 775 > solution recommended by a user at a web site I Googled to deal with the mDNSResponder problem he had. The chmod 775 / command worked for him, he reported, but it does not succeed for me. The mDNSResponderline continues to repeat itself ad infinitum, so I must force the Mac to turn off by holding down the power button for several seconds. Upon restart in Single User mode, I observe that, as before, "Root device is mounted read-only," so this time I try to amend permissions at the root level with...}
:/ root# sudo chmod 755 /
{If I understand what I've just learned about Unix, this tells the Mac to give me permission to do anything, but to give all others permission only to read and execute. Unfortunately, the command fails. The computer again responded with the same lines that it gave me when I had issued the command regarding no user flags, namely:}
sudo: can't open /private/etc/sudoers: Permission denied
:/ root# sendmail: warning: valid_hostname: empty hostname
sendmail: fatal: unable to use my own hostname
{So, to summarize, I have a MacBook Pro which I am apparently locked out of and cannot change. The hard disk is not invisible: it will appear as an external drive when placed in Target Mode and connected via a Firewire cable to an iMac. I tried to use Terminal on that iMac to change permissions on the MacBook Pro, but permission was denied.
{So, I have tried to make changes on the MacBook Pro directly. I learned that it will neither start-up under normal circumstances nor via Safe Boot mode. It will, however, start-up under Single User mode. Based on my bleary-eyed crash course in Unix throughout all of last night and early this morning, I did gain some additional understanding about UNIX from some [free online books|http://www.scribd.com/doc/12747795/Made-Easy-Unix-for-Beginners] and articles, especially from a thorough and lucidly written article at Indiana University called [In Unix, how do I change the permissions for a file?|http://kb.iu.edu/data/data/abdb.html]
{Also, I followed the links to the Apple discussions on user flags, and I cherry picked the most appropriate solutions suggested there to see if they will apply to my situation. However, none quite fit. None have thus far succeeded. I think I now know how to formulate the syntax of Unix commands in regards to modifying permissions, and I'm willing to plow ahead and try things out. But I'm only a rank beginner in this Unix realm, so maybe I'm doing something wrong in that department.
{It just boggles my mind that someone can inadvertently be locked out of their computer without a way back in, so all I'm asking for is some trouble-shooting guidance to find the key back in. Anyone got it? Is this a problem that can be cured by writing some Unix commands to the system? Or, does the solution lie elsewhere?}
bowlerboy_jmb

HT1212 i disabled my iphone and im not on my own computer to restore the passcode what do i do?

i cant get into my iphone, it disabled and i am not on my own computer to restore the passcode.

You need to wait until you have access to your computer, or restore the iPhone on another computer and lose all existing data on the iPhone temporarily unless you have an iCloud backup.

Kasperskey said there is a spoofing attack in your previous versions of 32.x, and tells me to update to 32.0.3. I have that now. Why am I getting warnings?

I have kasperskey for my anti virus. I did a vulnerability check and it says this:
A vulnerability has been reported in Mozilla Firefox, Thunderbird, and SeaMonkey, which can be exploited by malicious people to conduct spoofing attacks.
For more information:
SA61538
The vulnerability is reported in Firefox versions prior to 32.0.3, Firefox ESR versions prior to 31.1.1 and prior to 24.8.1, Thunderbird versions prior to 31.1.2 and prior to 24.8.1, and SeaMonkey versions prior to 2.29.1.
I have the latest version according to Firefox, so I do not know why it still says this. Please help, if I have the wrong version, what version should I have and where can I download it?

Help (Alt-H) - About Firefox
If it says 'Firefox is up to date.' and shows version 32.0.3 you're fine.
In that case check with Kasperskey why they flag Firefox as vulnerable.
Otherwise you can download the latest version from
https://www.mozilla.org/en-US/firefox/new/
I wouldn't rely on an anti-virus software to determine whether Firefox is up to date or not.

Spoof Attacks by my own computer?

Similar Messages

Maybe you are looking for