Spoofed caller id to get round anonymous block
I have Caller Reject activated on my line, and anonymous calls are successfully rejected.
However I'm now seeing a marked increase in spoofed caller IDs and answerphone messages about all sorts of offers. There are very few real UK numbers relating to these messages. It's possible that the calls originate overseas, but at least one identity has been 4444444444, so I doubt that's real.
There's no great hardship because I simply delete the message; and if I'm actually at home and see a spoofed caller ID then I let the machine answer the call.
I haven't been able to find anything about whether BT or Ofcom consider this abuse of caller ID to be a problem. Is there an official position on this? It would appear very difficult to do anything about, because the number is useless and the automated message is designed to be listened to live rather than responded to later: there's no real contact number included.
(It may also be relevant that I'm registered with TPS, but I'm not ex-directory.)
I have Caller Reject activated on my line, and anonymous calls are successfully rejected.
However I'm now seeing a marked increase in spoofed caller IDs and answerphone messages about all sorts of offers. There are very few real UK numbers relating to these messages. It's possible that the calls originate overseas, but at least one identity has been 4444444444, so I doubt that's real.
There's no great hardship because I simply delete the message; and if I'm actually at home and see a spoofed caller ID then I let the machine answer the call.
I haven't been able to find anything about whether BT or Ofcom consider this abuse of caller ID to be a problem. Is there an official position on this? It would appear very difficult to do anything about, because the number is useless and the automated message is designed to be listened to live rather than responded to later: there's no real contact number included.
(It may also be relevant that I'm registered with TPS, but I'm not ex-directory.)
Similar Messages
-
Calling sql script from anonymous block
Hi
how to call an script from an anonymous block, like
declare
v_reccord_account number :=0;
begin
SELECT xx.cc INTO v_reccord_account FROM
(select count(1) cc
from accounts
group by account_id
having count(account_id) > 1
)xx
where ROWNUM=1;
if v_reccord_account <1
then
dbms_output.put_line('no duplicates');
ELSE
< here i have to call this script -- @e:/test44.SQL >
end if;
end;Hi
thanks for replying, i'm having some sql statements, i have to spool the results of those statements .. below is the content of the file i'm calling.
=================================================
whenever sqlerror exit sql.sqlcode
set serveroutput on
column fn new_value filename
select 'remove_duplicates_'||to_char(sysdate, 'yyyymmddhh24miss')||'.log' as fn from dual;
spool E:/&filename
prompt 'Checking for duplicates'
--select account_id, count(1)
--from accounts
--group by account_id
--having count(1) > 1;
prompt 'Records to be deleted'
select *
from accounts
where decode ( substr(account_id,1,3),'COG',1,0)=1
group by account_id
having count(1) > 1;
prompt ' Deleting duplicates'
delete
from accounts
where account_id in (
select account_id
from accounts
where decode ( substr(account_id,1,3),'COG',1,0)=1
group by account_id
having count(1) > 1
commit;
========================================== -
Printing the Package output from Anonymous block
Hi,
I need to call the below package from anonymous block and get the output.
Could you let me know.
I tried using this, but i don't get data.
===========Anonymous Block=====================================================================
declare
var xxdc.xxdc_sr_log_his_pkg.sr_tbl_type;
l_sr_idx_bi BINARY_INTEGER := 0;
BEGIN
xxdc.xxdc_sr_log_his_pkg.service_record('14040',var);
dbms_output.put_line('CLAIM_CREDIT_OFFERS :'||var(l_sr_idx_bi).qa_credit_offers(l_sr_idx_bi).character1 );
end;
=============================================================================================
============================================================================================
Package Spec
TYPE cr_offer_type IS TABLE OF apps.qa_results_v%ROWTYPE
INDEX BY BINARY_INTEGER;
TYPE sr_rec_type IS RECORD
(task_status apps.jtf_task_statuses_tl.name%TYPE
,task_type apps.jtf_task_types_tl.name%TYPE
,qa_credit_offers cr_offer_type
TYPE sr_tbl_type IS TABLE OF sr_rec_type
INDEX BY BINARY_INTEGER;
PROCEDURE service_record(p_service_req_num IN VARCHAR2
,p_service_req_tbl OUT sr_tbl_type
Package Body
FOR emp_row_rec IN cur_credit_off
LOOP
l_sr_tbl(l_sr_idx_bi).qa_credit_offers(l_sr_idx_bi).character1 := emp_row_rec.character1;
--dbms_output.put_line( l_sr_tbl(l_sr_idx_bi).qa_credit_offers(l_sr_idx_bi).character1); --commenting for testing
l_sr_idx_bi := l_sr_idx_bi + 1;
END LOOP;
p_service_req_tbl := l_sr_tbl;
=============================================================================================
ThankHi,
Did you issue the SQL*Plus command
SET SERVEROUTPUT ON
or, if you're using some other front end, its equivalent?
Can you ever see output from dbms_output? For example, what happens when you run this?
SET SERVEROUTPUT ON
BEGIN
dbms_output.put_line ('Hello, world!');
END;
Since I don't have your tables, I can't actually run your code. If you'd post CREATE TABLE and INSERT statements, or re-write the package to reference commonly available tables, such as those in the scott schema, then I could test it. -
How do we refer the anonymous block in PL/SQL? And what is the purpose of anonymous blocks?
830933 wrote:
How do we refer the anonymous block in PL/SQL? You cannot refer to a code unit by name, that has no name. A stored proc, stored function and stored package all have names. These are not only stored as a named object in the database, but if valid, also compiled and ready to be loaded and executed.
An anonymous block has no name. So it cannot be stored as a named object in the database. You can store it in a column as a value for example. You can store it on the client as a SQL script file. Or the client can dynamically create anonymous blocks - as is the usual case.
An anonymous block always need to be parsed and compiled before it can used.
And what is the purpose of anonymous blocks?If your Visual Basic client need to execute a SQL statement, then the "anonymous SQL block" (which we simply call the SQL statement) that will be created and send to Oracle would look something as follows:
select e.* from SCOTT.emp e where e.dept_no = :1Now anonymous PL/SQL blocks are not really different. Clients will typically create dynamic anonymous PL/SQL blocks for making PL/SQL procedural calls. Let's say your Visual Basic client wants to run procedure CalculateFoo( id in number, res out number ) that resides in the SCOTT schema in the database. It needs to create an anonymous PL/SQL block and place the procedure call in it.
This anonymous block will look as follows:
begin
SCOTT.CalculateFoo( id => :1, res => :2 );
end;It then needs to send this to Oracle to be parsed and executed. Oracle will also expect 2 bind variables to be supplied - an input bind variable called +1+ and an output bind variable called +2+.
So all SQLs that you send are by default "anonymous" SQL blocks of code - that needs to be parsed and executed. Now PL/SQL works in a similar fashion - you will need to send a block of PL/SQL code (and not SQL code) in order to execute PL/SQL procedures and packages. -
Calling a function which has a CLOB parameter via an anonymous block.
OK,
we are moving a lot of exports currently done by Crystal to just be done by stored procs.
So we have a load of existing, some extremely length SQL statements used for these exports.
IN the exports, we have meaningful column headings, so we have a 'lookup' file where all the column names are listed with the desired column name text listed against it.
So - to make our lives easier(i thought) , I have written a Oracle function to extract al;l of the column names as a list (see below).
It works fine except for when I am trying to pass in a SQL treatment that is longer than 4000 character.
What I want to be able to do is simply have an anonymous block that callls my function, I will be running this via SQL explorer.
Something like......
DECLARE
theSQL CLOB;
BEGFIN
theSQL := 'SELECT * FROM ORDERS WHERE 1=0';
SELECT GET_COLUNS_AS_LIST( theSQL, 0 ) FROM DUAL;
END;
However, when I run this I get the error................
PLS-00428: an INTO clause is expected in this SELECT statement
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
If I hard code the SQL like this, SELECT GET_COLUNS_AS_LIST( 'SELECT * FROM ORDERS WHERE 1=0', 0 ) FROM DUAL; all is well.
Also, I am going to need to be able to pass in SQL ststement longer that 4000 characters as weel so please bear that in mind.
I am not an Oracle guy, so I guess I am missing something fundamental - Please enlighten me with regards to this.
Any help extremely appreciated.
CREATE OR REPLACE FUNCTION GET_COLUNS_AS_LIST( P_SQL IN VARCHAR2, Add_Equals_Sign Number := 0)
RETURN CLOB
IS
fResult VARCHAR2(32000);
HNDL NUMBER;
d NUMBER;
colCount INTEGER;
i INTEGER;
rec_tab DBMS_SQL.DESC_TAB;
cCRLF VARCHAR(2) := CHR(13) || CHR(10);
LONG_SQL dbms_sql.varchar2s;
n INTEGER;
l INTEGER;
u INTEGER;
StartPos INTEGER;
BEGIN
--INITIIALISE RESULT
fResult := '';
HNDL := DBMS_SQL.OPEN_CURSOR;
l := Length( P_SQL );
u := ( l / 1000 ) + 1;
FOR n IN 1..u
LOOP
StartPos := ( n - 1 ) + 1;
LONG_SQL( n ) := SubStr( P_SQL, StartPos, 1000 );
END LOOP;
if HNDL <> 0 THEN
DBMS_SQL.PARSE ( c => HNDL,
statement => LONG_SQL,
lb => 1,
ub => u,
lfflg => false,
language_flag => DBMS_SQL.NATIVE );
--DBMS_SQL.PARSE( HNDL, P_SQL, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE( HNDL );
DBMS_SQL.DESCRIBE_COLUMNS( HNDL, colCount, rec_tab);
FOR i in 1..colCount
LOOP
IF Add_Equals_Sign > 0 AND i > 1 THEN
fResult := ltrim( fResult || '=' || cCRLF || UPPER( rec_tab( i ).col_name ), cCRLF );
ELSE
fResult := ltrim( fResult || cCRLF || UPPER( rec_tab( i ).col_name ), cCRLF );
END IF;
END LOOP;
IF Add_Equals_Sign > 0 THEN
fResult := fResult ||'=';
END IF;
ELSE
fResult := '!!COULD NOT OPEN CURSOR!!';
fResult := P_SQL;
END IF;
RETURN fResult;
--Tidy Up
DBMS_SQL.CLOSE_CURSOR(HNDL);
Return 'EGG';
END;
--EXAMPLE USAGE
--Select GET_COLUNS_AS_LIST
--Select * from SALES_TYPE
--', 1) FROM DUAL;So I have ended up with this.
When I next get some time, I'd like to be able to strip out the table and simply output the results to an SQL Developer script window without having to go through the table.
Now this works - but if you see that I am doing something wrong - please point it out.
Many thanks,
Ant
CREATE OR REPLACE FUNCTION GET_COLUNS_AS_LIST( P_SQL IN CLOB, Add_Equals_Sign Number := 0)
RETURN VARCHAR2
IS
fResult VARCHAR2(32000);
HNDL NUMBER;
d NUMBER;
colCount INTEGER;
i INTEGER;
ChunkSize INTEGER;
rec_tab DBMS_SQL.DESC_TAB;
cCRLF VARCHAR(2) := CHR(13) || CHR(10);
LONG_SQL dbms_sql.varchar2s;
n INTEGER;
l INTEGER;
u INTEGER;
StartPos INTEGER;
BEGIN
--INITIIALISE RESULT
HNDL := 0;
ChunkSize := 4;
fResult := '';
--fResult := fResult|| 'A';
HNDL := DBMS_SQL.OPEN_CURSOR;
--l := Length( P_SQL );
l := dbms_lob.getLength( P_SQL );
--l := 50;
u := Round( l / ChunkSize ) + 1;
--fResult := fResult|| 'B';
FOR n IN 1..u
LOOP
StartPos := ( ( n - 1 ) * ChunkSize ) + 1;
IF StartPos = 0 THEN
StartPos := 1;
END IF;
--LONG_SQL( n ) := SubStr( P_SQL, StartPos, ChunkSize );
LONG_SQL( n ) := DBMS_LOB.SUBSTR( P_SQL, ChunkSize, StartPos );
END LOOP;
--fResult := fResult|| 'C';
if HNDL <> 0 THEN
DBMS_SQL.PARSE ( c => HNDL,
statement => LONG_SQL,
lb => 1,
ub => u,
lfflg => false,
language_flag => DBMS_SQL.NATIVE );
--DBMS_SQL.PARSE( HNDL, P_SQL, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE( HNDL );
DBMS_SQL.DESCRIBE_COLUMNS( HNDL, colCount, rec_tab);
--fResult := fResult|| 'D';
FOR i in 1..colCount
LOOP
IF Add_Equals_Sign > 0 AND i > 1 THEN
fResult := ltrim( fResult || '=' || cCRLF || UPPER( rec_tab( i ).col_name ), cCRLF );
ELSE
fResult := ltrim( fResult || cCRLF || UPPER( rec_tab( i ).col_name ), cCRLF );
END IF;
END LOOP;
IF Add_Equals_Sign > 0 THEN
fResult := fResult ||'=';
END IF;
ELSE
fResult := '!!COULD NOT OPEN CURSOR!!';
END IF;
RETURN fResult;
--Tidy Up
IF HNDL <> 0 THEN
DBMS_SQL.CLOSE_CURSOR(HNDL);
END IF;
END;
-- !!!!HOW TO USE THIS FUNCTION!!!!
BEGIN
EXECUTE IMMEDIATE ('DROP TABLE RPT_COLNAME_LOOKUPS;');
COMMIT;
EXECUTE IMMEDIATE ('CREATE TABLE RPT_COLNAME_LOOKUPS( COLUMN_NAME CLOB );');
COMMIT;
EXCEPTION WHEN OTHERS THEN NULL;
END;
DECLARE
theSQL Clob;
myresult CLOB;
BEGIN
--CLEAR OUT PREVIOUS RWS
DELETE FROM RPT_COLNAME_LOOKUPS; COMMIT;
--ASSIGN THE SQL TO RUN IT FOR
theSQL := '
SELECT
EVENT.EVENT_ID AS COCK_SUCKER,
EVENT.EVENT_CODE, BLAH, BLAH, VERY LONG SQL STATEMENT';
--CALL THE FUNCTION PASSING IN THE SQL AND IF I WANT THE = OR NOT
SELECT GET_COLUNS_AS_LIST( theSQL, 1 ) INTO myresult FROM DUAL;
--INSERT THE RESULTS INTO A TABLE SO WE CAN GRAB THEM
INSERT INTO RPT_COLNAME_LOOKUPS SELECT myresult FROM DUAL;
COMMIT;
END;
--THEN LOOK AT THE COLUMNS NAMES IN THIS TABLE
--SELECT * FROM RPT_COLNAME_LOOKUPS;
--############################################################################# -
INVALID CURSOR - Anonymous Block calling Cursor in function
I am getting an error when trying to call my cursor.
CREATE OR REPLACE PACKAGE tax_update
AS
TYPE gencur IS ref cursor;
FUNCTION tax_sf
p_state IN bb_tax.state%type,
p_thecursor IN OUT gencur
RETURN NUMBER;
END;
CREATE OR REPLACE PACKAGE BODY tax_update
AS
FUNCTION tax_sf
p_state IN bb_tax.state%type,
p_thecursor IN OUT gencur
RETURN NUMBER
IS
lv_taxrate NUMBER;
BEGIN
OPEN p_thecursor FOR
SELECT taxrate
FROM bb_tax
WHERE state = p_state;
RETURN lv_taxrate;
END;
END;
DECLARE
tax_cur tax_update.gencur;
rec_tax bb_tax%rowtype;
BEGIN
LOOP
FETCH tax_cur INTO rec_tax;
EXIT WHEN tax_cur%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(rec_tax.taxrate);
END LOOP;
END;
DECLARE
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at line 6Assignment is to create a package that will hold tax rates by state in a packaged cursor. The package will contain a function that can receive a 2 character state abbr. as an argument and find a match in the cursor and return the tax rate for tha tstate. An anonymous block will test the function with state of NC.
Can anyone assist?You would need to call the function to open the cursor before you try to fetch from the cursor
DECLARE
tax_cur tax_update.gencur;
rec_tax bb_tax%rowtype;
l_some_number number;
BEGIN
l_some_number := tax_update.tax_sf( <<some state parameter>>, tax_cur );
LOOP
FETCH tax_cur INTO rec_tax;
EXIT WHEN tax_cur%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(rec_tax.taxrate);
END LOOP;
END;A couple of points, though.
1) Your function returns a NUMBER but that NUMBER will always be NULL. It seems rather unlikely that this is really what you want. It would seem to make more sense for the function to return the cursor rather than returning a superfluous number.
2) Your function requires a `bb_tax.state%type` parameter. But your anonymous block doesn't seem to have any concept of a state so I'm not sure what you want to pass in there.
3) Looking at the code, it seems a bit odd that your cursor returns a single column of data. If a state can have multiple rates, wouldn't you need to select some additional criteria in order to figure out which sort of tax each row represents or to otherwise differentiate different rows? If a state can only have a single tax rate, it makes no sense to open a cursor that is only going to ever return a single row.
4) There is no need to declare your own weak ref cursor type (tax_update.gencur). You can just use the Oracle built-in type SYS_REFCURSOR.
Justin -
PL anonymous block does everything, but then gets stuck
We have a PL/SQL block that loops through a cursor, and inserts data into another table. We're having a strange issue with it... Every single line of code within it appears to function correctly... It does everything we want it to. The last line on it calls a simple function that writes a record to a table we made, to indicate it has completed. It does that, and we can see the record is inserted successfully.
The problem: even though we can see it did everything, it gets "stuck". If we run it as a anonymous block, the sql plus session will just stay stuck. Same thing if we turn it into a procedure and invoke it. It just stays stuck. Viewing it from OEM... We can see the session as "active", but it doesn't show that it's currently executing anything.
How can we go about figuring out what the problem is?
We've tried it on four databases... All windows platforms.. Three were oracle 10g, one was Oracle 11g. One more interesting note: one of the 10g ones... the problem does not occur... the script finishes fine. But, we don't know what is different about this database from the others.
We also notice the problem doesn't happen if we limit the amount of records... the initial cursor we process, if we limit it using "rownum < 100" or something like that, it will also always finish fine.
This is the script:
set echo on
set serveroutput on
declare
n_notes_count number;
n_records_read number;
dt_today date;
MYDATE DATE;
dt_comment_date date;
dt_updated_date date;
t_conv_exceptions "ODB"."CONVERSION_EXCEPTIONS" %ROWTYPE;
t_conv_exceptions_default "ODB"."CONVERSION_EXCEPTIONS" %ROWTYPE;
t_note_pad "ODB"."NOTE_PAD"%ROWTYPE;
t_note_pad_clear "ODB"."NOTE_PAD"%ROWTYPE;
t_pfcomm "PMI"."PFCOMM"%ROWTYPE;
c_created_by "ODB"."NOTE_PAD"."CREATED_BY" % type ;
-- Exceptions to be raised
ex_notes_number_blank EXCEPTION;
--ex_category_not_exists EXCEPTION;
--....more to come.....
CURSOR cur_notes IS
SELECT PF."MMNUM",
PF."MMLIN",
PF."MMDES",
PF."MMUSR",
PF."MMMM",
PF."MMDD",
PF."MMYY",
PF."MMCC",
--"pfcomm"."mmchr",
--"pfcomm"."mncmn",
--"pfcomm"."mmtype",
PF."MMUSRU",
PF."MMMMU",
PF."MMDDU",
PF."MMYYU",
PF."MMCCU"
FROM PMI."PFCOMM" PF
WHERE TRIM(PF."MMDES") IS NOT NULL
ORDER BY PF."MMNUM", PF."MMLIN";
BEGIN
-- Initialize variables
dt_today := "ODB"."PKG_APPLICATION_FUNCTION"."CURRENTDATETIME";
c_created_by :='PFCOMM';
-- Setup defaults for exceptions table
t_conv_exceptions_default."SCRIPT" := 'atlas_notes';
t_conv_exceptions_default."EXECUTION_DATE" := dt_Today;
t_conv_exceptions_default."CREATED_BY" := c_created_by;
-- Set up header record for exception
t_conv_exceptions := t_conv_exceptions_default;
t_conv_exceptions.column_01 := 'NOTES';
t_conv_exceptions.header := 'Y';
ODB.PKG_CONVERSIONS_EXCEPTIONS.writeException(t_conv_exceptions, false);
-- Count records in table
SELECT COUNT(*)
INTO n_records_read
FROM PMI."PFCOMM";
-- Delete previously inserted records
DELETE FROM "ODB"."NOTE_PAD" NP
WHERE NP."CREATED_BY" = c_created_by or NP."MODIFIED_BY" = c_created_by;
DELETE FROM "ODB"."NOTE_PAD" NP
WHERE NP."CREATED_BY" = 'PFCOMM2' or NP."MODIFIED_BY" = 'PFCOMM2';
DELETE FROM "ODB"."CONVERSION_EXCEPTIONS" CV
WHERE CV."CREATED_BY" IN (c_created_by,'PFCOMM2');
COMMIT;
/* Do Fetch here */
OPEN cur_notes;
LOOP
FETCH cur_notes
INTO t_pfcomm."MMNUM",
t_pfcomm."MMLIN",
t_pfcomm."MMDES",
t_pfcomm."MMUSR",
t_pfcomm."MMMM",
t_pfcomm."MMDD",
t_pfcomm."MMYY",
t_pfcomm."MMCC",
--"t_pfcommcomm"."mmchr",
--"t_pfcommcomm"."mncmn",
--"t_pfcommcomm"."mmtype",
t_pfcomm."MMUSRU",
t_pfcomm."MMMMU",
t_pfcomm."MMDDU",
t_pfcomm."MMYYU",
t_pfcomm."MMCCU";
EXIT
WHEN cur_notes % NOTFOUND;
-- Clear Variables
t_note_pad := t_note_pad_clear;
dt_comment_date := null;
dt_updated_date := null;
-- Begin variable assignments
t_conv_exceptions."COLUMN_01" := t_note_pad."NOTES";
t_note_pad."NOTES" := t_pfcomm."MMNUM";
t_note_pad."NOTES_TEXT" := t_pfcomm."MMDES";
-- Validate required fields
If t_note_pad."NOTES" is null Then
raise ex_notes_number_blank;
End if;
-- Sequence lines correctly
SELECT NVL( MAX("ODB"."NOTE_PAD"."NOTES_LINE"), 0)
INTO t_note_pad."NOTES_LINE"
FROM "ODB"."NOTE_PAD"
WHERE "ODB"."NOTE_PAD"."NOTES" = t_note_pad."NOTES"
-- Next note line number to insert
If t_note_pad."NOTES_LINE" is null Then
t_note_pad."NOTES_LINE" := 1;
Else
t_note_pad."NOTES_LINE" := t_note_pad."NOTES_LINE" + 1;
End if;
-- MMDDCCYY - Comment Date
If t_pfcomm."MMMM" > 0 Or t_pfcomm."MMDD" > 0 Or t_pfcomm."MMCC" > 0 Or t_pfcomm."MMYY" > 0 Then
SELECT TO_DATE(LPAD(t_pfcomm."MMMM",2,'0') || LPAD(t_pfcomm."MMDD",2,'0') || LPAD(t_pfcomm."MMCC",2,'0')|| LPAD( t_pfcomm."MMYY",2,'0'),'MMDDYYYY') INTO dt_comment_date FROM DUAL;
End if;
-- MMDDCCYY - Updated Date
If t_pfcomm."MMMMU" > 0 Or t_pfcomm."MMDDU" > 0 Or t_pfcomm."MMCCU" > 0 Or t_pfcomm."MMYYU" > 0 Then
SELECT TO_DATE(LPAD(t_pfcomm."MMMMU",2,'0') || LPAD(t_pfcomm."MMDDU",2,'0') || LPAD(t_pfcomm."MMCCU",2,'0')|| LPAD( t_pfcomm."MMYYU",2,'0'),'MMDDYYYY') INTO dt_updated_date FROM DUAL;
End if;
-- Updated user information
IF dt_updated_date is not null Then
t_note_pad."CREATED_BY" := TRIM(t_pfcomm."MMUSRU");
t_note_pad."CREATED_DATE" := dt_updated_date;
Elsif dt_comment_date is not null Then
t_note_pad."CREATED_BY" := TRIM(t_pfcomm."MMUSR");
t_note_pad."CREATED_DATE" := dt_comment_date;
Else
t_note_pad."CREATED_BY" := c_created_by;
t_note_pad."CREATED_DATE" := dt_today;
END IF;
/* Validate mandatory fields of TRAX table */
IF t_note_pad.NOTES = 0 THEN
t_note_pad.NOTES :=null;
End If;
IF t_note_pad.NOTES_LINE is null THEN
t_note_pad.NOTES_LINE := 1;
End If;
IF TRIM(t_note_pad.PRINT_NOTES) is null Then
t_note_pad.PRINT_NOTES := 'YES';
END IF;
IF TRIM(t_note_pad.NOTES_CATEGORY) is null THEN
t_note_pad.NOTES_CATEGORY := 'NORMAL';
END IF;
If TRIM(t_note_pad."CREATED_BY") is null Then
t_note_pad."CREATED_BY" := c_created_by;
End if;
If TRIM(t_note_pad."MODIFIED_BY") is null Then
t_note_pad."MODIFIED_BY" := c_created_by;
End if;
If TRIM(t_note_pad."MODIFIED_DATE") is null Then
t_note_pad."MODIFIED_DATE" := dt_today;
End if;
If TRIM(t_note_pad."CREATED_DATE") is null Then
t_note_pad."CREATED_DATE" := dt_today;
End if;
-- end structure validation
/* Do Insert here here */
insert into "ODB"."NOTE_PAD"
values t_note_pad;
commit;
END LOOP;
dbms_output.put_line('After loop.');
CLOSE cur_notes;
-- Update NOTES Switch
SELECT MAX(NT."NOTES") + 100
INTO n_notes_count
FROM "ODB"."NOTE_PAD" NT
UPDATE "ODB"."SYSTEM_TRAN_CONFIG"
SET "CONFIG_NUMBER" = n_notes_count,
"MODIFIED_BY" = 'TRAXCNV',
"MODIFIED_DATE" = dt_today
WHERE ( ODB."SYSTEM_TRAN_CONFIG"."SYSTEM_TRANSACTION" = 'CONFIGURATION' ) AND
( ODB."SYSTEM_TRAN_CONFIG"."SYSTEM_CODE" ='NOTES' )
COMMIT;
dbms_output.put_line('before audit.');
/* Do Save Audit record */
"ODB"."PKG_CONVERSIONS_EXCEPTIONS".writeAudit(t_conv_exceptions."SCRIPT",c_created_by,n_records_read,dt_today);
dbms_output.put_line('After audit.');
SELECT SYSDATE INTO MYDATE FROM DUAL;
-- Begin exception handling.
exception
when ex_notes_number_blank then
t_conv_exceptions.exception_description := 'Note number is blank.';
ODB.PKG_CONVERSIONS_EXCEPTIONS.writeException(t_conv_exceptions, false);
when others then
t_conv_exceptions.exception_description := substr(SQLERRM,1,1000);
ODB.PKG_CONVERSIONS_EXCEPTIONS.writeException(t_conv_exceptions, false);
RAISE;
-- End exception handling.
dbms_output.put_line('before end.');
END ;
/Avoid row-at-a-time processing if at all possible (cursor for loops, periodic commits, etc).
Try adding some calls to dbms_application_info.set_module (or set_action) in order to find out where your code is. -
Help!! how to call pl/sql anonymous block from java?
I know that jdbc can call a pl/sql package or procedure,but if i
want to call a pl/sql anonymous block, how can i do it? no procedure
name or package name will be offered.
Can u give me a sample code? thanks very muchthanks ,but do u make sure that it can work? i have tried to do like this ,but i can not get it. Or please give me a detail code, thanks very much
-
PL/SQL Anonymous Block - Trying to Call Function within Cursor
Hello -
I need to create an anonymous block that contains a cursor and a function. I want to call the function from within the cursor, and the function will basically take an ID as its IN parameter, and will return a comma separated list of values.
However, when I try to do this I get the error " function 'GET_PAYMENT_DATES' may not be used in SQL".
Does anyone know of a workaround? I'm trying to avoid having to store this function.
Thanks,
ChristineExploring Keith's suggestion of using the function code inline in your SQL:
test@ORA10G>
test@ORA10G> --
test@ORA10G> drop table t;
Table dropped.
test@ORA10G> drop table monetary_trans;
Table dropped.
test@ORA10G>
test@ORA10G> create table monetary_trans as
2 select 1 household_id, trunc(sysdate)-10 received_date from dual union all
3 select 1, trunc(sysdate)-9 from dual union all
4 select 1, trunc(sysdate)-8 from dual union all
5 select 2, trunc(sysdate)-7 from dual union all
6 select 2, trunc(sysdate)-6 from dual;
Table created.
test@ORA10G>
test@ORA10G> create table t as
2 select rownum x, rownum*10 y from dual connect by level <= 4;
Table created.
test@ORA10G>
test@ORA10G> --
test@ORA10G> select * from monetary_trans;
HOUSEHOLD_ID RECEIVED_
1 28-DEC-08
1 29-DEC-08
1 30-DEC-08
2 31-DEC-08
2 01-JAN-09
test@ORA10G> select * from t;
X Y
1 10
2 20
3 30
4 40
test@ORA10G>
test@ORA10G> --
test@ORA10G> -- the function code could be rewritten as follows
test@ORA10G> --
test@ORA10G> select household_id,
2 ltrim(sys_connect_by_path(rd,','),',') payment_dates
3 from
4 (
5 select household_id,
6 to_char(received_date,'mm/dd/yy') as rd,
7 row_number() over (partition by household_id order by 1) rn,
8 count(*) over (partition by household_id) cnt
9 from monetary_trans
10 -- and the constraints here in the where clause
11 )
12 where level = cnt
13 start with rn = 1
14 connect by prior household_id = household_id
15 and prior rn = rn - 1
16 and household_id = 1 -- <== this is the input parameter value
17 ;
HOUSEHOLD_ID PAYMENT_DATES
1 12/28/08,12/29/08,12/30/08
test@ORA10G>
test@ORA10G> --
test@ORA10G> -- and can be used as an inline view when joined with other tables
test@ORA10G> --
test@ORA10G> select t.y,
2 fn.payment_dates
3 from t,
4 (select household_id,
5 ltrim(sys_connect_by_path(rd,','),',') payment_dates
6 from (select household_id,
7 to_char(received_date,'mm/dd/yy') as rd,
8 row_number() over (partition by household_id order by 1) rn,
9 count(*) over (partition by household_id) cnt
10 from monetary_trans)
11 where level = cnt
12 start with rn = 1
13 connect by prior household_id = household_id
14 and prior rn = rn - 1
15 ) fn
16 where t.x = fn.household_id
17 ;
Y PAYMENT_DATES
10 12/28/08,12/29/08,12/30/08
20 12/31/08,01/01/09
test@ORA10G>
test@ORA10G>HTH
isotope -
Calling Anonymous block from VO
Hi All,
I have an Anonymous block which contains Record types, table types, functions, and procedure. Procedure returns multiple rows using all functions and types. I want to display those rows in Advanced table in OAF page. Please suggest methods to get this done.
Thanks in advance.
Kaushik RambhiyaHi Kaushik ,
You can make use of Prepared statment or Callable statement (both are Java API's ) to call an pl/sql block .
Regards ,
Keerthi -
Getting value with an anonymous block using ODP
Hi all!
I have a problem I hope someone can help me with. I believe it to be a minor one. I am trying to imbed an anonymous block into my .net app and use it dynamically to get a value from the database depending on the values in a tables. Since my procedure is quite large I am displaying a small example proc for simplicity purposes. Basically I want to execute an anonymous block from my app that will return a value (not a row or rows) from the database. The code is below:
Private Sub test()
Dim cn As New OracleConnection(profileString)
Try
Dim sb As New System.Text.StringBuilder
sb.Append("Declare ")
sb.Append("v_maxnum varchar2(6); ")
sb.Append("Begin ")
sb.Append("Select max(to_number(email_address_id)) into ")
sb.Append("v_maxnum from CVWH14_CDRV_TEST.EMAIL_ADDRESS_TBL; ")
sb.Append("dbms_output.put_line(v_maxnum); ")
sb.Append("Exception ")
sb.Append("When Others ")
sb.Append("Then ")
sb.Append("dbms_output.put_line('Program run errors have occurred.'); ")
sb.Append("End; ")
Dim cmd As New OracleCommand(sb.ToString, cn)
With cmd
cmd.CommandType = CommandType.Text
Dim parm As New OracleParameter
parm.ParameterName = "v_maxnum"
parm.OracleType = OracleType.VarChar
parm.Direction = ParameterDirection.Output
parm.Size = 6
cmd.Connection.Open()
Dim ret As Object = cmd.ExecuteScalar()
Dim res As String = cmd.Parameters.Item(0).Value.ToString -- **Error is occuring here**
cmd.Connection.Close()
cmd.Dispose()
End With
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
'End If
If cn.State = ConnectionState.Open Then
cn.Close()
End If
End Try
End Sub
The exception error reads "Invalid Index 0 for this OracleParameterCollection with Count=0."
If I can figure out how to get a parameter value from the database via the anonymous block, I can apply the logic to the real application. Any help or direction I could receive would be greatly appreciated. Thanks for reading this post!Thank you for responding. The code that I posted was just one of many ways I have tried. I retried the proc making just 2 changes:
Private Sub test()
Dim cn As New OracleConnection(profileString)
Try
Dim sb As New System.Text.StringBuilder
sb.Append("Declare ")
sb.Append("v_maxnum varchar2(6); ")
sb.Append("Begin ")
sb.Append("Select max(to_number(email_address_id)) into ")
sb.Append("v_maxnum from CVWH14_CDRV_TEST.EMAIL_ADDRESS_TBL; ")
sb.Append("dbms_output.put_line(:v_maxnum); ") -- !Changed this to a bind variable!
sb.Append("Exception ")
sb.Append("When Others ")
sb.Append("Then ")
sb.Append("dbms_output.put_line('Program run errors have occurred.'); ")
sb.Append("End; ")
Dim cmd As New OracleCommand(sb.ToString, cn)
With cmd
cmd.CommandType = CommandType.Text
Dim parm As New OracleParameter
parm.ParameterName = ":v_maxnum" -- !Changed this to a bind variable!
parm.OracleType = OracleType.VarChar
parm.Direction = ParameterDirection.Output
parm.Size = 6
cmd.Connection.Open()
Dim ret As Object = cmd.ExecuteScalar() -- !The error is now occuring here!
Dim res As String = cmd.Parameters.Item(0).Value.ToString
cmd.Connection.Close()
cmd.Dispose()
End With
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
If cn.State = ConnectionState.Open Then
cn.Close()
End If
End Try
End Sub
I am now getting the error message "Not all variables bound". Any more help or direction that you could throw my way would be greatly appreciated. -
Calling PL/SQL anonymous block from href in tabular report
apex 2.2.
I've got a tabular report where I've added some img columns with a href to call diff processes
for example
"<a href="f?p=&APP_ID.:22:&APP_SESSION.:BRANCH_TO_PAGE_ACCEPT|NEW_PROXY:NO:::22,ABCDEF ><img src="/i/asyl.gif" border="0" alt="Runprocess"></a>"
When clicking on an image column in row x then I would like to run the process - no page submit.
The pl/sql anonymous block process source calls package.storedproc(p1,p2) - two in parameters
I'm struggling with the syntax and is wondering if there's a smarter way to achieve the same function
Any ideas most welcome
Thanks
Peter<a href="f?p=&APP_ID.:22:&APP_SESSION.:BRANCH_TO_PAGE_ACCEPT|NEW_PROXY:NO:::22,ABCDEFG" ><img src="/i/asylogin.gif" border="0" alt="Process"></a>Question is how can you pass values from a row in a tabular report to the application process ?
-
Hey I would like to get app to block unwanted calls but cant find. any advise
hey I would like to get app to block unwanted calls but cant find. any advise
Yup, dito to ckuan's response - Contact your carrier or assign a silent ringtone/message tone to the contact so you will not be alerted at all to the calls/messages.
-
How to declare in anonymous block
Declare
CURSOR c_je2acct_othr
IS
SELECT j.jemq_num, j.ml_retail_account,
-- (CASE WHEN j.exer_type = 4 THEN j.sar_shares ELSE j.shares END) shares, -- removed * -1 from sar_shares Manu 12/02/04
/* Commented 02/01/07*/
(CASE WHEN j.exer_type = 4 THEN
fn_get_shares(u.user_id,u.exer_num,u.soc_sec,j.
sar_shares)
ELSE (case when u.exer_type=2 and u.opts_exer!=u.shrs_sold and j.shares=u.shrs_sold then 0 else j.shares end)
END) shares,
-- removed * -1 from sar_shares Manu 12/02/04
j.name_first,
j.name_last, j.exer_type, j.ml_sec_num, j.ivr_plan_num,
j.exer_dt, j.grant_dt, j.user_id, j.mlu_rowid, j.settle_dt,
j.exer_num, j.plan_type, j.grant_num, j.acct_num_othr,
j.add_cancel,
/* (CASE WHEN j.exer_type = 4 THEN j.sar_cash_amount * -1 -- turned negative Manu 12/02/04 ml_retail distr
commented the above line for calculation of proceeds into other account for sar sale.
(CASE WHEN j.exer_type = 4 THEN
Pk_Xop_Citibank_Forex.fn_get_netamount(u.user_id,u.
exer_num,u.soc_sec,
u.sar_cash_amount,NVL(u.comm_value, 0),
NVL(u.tot_fee, 0),
NVL(u.multi_curr_handling_fee, 0))
-- Removed the negative as on ml_exer_upload all values are +ve.
ELSE
( (DECODE(u.exer_type,0,u.opts_exer * u.mkt_prc,u.shrs_sold * u.mkt_prc
- ( ROUND((u.opts_exer * NVL (u.opt_prc, 0)),2)
-- SPIF 39060 Added a Round of condition.
+ DECODE (NVL (u.shrs_wthld_for_taxes, 'N'),
'Y', 0,
ROUND (u.tot_tax, 2)
+ u.tot_fee
+ NVL(u.multi_curr_handling_fee,0)
+ u.comm_value
- u.backup_withholding
END ) AS gl_amt,
T.je_othr_mlacct_jemsg AS vc_trailer_desc,
u.opts_exer ,
u.shrs_sold,
u.rsu_type
FROM TB_XOP_JEMQ j, TB_ML_EXER_UPLOAD u, TB_FC_COMPY T
WHERE j.q_flag = 'N' AND u.je_flag = 'Y'
AND j.entry_dttime >= TRUNC (SYSDATE)
AND j.entry_dttime < TRUNC (SYSDATE) +1
AND j.source = 'X'
AND j.acct_num_othr != ' '
and (case when u.exer_type=2 and u.opts_exer!=u.shrs_sold then (case when j.shares=u.shrs_sold then 0 else 1 end) else 1 end)=1 FIx for PCTUP00566081
AND ( disp_flag <> 'D' OR disp_flag IS NULL ) Added by MARAN ARUNACHALAM on 01/25/2011 for PCTUP00493542 Fix
and j.current_status = '2Q' removed not required now in new plan
AND NOT EXISTS (
SELECT 1
FROM TB_XOP_JEMQ j2
WHERE j2.prev_jemq = j.jemq_num
AND source = 'T'
AND j.add_cancel = j2.add_cancel
AND j.user_id = j2.user_id
AND j.exer_num = j2.exer_num)
AND j.mlu_rowid = u.ROWID
AND 'CMS'||T.compy_acronym||'_USER' = j.user_id
ORDER BY add_cancel DESC;
v_mlac_mesg VARCHAR2(1000);
-- JE_OTHR_MLACCT_JEMSG
BEGIN
dbms_output.put_line('success');
FOR v_je2acct_othr IN c_je2acct_othr
LOOP
dbms_output.put_line('success1');
BEGIN
dbms_output.put_line('success2');
IF v_je2acct_othr.add_cancel = 'C'
THEN
dbms_output.put_line('success3');
UPDATE TB_XOP_JEMQ
SET add_cancel = DECODE(current_status,
'RJ',
add_cancel,
'C'),
q_flag = DECODE(current_status, 'RJ', q_flag, 'N'),
activ_dt = DECODE(current_status,
'RJ',
activ_dt,
SYSDATE)
WHERE prev_jemq = v_je2acct_othr.jemq_num
AND user_id = v_je2acct_othr.user_id
AND exer_num = v_je2acct_othr.exer_num
AND source ='T';
dbms_output.put_line('success4');
ELSIF v_je2acct_othr.add_cancel = 'A'
THEN
dbms_output.put_line('success5');
-- manipulating amount and shares to transfer when different exercise types
v_je2acct_othr.gl_amt :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN 0
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer
!= v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.gl_amt
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer =
v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.gl_amt
ELSE v_je2acct_othr.gl_amt
END );
---- Commented on 11/01/2006 For Fixing 30585
/* v_je2acct_othr.shares :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN v_je2acct_othr.opts_exer
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.opts_exer - v_je2acct_othr.shrs_sold
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold
THEN 0
ELSE v_je2acct_othr.shares
END );*/
---- Commented on 11/01/2006 For Fixing 30585
v_je2acct_othr.shares :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN v_je2acct_othr.
Shares
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer
!= v_je2acct_othr.shrs_sold and v_je2acct_othr.shares!=0 and v_je2acct_othr.plan_type <> 0 -- Added plantype condition for CQ:PCTUP00493542
THEN v_je2acct_othr.Shares - v_je2acct_othr.shrs_sold
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer =
v_je2acct_othr.shrs_sold
THEN 0
ELSE v_je2acct_othr.shares
END );
dbms_output.put_line('success6');
IF LENGTH(TRIM(v_je2acct_othr.acct_num_othr))=8 OR TRIM(v_je2acct_othr.acct_num_othr) IS NULL
THEN
v_mlac_mesg :=NULL;
ELSE
v_mlac_mesg :='Check the ml a/c length';
dbms_output.put_line('success7');
END IF;
INSERT INTO TB_XOP_JEMQ
(jemq_num,
prev_jemq,
ml_retail_account,
wcma_shares,
shares, wcma_taxes, tax_amt,
wcma_reimburse,
reimburse_amt,
name_first,
name_last, exer_type,
ml_sec_num, wcma_bulking, bulking_amt,
ivr_plan_num,
exer_dt, grant_dt,
user_id, source,
mlu_rowid, settle_dt,
exer_num, plan_type,
grant_num,
vc_trailer_desc, rsu_type
VALUES (Pk_Xop_Get_Jemqnum.fn_xop_get_jemqnum,
v_je2acct_othr.jemq_num,
v_je2acct_othr.acct_num_othr,
-- 2nd ml_retail_account,
v_je2acct_othr.ml_retail_account,
-- move shares from old acct to 2nd acct above
v_je2acct_othr.shares,
--this is SHARES
--wcma_taxes
0,
--tax_amt,
v_je2acct_othr.ml_retail_account,
-- move gl_amt from old acct to 2nd acct above
v_je2acct_othr.gl_amt * -1,
v_je2acct_othr.name_first,
v_je2acct_othr.name_last, v_je2acct_othr.
exer_type,
v_je2acct_othr.ml_sec_num, ' ',
--wcma_bulking,
0,
--bulking_amt,
v_je2acct_othr.ivr_plan_num,
v_je2acct_othr.exer_dt, v_je2acct_othr.
grant_dt,
v_je2acct_othr.user_id, 'T',
--source
v_je2acct_othr.mlu_rowid, v_je2acct_othr.
settle_dt,
v_je2acct_othr.exer_num, v_je2acct_othr.
plan_type,
v_je2acct_othr.grant_num,
v_je2acct_othr.vc_trailer_desc,
v_je2acct_othr.
rsu_type
dbms_output.put_line('success8');
END IF;
EXCEPTION
WHEN OTHERS
THEN
Pr_Xop_Log_Errors ( 'Code :'
|| NVL(v_mlac_mesg,SQLERRM)
|| ' at '
|| USER
|| 'at sub exec block in pop_je2acct_othr'
END;
dbms_output.put_line('success9'); -- end of begin within loop
END LOOP;
--COMMIT;
EXCEPTION
WHEN OTHERS
THEN
Pr_Xop_Log_Errors ( 'Code :'
|| NVL(v_mlac_mesg,SQLERRM)
|| ' at '
|| USER
|| 'at pk_xop_jemq.pop_je2acct_othr'
dbms_output.put_line('success10');
END;}
{ORA-06550: line 10, column 31:
PL/SQL: ORA-00904: "FN_GET_SHARES": invalid identifier
ORA-06550: line 6, column 11:
PL/SQL: SQL Statement ignored
ORA-06550: line 81, column 17:
PLS-00364: loop index variable 'V_JE2ACCT_OTHR' use is invalid
ORA-06550: line 81, column 14:
PL/SQL: Statement ignored}
HI friends, as i am getting two errors when running code in the anonymous block, then how to declare that 2 errors in declare section plz guide me}Noone, will read your code unless it is formatted like below. See the comments added
DECLARE
CURSOR c_je2acct_othr
IS
SELECT j.jemq_num,
j.ml_retail_account,
-- (CASE WHEN j.exer_type = 4 THEN j.sar_shares ELSE j.shares END) shares, -- removed * -1 from sar_shares Manu 12/02/04
/* Commented 02/01/07*/
CASE
WHEN j.exer_type = 4
--"The current user is not seeing the below function fn_get_shares.Privilege issue probably.
THEN fn_get_shares(u.user_id,u.exer_num,u.soc_sec,j. sar_shares)
ELSE (
CASE
WHEN u.exer_type=2
AND u.opts_exer!=u.shrs_sold
AND j.shares =u.shrs_sold
THEN 0
ELSE j.shares
END)
END) shares,
-- removed * -1 from sar_shares Manu 12/02/04
j.name_first,
j.name_last,
j.exer_type,
j.ml_sec_num,
j.ivr_plan_num,
j.exer_dt,
j.grant_dt,
j.user_id,
j.mlu_rowid,
j.settle_dt,
j.exer_num,
j.plan_type,
j.grant_num,
j.acct_num_othr,
j.add_cancel,
/* (CASE WHEN j.exer_type = 4 THEN j.sar_cash_amount * -1 -- turned negative Manu 12/02/04 ml_retail distr
commented the above line for calculation of proceeds into other account for sar sale.
CASE
WHEN j.exer_type = 4
THEN Pk_Xop_Citibank_Forex.fn_get_netamount(u.user_id,u. exer_num,u.soc_sec, u.sar_cash_amount,NVL(u.comm_value, 0), NVL(u.tot_fee, 0), NVL(u.multi_curr_handling_fee, 0))
-- Removed the negative as on ml_exer_upload all values are +ve.
ELSE ( (DECODE(u.exer_type,0,u.opts_exer * u.mkt_prc,u.shrs_sold * u.mkt_prc )) - ( ROUND((u.opts_exer * NVL (u.opt_prc, 0)),2)
-- SPIF 39060 Added a Round of condition.
+ DECODE (NVL (u.shrs_wthld_for_taxes, 'N'), 'Y', 0, ROUND (u.tot_tax, 2) ) + u.tot_fee + NVL(u.multi_curr_handling_fee,0) + u.comm_value ) - u.backup_withholding )
END ) AS gl_amt,
T.je_othr_mlacct_jemsg AS vc_trailer_desc,
u.opts_exer ,
u.shrs_sold,
u.rsu_type
FROM TB_XOP_JEMQ j,
TB_ML_EXER_UPLOAD u,
TB_FC_COMPY T
WHERE j.q_flag = 'N'
AND u.je_flag = 'Y'
AND j.entry_dttime >= TRUNC (SYSDATE)
AND j.entry_dttime < TRUNC (SYSDATE) +1
AND j.source = 'X'
AND j.acct_num_othr != ' '
--and (case when u.exer_type=2 and u.opts_exer!=u.shrs_sold then (case when j.shares=u.shrs_sold then 0 else 1 end) else 1 end)=1 -- FIx for PCTUP00566081
--AND ( disp_flag <> 'D' OR disp_flag IS NULL ) -- Added by MARAN ARUNACHALAM on 01/25/2011 for PCTUP00493542 Fix
--and j.current_status = '2Q' -- removed not required now in new plan
AND NOT EXISTS
(SELECT 1
FROM TB_XOP_JEMQ j2
WHERE j2.prev_jemq = j.jemq_num
AND source = 'T'
AND j.add_cancel = j2.add_cancel
AND j.user_id = j2.user_id
AND j.exer_num = j2.exer_num
AND j.mlu_rowid = u.ROWID
AND 'CMS'
||T.compy_acronym
||'_USER' = j.user_id
ORDER BY add_cancel DESC;
v_mlac_mesg VARCHAR2(1000);
-- JE_OTHR_MLACCT_JEMSG
BEGIN
dbms_output.put_line('success');
FOR v_je2acct_othr IN c_je2acct_othr
LOOP
dbms_output.put_line('success1');
BEGIN
dbms_output.put_line('success2');
IF v_je2acct_othr.add_cancel = 'C' THEN
dbms_output.put_line('success3');
UPDATE TB_XOP_JEMQ
SET add_cancel = DECODE(current_status, 'RJ', add_cancel, 'C'),
q_flag = DECODE(current_status, 'RJ', q_flag, 'N'),
activ_dt = DECODE(current_status, 'RJ', activ_dt, SYSDATE)
WHERE prev_jemq = v_je2acct_othr.jemq_num
AND user_id = v_je2acct_othr.user_id
AND exer_num = v_je2acct_othr.exer_num
AND source ='T';
dbms_output.put_line('success4');
ELSIF v_je2acct_othr.add_cancel = 'A' THEN
dbms_output.put_line('success5');
-- manipulating amount and shares to transfer when different exercise types
--"You cannot assign values to the recor variable declared for a loop. Either define seperate variables or use explicit record variable"
v_je2acct_othr.gl_amt :=
CASE
WHEN v_je2acct_othr.exer_type = 0 THEN
0
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold THEN
v_je2acct_othr.gl_amt
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold THEN
v_je2acct_othr.gl_amt
ELSE
v_je2acct_othr.gl_amt
END );
---- Commented on 11/01/2006 For Fixing 30585
/* v_je2acct_othr.shares :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN v_je2acct_othr.opts_exer
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.opts_exer - v_je2acct_othr.shrs_sold
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold
THEN 0
ELSE v_je2acct_othr.shares
END );*/
---- Commented on 11/01/2006 For Fixing 30585
v_je2acct_othr.shares :=
CASE
WHEN v_je2acct_othr.exer_type = 0 THEN
v_je2acct_othr. Shares
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold AND v_je2acct_othr.shares!=0 AND v_je2acct_othr.plan_type 0 -- Added plantype condition for CQ:PCTUP00493542
THEN
v_je2acct_othr.Shares - v_je2acct_othr.shrs_sold
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold THEN
0
ELSE
v_je2acct_othr.shares
END );
dbms_output.put_line('success6');
IF LENGTH(TRIM(v_je2acct_othr.acct_num_othr))=8 OR TRIM(v_je2acct_othr.acct_num_othr) IS NULL THEN
v_mlac_mesg :=NULL;
ELSE
v_mlac_mesg :='Check the ml a/c length';
dbms_output.put_line('success7');
END IF;
INSERT
INTO TB_XOP_JEMQ
jemq_num,
prev_jemq,
ml_retail_account,
wcma_shares,
shares,
wcma_taxes,
tax_amt,
wcma_reimburse,
reimburse_amt,
name_first,
name_last,
exer_type,
ml_sec_num,
wcma_bulking,
bulking_amt,
ivr_plan_num,
exer_dt,
grant_dt,
user_id,
source,
mlu_rowid,
settle_dt,
exer_num,
plan_type,
grant_num,
vc_trailer_desc,
rsu_type
VALUES
Pk_Xop_Get_Jemqnum.fn_xop_get_jemqnum,
v_je2acct_othr.jemq_num,
v_je2acct_othr.acct_num_othr,
-- 2nd ml_retail_account,
v_je2acct_othr.ml_retail_account,
-- move shares from old acct to 2nd acct above
v_je2acct_othr.shares,
--this is SHARES
--wcma_taxes
0,
--tax_amt,
v_je2acct_othr.ml_retail_account,
-- move gl_amt from old acct to 2nd acct above
v_je2acct_othr.gl_amt * -1,
v_je2acct_othr.name_first,
v_je2acct_othr.name_last,
v_je2acct_othr. exer_type,
v_je2acct_othr.ml_sec_num,
--wcma_bulking,
0,
--bulking_amt,
v_je2acct_othr.ivr_plan_num,
v_je2acct_othr.exer_dt,
v_je2acct_othr. grant_dt,
v_je2acct_othr.user_id,
'T',
--source
v_je2acct_othr.mlu_rowid,
v_je2acct_othr. settle_dt,
v_je2acct_othr.exer_num,
v_je2acct_othr. plan_type,
v_je2acct_othr.grant_num,
v_je2acct_othr.vc_trailer_desc,
v_je2acct_othr. rsu_type
dbms_output.put_line('success8');
END IF;
EXCEPTION
WHEN OTHERS THEN
Pr_Xop_Log_Errors ( 'Code :' || NVL(v_mlac_mesg,SQLERRM) || ' at ' || USER || 'at sub exec block in pop_je2acct_othr' );
END;
dbms_output.put_line('success9'); -- end of begin within loop
END LOOP;
--COMMIT;
EXCEPTION
WHEN OTHERS THEN
Pr_Xop_Log_Errors ( 'Code :' || NVL(v_mlac_mesg,SQLERRM) || ' at ' || USER || 'at pk_xop_jemq.pop_je2acct_othr' );
dbms_output.put_line('success10');
END;
{code} -
Ref cursor from anonymous block
I have no problem to get a ref cursor from a Fill method call with an anonymous pl/sql block. But if my anonymous block contains a DECLARE section, the dataset is not populated.
ex:
BEGIN OPEN :cuInscription FOR SELECT column FROM table; END;
is ok but with
DECLARE A NUMBER; BEGIN OPEN :cuInscription FOR SELECT column FROM table; END;
the dataset is not populated (even if the SQL CALL succeed).
Do you know about that?This issue has been fixed in the ODP.NET 92040 release.
Maybe you are looking for
-
HT1689 How do I find the balance on a gift card?
I have agift card for the App Store but cannot seem to find where my balance is.
-
XBOX 360 media sharing across wired/wireless
I have a WRT54G, 2 Windows machines, and an XBOX 360. Everything works as expected except that I cannot connect the PC's to the XBOX except via wireless. If a PC is wired to the router, Windows Media Player doesn't see the XBOX. If I ping the XBOX wh
-
I've bought more gb for iphone 4, how do I get to use it. It says its in icloud
II've bought more gb to download a film but it says it in iCloud. How do I get to use it??
-
Script or way to delete or export random pages from pdf...
hello I have many request to export random pages from pdf doc. etc.. 1-3,51,63,78-92...I think that easy way is to have some script which will open dialog box and ask for which pages I want to export or delete from pdf. Anyone have something for this
-
How to handle exceptions / errors in LiveCycle
Hello All , I want to handle some exception / errors that may arise while the user is filling the form so that the JavaScript console should not show any error rather we can simply show an alert / message . Say I got a dynamic table where the user ca