Spool - device type or format type without page breaks

Hi SAP experts,
We have users in our production system running report S_ALR_87012284 on background and then it generates a spool with page breaks in it.
Users were using output device LOCL (device type: SAPWIN) with format X_65_255.
Is there a SAP-standard device type or maybe format type where page breaks are eliminated?
And if none, how should I create a device type or format type that would not have any page breaks at all?
Thanks in advance for your help.
Regards,
Kris Caldoza

Hi,
The RDI Output Mode is blank in all of our System i.e. pre-procuction, dev and Production.
In transaction EA60, there is a button as Print Parameter.
In production system if we select any of the following it gives the same error.
"Device type PLAIN does not support page format DINA4"
Options are:
1. Sap Script Form Settings are Decisive.
2. Raw Data Interface (Output Mode Spool).
3. Raw Data Interface (Output Mode IDOC).
4. Raw Data Interface (Output Mode: Spool (Simple RDI))
5. SAPscript Preparation (OTF).
But, in our Pre-production or dev if we select the First Otion i.e 1
it is giving the same error. but, when selecting the second one it is working.
But, in Production if selecting the option 1 and 2, it is giving the error.
Since the SPAD settings, SapScript Form Settings, Code are exactly the same in all the system.
So, is there any configuration related to it?
Thanks for your valuable advice,
Parthow..

Similar Messages

  • Vendor open items report without page break after changing vendor account

    Hi,
    I would like to get the vendor open items report without pagination when the vendor account changes.
    The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
    Thanks in advance.

    HI,
    If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
    You just have to set this field to the value '2'.
    When you set the field to two, the page break will first executed, when the page is "full".
    If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
    I believe this answer solve your problem.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Display sub header from second group in each page without page break

    Hi All,. I need to show the sub header in each page in pdf output using rtf. I have two grouping region and category. I have used start:body and end:body concept to repeat the header in each page. The region is repeating in each page but I also want the category to repeat in each page without having page break. Any suggestions. Thanks, Sushil

    You could added the category value to the header row and set the table properties for row to repeat on each page.. I have sent a reply to your email. Take a look to see if the output is per expectations.
    Thanks,
    Bipuser

  • Tcode  S_ALR_87012301  Report RFSUSA00 after upg ecc 605 without page break

    Hi !
    This G/L account balances report (Tcode  S_ALR_87012301 : Report RFSUSA00 ), in version 4.6C, have a page break by the subtotals level defined at the selection screen.
    Now after the upgrade with ecc 605, the output is continuous...
    I checked the possibilities of changing the output layout, but didn't find anything to define a pagebreak by the 3 levels at the selection screen....
    Does anyone knows if there is a solution for this?
    Thanks in advance.
    Regards
    CMira

    Hi Experts,
    After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
    Thanks

  • Print large cells without page break

    I am trying to print a continuous spreadsheet. The print tries to keep a cell intact with tons of wasted paper in between. How do I turn off that "keep cell together when printing" concept?

    I'm thinking there is something not processed in the report so forcing the report to process everything up to the last page before printing may help. Try the following code before sending the report to the viewer:
    Dim prc As New CrystalDecisions.Shared.ReportPageRequestContext
    rptDoc.FormatEngine.GetLastPageNumber(prc)
    This may slow down the time it takes for the report to come up as the whole report will need to be processed, formatted, etc.
    Also, make sure you have SP 1 for CR 10.5:
    https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Print FBL5N without page breaks

    Hi,
    I have a problem in printing the output of tcode FBL5N. If I print the output (for many customer) I obtain the print of ONE CUSTOMER FOR EVERY PAPER SHEET. So if I had to print the open item for 20 customer I obtain 20 sheet!!
    Does someone know which are the parametrizations to do in order to solve this problem?
    Thanks in advance,
    Marco

    Hi,
    Got to menu - Settings - Switch list (To ALV) and then try to take print.  If it is unsuccessful, u need to get the help of the abaper
    Regards,
    Sridevi
    <i>Assign points, if useful</i>
    Message was edited by:
            Sridevi

  • ALV to PDF conversion with a page break

    Friends,
        I have a need where I need to print ALV in PDF format with a page break. Any advice on how to do this ? Is it possible to print in PDF format in ver ECC 6.0 without using OTF conversion routine ?
    I tried to create a new device type PDF got an error in the spool when tried to print ?
    Thanks,
    Abap PM

    Hi,
    Check the below links.
    [LINK1|https://wiki.sdn.sap.com/wiki/display/Snippets/SaveReportOutputtoaPDFFile]
    [LINK2|Convert ABAP Report's Output into PDF Format..;
    [LINK3|https://wiki.sdn.sap.com/wiki/display/ABAP/PDF%20Downlaod%20By%20Creating%20Spool%20Request]
    Thanks,
    Sreekanth

  • Extended table printing issues over page break

    I have an extended table on a form that may have many rows - multi pages generated from a database.
    when printing or print pdf - safari and firefox will split a row at bottom of a page and start of next page... page break problem...
    if i control database output wich 50 recs per page then user would have to print each page separately - wasting time - so that is not a good option....
    Q: how do I get this to print best for viewing without page break problem?
    Thaks in advance for your help - dave

    Hi Amruta ,
    I hope the following steps will solve your problem :
    1. Merge the data from the 3 tables into a single table (say gt_outtab).
    2. The table gt_outtab should have a field (say tab ) to indicate the table from which the data has come . Depending on the tables conatining the initial data , you can assign 1, 2 , 3 into the new field (tab).
    3. Bulid the fieldcatalog with the particular column (TAB) of the output table as no_out='X'.
    gs_fieldcat-COL_POS = lv_line.
      gs_fieldcat-fieldname = 'TAB'.
      gs_fieldcat-outputlen = 1.
      gs_fieldcat-just      = 'L'.
      gs_fieldcat-coltext   = 'Table'.
      gs_fieldcat-seltext   = 'Table'.
      gs_fieldcat-NO_OUT   = 'X'.
      APPEND gs_fieldcat TO lt_fcat.
    4. Define the data of type lvc_s_print
    DATA: gs_print TYPE lvc_s_prnt.
    5. Before calling the method set_table_for_first_display assign grpchgedit of the structure gs_print as 'X'
    gs_print-grpchgedit = 'X'.
        CALL METHOD gr_grid->set_table_for_first_display
            EXPORTING
               is_print            = gs_print
               is_layout           = ls_layo
            CHANGING
              it_outtab           = gt_outtab[]
              it_fieldcatalog     = lt_fcat.
    6. Run the report . The particular column is not displayed in the list.
    7. Go to Print Preview mode. Press the sort ascending or descending button on toolbar (without selecting a column).A dialog box appears asking for sort order.
    8. Add the field(TAB), from the available list on right hand side.
    9. In the last column titled NG of this sort order dialog box, write * for page feed .
    10. Press the copy button .
    Hope this solves your problem .
    Thanks ,
    Sudipto

  • How to avoid page break up in background

    hi all,
              i have developed new report i don't given page break statement .. in foreground it s coming correct  without any page break..
    when i have  schedule in background page break is coming please let me know how to avoid page break in background process.
    regards ,
    santosh
    Edited by: santosh jajur on Jul 8, 2009 12:16 PM
    Edited by: santosh jajur on Jul 8, 2009 12:46 PM

    Hi,
    When you view the output from the report run in batch you are presumably looking at the spool output.  Because you are viewing a preview of what is sent to the printer the spool applies page breaks based on the printer parameters.  When you run the report in dialog you view the report on the screen, and the spool is not involved, so no page breaks.
    If you print your report in dialog then review the spool you'll find it has the page break just as the background run has.
    Regards,
    Nick

  • Dynamically insert page breaks (runtime)

    Hi,
    I have 3 repeating frames within each other in Oracle Reports. In the 1st frame I have Product groups. I want to give the user the option (from Oracle Forms) to have all the product groups without page breaks or each product group on one seperate page.
    I only found the "Maximum records per page" property but this can't be set in runtime. I also tried to put a boilerplate on the repeating frame and gave it the property "Page break before". It worked pretty well except on page 2 it repeated the first product group and on page 3 it repeated the second productgroup and so on.
    Does anybody have a solution for my problem?
    Thanks

    I did this long time back.
    1. keep repeating frame with field(value null or line) with page break..
    2. using Format Trigger show or hide this field.

  • New file per page break

    Is there a way to have a Crystal Report export a seperate PDF or other format file per page break in the report?

    Hi Bill,
    According to my understanding you have a report running into multiple pages and you would like it to have exported on different PDFu2019s.
    I have done a quick test and we cannot have a different PDF for each page break in the report. When we export a report that will export the whole report.
    I hope this helps you.
    Regards,
    Prashant

  • Problem with new format type in spool

    Hi All,
    I have created new format type with 65 pages & 140 columns size. I have assigned it to corresponding device type which is copied from standard device type. Then i have assigned to output device type.
    But when i print using this new format type its printing in half of the page width. What should be dont if i want print in whole paper width.
    When i use standard format type x_65_132 , its printing in whole page width of 132 columns. But with my new format type its printing all line content , but its printing in very small font within half of the page width. It should print in whole page. Please help me to print in whole page width with bigger font as in 132 column options.
    Thanks in adavance.
    Vishal

    Norman,
    Thanks for ur reply.
    I have gone through all the stpes for creating new format.
    I don't know what is printer initialization string and the other escape sequences, how to get modified these please let me know.
    new format is working, but problem is its printing in half of the page width, i need to print in whole page width. Thanks.

  • Error: Device type SWIN does not support page..

    Hi All,
    I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
    Device type SWIN does not support page for  ZSTICKER(my page name).
    Please do needful help ASAP.
    -Dharmesh

    Hi,
    You need to link your new page to a device type.  Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
    Regards,
    Nick

  • How to Change default format type in output device

    Hi all,
    I want to change the default format type from X_65_80 to another for all users.
    Can anyone tell me the process.
    Platform: SAP ECC 5.0 + Oracle 9.2.0.7 + HP UX
    Thanks in advance
    Regards
    Eshwar

    Hi Sam,
    Thanks for the reply.
    Where can I select the required format type as default for all reports.
    I have checked in SPAD -> Extended Admin -> Device Types -> Format Types. But I did not find any option to set the format type as default for all reports for all users.
    Regards
    Eshwar

  • CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT =SHOW DATE

    Hello everyone.
    The version I am using oracle 11g
    2 questions:
    1 .- CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/ ora_backup / backupset /% F'; I get error
    I want the backup to show the date format, as it can get.
    2 .- CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/ ora_backup / backupset /% F_.bak';
    rename the extension back to. Bak, one can view the SQL SERVER.
    Thanks,Bye.

    %F is only vaild for controlfile autobackups, there are other elements to store the date:
    http://download.oracle.com/docs/cd/B28359_01/backup.111/b28273/rcmsubcl010.htm#i82206
    Werner

Maybe you are looking for