Spool Error - Errors occurred processing this print request

Hi,
      I have a problem printing documents through spool.
1. I run a form from Form Builder, execute and select to print from spool
2. In SP02, I select the spool request created and Select Direct Printing.
Spool request Status is changed to error and following is the error log.
I get this for all print requests from spool. When I print these documents directly, I have no problem. I understand there is some problem with the spool server but do not know what it is.
I also observed that when the spool access method is G - I have no problems in printing.
Printer: HP HP laserJet PS (2430)
Host Spool Access Method: L: Print Locally Using LP/LPR.
Device Class: Standard Printer.
SAP NW 2004s SP14
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9 is currently being printed
End of message
Command used: print /d:
bs107.platinumdb.com\HP01 D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 16151
Request name PBFORM HP01 SMULLAPUDI
Client 800
Owner SMULLAPUDI
Request attributes
Time created   2008050118454600
Remaining life +00007235918
Dispo 1 (Go/Hold) H
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device HP01
Default no. copies 1
Format G_RAW
Main print request characteristics
Spool request number 16151
Print request number 1
Print request attributes
Time created   2008050118471500
Output device HP01
Format G_RAW
Character converter active when first problem occurred
No information available
I am working on this since 4 days with no solution. Kindly help.
Thank you,
Vasu
Edited by: subbu M on May 2, 2008 11:37 PM

Hi Sri,
Try to setup the printer at OS LEVEL.
then,
If on Windows---use method C.
if not,
use method U and map to your printer queue at OS level.
Hope this resloves this issue.
Reward Pts if useful
Regards,
Malti

Similar Messages

An error occurred processing your last request. Please go back and try again.

Hi, I´m trying to set up a page in BC. Often after changing the content of site and click "update" I get the message:
An Error Occurred
An error occurred processing your last request.
Please go back and try again.
This happens e.g. when I want to change the Template for the page from one to another. Sometimes all changes are lost!
I wanted to build more sites using BC for my clients but with that error messages this would be impossible. I need a system that would work properly.

hopestew,
If still encountering this behavior best track your steps and report immediately to direct support.
http://docs.businesscatalyst.com/
The error message is quite generic and it can stem from server related issues or some odd conflict within the editor/system.
Kind regards,
-Sidney

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

The problem was solved by Apple Technical Help. The process is as flollows:
1. Open Safari
2. Menu item Safari-Reset Safari - remove all website data - reset
3. Now if you try to login on iTunes connect it will work.

An internal Error has occurred.if this persists,please contact your Discove

Hi,
I am facing Error in opening a Report in Discoverer Plus :"An internal Error has occurred.if this persists,please contact your Discoverer Manager".I am opening all the other reports its opening up but only this one causing up this pop up error.
Kindly help me as its very urgent.
Any help will be needful for me
Thanks and Regards

Have you installed AppController on the same machine with VMM?

My tv shows that I have purchased won't play. It says loading, then says authorizing then it says A error has occured loading this content. I just bought apple tv brand new. Any suggestions?

My tv shows or movies that I have purchased won't play at all. It says loading, then it comes up and says authorizing. Then it says "An error has occured loading this content." I just bought this apple tv and gone over and over pluging it in and setting it up thinking I did something wrong but I don't think it's that. Like I said I can see all my shows and movies but just can't get anything to play. Please help me. Any suggests?

This is happeningto you as well?

A network error has occured. This computer's Internet connection appears to

Hi all
I keep getting this message evertime I try to open Quicktime but I dont understand it! any ideas?!

To Apple Discussions!
The following also applies to the original poster Richard Woodger:
What type of internet connection do you have? Unknown if that could be part of the problem especially if you both have dial-up service.
Also, which browser & version were you both using? If the browser was not the latest version, update it, repair permissions & see if that stops the error.
I couldn't find anything to directly connect this error to QuickTime.
See the following Knowledge Base Articles. They may be of some help:
http://docs.info.apple.com/article.html?artnum=106796 Mac OS X: Connect to the Internet, troubleshoot your Internet connection, and set up a small network
http://docs.info.apple.com/article.html?artnum=106749 Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://docs.info.apple.com/article.html?artnum=30995 QuickTime Streaming Server: General Information
Until others chime in with troubleshooting solutions, you both may want to research this error on your own by going to the top left of this site & click on Advance Search inside the purple menu bar. In the search field of Advanced Search type in the error code A network error has occured. This computer's Internet connection appears to be online.
Good luck!

FBU Internal Job Queue Full for Synchronous Processing of Print Requests

Hello All,
We are getting a lot of errors in system log (SM21) with the
Error : FBU Internal Job Queue Full for Synchronous Processing of Print Requests
User :SAPSYS
MNO:FBU
=============================================================
Documentation for system log message FB U :
If a spool server is to process output requests in the order they were
created using multiple work processes, the processing of requests for a
particular device can only run on one work process. To do this an
internal queue (limited size) is used.
If too many requests are created for this device too quickly, the work
process may get overloaded. This is recognized when, as in this case,
the internal queue is exhausted.
This can only be solved by reducing the print load or increasing
processor performance or, if there is a connection problem to the host
spooler, by improving the transfer of data to the host spooler.
Increasing the number of spool work processes will not help, as
requests for one device can only be processed by one work process. If
processing in order of creation is not required, sequential request
processing can be deactivated (second page of device configuration in
Transaction SPAD). This allows several work processes to process
requests from the same device thus alleviating the bottleneck.
Enlarging the internal queue will only help if the overload is
temporary. If the overload is constant, a larger queue will eventually
also be overloaded.
===========================================================
Can you please tell me how to proceed.
Best Regards,
Pratyusha

Solution is here:
412065 - Incorrect output sequence of output requests
Reason and Prerequisites
The following messages appear in the developer trace (dev_trc) of the SPO processes or in the syslog:
S *** ERROR => overflow of internal job queue [rspowunx.c 788]
Syslog Message FBU:
Internal job queue for synchronous request processing of output requests full
The "request processing sequence compliance" on a spool server with several SPO processes only works provided the server-internal job queue (see Note 118057) does not overflow. The size of this request queue is prepared using the rspo/global_shm/job_list profile parameter. The default value is 50 requests. However, if more output requests arrive for the spool server than can be processed (and the internal request queue is full as a result), more SPO processes are used to process the requests (in parallel), and the output sequence of the requests is no longer guaranteed.
Solution
Increase the rspo/global_shm/job_list profile parameter to a much larger value. Unfortunately, the value actually required cannot be found by "trial and error" because this queue contains all the incoming output requests on a spool server, not just the "sequence compliant" requests. A practical lower limit for this value represents the maximum sequence-compliant output requests for the above generated output device. If, for example, 1000 documents that should be output in sequence are issued from an application program to an output device, the queue must be able to hold 1000 entries so that it does not overflow if the SPO process processes the requests at a maximum low-speed.

Err:Internal Job Queue full for synchronous processing of print requests

Hi,
We are getting a lot of errors in system log with the
error :
Internal Job Queue full for synchronous processing of print requests.
User :SAPSYS
MNO:FBU.
When we check the document in syslog it states it can be solved by reducing the print load or increasing performance or if there is a connection problem to host spooler , by improving the transfer of data to host spooler..
But not by increasing the no of spool workprocess..
I think any of the one stated cannot be implemented ..
Pls provide your valuable answers and if any of the above can be implemented from your end..
Regds,
Satyanarayana N

Hi Vamshi,
Thanks for your response but would also like to confirm how we can say that spool queue is full and what may be the Max size of spool queue..
When we say Internal queue is full does it mean spool queue...
And also when I run the TEmse consistency check it is giving some errors..
When I check Spool requests there are some waiting process,but when I check Output requests there are only 1 or 2..
Please provide me your valuable solution regd this..
Regds,
Satyanarayana N.
Regds,
Satyanarayana N.

Communication error has occurred - Canon PIXMA printer

This was driving me nuts! I tried many of the other ideas offered in these discussions, but nothing worked. Sometimes my Canon PIXMA MP640 WiFi printer would work, usually it wouldn't. I would get "A communication error has occurred" message on my MacBook Pro (Snow Leopard) and the print job would just stay in the queue until I deleted it. Most of the time I needed to re-enter the network password at the printer BEFORE EVERY PRINT JOB which was a pain because the password was 10 characters long and I could only dial in each letter one at a time.
If you are having similar trouble, before you do anything CHECK THE WIFI SIGNAL STRENGTH USING THE PRINTER MENUS! On my model, this was done by going from the Home menu to Settings->Device Settings->LAN Settings->Confirm LAN settings->Print LAN Details. If the signal strength on the printout shows less than 50%, there is too much interference from other electronics in the area (or the printer is too far from the router). In my case, the printer was in the next room, i.e., not too far from the router so I knew it had to be EM interference.
At first, my signal strength was showing 36%. Then I moved the printer into the same room as the wifi router, within 7ft and directly in line of sight of it and it went to 62%. I thought it should be much higher, so I moved the printer to within 4ft and it went to 80%. Then I unplugged the LCD TV (which was NOT turned on at any time) that was on the counter nearby, and it jumped to 90%.
After months of poking at this problem and finally resigning to the idea that the printer was broken, I tried this and now it works perfectly as long as the TV is unplugged. I plan on moving the router away from the TV so I won't have to unplug it whenever I print.
Hope this helps!

I've wrestled with this off and on with this printer ever since I got it. Just checked and my signal was at 44%. Guess that could be it!... guess I'll do some relocating of the router, boost the signal or run an ethernet line. Never though the signal being that low would cause this many print errors.
I thought is was just happening when the printer would go to sleep... or not used for a few days.
Thanks!

TS1474 What do I do when it says " an unknown error has occured with this number after (13019) while im trying to sync the iPod touch?

What do I do when this message pops up while trying to sync my iPod touch "An unkwon error has occured" followed by this number in parenthesis (13019)?

Type "13019" into the search bar at the top of this page by Support and read the resulting help articles.

An error has occurred in this script on this page - i.e 7.0

Hi All
I have what looks like a common printing error because I see it in the forum but after searching the forum and talking to Adobe for over an hour I still can't find a resolution. I can't believe users have this error every day and we have no resolution? I dont even know if it is an Adobe or Microsoft error.
It says I.E 7.0 at the top and the only possible resoltuion I saw was changing the setting in I.E under tools > internet options but I believe this just stops the error from displaying but does not actually stop the problem. If my error is in my script, i do not have any background with coding and HTML.
This errror only occurs from the hard drive when you are in HTML output and wish to print a complete chapter not an individual topic. The users have to reply yes to continue like 20-30 times to exit this error and finally print.
Please help me since my project is due in a few weeks!
Thanks
Caryn

Pete
Please help me, I am not good at editing HTML at all.
Here are 2 sample html topic pages (the beginning part) and i dont see what you are talking about:
Thanks
Caryn Drovie
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="topic-check-list" content="Ran Smart Index" />
<meta name="generator" content="Adobe RoboHelp 8" />
<title>Introduction_to_Billing</title>
<link rel="StyleSheet" href="default.css" type="text/css" />
</head>
<body>
<h1>Introduction to Billing</h1>
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="MS-HKWD" content="Payment Administration" />
<meta name="MS-HKWD" content="General Ledger" />
<meta name="MS-HKWD" content="Billing Administration" />
<meta name="MS-HKWD" content="Operating Console" />
<meta name="MS-HKWD" content="Log Out" />
<meta name="MS-HKWD" content="Login" />
<meta name="MS-HKWD" content="workflow system" />
<meta name="MS-HKWD" content="Auto/Open Hide Tree" />
<meta name="topic-check-list" content="Ran Smart Index" />
<meta name="generator" content="Adobe RoboHelp 8" />
<title>topic_titles</title>
<link rel="StyleSheet" href="default.css" type="text/css" />
</head>
<body>
<h1 style="margin-right: 14px;">Topic Titles</h1>
<h2>How to Use this Help System</h2>

Priorized Queues got an error = how to process this error?

Hello together,
i configured an priorized queue for several IDOCs. Suddenly i got an error in one queue and the queue was stopped (JCO error). The IDOCs behind the error idoc stopped also because it was an EOIO queue. after deletion of the LUW the other idocs went into the receiver system. I lost the error idoc?
How can i resolve this problem without loosing any messages / data? Is there a JOB which restart priorized queues?
what does the JCO error mean? what could be the problem that this error comes up?
many thanks
alex

Hi Alexander,
You have other option for these queue entries like Unlock the queue and refresh the queues in smq1/smq2, Execute LUW/LUWS one at a time/multi processing sometimes it works and sometimes doesnt.
JCO error is generally seen when the server is starting and ABAP instance is up and java instance of server is taking time to start up.
Thanks!

"An error has occurred loading this content check the source and try again"

I get this message about every 20 or 30 minutes in front row and have to disconnect all users and have to restart iPhoto 08. Im sharing the same library from the same external GRaid to 5 mac minis and all of them lock up at the same time. Is this an iphoto issue? Is this a case of too many users or should I create an alias in each mac mini or what?
We are using front row 2.1.6 to browse pictures from a iPhoto 08 library created in a Graid using firewire 400 through a Mac Mini running OS 10.5.6. It comes out ethernet from the mac mini to a Netgear 24 port gigabit switch which is used to share out to 5 mac minis. We have 8 other mac minis hooked into this switch but they are not used for the browsing of photos or front row in any way. These 8 mac minis are used for burning dvds. I tried to explain it as much as possible let me know if more info is needed.

Are you using Front Row to browse your pictures or just iPhoto? (iPhoto doesn't open behind Front Row in Leopard, so it's not clear to me why you'd have to restart iPhoto.)
Which version of Mac OS X are you using? Is everything up-to-date, including Mac OS X, Front Row, QuickTime and iPhoto? How is everything connected? USB? FireWire? Ethernet? Wi-Fi? What happens if you whittle down the configuration to just one Mac mini accessing the library?
-Doug

Error during print request output. l_rc = 1

Hi ,
I have a request to create on ouput device which can copy the spool request to desired location in application server. Our server is not connected to any physical server and is windows NT.
I am tring to create ACCESS TYPE 'L' with host printer name '__default'.
I am using control set to copy file at desired location on server
COPY &F <path for file to be copied>&T
File is being copied to desired location but its returing error message "Error during print request output. l_rc = 1"
Complete log is below:
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
1 file(s) copied.
End of message
Command used: COPY E:\usr\sap\D06\DVEBMGS00\data\000002934300001.D06 E:\interface\D06\
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 29343
Request name SCRIPT ZRAJ BASISADMIN
Client 220
Owner BASISADMIN
Request attributes
Time created   2008102906203900
Remaining life +00008000000
Dispo 1 (Go/Hold) G
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device ZRAJ
Default no. copies 1
Format X_PAPER
Main print request characteristics
Spool request number 29343
Print request number 1
Print request attributes
Time created   2008102906203900
Output device ZRAJ
Format X_PAPER
Character converter active when first problem occurred
No information available
Pls help.
Regards
Raj Kiran

If you have done a search with your subject line, you would have got the following [results.|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=%22errorduringprintrequestoutput.l_rc%3D1%22&cat=sdn_all]
so do a search in SCN before posting your question.
Regards
Karthik D

Spool shows error status but print was ok

I've defined some printers on SAP.
They're L type. Printers works ok, but the status at spool is always red (error). What can be the reason? Printers are located at server, computers like
name\printer_name.
Thanks
Oscar

I show you the log:
<i>
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
G:\usr\sap\PRD\DVEBMGS10\data\000003108400001.PRD is currently being printed
End of message
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout          </i>
However, print request was OK

Spool Error - Errors occurred processing this print request

Similar Messages

Maybe you are looking for