Spool Error Monitoring through CCMS not available in Standard Delivered MTE

Hi Everyone,
My Client requirement is to monitor SPOOL Errors through CCMS. But Standard Monitoring Tree Elements (MTEs) does not capture the Spool Errors .
Can anybody Please let me know , How Can I setup Spool Error Monitoring through CCMS.
Thanks & Regards
Deepak Gosain

Deepak,
Check this One...
//help.sap.com/saphelp_nw70/helpdata/en/34/658a3b15566262e10000000a11402f/content.htm]
Hope this Helps....
Happy Learning
Chander N Purna

Similar Messages

I'm running OS X 10.7.5 on my MacBook Pro. I can't get a DVD to eject. I'm getting an error message "supported disc not available". How can I get the disc to eject?

I'm running OS X 10.7.5 on my MacBook Pro. I can't get a DVD to eject. I'm getting an error message "supported disc not available" when I try to use the DVD player eject button. It also does not show up on my desk top as an icon as it normally would. How can I get the disc to eject?

see Thread
https://discussions.apple.com/thread/3996208?start=0&tstart=0
and Kappy reply

Error - Some objects are not available to your user profile...

Hello,
It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
Regards,
SS

Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
3. Click here and contact Apple.
(116137)

The usage monitor is currently not available

BT.com message...
"The usage monitor is currently not available for a small number of customers. We understand how important it is to monitor usage, and as you're not able to view the usage monitor we will not charge you for going over your usage limit this month. You don't need to do anything, we'll take care of that."
Well, finally BT's complete lack of ability to manage their core business is paying off.....can download/will download.....FANTASTIC!!!
And if you aren't affected by this and Do go over your limit...I'd complain to ofcom....you can't treat one customer one way and another a more preferential way....
Oh, and if you pay for anything more than 10MB download per month, I'd also ask for a discount......
Thank you BT...may your utter incompetence reign supreme forever....
All hail the God of failure...yes, Mr Buckley...I'm genuflecting in YOUR direction!!!

Hi Guys,
Thanks for raising this. I am sorry that you are having problems with the usage monitor. I would like to sort this out.
Can I ask that anyone having issues, Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Urgent! Error: ORA-01034 Oracle not available for Oracle10gi

I have used SQL*Plus for a while, but recently when I try to login there is this error message:
Error:
ORA-01034 ORACLE not available
ORA-27101 shared memory realm does not exist
I had search for the solution quite a while. I changed the "sqlnet.ora" from C:\OraHome_1\NETWORK\ADMIN
I changed SQLNET.AUTHENTICATION_SERVICES=NT; to SQLNET.AUTHENTICATION_SERVICES=NONE and then reboot the machine.
The weird thing is that sometimes it works after I reboot the machine, but recently this just doesn't work any more. The SQL*Plus generates the same error message as I wrote above.
It seems like this kind of problem has troubled lots of oracle database users. IS this a bug that exists in the Oracle10gi?
Or does Oracle10gi require to run on certain operating system platform like Windows XP Professional but does not support for Windows XP Home Edition?
Can the Oracle company provide some error solution guide for the public for their own system?
many thanks

No this specific error message is not a result of an Oracle bug to my knowledge.
In my experience it is a simple matter of not using Oracle correctly. Only it is not that simple from a pure end-user perspective as Oracle is not a mickey mouse little filing system that pretends to be a database (like MS Access).
Which makes sense. After all, driving a bicycle does not mean one is able to get on a superbike. And if you respond "what!! why is it a superbike!?" then you need a bicycle in the first place.
The cause of the error you list - the client is making a local IPC dedicated server connection to the Oracle instance. This fails as the dedicated server cannot find the Oracle SGA (shared memory area) to attached to. This is usually the result of
a) the Oracle instance is down (and thus the SGA does not exist)
b) the ORACLE_SID used by the client is incorrect (and thus it attempts to attach to a non-existant SGA)
Reason (a) could be caused by some underlaying issue that results in the Oracle instance shutting down automatically or unintentionally.
As for what Oracle 10G requires operating system wise. There are detailed platform certification matrixes on the Oracle web site. In addition, the INSTALLATION notes of Oracle also specifies what platforms are supported.
You also fail to mention the exact Oracle product you're running. Oracle XE is different than Oracle Standard Edition which is different than Oracle Enterprise Edition.
There is btw a dedicated support forum here for Oracle XE - and this one ain't it.

Error 8201 (Database version not available) during ODatabase() in VC++

Hello all,
I'm Beginner and i think i have a stupid problem,
when i execute under VC++ V6 SP5 (and IE 5.5 SP2) Under W98se :
OStartup();
ODatabase odb("essai","SYSTEM","manager"); // 'essai' is an existing database, no problem with sql*plus
if (!odb.IsOpen()) {
long err = odb.ErrorNumber();
char chaine[100];
sprintf(chaine,"Error n0=%ld",err);
::MessageBox(0,chaine,"DataBase",0);
Displaying 'Error n08201' : 'Database version not available' ???
PLEASE, THIS PROBLEM TURN ON MY MIND DURING ALL THIS WEEK-END AND I TEST, I RELEASE, I SEARCHE, AND NOTING...

My Reponse from My Question :
It was so easy to run 'lsnrctl start'.
(Listen Module Manager).
2 days to find this.
VB doesn't work anymore.
I've executed an pre-compiled example 'login.exe' which display --> 'No Listen Module'.
Bye All.

Error: Qeue 2LIS_03_BF is not available in the source system

Dear Experts,
While scheduling 2LIS_03_BF. It displyed following error.
Error : Queue 2LIS_03_BF is not available in the source system
What could be the problem,
Please help me to resolve this issue.
Regards,
Khader,

Hi Mansi & Sujatha,
I am also facing the same problem, in RSA7 status of 2LIS_03_BF is in red.
Please suggest how could I proceed further.
Regards,
Venkat.

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

Try -
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
3014
Restoration of code 3014 will not work?: Apple Support Communities

Need help on this errors : ORA-01034: ORACLE not available and ORA-27101

Hi,
I installed 11gR2 on win xp in vmware workstation.It was running without any problems.Few times I Closed the vmware application explicitly.
Now when I tried to connect oracle It is showing the following message.
Enter user-name: scott
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0
Please help me to resolve this .

Thanks for your response.When I tried to start oracle results are:
SQL> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size                  1375792 bytes
Variable Size             381682128 bytes
Database Buffers          146800640 bytes
Redo Buffers                5804032 bytes
ORA-03113: end-of-file on communication channel
Process ID: 2884
Session ID: 1 Serial number: 3
When I checked in enterprise manager it is showing the following information.
Agent Connection to Instance
Status     Failed
Details     ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
Thanks for your help.

When I try to access iTunes Store I get an error message stating feature not available in the uk store

when I try to access iTunes Store I get an error message stating feature not available in the uk store

Exact same thing is happening to me. Couldn't find where to view the Itunes version number after a quick look. I hate the "simplified" interface by the way. On windows 8.1. Really starting to hate itunes, very buggy, and apple device locked down content (I'm looking at you TV shows and Movies) make it a pain to use.

DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

Hi All,
I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
Thanks & Regards,
Arya

Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

Enabled monitor through override not visible in custom management pack

Hello Everyone,
I've this requirement to enable a monitor which is disabled by default in its source sealed management pack. Using following article; via override; I enable the monitor and place it into a custom unsealed management pack.
https://technet.microsoft.com/en-au/library/hh212818.aspx
Now when I try creating subscription based on that monitor; and select the custom unsealed management pack; that monitor is not listed/available. However, this same monitor which is turned enabled by override; is listed; if its parent sealed management pack
is selected.
Questions:
1) Would selecting this monitor from its sealed management pack; safe to assume this monitor is now enabled?
2) Is this default behavior for monitors turned enabled via override?
Please provide input to this, how an enabled monitor through override can be referenced to be used? Thank you.

1) If the override is done properly, yes, it is enabled. You can check that it is actually enabled by opening the health explorer of an object targeted by this monitor : it should be green/yellow/red instead of blank when it was disabled
2) It is the default behavior. What happens is that you store the override (just a parameter that says "ok, the monitor is now enabled") in the unsealed management pack, not a copy of the actual monitor.

Error Parsing Feed XML error and Item requested not available in US Store

Here is my feed:
http://www.fccetown.com/mp3/podcastfeed/podcast.xml
It validates with no errors through the Feed Validator, however when I submit the podcast I
receive the following error:
Error parsing feed: Invalid XML : Error on line 86: The element type "link" must be terminated by the matching end-tag "</link"
I defined the link like this so I do not understand:
<link>http://www.fccetown.com</link>
I also tested the feed by Subscribing to the podcast and when I click on the link to the podcast from our web page I get the following but the proper feed is displayed:
Item Not Displayed
The Item You Requested is not available in the US Store.
I set the language tag like this so I do not understand:
<language>en-us</language>
This is the link on our webpage to the podcast:
https://itunes.apple.com/us/podcast/first-christian-church-elizabethtown/id26114 0517
When I try to search from the Podcast Store with First Christian Church - Elizabethtown
it returns the following episode:
<item>
<title>A View from the Throne</title>
<description>
</description>
<pubDate>Sun, 05 Oct 2008 09:00:19 -0400</pubDate>
<enclosure url="http://fccetown.com/mp3/20081005StuartJonesTheViewfromtheThrone.mp3" length="14333072" type="audio/mpeg" />
<guid isPermaLink="false">a-view-from-the-throne</guid>
<itunes:author>Stuart Jones</itunes:author>
<itunes:explicit>no</itunes:explicit>
<itunes:duration>29:51</itunes:duration>
</item>
If you can explain that one please let me know.
I am confused by all of these errors.
Please let me know how to proceed.
Thanks,
Don Hobbs

You give two feed URLs: in neither case is there a file present on the server. You say you changed the feed: did you place the 'itunes:new-feed-url' tag in the old feed to redirect iTunes? In any case since there is no file present in either case the Store would be unable to read the feed and your podcast appears to have been removed from the Store as a consequence.
You will now need to start again from scratch: once you have a working feed you will have to submit it as an entirely new podcast. You will need to change the title slightly or you will be told it has already been submitted.
Before submitting you should check that your feed works by subscribing to it manually in iTunes, from the File menu in v11 or the Advanced menu in earlier versions.

Outlook 2010 - Move to public folder brings an error "the folder is not available"

Hi
we have exchange 2010 SP3 in our organization
clients use both 2010 SP2 \ 2013 outlooks
when moving an item from the mailbox to a public folder directory the item moves successfully, and the directory is added to the recent directories under the "Move" button.
then, when I try to move another item to a public folder directory from the dropdown recent list I get the error message:
"The folder is not available"
obviously it's available as I can do the same action manually. it happens on Outlook 2010, Outlook 2010 SP2 and Outlook 2013
for all the users
so it's not a profile or a user's issue
I saw many posts with the same error but they mostly talk about pst files and the solution is the kb
2405793‎ which is already included in SP2 + out users don't use pst. everything is in exchange
hope to get some answers before I open support case at MS
Tamir Levy

Hi Tamir Levy,
From your description, when you drag an item to public folder, it is successful. When you use the "Move" button to move an item to public folder, it occurred the above error. If I have misunderstood your concern, please let me know.
I recommend you check if the issue also exists via OWA. If the issue doesn't occur when you use OWA, please verify if the issue happens on Outlook online mode or in cached mode.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Spool Error Monitoring through CCMS not available in Standard Delivered MTE

Similar Messages

Maybe you are looking for