Spool File not complete when spool recipient recieves email

Hi,
This is my Issue...
We scheduled one of the Std SAP report (RLS10020/LX02). When defining the job, we have also specified a spool recipient and once the job was completed, the recipient got the spool as a html file. The spool actually had 15000 line items, but the html file received in the email had only 900 (file size ~1.5 mb).
When the spool is manually exported as a html file in the local m/c, it had the complete data of 15000 line items (file size of 26mb).
Any information on why the file from email is truncated would be appreciated.
Thanks in Advance..
Karthik

OSS note 329537 has solved my problem..

Similar Messages

Jpg and gif files not showing up on recipient's email

When I attach photos on an email sent from whichever email address through my Mail Application (the one that comes with all Mac OS), sometimes people using AOL or other mail servers don't even see the files. Usually, I think all the problems are with jpg, pdf, and gif files and not .doc files or any text files. they seem to see the text files without any problems. So then Im forced to go to my gmail through safari and attach one by one. Honestly, I find the click and drag en masse of the files I want as attachments much easier, but I want to know how and what is the reason that some servers continuously cannot see my files. Sometimes they see the files as I attach them, meaning as photos on the actual email. And they get confused and don't know how to download them because they say that on the email application they use (gmail for example) there is nowhere where it says download attachments. What is going on and what can I do on my mail application to change this. its really frustrating because my work makes me email lots of photos and sometimes this problem is extremely cumbersome and annoying

Some email readers have trouble with enclosures (particularly graphics) from within an email that is formatted as Rich Text. If you format your mail as Plain Text (see the Format menu) then I expect they will see the enclosures.

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

I downloaded 9 songs and 2 of them are not complete when I play my IPOD they play 3/4's then end., I downloaded 9 songs and 2 of them are not complete when I play my IPOD they play 3/4's then end.

I dowloaded 9 songs and 2 of them are not not complete when I play them on my IPOD Classic the songs play then 3/4's of the way they end.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Are .mp4 files not supported when trying to merge 2 videos into 1 video?

Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Compress the file in Background when sending as an email.

Hi All,
Is there any way to compress the file in Background when sending as an email.
Thanks in advance

I haven't been able to find a solution to this so I am either going to incorporate my data into the body of an email or look at an http post solution...

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

Hyper-v Live Migration not completing when using VM with large RAM

hi,
i have a two node server 2012 R2 cluster hyper-v which uses 100GB CSV, and 128GB RAM across 2 physical CPU's (approx 7.1GB used when the VM is not booted), and 1 VM running windows 7 which has 64GB RAM assigned, the VHD size is around 21GB and the BIN file
is 64GB (by the way do we have to have that, can we get rid of the BIN file?).
NUMA is enabled on both servers, when I attempt to live migrate i get event 1155 in the cluster events, the LM starts and gets into 60 something % but then fails. the event details are "The pending move for the role 'New Virtual Machine' did not complete."
however, when i lower the amount of RAM assigned to the VM to around 56GB (56+7 = 63GB) the LM seems to work, any amount of RAM below this allows LM to succeed, but it seems if the total used RAM from the physical server (including that used for the
VMs) is 64GB or above, the LM fails.... coincidence since the server has 64GB per CPU.....
why would this be?
many thanks
Steve

Hi,
I turned NUMA spanning off on both servers in the cluster - I assigned 62 GB, 64GB and 88GB and each time the VM started up no problems. with 62GB LM completed, but I cant get LM to complete with 64GB+.
my server is a HP DL380 G8, it has the latest BIOS (I just updated it today as it was a couple of months behind), i cant see any settings in BIOS relating to NUMA so i'm guessing it is enabled and cant be changed.
if i run the cmdlt as admin I get ProcessorsAvailability : {0, 0, 0, 0...}
if i run it as standard user i get ProcessorsAvailability
my memory and CPU config are as follows, hyper-threading is enabled for the CPU but I dont
think that would make a difference?
Processor 1 1 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 1 4 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 1 9 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 1 12 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 1 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 4 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 9 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor 2 12 Good, In Use Yes 713756-081 DIMM DDR3 16384 MB 1600 MHz 1.35 V 2 Synchronous
Processor Name
Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
Processor Status
OK
Processor Speed
2400 MHz
Execution Technology
12/12 cores; 24 threads
Memory Technology
64-bit Capable
Internal L1 cache
384 KB
Internal L2 cache
3072 KB
Internal L3 cache
30720 KB
Processor 2
Processor Name
Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz
Processor Status
OK
Processor Speed
2400 MHz
Execution Technology
12/12 cores; 24 threads
Memory Technology
64-bit Capable
Internal L1 cache
384 KB
Internal L2 cache
3072 KB
Internal L3 cache
30720 KB
thanks
Steve

Getting Message as "File not open", when I ran background Job

Hi,
I developed a Migration Program, Which reads the data from Application serever and procced with further process in back ground mode.
Same program is workind fine in Development System in Back ground mode (SY-BATCH = 'X', Scheduled a batch Job). So I transported to Quality system.
Now When I run the program in background mode (SY-BATCH = 'X', Scheduled a batch Job), getting Message as "File is not Open" at Quality system. So I debugged the Batch job through "JDBG", and found file opening and reading the content sucessfully.
But its not working without debugging mode and getting message as "File not open".
Is there any Authorizations required for background mode (without debugging).
So can you please help me on this how to solve this issue.

Try this code:
DATA: PATH_NAME(80) TYPE C,
 LV_FILENAME TYPE STRING.
DATA: LW_XSTRING TYPE XSTRING,
 X_LEN TYPE I.
DATA: FILE_AUTH_ERR TYPE REF TO CX_SY_FILE_AUTHORITY,
 FILE_OPEN_ERR TYPE REF TO CX_SY_FILE_OPEN,
 FILE_OPEN_MODE_ERR TYPE REF TO CX_SY_FILE_OPEN_MODE,
 FILE_CLOSE_ERR TYPE REF TO CX_SY_FILE_CLOSE,
 FILE_CONVERSION_ERR TYPE REF TO CX_SY_CONVERSION_CODEPAGE,
 FILE_TOO_MANY_ERR TYPE REF TO CX_SY_TOO_MANY_FILES,
 MESS TYPE STRING,
 W_TEXT TYPE STRING.
DATA: L_RC TYPE INT4.
concatenate pathname lv_filename into lv_filename.
TRY.
 OPEN DATASET LV_FILENAME FOR INPUT IN BINARY MODE MESSAGE MESS.
 CATCH CX_SY_FILE_OPEN_MODE INTO FILE_OPEN_MODE_ERR.
 W_TEXT = FILE_OPEN_MODE_ERR->GET_TEXT( ).
 L_RC = 1.
 CATCH CX_SY_FILE_AUTHORITY INTO FILE_AUTH_ERR.
 W_TEXT = FILE_AUTH_ERR->GET_TEXT( ).
 L_RC = 2.
 CATCH CX_SY_CONVERSION_CODEPAGE INTO FILE_CONVERSION_ERR.
 L_RC = 3.
 W_TEXT = FILE_CONVERSION_ERR->GET_TEXT( ).
 CATCH CX_SY_TOO_MANY_FILES INTO FILE_TOO_MANY_ERR.
 L_RC = 4.
 W_TEXT = FILE_TOO_MANY_ERR->GET_TEXT( ).
 CATCH CX_SY_FILE_OPEN INTO FILE_OPEN_ERR. "File already open
 L_RC = 5.
 W_TEXT = FILE_OPEN_ERR->GET_TEXT( ).
ENDTRY.
IF L_RC = 0.
 L_RC = SY-SUBRC.
ENDIF.
IF L_RC <> 0 OR SY-SUBRC NE 0.
Issue Error message in open file.
 CONCATENATE MESS 'Open dataset failed' w_text INTO MESS SEPARATED BY SPACE.
 message Exx(yyy) with mess.
 ELSE. "file exists and can be opened
ENDIF.

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

File not found when trying to call a dll on LabVIEW Real Time machine

I have a dll called "DLLRTTEST" that I've written, and have succesfully called on my host machine. I'm now attempting to call this dll from a vi that is located on my real time computer. Currently I get an "Error 7 occurred at Call Library Function Node in DLLRTTEST.vi." message upon execution
In the attached screenshot I'm trying to ensure that the vi I'm running is in fact located on the real time system. I then use a "Check if File or Folder Exists.vi" to confirm that the dll that I'm about to call does exist on the real time system as well. However, I still receive an "error 7 file not found" error from the Call Library Function Node.
Any help is appreciated.
Solved!
Go to Solution.
Attachments:
DLL_Call_Screenshot.png ‏61 KB
DLL_Call_Screenshot.png ‏61 KB

As nathand already mentioned, depending on your C toolchain your DLL will depend on other DLLs. Usually the according msvcrtXX.dll that matches your Visual C version, if you use Visual C, other runtime DLLs if you use a different C environment. These runtime DLLs are even necessary if you do not call anything in any of your functions, since the DLL makes various initialization steps when it gets loaded and that references some C runtime functions nevertheless. Compiling and linking the DLL with static C runtime is usually also not a clean solution since the linked in C runtime will then reference Windows APIs that are not available on LabVIEW RT.
Depending on your version of LabVIEW RT you will have some mscvrtxx.dll files in your system directory but it will be an older one than from the latest Visual Studio version. If you can compile your DLL with that Visual Studio version then you should be fine, but could possibly run into new problems if you later upgrade to a newer LabVIEW RT version. Installing the C runtime distributables from newer Visual Studio versions is unfortunately also not a solution, since it references many (undocumented) Windows API functions that are not available in LabVIEW RT.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I stop Firefox from opening (to "File Not Found") when opening my Opera browser?

Ever since I installed Opera 10.61 on my new computer (Windows 7 Ultimate operating system), whenever I open Opera, Firefox opens one second later with the following error message:
'''File not found '''
Firefox can't find the file at /C:/Users/Nasheed/AppData/Local/Opera/Opera/temporary_downloads/client-en.xml.
* Check the file name for capitalization or other typing errors.
* Check to see if the file was moved, renamed or deleted.
TRY AGAIN.
<nowiki>****************************************************</nowiki> 
This happens EVERY TIME I OPEN THE OPERA BROWSER. How can I stop this from happening? I'm stumped.
[EXTRA INFO - I was unable to enable Firefox to access my previous profile on the new computer (despite putting the old profile in the appropriate Mozilla Firefox folder. So, there are now two profiles in that location.
After reading the answer to another forum member's question, I attempted to resolve the problem using Profile Manager, but I was unable to locate the Profile Manager. The Windows "Search" feature is not enabled on my new computer (nor can it be enabled from the Customize Start Menu options).]

Thank you for your response, Cor-el.
I had Opera set as my default browser since this began happening. I changed my default browser back to Firefox mainly because having Firefox open one or two seconds every time I open Opera was/is such a nuisance.
I believe this problem began because I attempted to manually transfer the files from my old computer to the new one (via the backed up files in my external drive). I was unfamiliar with Windows 7 when I did this. Microsoft changed the file set up from what I had been used to in Windows XP. I used XP for six years before being exposed to Windows 7 (I never had Vista).
I'm almost sure this problem has something to do with where I placed the application data when I was trying to reestablish the program set up on the new computer.

File Not Found when calling a Servlet in Portal

We've developed a JSP/servlet application within JDeveloper 9.0.3 also using the Portal add-in.
Upon submission of form within the JSP, a servlet is called using a url based servlet mapping. Everything works great in Jdeveloper, but once we deploy to the app server through OEM and try to submit the form on the JSP (through a basic submit button), we get a 404 File Not Found error.
All of the code is set up in the basic j2ee structure. (I think) DrugInter is the name of the provider and the application.
applications/DrugInter/DrugInter/WEB-INF/classes/src/com/whatever/ServletName.class
Our web.xml has the correct servlet name and mapping to this servlet. I'm assuming this is the case only because everything works fine within JDev.
Any ideas?
Thanks!
Teri Kemple

I think I found the problem. I am using Illustrator CS5 (15.0.02) running on MacOS (10.7.5).
In my script, Folder.selectDialog function was returning "file:///Users/alex/Apps/temp", when I selected the temp folder from the dialog box. I want the function to return "/Users/alex/Apps/temp". If I hardcode the path (as shown below), the javascript runs fine.
// Select the source folder.
//sourceFolder = Folder.selectDialog( 'Select the folder with Illustrator files', '~' );
sourceFolder = Folder("/Users/alex/Apps/temp");

Spool File not complete when spool recipient recieves email

Similar Messages

Maybe you are looking for