SPOOL_INTERNAL_ERROR (334  Runtime Errors today)

Hello Everybody,
Everyday in our Quality server we are getting some around 300 +  SPOOL_INTERNAL_ERROR short dumps.
===============================================================
Runtime Errors         SPOOL_INTERNAL_ERROR
Date and Time          08.05.2009 23:45:57
ShrtText
     Internal error in the spool system.
What happened?
     The current ABAP program had to be terminated because the
     ABAP processor detected an internal system error.
     The current ABAP program "BAE_GET_STATUS_2" had to be terminated because the
      ABAP
     processor discovered an invalid system state.
What can you do?
     Make a note of the actions and input which caused the error.
     To resolve the problem, contact your SAP system administrator.
     You can use transaction ST22 (ABAP Dump Analysis) to view and administer
     termination messages, especially those beyond their normal deletion
     date.
Error analysis
    When calling the SAP spool system, an (unspecified) internal
    error occurred.
    More detailed description of error: "spool overflow "
    Further information:
    See below under "Spool error information".
======================================================
Please let me know how to proceed.
Thanks in advance
Best Regards,
Pratyusha
Edited by: Pratyusha on May 8, 2009 11:58 PM
Edited by: Pratyusha on May 8, 2009 11:59 PM
Edited by: Pratyusha on May 8, 2009 11:59 PM

Hi,
From the dump, it seems that Your spool count is full.
Please delete the old spools from the system by running report RSPO1041 report and after that your system should return to normal.
With Regards,
Saurabh

Similar Messages

  • Runtime Errors         CONVT_NO_NUMBER

    Hi Experts,
    we got a runtime error in program CONVT_NO_NUMBER ,here are the details of the error ,could not find a sap note on this.
    same program is ran with same variant recently  but got this runtime error today ,please suggest how to correct this
    The termination occurred in the ABAP program "/SAPAPO/SAPLMSDP_CAP" in
      "PROD_LIST_RESULT".
    The main program was "/SAPAPO/RMSDPCAP ".
    The termination occurred in line 1078 of the source code of the (Include)
      program "/SAPAPO/LMSDP_CAPF02"
    of the source code of program "/SAPAPO/LMSDP_CAPF02" (when calling the editor
      10780).
    The program "/SAPAPO/SAPLMSDP_CAP" was started as a background job.
    Processing was terminated because the exception "CX_SY_CONVERSION_NO_NUMBER"
      occurred in the
    procedure "PROD_LIST_RESULT" "(FORM)" but was not handled locally, not declared
      in the
    RAISING clause of the procedure.
    The procedure is in the program "/SAPAPO/SAPLMSDP_CAP ". Its source code starts
      in line 1001
    of the (Include) program "/SAPAPO/LMSDP_CAPF02 ".
    Error analysis
        An exception occurred. This exception is dealt with in more detail below
        . The exception, which is assigned to the class 'CX_SY_CONVERSION_NO_NUMBER',
         was neither
        caught nor passed along using a RAISING clause, in the procedure
         "PROD_LIST_RESULT" "(FORM)"
        Since the caller of the procedure could not have expected this exception
         to occur, the running program was terminated.
        The reason for the exception is:
        The program attempted to interpret the value "*08" as a number, but
        since the value contravenes the rules for correct number formats,
        this was not possible.
    Thanks in Advance.
    Edited by: Brahamananda reddy Arikatla on Aug 23, 2010 7:05 AM

    Hi
    "*08
    1. I think this is some chararater that you have declared and the value is shooting to bypass the length. It is not able to handle the
    value and a * is in place.
    declare with appropriate data type by int or quan.. or char(xx) length to handle this.
    SInce this is dealing with some background job its not clear loading of the data type . But u you can place the breakpoint at the code of line mentioned and observe the value .
    2.
    if u r doing a char comparision then see that RHS is in quotes .
    Ex : ZB eq 11 will go for a dump
    ZB eq '11' - > no dump
    BR,
    Vijay

  • Runtime errors SPOOL_INTERNAL_ERROR

    Hello Friends,
    Kindly Help me to silve this Issue, here in this issue their is no error in the source code, but still job is not canceled.
    Runtime errors         SPOOL_INTERNAL_ERROR
    Internal error in the spool system.
    <<dump error message removed by moderator>>
    Moderator Message: Provide enough information as to when you are getting this error.
    Thanking You,
    Rahul Asthana.
    Edited by: kishan P on Aug 5, 2011 11:04 AM

    Hello Kishan,
    Actually I am not getting where the problem is because source code is proper and after reading the dump I thought their a problem in the system and I confuse so while posting the error I mention the dump for easy understanding for others who help me to solve the issue. Kindly Help me to solve the issue.
    Thanking You,
    Rahul Asthana

  • I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C  C  runtime error. I can open the organizer but not the editor

    I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C  C  runtime error. I can open the organizer but not the editor

    I'm keen to know if you get a response to this.  I've been running Elements 12 for a year now, and suddenly my Editor is not working.  I'm running Windows 8.1 and just get a message that says "The Editor is not working".    Not very helpful.

  • Can't execute PSE 10 today...giving me a runtime error and shuts down.

    I have been using this program successfully for sometime but today program won't open because of a runtime error.  I have read some of the posts but they are too complicated for me to understand.  I need a clear answer on how to resolve this. 

    There is another way to remove preferences.
    Go to location "C:\Users\[User]\AppData\Roaming\Adobe\Photoshop Elements" and delete the 10.0 folder there. Please make sure that "Appdata" is hidden folder so you have change the folder visible permission from controlpanel in case you don't see the appdata folder.
    Hope this might help.

  • Hollie**it! I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit.  I tried to update iTunes twice today.  This is what I get:     Runtime error!     Program: C:\Program Files (x86)\iTunes\iTunes.exe     R6034  An application has made an

    Hollie**it!
    I can't even open iTunes anymore.I have Windows 7 Home Premium 64 Bit.  I tried to update iTunes Trice Now.  This is what I get: Runtime error!     Program: C:\Program Files (x86)\iTunes\iTunes.exe.   R6034  An application has made an

    Hello there, Vinnie.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Runtime error while executing rule

    Hello All,
      While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
      For this source is another Cube, where im loading the data from Cube to Cube.
    Error Description are as follows:-
    Error Location: Object Type    TRFN
    Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
    Error Location: Operation Type ROUTINE
    Error Location: Operation Name
    Error Location: Operation ID   00034 0000
    Error Severity                 100
    Original Record: Segment       0001
    Original Record: Number        557
    and Also descripton is :-
    Diagnosis
        An error occurred while executing a transformation rule:
        The exact error message is:
        Division by zero
        The error was triggered at the following point in the program
        GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
    System Response
        Processing the data record has been terminated.
    Procedure
    The following additional information is included in the higher-level
    node of the monitor:
       Transformation ID
       Data record number of the source record
       Number and name of the rule which produced the error
    Let me know ur valuable suggestions on these error...
    thanks.

    Hello,
    I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
    Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
    thanks,
    srinivas.

  • Could someone help me with a Runtime Error while saving a PDF file?

    While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
    Thank you for any insight.
    Pam

    It is a 13.5x11 inch calendar. There are 14 pages with images on them and
    some text. The other pages have text, a grid and a colored background with a
    gaussian blur. I saved each page as an "outline".
    The printer I am using requested I save all pages in a pdf file. I was
    successful in saving all but about six pages, now I can't even open the
    file.
    What happens is... I open Illustrator
                                   I open the pdf file
                                   A window appears that says... Runtime Error,
    This application has requested the Runtime to terminate it in an unusual
    way. Please contact the application's support team for more information.
                                   I select ok
                                   then a window appears that says... Adobe
    Illustrator CS5 has stopped working. A problem caused the program to stop
    working correctly. Windows will close the program and notify you if a
    solution is available.
                                   Then the program closes.
    So far I have not been notified of anything.
    Please let me know if you need more details.
    Thank you so much for helping me with this.
    Pam

  • WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

    hi to all experts,
    whenever i try to delete a particular sale order im getting a runtime error
    stating that
    Short text
        Screen: Illegal message
    What happened?
        The current screen processing action was terminated since a situat
        occurred where the application could not continue.
        This is probably due to an error in the ABAP program or in the cur
        screen.
    Error analysis
        The program attempted to issue a " " message during "Exit Command" processing.
        This is an illegal operation.
        The program was terminated.
        Screen name.............. "SAPMV45A"
        Screen number............ 4001
    Trigger Location of Runtime Error
        Program                                 SAPMV45A
        Include                                 MV45AFZZ
        Row                                     370
        Module type                             (FORM)
        Module Name                             USEREXIT_SAVE_DOCUMENT
    SourceCde
                  message e001(zm) WITH text-335 ltab-kunnr text-334.
                else.
                  if ktab-jkunnr <> ltab-kunnr.
                    ktab-jkunnr = ltab-kunnr.
                    jobsitecode = ltab-kunnr.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                    EXPORTING
                      input  = jobsitecode
                      IMPORTING
                      output = jobsitecode.
                    SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                    IF sy-subrc = 0.
                      ktab-jname1 = kna1-name1.
                      ktab-jstras = kna1-stras.
                    ENDIF.
                    chg_flg = 'X'.
                  endif.
                endif.
              else.
                message e001(zm) WITH text-336.
    * Validation for relationship between Sold-to Party and Ship-to Party
    *          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
    *            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
    *          endif.
              custcode1 = ktab-ckunnr.
              CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input  = custcode1
                IMPORTING
                  output = custcode1.
              jobsitecode1 = ktab-jkunnr.
              CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input  = jobsitecode1
                IMPORTING
                  output = jobsitecode1.
              SELECT SINGLE * FROM knvp
              WHERE kunnr = custcode1
                AND vkorg = vbak-vkorg
                AND vtweg = vbak-vtweg
                AND spart = vbak-spart
                AND parvw = 'WE'
    Error analysis
        The program attempted to issue a " " message during "Exit Command"
        This is an illegal operation.
        The program was terminated.
        Screen name.............. "SAPMV45A"
        Screen number............ 4001
    Trigger Location of Runtime Error
        Program                                 SAPMV45A
        Include                                 MV45AFZZ
        Row                                     370
        Module type                             (FORM)
        Module Name                             USEREXIT_SAVE_DOCUMENT

    Hi,
    Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
    Put a breakpoint and see.
    Regards,
    Nagaraj

  • Runtime Error when starting Lightroom

    I'm currently on day 12 or so of my trial with Lightroom. I've spent quite a few hours getting to know LR by retouching and cataloging over 8 years of photos. So far, aside from a few in-program bugs that I found a way to work around, I've been super-happy with it (especially the powerful keywording/metatagging system: amazing!) and have been really seriously coughing up the huge wad of $$ when the trial's done. But....
    For no reason, LR started giving me a Runtime Error when I tried to start it. Something along the lines of "This application requested Runtime to terminate it unusually."
    So off to Google I went, where I knew I could probably search that error and fix it like I've done with countless other programs. Unfortunately nothing is working.
    Here are the facts:
    --I'm running a fully patched Vista machine.
    --LR worked fine earlier this morning. I had 1.4 and didn't perform any upgrades or maintenance to it (that I know of) when it just gave me the error out of the blue today when I tried to start it.
    --I tried holding CTRL when I start it, and it still gives the error.
    --I tried deleting a .lock file (which did exist) but it still wouldn't start.
    --I tried running the "repair" tool in the install...no good.
    --I uninstalled LR, d/led it again, and re-installed it. IT WORKED!....one time. I was able to run it, checked to make sure my cataloging was still intact (it was - phew!) and even deleted a folder I didn't want in it. Then I closed it. I tried re-opening it a few hours later and I got the SAME ERROR!
    I sure hope someone can help because I'm at my wit's end.

    This is disgusting. I've pounded away for over 4 hours and I finally found a workaround. Here's the original post that had my answer:
    http://www.adobeforums.com/webx/.3c05ac2f
    The short of the story: if I put lightroom.exe into Windows XP compatibility mode" it will work. (To do that, for anyone else who comes across this, you just right-click your lightroom icon, click PROPERTIES, and go to the Compatibility tab and check the box next to "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 2)")
    I've loaded it up half a dozen times and it's still working perfectly as far as I can tell. Hopefully it won't hurt anything keeping it in that mode.
    I'm glad this happened early enough into my trial that I'll have ample opportunity to see if it repeats itself. I'm not keen on sinking $300 into software that will give me ulcers as I troubleshoot problems like this.

  • Any one else have Microsoft C++ runtime error in Adobe Photoshop Elements 11 (non cloud version)

    I have been using Adobe Photoshop Elements 11 for 9 months successfully with no issues.  Last night, for no reason, it stopped working , giving me a Microsoft C++ runtime error.  I have tried every trouble shooting suggestion, including resetting the computer, deleting recent updates, disk cleanup, etc.  I finally un installed the program, and when I attempted to re-install, it got almost to the end of the install, and then I get a message " The installation process encountered an error using Shared Technologies".   Can anyone help me?  Technical support for store bought copies of this program is non existant.  It took me 2 hours to find a  phone number that works and that was only for cloud users, and the only support they offer is a chat room , which disappeard from my screen this morning, and is no being offered at least today.   I must have this program for my photography classes I take 2 x a week.  Please help!

    Moving this discussion to the Photoshop Elements forum.

  • HT203175 I have no problem signing on to iTunes my issue is once on the site I can not use the "search". It says there is a runtime error R6025 pure virtual function call. Has anyone had this problem and how do I fix it. Thanks

    I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks

    Thanks so much for your feedback. I really appreciate any input here.
    If someone from Adobe could GUARANTEE that this problem would go away if I
    purchased CS4, I would pony up the cash and do it. However, I'm skeptical
    about that because I just saw someone else post a message on the forum today
    who is running CS4 and getting the exact same runtime error as me.
    I'll try un-installing and re-installing as Admin, and if that doesn't work,
    maybe I can find a used copy of CS3.
    In the meantime, I'm also wondering if a Photoshop file can carry any sort
    of corrupt metadata inside it once it has errored out? Reason I ask is, I
    had to port all of my old PSD files to the new computer, and I only seem to
    be getting this error when I attempt to work on one of the files that
    previously got the runtime error when they were sitting on my XP machine.
    When I create new files from scratch on this new computer, they seem to be
    working just fine (at least, for now).
    If so, I would probably be smart to never open those troublesome
    "errored-out" files again.

  • Getting Runtime error while executing Query on Multiprovider

    Hi ALL,
    When i m executing a query on multiprovider it is giving me runtime error as:
    *Error Reading the data of the infoprovider
    An Exception with the type CX_SY_ARITHMATIC_OVERFLOW occured
    overflow in the operation.*
    I ran this query today morning also it ran successfully, now it is giving this error.
    Please help me.
    Thank you.
    REDDY

    Hi check
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/sapsys-000-compute_int_times_overflow-cx_sy_arithmetic_overflow-1704462
    Thanks
    Reddy

  • Runtime Error in File Preview of RH7 - Immediate help needed!

    Dear all,
    we're working on a RoboHelp 7 project under version control.
    Today we encountered a major issue with ur project/database. When opening files in the preview window, they are displayed without error. As soon you click on a link within this file that leads to another HTML file, you get a pop-up with a runtime error message. You're asked either to debug or not. Selecting no displays a second runtime error with the same question. After also declining, you get to the selected HTML file.
    We have two major sorts of files: Chapter overview pages and topic files. Both are based on the same Style Sheet (CSS) and template. For the overview files the layout is just changed a bit when you create the file. Further there are some extra files don't use the template.
    Now I recognized some kind of logic:
    - When you open an overview-file, the two pop-ups always refer to runtime errors in line 46 and 49.
    - When you open a topic file, the two pop-ups always refer to runtime errors in line 50 and 53.
    - When you open a file that is blank and not based on the template, there's no error.
    Until now, the error never occured. But since today (or maybe last week und we didn't recognize), this error comes up even for files that were created months ago and never had an error before. They were changed today automatically when a renamed a chapter. Even within our "clean and working" backups we now encounter this error.
    Questions:
    - Can anyone explain, what a runtime error is at all?
    - My assumption is, that it has something to do with the CSS or template, but I'm not sure. What can be wrong there?
    - To what lines do the specifications in the pop-up refer to? Where can I find those lines?
    As we are in a very critical project phase, I really need your assistance for a quick and effective solution. Please help me as soon as possible!! Thanks!!

    Hi Tom
    Here is my own educated guess.
    When you have links of any type in a HTML document, a calculation has to occur at the time they are created. The application has to calculate where the linked item is in relation to the existing page. Then HTML shorthand is created to navigate. Up a folder level is ../ and up two folder levels is ../../. Stuff like that.
    Popups are a different story. While you are still creating links, these beasties are actually handled using JavaScript. So the path is supplied in the call to the JavaScript.
    As if that weren't complex enough, we now toss Headers and Footers into the mix. Headers and Footers are tied to the Master Page. The Master Page is always in the root level of the project. Links in a Header and Footers often break because of the assorted locations of HTML pages if you are using folders to organize your project. So when you create the link initially as part of the Master Page, things are dandy and as long as the topic is in the project root folder (same as the Master Page) things would likely work fine. But if that Master Page is associated with a topic inside a folder level or two down, things can go to pot in a hurry! (Where are we all headed? And what's with the handbasket?)
    Hopefully this helps shed some possible explanation... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Windows 7 Error Message: Microsoft Visual C++ Runtime Library Runtime Error.... Followed by Windows Explorer Has Stopped Working

    I am running a system that is not quite 6 months old, which is loaded with Windows 7 Professional, 64 bit. 
    The error message that I get is as follows: Microsoft Visual C++ Runtime Library.  Runtime error!  Program C:\windows\Explorer.exe.  This application has requested the runtime to terminate it in an unusual way.  Please contact the
    application's support team for more information.
    Once I respond to that message, I get a message that says "Windows Explorer has stopped working.  Then I get "Windows Explorer is re-starting"
    I don't know if the next event is related - today, immediately after getting the message above, I got a pop-up that said "An update to Adobe Flash Player is available" - and I am given the option of installing it or not.  Today, I did not install
    the update - although I recall having accepted this update in the past (again, I don't know if the two situations always occur together).
    Is there some help I can be provided to correct this problem?  I have looked at several related topics in this database, but have not found anything that seems to directly relate to my question. 
       Thanks!    Mark

    Hi,
    Did you try to reinstall the Microsoft Visual C++ 2008 Redistributable
    Package (x86) to check this issue?
    What about to boot the computer in safe mode and Clean Boot to test this issue?
    Regards,
    Vincent Wang
    TechNet Community Support

Maybe you are looking for