Spool not displaying

Hi Experts,
I am not able to see the spool of my report.
My report have a huge spool.
When it completed or cancel in background,I am not able to see my spool, It is showing status - and pages 0.
But something is written into the spool thats why spool got generated with the sign .
Any solution of this.any other tcode where i can see that(SP01 is already tried).
Thanks,
jo

Hi Jowar,
I once had a similar problem in the past.
The solution was then made using the function RSPO_RETURN_ABAP_SPOOLJOB and export the BUFFER parameter to a TXT file.
Att,
Bruno Xavier.

Similar Messages

Spool Not displaying fully

Hi,
I have executed a report to be send to Spool . when l logn to spool to see the data, the last column of the report is nto shown in full. Please let me know of how do i see the last column of the report completely
I have already selected the device type as SWIN
Please guide

Hi Balaji,
please check the link once
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/display-big-spool-report-urgently-413277?cv=expanded
Regards,
Srinu

Spool ALV not displaying two column value

Hi,
In spool ALV is getting displayed. But the output is not printing the value of 2 columns , both are MATNR values. I checked the output table it is fetching the material number but ALV is not displaying it. please help its urgent. The GI material is not getting displayed.

HI Aparjitha,
As per the above screenshot I assume there should be only 2 possible cases as said by Jyoti. Apart from that there is no other chance of missing data, especially for couple of columns in the output.
If you are passing the value at run-time to MATNR and you are able to see that in output, hence your final internal table which you are passing to the ALV is not filled appropriately with MATNR values. May be those values are cleared somewhere.
It would be better if you could share some piece of your subroutine FIELDCATFILL code. Also place a breakpoint before ALV display and check if the fieldcatalog and the final internal table are having the appropriate values.
Regards,
Naresh

Spool not generated

Hi All,
Spool not getting generated when running a report in background . That report contains submit statement to display values.
But the same program is running in foreground perfectly and genarating output as required.
What could be the problem.
Appriciate any help in this regard.
Thanks ,
venkat

HI Venkat,
Are you scheduling the job immediately or after some time?
Are you getting any error log in the job overview?
Chcek if the report has any GRID Alvs being diplayed.
GRID alvs will not work in background.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana

Spool not generated in some condition

Requirement :Developing a data transfer program. Approach used is Call Transaction in S mode.
In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially MB11 creates Mat. Doc. No. which in turn passed to the LT06 to create TO(Transfer Order) and the TO passed to LT12 to confirm TO.
Problem When I run it in background(it generates report in foreground), job finished successfully, data is loaded into system and spool status shown as error ONLY IF ALL THE 3 TRANSACTIONS CALLED AND LOADED.
I debugged the Batch Job(using t-code JDBG) line by line output,contents are writen to output but at the end spool goes into error and report is not visible.
In all other cases like messages/outputs due to record not correct or/and only MB11 is to be processed, spool is generated with status Waiting and report is visible.
Statement at top
REPORT ZL6C_LOAD_INVENTORY_WM_SLOC
NO STANDARD PAGE HEADING
MESSAGE-ID ZOLSC_AS
LINE-COUNT 65
LINE-SIZE 148.
It works if I set line-size as 132 .
To overcome this I used FM GET_PRINT_PARAMETER with various cominations of parameter passed but it doesnt work
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
COPIES = L_C_ONE
DEPARTMENT = L_C_SYSTEM
DESTINATION = L_C_LOCL
EXPIRATION = L_C_2
LAYOUT = L_C_X_65_255
LINE_COUNT = L_C_65
LINE_SIZE = L_C_255
LIST_NAME = L_LIST_NAME
LIST_TEXT = L_LIST_TEXT
MODE = 'BATCH'
NEW_LIST_ID = G_C_X
NO_DIALOG = G_C_X
RECEIVER = L_C_SAP
RELEASE = G_C_X
SAP_COVER_PAGE = G_C_X
REPORT = SY-REPID
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = L_PARAMS
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4
IF SY-SUBRC = 0 AND NOT L_PARAMS IS INITIAL.
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG NEW-SECTION.
G_SPOOL = 'X'.
ENDIF.
Also when I use this FM under INITIALIZATION then it generates the spool but content written at TOP_OF_PAGE not displayed. When I use it under START-OF-SELECTION, problem still remain same.
Please Suggest
thanks
Sonal

Hello All,
I checked in SM58. It showed an error.
I checked my function module attributes. It was normal. Changed it to Remote enabled.
Now spool is generated.
Regards,
Kausthub

CF slows down to a halt ... images not displaying

My primary laptop on which I do all coding ...
- less than 1 year old
- Dell (cough) XPS M1730
- Windows XP (latest)
- ColdFusion Ver 8, developer edition.
- No other issues with laptop
Also running
- SQL 2000
- Synergy
- Anti virus etc. changed Norton daily scan and unaware that I have picked up any viruses - I was my hands very well and often
Over 6 months gradually CF has been slowly not display internal referenced <img src> tags. External work fine.
To the point now where most in our app do not display.
Then in the past 3-4 days a lot of pages when called give Firefox or IE errors:
Page will not display with too may users error.
But there aren't any others.
I go to all other web site, no issues with speed.
I just cold warm booted the machine and now while page 1 appears, page 2, login, takes minutes to appear. But on a beta server (also developer edition) it's instant.
When I go straight into the browser, it works fine, albeit no images, crashes with a known bug (missing application variable), fix it, then resume, then just sits there forever.
And there's no difference between the two machines ... well, not in "that" way.
Adding to my confusion is ... I cannot get into the CF Admin panel.
I can see it approve me, then it just spins.
Nothing has changed on machine in past weeks EXCEPT traveling when I sign in to the usual plethora of wifi and other networks but never had a problem - except luggability
I am thinking of, UGH, reinstalling Windows ... but why bother if it's working perfectly and only ColdFusion has an issue.
Now COLD booted machine for 5 minutes.
Everything seems better except CF still a BIT sluggish and still not "drawing" most images. Able to access Admin panel. Even if there images not displaying.
Anyone any ideas?

Thanks for your prompt reply ...
We scoured for a folder like that and found none.
What we DID find is that over the years of coding, we have a template count of 3,500 files in 130 folders, but the root where we start is about 1,500 files. 144 megs total size though.
That shouldn't be too much? Esp as our beta and production servers are using the same amount with no issues.
Admittedly production is CF 7.X.
Much more powerful machines but still.
It would have made sense as that is the only thing on the machine that has "grown" ... but no luck.
Does remind me of the day when our mail server got hacked and we had 100,000 outbound in the spool. That was fun.: :)

Automatic payment program spool not created

HI Exeperts
i am assing same role both users both user while doing f110 posting one use is succesed and another user was some time was sucesse ful and sometime getting error spool not created i tested in testing client same role here sucess.i checked in sm37 also but no error user go to sp02 some time he can display. whenever got the errore massage he cann't see the display option.i cann't understand this problem.
any body help me.
thank's
chandra.

Dear expert
My guess is your user SPAD - ADMIN ( Check over there )setup is incomplete, but as this is generally a BASIS responsibility
spool requested is not created.
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/payment-program-f110-is-not-creating-spool-nor-print-1848411#M1851567
Regards
Ajeesh.s

Spool Request Display Report

Hello,
Pleasure to be part of this community and ask the first question.
I have created a report and probably, that report is going to be scheduled to run weekly.
I want to understand how I can create a job and spool request display report for this program. I have found some information from this forum about SM36/SM37 T-Code and spool request display. However, I think I am not able to get the whole scenario of how it is going to work.
If someone can give me an idea, that would be great. Practical examples will be appreciated.
Regards,
Udit

I am assuming you will be scheduling this job manually and not programmatically.. The process is as follows..
Goto SM36
Enter a Job Name
click on START Condition butto and click Date and Time button
you will see a button PERIODIC VALUES appeared below.
Click and select WEEKLY as you have indicated, SAVE it.
Enter date and time so that it starts on that time and is scheduled everywk at that time
You can enter NO START AFTER in case you want to restrict this.
Then Click STEP
You can enter program name variant and also select Printer specification
And that should do the trick..
Hope this helps

KKS1 Detailed Spool not going in mail to recepients

Hi All,
I have scheduled KKS1 in background. There are 2 spools which are getting generated - 1. 1 Page report and 2. Detailed report. If I goto SM37 I can see only 1 page report, but in SP01 i can see both. The issue is system is sending only the 1 page report but not detailed report. This is not the case with other jobs like KKAK, KKAO etc.
Am I missing anything in variant?
Need urgent help on this.
Thanks in advance.
Regards,
Sree

Hi Sandeep,
I think you are talking about displaying spool. My issue is not display of spool. System generates 2 spools, but sends to the mail recepient only the second one, not the first one which is shows error report.
Hope I am clear.
Thanks.
Sree

Spool Not Generated Conditionally

Requirement :Developing a data transfer program. Approach used is Call Transaction in S mode.
In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially MB11 creates Mat. Doc. No. which in turn passed to the LT06 to create TO(Transfer Order) and the TO passed to LT12 to confirm TO.
Problem When I run it in background(it generates report in foreground), job finished successfully, data is loaded into system and spool status shown as error ONLY IF ALL THE 3 TRANSACTIONS CALLED AND LOADED.
I debugged the Batch Job(using t-code JDBG) line by line output,contents are writen to output but at the end spool goes into error and report is not visible.
In all other cases like messages/outputs due to record not correct or/and only MB11 is to be processed, spool is generated with status Waiting and report is visible.
Statement at top REPORT ZL6C_LOAD_INVENTORY_WM_SLOC
NO STANDARD PAGE HEADING
MESSAGE-ID ZOLSC_AS
LINE-COUNT 65
LINE-SIZE 148.
It works if I set line-size as 132 .
To overcome this I used FM GET_PRINT_PARAMETER with various cominations of parameter passed but it doesnt work
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
COPIES = L_C_ONE
DEPARTMENT = L_C_SYSTEM
DESTINATION = L_C_LOCL
EXPIRATION = L_C_2
LAYOUT = L_C_X_65_255
LINE_COUNT = L_C_65
LINE_SIZE = L_C_255
LIST_NAME = L_LIST_NAME
LIST_TEXT = L_LIST_TEXT
MODE = 'BATCH'
NEW_LIST_ID = G_C_X
NO_DIALOG = G_C_X
RECEIVER = L_C_SAP
RELEASE = G_C_X
SAP_COVER_PAGE = G_C_X
REPORT = SY-REPID
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = L_PARAMS
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4
IF SY-SUBRC = 0 AND NOT L_PARAMS IS INITIAL.
NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG NEW-SECTION.
G_SPOOL = 'X'.
ENDIF.
Also when I use this FM under INITIALIZATION then it generates the spool but content written at TOP_OF_PAGE not displayed. When I use it under START-OF-SELECTION, problem still remain same.
Please Suggest
thanks
Sonal

Use FM : RSPO_OUTPUT_SPOOL_REQUEST
Reward Points if it is helpful
Thanks
Seshu

Spool not generated for some conditions

Requirement :Developing a data transfer program. Approach used is Call Transaction in S mode.
In some cases(if Receiving Storage Location is PKGX) I need to load only MB11 and other cases I need to load 3 transaction sequentially MB11 creates Mat. Doc. No. which in turn passed to the LT06 to create TO(Transfer Order) and the TO passed to LT12 to confirm TO.
Problem When I run it in background(it generates report in foreground), job finished successfully, data is loaded into system and spool status shown as error ONLY IF ALL THE 3 TRANSACTIONS CALLED AND LOADED.
I debugged the Batch Job(using t-code JDBG) line by line output,contents are writen to output but at the end spool goes into error and report is not visible.
In all other cases like messages/outputs due to record not correct or/and only MB11 is to be processed, spool is generated with status Waiting and report is visible.
Statement at top 
REPORT ZL6C_LOAD_INVENTORY_WM_SLOC
 NO STANDARD PAGE HEADING
 MESSAGE-ID ZOLSC_AS
 LINE-COUNT 65
 LINE-SIZE 148.
It works if I set line-size as 132 .
To overcome this I used FM GET_PRINT_PARAMETER with various cominations of parameter passed but it doesnt work
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
COPIES = L_C_ONE
 DEPARTMENT = L_C_SYSTEM
 DESTINATION = L_C_LOCL
 EXPIRATION = L_C_2
 LAYOUT = L_C_X_65_255
 LINE_COUNT = L_C_65
 LINE_SIZE = L_C_255
 LIST_NAME = L_LIST_NAME
 LIST_TEXT = L_LIST_TEXT
 MODE = 'BATCH'
 NEW_LIST_ID = G_C_X
 NO_DIALOG = G_C_X
 RECEIVER = L_C_SAP
 RELEASE = G_C_X
 SAP_COVER_PAGE = G_C_X
 REPORT = SY-REPID
 USER = SY-UNAME
IMPORTING
 OUT_PARAMETERS = L_PARAMS
EXCEPTIONS
 ARCHIVE_INFO_NOT_FOUND = 1
 INVALID_PRINT_PARAMS = 2
 INVALID_ARCHIVE_PARAMS = 3
 OTHERS = 4
 IF SY-SUBRC = 0 AND NOT L_PARAMS IS INITIAL.
 NEW-PAGE PRINT ON PARAMETERS L_PARAMS NO DIALOG NEW-SECTION.
 G_SPOOL = 'X'.
 ENDIF.
Also when I use this FM under INITIALIZATION then it generates the spool but content written at TOP_OF_PAGE not displayed. When I use it under START-OF-SELECTION, problem still remain same.
Please Suggest
thanks
Sonal

Hi,
All spool requests will be stored in TSP01 table
TSP01 - Spool Requests
field name for Spool request number is RQIDENT
Hi,
Take a look at OSS Note 422136 which states:
"2. You can only store one spool request even if a step generates several spool requests during processing. The application is responsible for a "spool overview" in this case. If a step generates several spool requests during processing, only one request can be stored. In this case, the application report should issue the number with a message when writing a spool request so that it is then displayed in the job log."
Also take a look at OSS Note 519059 which further supports the case that you must capture the individual spool numbers as they are being created (i.e. within the job step's program). The note contains the following:
8] Question: How are the spool requests assigned?
Answer: The step information is stored in table TBTCP. This has space for exactly one spool request (field LISTIDENT). If a step generates several spool requests during the processing, only one can be stored. In this case the application is responsible for a "spool overview
Reward points
Regards

User exit / badi in spool list display

Hi, I have a little "problem" with spool lists: I'm looking at a spool list, generated by a Z-report in a Job. This is in maintenance planning: The job executes a first step to generate with ristra20 maintenance orders. In a second step my Z-report updates the orders generated in the first step. The next morning my maintenance planners can look into the spool generated by the job... but there is no easy, modification-free way to allow my maintenance planners to just double-click on of the order numbers and to sump into the order. For that I would need a user exit / badi in the spool list display. Now, I got some questions: Is there somebody else who would be supporting a user exit / badi in spool list display? How are development requests to be send to SAP nowadays with maximum probability to get implemented? Thanks for your time, Holger

Hi Holger,
If you go to class CL_EXITHANDLER, Method GET_INSTANCE, then put a breakpoint after 'call method cl_exithandler=>get_class_name_by_interface' i.e. at line 28 'case sy-subrc'; then run your transaction again and you will get many of the user exits and badis available. It will not show you the enhancement points, but all badis etc. will be there.
Hope this helps.
Glen

It can not displayed sap script

i have to post invoice in vendor a/c,then run to APP successfully,then execute spool,actually hear it can displayed ABAP list file, SAP script(otf) file,and SAP script file(otf) but hear only displayed ABAP list file, SAP script(otf) file it can not displayed vendor payment advice list why. pls give me answer

Hi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Spool not displaying

Similar Messages

Maybe you are looking for