Spool output not appearing on one page

Hello Experts,
When program runs in foreground, I am getting correct output i.e. ALV blocks are displayed on one page only.
But when running same program in background, I got output in spool and when looked at spool output that time I realized that the ALV blocks are getting printed on new page.
So instead of displaying 4 pages it is displaying 8 pages in spool.
I ran the same report on quality in FOreground as well as background and output appears to be correct.
But not sure why it is giving distorted (printed on new pages) in SPOOL output.
Appreciate your help.
Thank you.
Saurabh

HI Saurabh,
Check the Layout which you are passing which scheduling the job. It seems to be a different layout as compared to other system & hence the issue.
Thanks,
Best regards,
Prashant

Similar Messages

  • New Role does not appear in home page after assigned to a user

    Hi there!
    I'm new at SAP Portals.
    I've created a role and assigned it to an user, but the corresponding tab does not appear in home page.
    I've already changed permitions to a group that is assigned to the user.
    I've seen in some posts that the role's property "Entry point" should have value "Yes", but mine is set to "No". Meanwhile, I can't change it. When I open the role and press button "Properties" nothing happens. The only way I can check role's properties is through "Delta Link tracer", but there I can't change them.
    Can you help me, make the new tab (corresponding to role) happear in home page menu?
    Thanks and best regards,
    Vasco Brandã

    Hi,
    to track down you problem, you click on "properties", but you can't see the properties? They won't get loaded and therefor, you can't edit the property?
    What's your portal version + SPS, which browser are you using + version (IE, FF) and how do you access the portal? IP, FQDN? Are you getting any error message in the browser?
    What profile is assigned to your user? What kind of roles are you trying to modify? A new one, or a SAP pre-delivered portal role?
    br,
    Tobias

  • After upgrading 3.6.7, in "google image search" all the results appears in one page, I just need to go back to the previous way of search : page after page.......??

    After upgrading 3.6.7, in "google image search" all the results appears in one page, I just need to go back to the previous way of search : page after page.......??
    where can I adjust this option ?? I tried in IE, the search way is normal as in past..
    == This happened ==
    Every time Firefox opened

    I believe this to be a browser issue, not a google search results issue, and here is why:
    having updated Firefox only yesterday, I visited google images searching for pancakes.... interestingly, I have the NEW image results (yuck) on Firefox 3.6.8, I have the OLD image results on IE8 and Opera 10.53.
    When I use the 'switch to basic version' in Firefox 3.6.8, indeed it DOES revert to the new format next time I image search (in Firefox).
    For those of us who prefer the OLD image results page, I guess we will just have to switch browsers for google image search.
    Now I'm off to research how to get rid of the UGLY FFox sidebar.

  • Firefox 4: the drop down menus in the top menu bar will not appear in Google pages.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/808729''
    Firefox 4: the drop down menus in the top menu bar will not appear in Google pages. For example, when I click "more" it is like clicking a dead link. Nothing happens. When I click the "tools" icon or my email address to log out, same thing.

    Could you do the following please.
    In the location bar at the top, type '''about:config''' and hit Enter
    In the filter at the top, copy/paste the following setting:
    '''browser.urlbar.maxRichResults'''
    If the figure on the right is a single number, or a minus figure i.e. '''-1''', right click it, choose '''Modify''', remove the current setting and replace it with the figure "'''12'''".
    Then close Firefox and restart it again.
    I went to Google Maps, but as you can see from the screenshot, directions appear to be working.
    You could also try creating a new Profile. See [[Managing profiles]]

  • Output Not Appearing in Exported .TXT File

    Hi
    I am using Crystal Reports XI R2, using Universe as a Data source, and Business Objects XI Release  2.Oracle 10G as a Datasource with Universe.
    I am getting Correct Data, in Crystal  Report Viewer, But if i am making attempt to Export the Data to a .TXT File, it is not displaying tha Data as in Crystal Report Viewer.
    1) In my Case we are Using Page Number Reset Option, which is working fine in Crystal Reports Viewer, but in .TXT file output, Page Number is not reseted.
    2) We are Using Group Headers which has Text Objects and Formula Field,  the Group Header Displays for Each Group in Viewer, but same is not displayed in .TXT File output.
    3) For Very First Group, In Viewer it Displaying Page No as 1,1,2,3.....(which is not Correct, it should be 1,2,3....), but in .TXT file Output, it Displays right One as 1,2,3......
    But If iam Exporting the Report to an PDF File, it Displays Eactly as what is in viewer.
    So Kindly Help me on this Issue.
    Thanks
    M.Mukesh
    Edited by: m.mukesh on Dec 9, 2010 9:49 PM
    Edited by: m.mukesh on Dec 9, 2010 9:50 PM

    Moved to BOE Admin forum

  • Sapscript - Output Window twice on one Page

    Hi All
    I am working on a cheque output on pre-formatted paper.
    the page is split and perforated into 3 pieces
    1. Summary
    2. Actual Cheque
    3. Summary (identical to Part 1)
    Part 1 and 2 are sent to vendor, and part 3 is kept for our records.
    I need part 1 and part 3 to appear identically on one page.
    The print program is RFFTOUS_C.
    Can anyone help me with this issue
    Thanks

    Hi Anya
    Thank you for replying.
    I don't think this will work.
    The summary parts of sapscript need to output invoice line items, what i really need is two main windows on the one page, one on the top and one on the bottom.
    I have tried creating two main windows, but I only get the output in the top window
    Any ideas ?

  • SM37 spool output not matched with the mail received

    Hi All
    I have a background job which run on daily basis. After the job is finished successfully the spool is sent to client in the form of the html page.
    The mail received by client and the actual spool in R3 are not matching.
    Some of the text is missing at the end of the lines. Say like a row having 300 characters in the actual spool R3, 280 characters are only showing in the received mail of client, last 20 characters are missing.
    How to check the settings of Page width in SAP R3.
    Should i check the settings in the Mail configuration.
    Please advise
    Regards

    Hi
    Thank you for all the replies.
    The issue is related to the width of the output missing.
    The spool output is fine. Once this output is generated this wil be send to the spool recipient.
    spool output is different in the spool recipient and actual spool output produced in SM37. i.e  The width of the spool received in the spool receipient is missed. length is ok but widh is missing.
    Should i check in mail settings. Please help me
    Regards,

  • Navigation bar does not appear on published page, Replaced by a "bullet"

    Navigation bar does not appear on the published page, but is replaced by a "bullet".
    "Include page in Navigation menu" is checked on every page.
    Therefore unable to navigate to other pages.
    If other pages are moved to the first position, the same thing occurs - ie  unable to navigate to any other page.

    One frequent reason for that is the fact that not all the files in the Scripts folder for the site are getting uploaded.  While viewing the site bring up the Activity Window (Command+Option+A) and see if any of the files are listed as missing. If there are you'll need to upload the Scripts folder to the server.
    If you're using iWeb the only option there is to try the File ➙ Publish Entire Site menu option. 
    Or, you can publish you site to a folder on your hard drive and use a 3rd party FTP client like  Cyberduck to upload just the Scripts folder to the server.
    OT

  • Cursor does not appear on Facebook page load. Spacebar shifts page down.

    Cursor does not appear anywhere on Facebook page load. It used to land in the first text box, and as I was used to this I would open an FB page and start typing. Nothing was entered into the text box, and when I hit Spacebar it shifts the page down.
    Couple of things:
    It acts this way both in normal and in "safe mode".
    It acts correctly on Google - it is my home page and when I open it the cursor is always in the search box. It also acts correctly on YouTube.
    The cursor DOES NOT appear in the URL bar (thankfully)
    The cursor DOES NOT appear in any text boxes on any other pages I open >> The Weather Channel, TED.com, Amazon.com
    The Spacebar scrolls the screen down one frame at a time.
    It has the same behavior with the "Always use the cursor keys to navigate within pages
    I am using FF 18.0.1 on Windows XP
    I have tried a lot of the weird tips and tricks suggested on this support forum, but none of them address specifically this issue.
    Thanks in advance.

    If I'm not logged on then the cursor is in the login form at the top.<br />
    Once logged in the main body has focus and not a specific element, so you have to click in an input filed to set focus to it.
    If it worked before then they have changed the code of that page recently and it is just a coincidence that it happened around the time that Firefox updated.

  • Spool output not as per the requirement.

    I am using REUSE_ALV_GRID_DISPLAY with  31 columns in the foreground report . The report executes fine in the foreground. Even the spool is created fine when run on the background. Spool output is breaking to the second row after 25th column. But the client needs the spool output for all 31 columns in the same line. Can anyone help me that how can we do the same?
    I am using  X_65_255 format while running in background. My report has line-size of 260. I tried extending the line-size too. But there is no difference in the output. Even changing the setting to different page format was not helpful.
    Thanking you all in advance and hoping for quick solution.
    Ranjan

    1.What type of printer being used?
    2.Any reserve statement used in ur program?
    3.Try with X_65_132
    4. Is this happning only for this report print out?

  • Excel Save As dialog not appearing for one user

    Hi,
    My company uses a payroll application called Cintra.
    It's possible to run a report in this application and
    export it to Excel.
    When one of the users exports a report and clicks File > Save As > Browse nothing happens. All other users get the Save as dialog.
    Is there any setting that may be preventing this? She does not appear to have this trouble when saving any other
    Excel
    files.
    We all use Excel 2013 on Windows 7 in Citrix.
    Cheers
    Paul

    Here is an article for troubleshooting errors when save Excel files you can refer to
    http://support.microsoft.com/kb/271513
    Based on your description, it's most likely that a Third-party add-in causes this issue, you can try to start excel in safe mode to test it.  excel.exe /safe

  • Reg : ALV Grid Refresh - Output not appearing

    Hi All ,
    Am calling a screen 100 at 3 different places.
    Though i use refresh_table_display , The value in the output table, say i_final changes, but while displaying the output , the whole screen is blank , even the container is not appearing in the output .
    Can you please help me with your inputs .
    Regards,
    Chitra

    yes it is good ...see the example...for your requirement..
    REPORT yztest .
    TYPE-POOLS: slis.
    Tables
    TABLES: mara.
    TYPES: BEGIN OF ty_name,
           name  TYPE char10,
           age   TYPE i,
           END OF ty_name.
    TYPES: BEGIN OF ty_marks,
           sub1   TYPE i,
           sub2   TYPE i,
           total  TYPE  i,
           END OF ty_marks.
    TYPES: BEGIN OF ty_phone,
           phnum TYPE char10,
           END  OF ty_phone.
    TYPES: BEGIN OF ty_addr,
           address TYPE char20,
           END  OF ty_addr .
    Output internal table
    DATA: itab TYPE TABLE OF ty_name,
          wa   TYPE ty_name,
          itab1 TYPE TABLE OF ty_marks,
          wa1  TYPE ty_marks,
          itab2 TYPE TABLE OF ty_phone,
          wa2  TYPE ty_phone,
          itab3 TYPE TABLE OF ty_addr,
          wa3  TYPE ty_addr.
    ALV Grid
    DATA: r_grid  TYPE REF TO cl_gui_alv_grid,
          r_grid1 TYPE REF TO cl_gui_alv_grid,
          r_grid2  TYPE REF TO cl_gui_alv_grid,
          r_grid3  TYPE REF TO cl_gui_alv_grid,
          g_dock TYPE REF TO cl_gui_docking_container,
          g_dock1 TYPE REF TO cl_gui_docking_container,
          g_dock2 TYPE REF TO cl_gui_docking_container,
          g_dock3 TYPE REF TO cl_gui_docking_container,
          g_dock4 TYPE REF TO cl_gui_docking_container,
          it_fieldcat  TYPE lvc_t_fcat,
          it_fieldcat1 TYPE lvc_t_fcat,
          it_fieldcat2 TYPE lvc_t_fcat,
          it_fieldcat3 TYPE lvc_t_fcat,
          wa_fieldcat TYPE lvc_s_fcat.
    DATA picture TYPE REF TO cl_gui_picture.
    DATA url(255).
    CLEAR url.
    DATA  init.
    START-OF-SELECTION.
      wa-name = 'test01'.
      wa-age = '1'.
      APPEND wa TO itab.
      wa-name = 'test02'.
      wa-age = '2'.
      APPEND wa TO itab.
      wa-name = 'test03'.
      wa-age = '3'.
      APPEND wa TO itab.
      wa1-sub1 = '11'.
      wa1-sub2 = '22'.
      wa1-total = wa1-sub1 + wa1-sub2.
      APPEND wa1 TO itab1.
      wa1-sub1 = '22'.
      wa1-sub2 = '33'.
      wa1-total = wa1-sub1 + wa1-sub2.
      APPEND wa1 TO itab1.
      wa2-phnum = '99999999999'.
      APPEND wa2 TO itab2.
      wa2-phnum = '888888888888'.
      APPEND wa2 TO itab2.
      wa2-phnum = '777777777777'.
      APPEND wa2 TO itab2.
      wa3-address = 'HItech City'.
      APPEND wa3 TO itab3.
      wa3-address = 'Secunderabad'.
      APPEND wa3 TO itab3.
      wa3-address = 'Hyderabad'.
      APPEND wa3 TO itab3.
      PERFORM display_image.
      CALL SCREEN 100.
    *& Module STATUS_0100 OUTPUT
    text
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'LISTOUT1'.
      SET TITLEBAR 'LIST1'.
      wa_fieldcat-fieldname = 'NAME'.
      wa_fieldcat-seltext   = 'NAME OF THE STUDENT'.
      wa_fieldcat-coltext =   'NAME OF THE STUDENT'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'AGE'.
      wa_fieldcat-seltext   = 'AGE OF THE STUDENT'.
      wa_fieldcat-coltext =    'AGE OF THE STUDENT'.
      APPEND wa_fieldcat TO it_fieldcat.
      wa_fieldcat-fieldname = 'SUB1'.
      wa_fieldcat-seltext   = 'SUBJECT1'.
      wa_fieldcat-coltext =    'SUBJECT1'.
      APPEND wa_fieldcat TO it_fieldcat1.
      wa_fieldcat-fieldname = 'SUB2'.
      wa_fieldcat-seltext   = 'SUBJECT2'.
      wa_fieldcat-coltext =    'SUBJECT2'.
      APPEND wa_fieldcat TO it_fieldcat1.
      wa_fieldcat-fieldname = 'TOTAL'.
      wa_fieldcat-seltext   = 'TOTAL'.
      wa_fieldcat-coltext =    'TOTAL'.
      APPEND wa_fieldcat TO it_fieldcat1.
      wa_fieldcat-fieldname = 'PHNUM'.
      wa_fieldcat-seltext   = 'PHONE NO'.
      wa_fieldcat-coltext =    'PHONE NO'.
      APPEND wa_fieldcat TO it_fieldcat2.
      wa_fieldcat-fieldname = 'ADDRESS'.
      wa_fieldcat-seltext   = 'ADDRESS'.
      wa_fieldcat-coltext =    'ADDRESS'.
      APPEND wa_fieldcat TO it_fieldcat3.
      IF g_dock IS INITIAL.
        CREATE OBJECT g_dock
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock->dock_at_left
                      extension = 300.
        CREATE OBJECT r_grid
                  EXPORTING
                  i_parent = g_dock.
      ENDIF.
      IF g_dock1 IS INITIAL.
        CREATE OBJECT g_dock1
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock1->dock_at_right
                      extension = 300.
        CREATE OBJECT r_grid1
                  EXPORTING
                  i_parent = g_dock1.
      ENDIF.
      IF g_dock2 IS INITIAL.
        CREATE OBJECT g_dock2
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock2->dock_at_top
                      extension = 100.
        CREATE OBJECT r_grid2
                  EXPORTING
                  i_parent = g_dock2.
        IF g_dock3 IS INITIAL.
          CREATE OBJECT g_dock3
                        EXPORTING
                        repid     = sy-repid
                        dynnr     = sy-dynnr
                        side      = g_dock3->dock_at_top
                        extension = 100.
          CREATE OBJECT r_grid3
                    EXPORTING
                    i_parent = g_dock3.
        ENDIF.
        IF NOT itab[] IS INITIAL.
          CALL METHOD r_grid->set_table_for_first_display
            CHANGING
              it_outtab       = itab
              it_fieldcatalog = it_fieldcat.
        ENDIF.
        IF NOT itab1[] IS INITIAL.
          CALL METHOD r_grid1->set_table_for_first_display
            CHANGING
              it_outtab       = itab1
              it_fieldcatalog = it_fieldcat1.
        ENDIF.
        IF NOT itab2[] IS INITIAL.
          CALL METHOD r_grid2->set_table_for_first_display
            CHANGING
              it_outtab       = itab2
              it_fieldcatalog = it_fieldcat2.
        ENDIF.
        IF NOT itab3[] IS INITIAL.
          CALL METHOD r_grid3->set_table_for_first_display
            CHANGING
              it_outtab       = itab3
              it_fieldcatalog = it_fieldcat3.
        ENDIF.
    if   g_dock4 is initial.
        CREATE OBJECT g_dock4
                      EXPORTING
                      repid     = sy-repid
                      dynnr     = sy-dynnr
                      side      = g_dock4->dock_at_bottom
                      extension = 100.
        CREATE OBJECT picture
                          EXPORTING parent = g_dock4.
        CALL METHOD picture->load_picture_from_url
          EXPORTING
            url = url.
        init = 'X'.
    endif.
      ENDIF.
    ENDMODULE. " STATUS_0100 OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    text
    MODULE user_command_0100 INPUT.
      CASE sy-ucomm.
        WHEN 'BACK'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *&      Form  display_image
    FORM display_image .
      DATA query_table LIKE w3query OCCURS 1 WITH HEADER LINE.
      DATA html_table LIKE w3html OCCURS 1.
      DATA return_code LIKE  w3param-ret_code.
      DATA content_type LIKE  w3param-cont_type.
      DATA content_length LIKE  w3param-cont_len.
      DATA pic_data LIKE w3mime OCCURS 0.
      DATA pic_size TYPE i.
      REFRESH query_table.
      query_table-name = '_OBJECT_ID'.
      query_table-value = 'ENJOYSAP_LOGO'.
      APPEND query_table.
      CALL FUNCTION 'WWW_GET_MIME_OBJECT'
        TABLES
          query_string        = query_table
          html                = html_table
          mime                = pic_data
        CHANGING
          return_code         = return_code
          content_type        = content_type
          content_length      = content_length
        EXCEPTIONS
          object_not_found    = 1
          parameter_not_found = 2
          OTHERS              = 3.
      IF sy-subrc = 0.
        pic_size = content_length.
      ENDIF.
      CALL FUNCTION 'DP_CREATE_URL'
        EXPORTING
          type     = 'image'
          subtype  = cndp_sap_tab_unknown
          size     = pic_size
          lifetime = cndp_lifetime_transaction
        TABLES
          data     = pic_data
        CHANGING
          url      = url
        EXCEPTIONS
          OTHERS   = 1.
    ENDFORM.                    " display_image
    *&      Module  EXIT  INPUT
          text
    MODULE exit INPUT.
      CALL METHOD g_dock->free.
      CALL METHOD g_dock1->free.
      CALL METHOD g_dock2->free.
      CALL METHOD g_dock3->free.
    ENDMODULE.                 " EXIT  INPUT

  • Favicon in DWT will not appear on other pages?

    I made a Favicon.ico and placed it in my .dwt Template file.
    <link rel="shortcut icon" href="../SM Images/favicon.ico" />
    When I view the template file on the net I see the favicon image.
    But when I go to view the other pages with in the site I do not see the favicon.
    I have checked and I see the code in all the pages but the favicon still does not appear.
    The favico only apperas in the template .dwt file and no other pages.
    Thanks in advance,
    Travis

    The answer is possibly in this thread.
    http://forums.adobe.com/message/186890#186890
    PZ

  • Logout link does not appeared in exception page

    When exception is thrown , the logout link is not appeared in the exception page. By default , we select error page in themes as two level tabs.
    Where can I get the error page for the themes. Is can i see the code for error page , if possible.
    Please help me out.
    Thanks,
    Sesha

    THANKS ITS WORKING FINE NOW>
    WE ARE USING 3.0.9. Actually there was a problem with the template which resulted in the Link not working.
    Thanks

  • Links not linking on one page. Differences in Firefox, Camino & Safari...

    Hello, I doubt this is a new question... My web site is hearth2hearth.com My problem(s) is/are: The links at the bottom of the "Who's in the Kitchen?" page (email & [email protected]) do not work when published. These same links on all other pages do work. On this same page there is a photo and a caption beneath it that are both links to another site. Neither work. All links to other pages on my site (at the top of all pages) work fine. However (a separate problem) some of those links at the top of the pages are of a different color than I chose, and/or are underlined when I deselected Underline in the Format section of the Link Inspector. I have looked at the site on Firefox, Camino & Safari and there are differences on all three. (Firefox has never updated critical changes I made a while ago. Safari shows a hit counter twice that I thought I removed or at least I never see it anywhere else.) My host is not .mac, but hostmonster.co I have not yet begun tearing my hair out in frustration, but my hands are beginning to reach for my scalp...HELP! And thank you in advance.

    Wyodor,
    1. It may be messy or it may not. It seems that is opinion as opposed to fact. I am not a designer. I am a guy who has iLife and so I have iWeb & a need. Mac makes it easy for those of us with no designer experience to feel we can do something. It may not be up to designer's standards but it's what we have.
    2. Why two email addresses? One is direct link and the other is in case someone would rather copy & paste the address in case they are at another computer and do not wish to use the default email of the host computer. I don't know. It was a suggestion I took. Doesn't seem harmful to me...
    3. Out of focus? Where? There are no options to focus anything and all it is is typed words. I cannot see how it is out of focus.
    4. I have looked and looked again at these pages. Code means nothing to me. So all I can do is look at the page itself and try to figure things out. What is frustrating is that things look different depending on which computer and which browser I view them on. While working here on iWeb I see certain results but I don't have several computers and every browser available all the time. So how am I supposed to fix anything when it looks fine when I working on it? I just discovered yesterday while at a friend's house that on IE the site had two hit counters I cannot see on Camino, Safari or Firefox. I even thought I had removed the hit counters mostly because I couldn't see them when I put them on.
    5. I have used a font that may not be recognized. But it is recognized on the other pages. My problem is mostly - but not entirely - with this page. All I see is that even where the pages are similar, they read differently. I have nothing blocking these links any more than I might on other pages and yet this one page will not link.
    Thanks for your help, though. As I said, the code here is Greek to me. So I cannt use it or even recognize if its helpful...

Maybe you are looking for