Spool printing problem
Hi Guys,
My spools geting created,suddenly, i have been inundated with spool requests to output device 'BA01'.
what could be the reason for this?
If question is not clear, please let me know, i would try to give more info.
Thanks
Gourisankar
Hi,
go to T-code SU01..
got to Select Defaults Tab..
check the Printer asigned..if the default printer is set to 'BA01'. change to you rown setting..
if the printer is not 'BA01' then check the program where printer 'BA01' is asigned.
Prabhudas
Similar Messages
-
Hi,
In spool details it is showing copies & pages correctly, but while printing it will print double copies.
e.g. If I will give 2 copies which have 4 pages.It will print 8 pages meant 4 copies.
Thanks,
aNILSo, if the spool contains 2 pages numbered 1-2, and you print 2 copies, you should get 1-2-1-2 sequence, but you get 1-2-1-2-1-2-1-2.
1) Am I correct in the sequence, or is it different? Are there blank pages?
2) What happens if you print 1 copy?
The only problem I know happens with AS/400 systems and is corrected --> see note 1158640.
3) Does it solve?
If it doesn't solve, could you tell us what is your customizing:
4) do you print in duplex or special mode?
5) what about the output device: what access method do you use, what device type, what copy counter option?
6) what printer model is it?
Thx -
Problem printing when spool print documents is selected as apposed to print direct
I have an officejet 6500 and I'm having a problem printing a label created using Label Factory Deluxe software. The job will not print if spool print documents so that printing finishes faster is selected under the printer properties. The job appears to be sent to the printer. The printer icon appears in the task tray for less than a second and the printer makes a trill sounding beep but nothing prints. In addition there is nothing in the print que. It will print however, if print directly to the printer is selected. Any ideas???
Hello,
Well with out any info on versions the easiest way is to check the Not Printer Option on in the Page Setup of the Report.
Don -
Having printer problems. Shockwave flash file shows on print spooler, should it? Could this be part of problem?
Please ask your question on a forum for the Flash Player
-
Printing problems with HP Laserjet P1005
everything seems to be ok with my printer HP Lasejet P1005, but it just doesn't print. The works are in the gueue and error messages continually is "set the new toner cartridge" althrough I've changed the cartridge already. Also there is a message "HP:s part number"
What can or should I do??? Help!!!Hi @rlp48,
I see by your post that you are getting the error message "set the new toner cartridge" and you have already changed it with a HP toner. I would like to help.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid 5 times quickly. It should print out a page with lines on it.
Did it print the self test?
If the self test page printed, clear the Spool folder and restart the Print Spooler and try printing again.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you using Genuine HP Toner?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Purchase order print priview and spool print output are different.
Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards, -
Printing Problems with the special character &
Hi All,
When our users are printing POS character & is printing as junk i.e where ever there is a & print prieview shows & along with
some other characters <(>&<)> .
Host Spool Acess Method is F:F: Printing on Front end computer
HostPrinter is __DefaultSorry i was in between and it got posted.
Device Type is SWINCF CASC Fonts SAPWIN Unicode
other special characters like " and - are being recognized. It does not seems to be a print problem coz i can see the junk in print
preview. Has any one seen this error before. I apologize if i posted this in the wrong forum
Regards,
Ershad Ahmed -
Print priview and spool print output are different
Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit -
Cheque: Printing problems: Tcode F110
Hi
We are having problems to print cheques with a new userid. We can view the cheques in the spool list, but can't print to it. The new user are copied from a user which are currently printing it sucessfull.
If the new user have the same authorization and profile as the one that are printing sucessfull, why are we having printing problems? Is there any additional configuration that we are missing?
txYes, and all are sucessfull.
What i cant understand is that both users have the same profile/role/authorization. Why can one print to the cheque printer and the other can't.
Are there any additional configuration needed per printer which allow only spesific/dedicated users to print to the cheque printer? -
Dear Expert,
I'm facing a barcode printing problem where it displayed incorrect barcode formatting in the print preview by displaying strips for bar lines. I'm using Sapscript to do this and I have already specified in Character format for barcode Code 39 and I have created a Z system bar code(se73) specfically for this. Could you pls give me some ideas on how to solve this problem.
Thanks
AdisHi Adis,
There is another way of having the print preview. You directly print the Sap Script, it will go to spool (SP01). Now use the program RSTXPDFT4 in SE38 and enter the spool number. It will convert the spool record with that particular number to the PDF fomat. You can now see the view through the PDF format.
In the direct print preview you may do not get the correct view of the bar code specially for the SAP Script.
Please check....
Warm Regards.
Abhijit. -
Printing problem with new Intel iMac and Indesign CS3
Hi there,
this might not be the right place to ask for, but has anybody here experienced printing problems in Indesign CS3 with Tiger?
I just installed the software and tried to print out of Indesign, but nothing. I can see on the panel that data is beeing received but no printing action. And this is just out of the new Indesing CS3.
Any suggestions?
Best
RolfOur office is printing fine from ID & PS CS3. This is from Intel & PPC Mac's running 10.4.9.
What is your printer and how is it configured for printing, ie USB or IP.
Also, have a look at the cups error log. You can find this via System Profiler > Software > Logs. This will show which process is failing for the spooled job. You can post it back here for more help. -
Printing problem with officejet l7650
Hi, when i print in Word, the last line is not complete. The print mist the alf of the line, just the upper of the line appear.
I upload the new driver, i print without spool etc.. the problem is the same.
Please help me!!Have you tried printing with another word processor to see if the print problem is with Word or something else? You can print Word documents with the free program Openoffice, which you can download from download.com or Openoffice.org
If you find the problem is with Word, Try uninstalling and reinstalling Word. First, you may want to download the free utilities Glary Registry Repair & Glary Utilities. Run both of them, reboot Windows and try a document. If that does not help, then do the uninstall, reinstall. That is easier than trying to run down the exact problem in your Word settings.
--J
"I never let schooling interfere with my education" --Mark Twain -
Spool printing undefined character symbols in sap script
Hi,
When I am trying to print a script, the spool print preview shows a times font and the size that I had defined in the form, but when the print is coming out it is coming with a courier font with the default font size of the printer and it is printing a smiley symbol on the start of every line. I have checked the fonts in all the windows of the form and everywhere it says times with a size of 12.
Please help me out
Regards,
KiranHi,
Is that problem only at 1 printer or at all printers.
If it is onlty at 1 specific printer ask the basis guys .
Gr., Frank -
Printer Problems (new thread)
I have an HP Photosmart 6150 that has been giving me more than a few headaches. The first is that when ever I try to print a document, I get a message to replace the empty black ink cart. This has happened with two new carts. The gauge on both the printer and using the HP software show the cartridge as being full.
I also usually have to go through and troubleshoot the printer because the "spooler service" is not available
This is happening with my Windows 7 operating system and the printer is attached to that PC via a USB port.
Any help would be appreciated.
MarkHi jennmcmeow ,
Can you answer a few questions, then hopefully I can help you with your printing problems.
1. Did you purchase A or XL sized supplies for your unit?
2. What type of documents are you printing, black text, mixed text and graphics, heavy colour, photos etc....
3. What time frame did you print the 50 pages over?
4. What are the estimated ink levels on your unit? From the Home screen, touch the ink icon to get estimated levels.
Many Thanks,
Francheska
Although I am an HP employee, I am speaking for myself and not for HP. -
Cheque: Printing problems
Hi
We are having problems to print cheques with a new userid. We can view the cheques in the spool list, but can't print to it. The new user are copied from a user which are currently printing it sucessfull.
If the new user have the same authorization and profile as the one that are printing sucessfull, why are we having printing problems? Is there any additional configuration that we are missing?
txPlease do the following
Ask the user who has problems printing to go to transaction SU3 and then to defaults tab.
He needs to check if Printer name is entered in the Output
Device.
And print immediately check box is checked.
Hope this helps
Maybe you are looking for
-
Can i use my time capsule directly without internet
I just bought a new Time Capsule. Can I use it to back up my system directly through the Airport without going through the internet
-
I often travel abroad and my host has changed Internet provider. Then my service was interrupted and I can't update iTunes. Any tips to stop the error messages?
-
AIAB Error is showing profit center line item 001 not filled
Dear All, In Asset Account while posting AIAB t.code system is showing error Balancing field "Profit center" in line item 001 not filled. Message no. GL2201 Diagnosis. The profit center marked as balancing is not filled with any value in line item 0
-
Photoshop elements 12 for iMac printing undersize
I have purchased Photoshop Elements 12 for iMac from Applestore and when I print a photo "actual size" the printout is only 93% of true size. I have tried to print to a Canon MP610 and a Canon MG5550 with the latest drivers installed and get the same
-
Help. sending fcp timeline to color changes some clips to freeze frames
I was finishing a project in FCP that was shot on the RED. I had a number of deliverables. I cut in FCP with REDs M-res proxy QT files then uprezed (replaced the footage) to H-res for my conform. I then "sent to color" a number of different timelines