Spool request has been reused in mean time

hi all,
when i am going to open spool for completed job it is saying like " spool request has been reused in mean time".
plz can any one guide me to solve this issue.
regards
subhani.

Hi,
This isn't the right forum for your question.
Check the post below, see if helps your problem.
spool problem
Regards,
Vishnu

Similar Messages

  • CUP: Delete user certain time after request has been created

    Hi,
    Is it possible to define in CUP a delete account workflow that once the request has been created user deletion waits some time (i.e 1 month) before user is finally deleted? We would need a workflow without any approver.
    Delete User request creation >> 1 month >> User is deleted
    Thanks in advance. Best regards,
      Imanol

    Hi,
    Automatically deleting user IDs after a specific # of days is not possible in CUP. However, while creating the stage, you can define the wait time and then trigger the escalation. You can make the escalation to the Security Manager who can immediately take up the proper action, i.e., deleting the ID or making it inactive.
    Infact, this is the reason why it is recommended to have an alternative approver.
    Hope this addresses your question.
    Regards,
    Raghu

  • How can I tell how long a request has been sitting on an execute queue?

    Is it possible to determine (in WL 8.1 and/or 10.3) how long an HTTP request has been sitting on the execute queue before being assigned to a servlet?
    Under heavy load, I'm finding that the caller times out by the time the servlet tries to write the response because the request has been waiting on the execute queue for too long. To prevent doing all the work to process the request, I want to be able to see how long the request has been waiting to determine whether it's worth processing the request.
    Currently I use the getExecuteThreadTotalCount() method in ExecuteQueueRuntimeMBean and assume that if the count is high, the request has probably been waiting for a while, but getting the actual time on the queue would be much better.
    Thanks.

    Further investigation and a bunch of speed tests later, I'm even more puzzled. Between 7 pm and 9pm this evening, download speed has been consistently at 112kb, except for the 1 in 10 occasions where it hits 1.5mb, for 30 or 40 seconds, before dropping back to 112kb.
    Does anyone have any ideas what is going on?
    thanks in advance
    Ben

  • How to find out if a transportation/accomodation request has been changed?

    Hello all,
    I need to know if one transportation/accomodation request has been changed after being created. I am using the TRIP standard transaction to plan the travel request without any external agency integration.
    My problem is that if I change any field of one travel request such as: begin time, city from, destination or whatever, I cannot
    find any field or table that lets me know there has been a change.
    I am using an user exit that triggers once you have pressed the "Save" button, but there is no info about the travel requests. There is info about the cluster of the trip, but not about the travel requests. Only the FTPT_REQUEST database gives me this information, but only the final one, so I cannot compare the previous values with the last ones.
    Can you please help me with this topic? I don't know how to solve it.
    Thank you very much in advance.
    Best regards.

    Hi,
    you can use trace event ST01 or using SAP standard workflow.
    as per standard workflow WS20000050 for travel request, while in travel request workflow for approval there is task of "wait for event" that could know if you are changing your travel request it will flow to stop workflow and start it again.
    for details, maybe you could see sap workflow SWDD and open workflow of WS20000050.
    hope it helps.
    thanks.

  • How to notify a self registered user that his/her request has been denied

    Hello,
    Is there a way to send an email to the requestor (this email address is what the user puts in the self registration form under requestor email) to notify that the request has been denied? (OIM 9.1)
    In The User Registration Process Definition, Task Awaiting Approval Data, I have the Assignment Tab set as follows:
    Rule: Default
    Target Type: Group
    Adapter AssignApproverGroup (this adapter dynamically looks for the members in a group based on the requestor organization, assigns the task to these individuals, and sends an email notifying that self registration approval is pending to all members of that approvergroup)
    Priority: 1
    Notification Tab
    Assignee is checked
    Status: R
    Email: Self registration request Denial
    When the Assignee logs in and denies the request, an email is sent to the Assignee about the denial.
    Questions:
    1. If the ApproverGroup has more than 1 member, how can we notify all the members of the Approver group that the request has been denied?
    2. How can we notify the requestor that his/her request has been denied using his/her provided email from the self registration form?
    Thanks
    Edited by: Khanh on Dec 4, 2008 3:36 PM

    You need to think about how the whole system is going to work - you need to know everything that the button will require, and then think about how to provide this information to the button.
    So, by the sounds of you need say a single button to press when you want to add a new button to the calculator. Associated with this have text fields that take the function for the calculator. I would specify that the function uses variables e.g. x and y as in function = x * y. Then your program could parse the input string describing the function, by recognising "*" to mean * in the Java code syntax and "/" to mean /. Then treat everything else as variables. Since you can filter out the other variables i.e. not the operators, you can then say associate an array to contain the values of these. Then when the user uses the button and specifies the input parameters and presses the button, you can update this array, and perform the calculation based upon these values.
    Hope this helps.
    My advice really is just to think about everything that a button that creates new function buttons is going to need.
    PS. Remember to repaint the GUI once update its Container. Swing does this automatically, but I always specify it explicitly anyway to be safe. You can use either repaint(), validate(), or revalidate().
    Goodluck mate!

  • BB ID & APP (The page you have requested has been moved or no longer exists. (EC ))

    I changed my email associated with my BB ID on my desktop, after upgrading to OS6 on my Curve 9930:
    NOW............
    Playbook & Curve - "App World is having difficulty connecting to App World Server. Verify Network Connections."
    Deskptop (Blackberry ID) - Only Allows me to see "Logout" and see "Account Details"
    Should i change my email back to what it was?
    Should I wait 24 hours and try again?
    Is there someone I can call to review the issue?
    This is the messsage I see when i try to log in to (App World) on Desktop:
    Page Not Found
    The page you have requested has been moved or no longer exists. (EC )
    To return to the home page please click here

    Please try optimizing your browser (clear cache, cookies, internet history, download history, etc.)
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

    Firefox has been crashing all the time after I updated to the newest version. I tried to uninstalled firefox and all addons. Restarted the computer to reinstall Firefox and it's still crashing all the time. Please help.

    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
    Type '''about:crashes''' in the URL bar and hit Enter. <br />
    Click the hyperlinks to bring up the Crash Report pages and copy'n'paste the URL of each of those reports into the message box here. We'll see if we can help you figure out what is causing those crashes to happen.

  • TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

    I have edited a movie in Final Cut Pro and the video has been smooth all the time.
    Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
    What is wrong? All the sudden.

    We need info, info, info!
    What version of FCP X?
    Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
    It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
    Try exporting a master file and see if the video is ok.
    Also, keep Activity Monitor open and see how much memory pressure you've got.

  • How to check with which user id a request has been transported

    Can anybody tell me how to find out with which id a request has been transported to a system?
    Regards,
    Sridevi

    Hi,
    To find who has moved the request.
    In STMS, Go to import overview(F5). Select the system in which you want to see who has moved the request.
    Then at the top menu, in GOTO select IMPORT HISTORY(Ctrl+F7).
    Once you are in import history, at the top menu in EDIT select DISPLAY MORE(Ctrl + Shift + F1).
    Then it will display the users list.
    Hope this helps you.
    Regards,
    Ravi

  • Error saying "this ID has been authorised too many times" , how to resolve ASAP?

    Error saying "this ID has been authorised too many times" , how to resolve ASAP?

    Adobe Live Chat: http://www.adobe.com/support/chat/ivrchat.html
    They can reset your authorizations, and then you must reauthorize any devices you still need.
    (Unfortunately, Adobe haven’t got round to an admin website for viewing and editing authorizations.)
    Some of the representatives haven't been properly trained and don't know what to do (and claim there is nothing they can do);
    in that case the only way seems to be to give up that chat and try another session hoping for a properly trained representative.
    If your problem is with another device using Overdrive, Bluefire, Aldiko or similar third party app, it is recommended not to mention that app when on the chat, just mention that you have run out of authorizations  (E_ACT_TOO_MANY_ACTIVATIONS) .  Thanks to AJP_Bear for that tip.

  • Notifying a user that an Urgent Change Request has been Approved, or Denied

    Trying to figure out the best way to have an email go back to a user after a Change Request has been updated with either an Approved or Deny
    What we do now is after a user creates an Urgent Change Request, and email goes out to all of our Managers. One of them will reply all to the email with either an [approval] or [deny] in the message body so Service Manager gets the email and acts on
    it and the other Managers know it was acted on.
    Problem is, if the Manager forgets to add in the Change Requester in the email, they don't know it was acted on. I tried using WorkFlows for Change Request to update the Change Requester of an update but there is nothing in there for  Approval or Deny.
    I then resorted to subscriptions but can't figure out how to configure the subscription so that only the Change Requester gets the email. We can configure different email templates based on the whether the change was approved or denied. Just need to figure
    out how to configure the Recipient.

    I suggest you read this
    which is very close to what you want to do.
    I've checked the link and found it working. Of course, it works only if the RA is a direct child of work item itself (so for RAs encapsulated in SA or PA it doesn't work).
    Below the XML code of the management pack I used. You can engage that, just copy to Notepad and save as ManagementPack.ef9b0adf354c4afe92ede323c9427879.xml
    It might require to customize a mail template cause I made a very simple one.
    <ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="1.1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <Manifest>
    <Identity>
    <ID>ManagementPack.ef9b0adf354c4afe92ede323c9427879</ID>
    <Version>7.5.2905.0</Version>
    </Identity>
    <Name>RA notify affected user MP</Name>
    <References>
    <Reference Alias="EnterpriseManagement">
    <ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Console</ID>
    <Version>7.5.2905.179</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="CustomSystem_Notifications_Library">
    <ID>System.Notifications.Library</ID>
    <Version>7.5.2905.0</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="CustomSystem_WorkItem_Library">
    <ID>System.WorkItem.Library</ID>
    <Version>7.5.2905.0</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="CustomSystem_WorkItem_Activity_Library">
    <ID>System.WorkItem.Activity.Library</ID>
    <Version>7.5.2905.0</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="CustomSystem_Library">
    <ID>System.Library</ID>
    <Version>7.5.8501.0</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="SystemCenter">
    <ID>Microsoft.SystemCenter.Library</ID>
    <Version>7.0.8432.0</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="SystemCenter1">
    <ID>Microsoft.SystemCenter.Subscriptions</ID>
    <Version>7.5.2905.0</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    <Reference Alias="EnterpriseManagement1">
    <ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Administration</ID>
    <Version>7.5.2905.179</Version>
    <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
    </Reference>
    </References>
    </Manifest>
    <Categories>
    <Category ID="Category.6f4a3832d9c3488fa2c31d1d662dceef" Value="EnterpriseManagement!Microsoft.EnterpriseManagement.ServiceManager.ManagementPack">
    <ManagementPackName>ManagementPack.ef9b0adf354c4afe92ede323c9427879</ManagementPackName>
    <ManagementPackVersion>7.5.2905.0</ManagementPackVersion>
    </Category>
    <Category ID="ServiceManager.Console.NotificationManagement.NotificationTemplates.Enumeration6fce0865_32d8_435d_ad64_7c48439649ab.Category" Target="Template_50a8eac21da94bb2a340858b71c931d3" Value="EnterpriseManagement1!ServiceManager.Console.NotificationManagement.NotificationTemplates.Enumeration" />
    <Category ID="Category.804f621f7a2b4e0490c82413cd6479d9" Target="NotificationSubscription_da1aa98f_40c3_4dd5_a227_de3e7f20601e" Value="EnterpriseManagement1!Microsoft.EnterpriseManagement.ServiceManager.Rules.WorkflowSubscriptions" />
    </Categories>
    <Monitoring>
    <Rules>
    <Rule ID="NotificationSubscription_da1aa98f_40c3_4dd5_a227_de3e7f20601e" Enabled="true" Target="SystemCenter!Microsoft.SystemCenter.SubscriptionWorkflowTarget" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">
    <Category>System</Category>
    <DataSources>
    <DataSource ID="DS" TypeID="SystemCenter1!Microsoft.SystemCenter.CmdbInstanceSubscription.DataSourceModule">
    <Subscription>
    <InstanceSubscription Type="bfd90aaa-80dd-0fbb-6eaf-65d92c1d8e36">
    <UpdateInstance>
    <Criteria>
    <Expression>
    <And>
    <Expression>
    <Or>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <Property State="Pre">$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$</Property>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value>{9de908a1-d8f1-477e-c6a2-62697042b8d9}</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <Property State="Pre">$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$</Property>
    </ValueExpression>
    <Operator>NotEqual</Operator>
    <ValueExpression>
    <Value>{144bcd52-a710-2778-2a6e-c62e0c8aae74}</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </Or>
    </Expression>
    <Expression>
    <Or>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <Property State="Post">$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$</Property>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value>{9de908a1-d8f1-477e-c6a2-62697042b8d9}</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    <Expression>
    <SimpleExpression>
    <ValueExpression>
    <Property State="Post">$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$</Property>
    </ValueExpression>
    <Operator>Equal</Operator>
    <ValueExpression>
    <Value>{144bcd52-a710-2778-2a6e-c62e0c8aae74}</Value>
    </ValueExpression>
    </SimpleExpression>
    </Expression>
    </Or>
    </Expression>
    </And>
    </Expression>
    </Criteria>
    </UpdateInstance>
    </InstanceSubscription>
    <PollingIntervalInSeconds>60</PollingIntervalInSeconds>
    <BatchSize>100</BatchSize>
    </Subscription>
    </DataSource>
    </DataSources>
    <WriteActions>
    <WriteAction ID="WA" TypeID="SystemCenter1!Microsoft.EnterpriseManagement.SystemCenter.Subscription.WindowsWorkflowTaskWriteAction">
    <Subscription>
    <VisibleWorkflowStatusUi>true</VisibleWorkflowStatusUi>
    <EnableBatchProcessing>true</EnableBatchProcessing>
    <WindowsWorkflowConfiguration>
    <AssemblyName>Microsoft.EnterpriseManagement.Notifications.Workflows</AssemblyName>
    <WorkflowTypeName>Microsoft.EnterpriseManagement.Notifications.Workflows.SendNotificationsActivity</WorkflowTypeName>
    <WorkflowParameters>
    <WorkflowParameter Name="SubscriptionId" Type="guid">$MPElement$</WorkflowParameter>
    <WorkflowArrayParameter Name="DataItems" Type="string">
    <Item>$Data/.$</Item>
    </WorkflowArrayParameter>
    <WorkflowArrayParameter Name="InstanceIds" Type="string">
    <Item>$Data/BaseManagedEntityId$</Item>
    </WorkflowArrayParameter>
    <WorkflowArrayParameter Name="TemplateIds" Type="string">
    <Item>f7785299-c026-a870-e350-d02b65a1f3b3</Item>
    </WorkflowArrayParameter>
    <WorkflowArrayParameter Name="PrimaryUserRelationships" Type="string">
    <Item>$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='CustomSystem_WorkItem_Library!System.WorkItem']/Path[Relationship='CustomSystem_WorkItem_Library!System.WorkItemAffectedUser' TypeConstraint='CustomSystem_Library!System.User']$</Item>
    </WorkflowArrayParameter>
    </WorkflowParameters>
    <RetryExceptions />
    <RetryDelaySeconds>60</RetryDelaySeconds>
    <MaximumRunningTimeSeconds>7200</MaximumRunningTimeSeconds>
    </WindowsWorkflowConfiguration>
    </Subscription>
    </WriteAction>
    </WriteActions>
    </Rule>
    </Rules>
    </Monitoring>
    <Templates>
    <ObjectTemplate ID="Template_50a8eac21da94bb2a340858b71c931d3" TypeID="CustomSystem_Notifications_Library!System.Notification.Template.SMTP">
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template.SMTP']/Subject$">&lt;1033&gt;$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Id$ is completed&lt;/1033&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template.SMTP']/Priority$">2</Property>
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template.SMTP']/IsBodyHtml$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template']/Content$">&lt;1033&gt;$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Id$ is completed&lt;/1033&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template']/Encoding$">utf-8</Property>
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template']/SeedClass$">System.WorkItem.Activity.ReviewActivity$bfd90aaa-80dd-0fbb-6eaf-65d92c1d8e36</Property>
    <Property Path="$Context/Property[Type='CustomSystem_Notifications_Library!System.Notification.Template']/Protocol$">SMTP</Property>
    </ObjectTemplate>
    </Templates>
    <LanguagePacks>
    <LanguagePack ID="ENU" IsDefault="true">
    <DisplayStrings>
    <DisplayString ElementID="ManagementPack.ef9b0adf354c4afe92ede323c9427879">
    <Name>RA notify affected user MP</Name>
    </DisplayString>
    <DisplayString ElementID="Template_50a8eac21da94bb2a340858b71c931d3">
    <Name>RA notify affected user mail template</Name>
    </DisplayString>
    <DisplayString ElementID="NotificationSubscription_da1aa98f_40c3_4dd5_a227_de3e7f20601e">
    <Name>RA notify affected user</Name>
    </DisplayString>
    </DisplayStrings>
    </LanguagePack>
    </LanguagePacks>
    </ManagementPack>
    Cheers,
    Marat
    Site: www.scutils.com 
    Twitter: LinkedIn:
    Graveyard:
    It does work even if it is within a PA or SA or even deeper, you "just" have to follow the path to the CR from there. But then you would need a subscription for each RA depending on where it is in the flow. Try to make your users understand that :D
    http://codebeaver.blogspot.dk/

  • Reboot the iphone to install a program and has been left all the time with the apple on the screen

    reboot the iphone to install a program and has been left all the time with the apple on the screen.
    takes so hours without turning away. I can do?

    Reset your phone , you wont lose anything. Hold the home and off button down until the apple symbol comes up.

  • How does one show full message headers in Mail 8.1? The previous 'complete header' option has been replaced with a time consuming 'custom' choice.

    How does one show full message headers in Mail 8.1?
    he previous 'complete header' option has been replaced with a time consuming 'custom' choice.

    Customize your toolbar in Mail and add the All Headers button:

  • I had a software (something 6) come up on my iphone so i pressed yes, since then after restarting on its own it keeps saying no sim ! even though my o2 sim has been there all the time?? ive complety restored my iphone still doing the same, help!!!!???

    i had a software (something 6) come up on my iphone so i pressed yes, since then after restarting on its own it keeps saying no sim ! even though my o2 sim has been there all the time?? ive complety restored my iphone still doing the same, help!!!!???

    Dude or hot-spur,
    Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
    Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
    Thank you again

  • How can I "reprompt" when a OBIEE request has been imported into powerpoint

    Hi All,
    How can I "reprompt" when a OBIEE request has been imported into powerpoint using the Oracle Bi plugin for microsfot powerpoint?
    When you import a request into powerpoint it show the prompts you have defined in yout request. How can the user "reprompt" the request in powerpoint?
    Best regards
    H.

    As Silkrooster said, should be easy enough with layer styles and blending modes. To mimic the curvature you can use a simple warp style as well. You may just need multiple duplicates of the layer for ultimate control...
    Mylenium

Maybe you are looking for