Spool Request showing status 'Error'

Hi All
I m facing a problem in Spool generation. When spool requests are generated it goes to status 'Error' when i see it in SP01. I have checked the device status from SPAD and also spool processor from SM51.
What should i do now?
Thanks n Regards
Shashank

Hi
The output of log files is as follows:
SAP spool error log
=====================
Print request processing log
Errors occurred processing this print request
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
The operating system is reporting problems
File system full (file /usr/sap/<SID>/../data/000xJTYv.VRP)
Errors occurred processing this print request
Error during print request output. l_rc = 8
There may be no printout
Rgrds
Shashank

Similar Messages

Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer r

Hi,
Received the below error when I try to run the cobol sample program.
Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running
Any help on this is highly appreciated.
Thanks
Soundappn

Is there something in stderr/stdout ?
You could have a look to that About the template FSCM9.1 FP2 Peopletools 8.52.03 (v4 - July 2012) (part 2) and see if something can help you out.
Nicolas.

Is there any FM to generate spool request for error log of a background job

Hi,
I am going to create a program to create deliveries and do PGI. This program will be assigned to periodic background job.Now whatever errors are generated in program i have to send the error log to spool request.Is there any FM for generating spool request with this error log or how can this be done? Kindly provide sample code if possible.
Thanks.
Nimish Dongare.

Hi Nimish,
How are you doing, This is Shreekant working as ABAP developer, I sow your post in sdn forum, I have a similar requirement like I am changing the delivery taking some data from a flat file which is coming from other system and do PGI. If any error occurs during this process I need to capture it and present it as a report or create log file.. whichever is easier.
Please can u help me how did u achieved this functionality for your requirement?.. pls. can u share some details.
If u don mind, can u give me ur email id to communicate.
Thanks,
Shreekant

SQR Process Run Status Error

Hi All,
I created an SQR which will update the chartfield1 of the employee when they are non-union employees. After we run the SQR Process, we got an Error on the run status. We check the message log of and got this message :
"Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running".
Any idea on what happened and what can we do to solve it? I read some other thread regarding these message and they say that I need to refresh the database or something. Your input will be of great help.
Regards

Hi,
What Peopletools are you using ?
Check if the process scheduler is still running.
Under $PS_HOME/appserv/prcs/domain_name check stderr and stdout files.
Under $PS_HOME/appserv/prcs/domain_name/LOGS check the logs files.
Nicolas.

Problem in converting Spool Request into PDF format

Hi,
I am facing problem to convert spool request (which store output of sap script) in to PDF format. Actually I have converted it with function module 'CONVERT_OTFSPOOLJOB_2_PDF' and it is working properly but the problem occurs where the BOLD fonts are used. I am unable to see the Text/Address where i have used Bold Font in script (PDF FORMAT). Even though in (SPO1) spool request shows every thing perfectly (along with Bold Font). It will great if you could suggest me something.
Thanks,
Pradeep

Hi Pradeep,
Use ,
Closing the Sapscript, we save data (OTF) in a table
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = t_otfdata
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
OTHERS = 5.
DATA: BEGIN OF t_otfdata2 OCCURS 0.
INCLUDE STRUCTURE solisti1.
DATA: END OF t_otfdata2.
Move OTF data to another table with lenght 255
LOOP AT t_otfdata.
CONCATENATE t_otfdata-tdprintcom t_otfdata-tdprintpar INTO t_otfdata2.
APPEND t_otfdata2.
ENDLOOP.
Convert OTF format to PDF
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
format_src = 'OTF'
format_dst = 'PDF'
devtype = 'PRINTER'
FUNCPARA =
len_in = len_in
IMPORTING
len_out = len_out
TABLES
content_in = t_otfdata2
content_out = t_pdfdata
EXCEPTIONS
err_conv_failed = 1
OTHERS = 2.
Have a look at Progs. RSTXPDF4 and RSTXPDFT2 for converting the Spool to PDF.
Regards,
Raj
Message was edited by: Rajasekhar Dinavahi
Message was edited by: Rajasekhar Dinavahi

Quote as System Status error

Hello Experts,
I am working on CRM Sales, I have one issue to solve.
I have created a Quote in CRM and from that I have to create a follwup Order.
After I created Quote, it is showing Status error .
the error message is: The System Status DEF( I1030 ) is in Active status. because of this error I am unable to create an Order.
Please help me to solve this isue.
Thanks

Hello,
I have the same problem. Did you solved your problem and can you remeember the way?
Kinde regards
Arndt

Exam status Error

Hello everyone,
I gave 1Z0-228 test day before yesterday.
When I clicked 'Finish', it showed the score report (result - pass).
Then I clicked 'End' button and I was told that this will automatically print the score report.
But it didn't do anything. I tried several times and the exam session was totally irresponsive.
Finally the test center guy printed my score report manually (right click -> print) and he restarted PC.
Now when I log in PearsonVUE website, it shows status ERROR against the appointment.
I am worried, what happens to my exam result? and will the record be pulled in CERTVIEW or not?
Can anybody throw some light on this?
Has anybody faced similar situation before?
Thanks,
Sanket
Edited by: user7128751 on Dec 30, 2009 10:52 PM

user7128751 wrote:
Hello everyone,
I gave 1Z0-228 test day before yesterday.
When I clicked 'Finish', it showed the score report (result - pass).
Then I clicked 'End' button and I was told that this will automatically print the score report.
But it didn't do anything. I tried several times and the exam session was totally irresponsive.
Finally the test center guy printed my score report manually (right click -> print) and he restarted PC.
Now when I log in PearsonVUE website, it shows status ERROR against the appointment.
I am worried, what happens to my exam result? and will the record be pulled in CERTVIEW or not?
Can anybody throw some light on this?
Has anybody faced similar situation before?
Thanks,
Sanket
Edited by: user7128751 on Dec 30, 2009 10:52 PMPersonnally I would contact Pearson VUe in the first case for their response:
[http://www.pearsonvue.com/oracle/contact/]
Ensure you get an incident number.
My suspicion is your Client machine at the test cener did not manage to upload its result to the Test center server which did not upload the success to the Pearson VUE central Systems. One hopes a later upload will get the success status through, and teis may clear itself i a day or too.
However IMHO you should contact Pearson VUE immediately for their response indicateing the distress and worry it is causing you. And ensure you get an incident number and ask for an explanation.
(It is an unfortunate thing that a PC may break down on a test from time to time; however their systems are meant to recover from this).
In terms of Certview in all cases this would appear only a wek or two after you take the test, so it it isn't showing properly on the Pearson Systems a successful result is unlikely to be passed to Oracle.
Rgds - bigdelboy.
Please note this advise is not authorative I hope however it contains rasonable suggestions.

Not able to print to locl printer, spool request status is in wait

Hi All,
When user print to locl printer, the spool request is created and we get a error message saying "connection closed after (protocol) error (RC=1)". And we found the status of spool request is in wait state and if double clicked on it, it is showing "Internal error printing".
Below is the log of Spool work process for your reference
Found unqueued job 21701/1 (LOCL)
ERROR => Printer LOCL: Lookup failed ?!?!? -> Status DELAY http://rspopcc. 0813
Just to update you user is able to print all other documents except the documents from SAP application. And user is connecting to SAP application server through Citrix.
We are on HP-UX, Oracle database and SAP R/3 3.1i version.
Thanks in advance.
Regards,
Chandrika

sundaresh suryanarayan wrote:
Hello Chandrika,
>
> Is this printer is a network printer ?. Use Device Type : SWIN and Access Method : G Front End Printing .
>
> Thanks
>
> Sundaresh Suryanarayan
Hi Sundaresh,
Thanks for your reply.
Yes it is a network printer. User is printing to his default printer(LOCL, with host printer __DEFAULT) and we are using device type SAPWIN and access method F(printing on front end computer).
Regards,
Chandrika

An error occurred when processing the spool request. (Possibly due to memory problems)

Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
Mohammed

Hello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai

Spool request internal error

Dear All,
When I am executing a report in background using tcode se38, I am not able to view the output of the report from the spool request .
When I try to view the contents of the spool request, It simply gives a message
as follows :
Request 74837 in system PRD : internal error
00000040/ in spooler.
Please advice me on this issue.
Thanks
Gaurav

hello Gaurav,
it is coming because the columns in spool is exceeding the SAP defined limit of 255. Either you need to create a device type with columns greater than 255 or else use the OSS note: 186603. It has a simple report ZRSPOSHOWLIST that you need to create in your system. I created this report and now whenever i have such errors I use it to view the spool.
regards.
Ruchit.

Write the Error log from background Job to the Spool request

Hi ,
I have a situation where in i need to capture the error log of a Z program which runs as a background job and write that log into the spool request. My Z program calls runs RSEINB00 program using the SUBMIT statement. When this Job fails the error log can be seen in SM37. But i need this error log to be sent in to a spool.
I can read the error log using the BP_JOBLOG_READ FM and can also create a spool using the RSPO_SPOOL_OPEN FM.
The problem is, when the Submit statement executes, due to internal valdation in the RSEINB00 program the program terminates. Due to this it is not able to perform the SY-SUBRC Check and thus doesn't read the log.
Can anybody suggest me how to overcome this problem. I am attaching the code for your refernece.
SUBMIT RSEINB00
 USING SELECTION-SET 'TEST2'
 TO SAP-SPOOL
 LIST NAME 'LOCL'
 IMMEDIATELY space
 KEEP IN SPOOL 'X'
 AND RETURN.
If sy-subrc <> 0.
 CALL FUNCTION 'BP_JOBLOG_READ'
 EXPORTING
 CLIENT = SY-MANDT
 JOBCOUNT = i_tbtco-jobcount
 JOBLOG = i_tbtco-joblog
 JOBNAME = i_tbtco-jobname
 TABLES
 JOBLOGTBL = l_joblog
 IF SY-SUBRC <> 0.
 else.
 message i002 with l_joblog-msgv1.
 ENDIF.

ENDIF.
Rgds,
Kewal
P.S. : any other approach to solve this problem will be appreciated too and the points will be rewarded suitably.

If I select a job in SM37 and I click on "spool" I get a list with separate spool entries for each of the steps, e. g.
Programmname/Kommand Programmtyp Spoolliste
Z_MM_STAT_UPDATE_WERK ABAP 1707445
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_WERK ABAP 1707459
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_MARA ABAP 1721423
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_WERK ABAP 1721437
Z_MM_STAT_UPDATE_MARA ABAP 1721446
Z_MM_STAT_UPDATE_WERK ABAP 1721447
Z_MM_STAT_UPDATE_VKORG ABAP 1721471
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_VKORG ABAP 1721521
ZSLEEP Ext. Kommando
Z_MM_STAT_UPDATE_VKORG ABAP 1721816
It's in German but I'm sure you get the idea. For each Z_MM_STAT_UPDATE and variant I have a separate spool list that I can display.
Markus

Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Spool request Error

HI Experts,
MOst of the time Users encounter Spool Request Error while giving printouts. So for that Ihave to manualy delete sppol requests from SP01. Is there any where I can Schedule Programm where I set parameters to delete spool requests before reaching its maximum limit. Urgent.
Thanks.
Khan

Hi Khan,
Try this FM RSPO_R_RDELETE_SPOOLREQ.
Have a look in this post
How I set the auto delete old spool request
Regards,
Satish

Regarding Error. Description Spool Request

Hi all,
How do we get error description of a spool request in a program , iam able to catch the spool no , but iam not able to get the error description of the same.
Thanks & Regards,
Kishore Kumar Yerra.

Hi,
TSP01 to TSP14 are all tables related to Spool.
But why are you looking out for error description ?
Best regards,
Prashant

Submitting Customized Report Request, Completed with Error Status

Dear All ,
Good Day ,,
1- I am using Oracle Application 11.5.0
2- Application And Data Base Server Unix AI
3- created Oracle Report file (i testes all sql statmets using toad , successfly)
5- Tested the report , passed parameters , it is running successfully .
6- Cpied the reports to the next path (E:\oracle\testappl\per\11.5.0\reports\US)
7- Created Executable file (has the same name of the rdf file)
8- Created Concurrent program contains the same Executable file and the output format is 'PDF', Style = 'Landscape' , printer = 'noprint' , the added the parameters (the same named in the rdf file)
9- Added the Concurrent program to the HRMS 'Reports & Process'
10- From the HRMS Manager Responsibility , i submitted the request , passed the parameters .
11- Refresh , Pending , Runing , phase 'Completed' , Status 'Error'
12-View Log .. :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:29:55
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3192426.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-MAR-2010 23:29:56
12-When i change the output format to XML it completes with 'Normal Status' but , the next Log is appearing :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:36:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Wed Mar 31 23:36:20 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 3192428
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 31-MAR-2010 23:36:21
Thanks A lot

>
emsg:was terminated by signal 4
>
For this issue , pl see the solutions in this related thread - Re: The Concurrent Manager and Programs is failing random
>
REP-3000: Internal error starting Oracle Toolkit.
>
This typically indicates that an X server is not running on the Unix server. Pl see these MOS Docs
200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
207532.1 - Troubleshooting Tips for REP-3000 Error when Running PDF/POSTSCRIPT/HTML Reports
Searching on this topic in these forums will also retrieve many hits.
HTH
Srini

Spool Request showing status 'Error'

Similar Messages

Maybe you are looking for