Spool requests are being sent the the B9 printer queue(RSNAST00).

Hi gurus,
has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

Post Author: Stephen@Azzu
CA Forum: General
Nobody know the answer to this one? Stephen@Azzu:Here's a good one...I'm using Crysal Reports XI (fully service packed) and the reports I have created are being used in a VB.Net application. I have no problems whatsoever in printing the reports, everything is fine. However, when the report is sent to the printer, the printer queue displays 'document' as the, err, document name. I'd like it to say something more relevant, such as the document number the user selected.So I've tried setting the ReportDocument.Name but wait, it's read only!? How about the summary info? No change. Filename? No change either. I've browsed the internet, searched the knowledge base and found nothing. So my question is this...How do I get the printer queue to display an appropriate name for my document?Stephen

Similar Messages

Spool requests are being sent the the B9 printer queue.

Hi gurus!
has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

My bill receipts are being sent to old Apple ID email though I have changed it.

Since changing my Apple ID all my bill receipts are being sent to the old email address though I have changed it. I have changed the primary address AND the secondary as well. What do I do to have the receipts/emails sent to the new emailing address?

Yes, absolutely, you can still use the old ID to update, etc., but I understood the OP to want to simply discard the old one and use only the new one. Maybe I misunderstood...
And, actually just now re-reading the first post, it could be that the ID had only been associated with the iDevices, so if he established a new ID and associated that with the new MBP, I frankly have no idea if he can still use the old ID on that machine (based on him saying that the old ID is greyed out) - have not come up with this type of situation before.

How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.

How do I change the phone number attached to my Icloud? All the codes and stuff are being sent to my old number.

Hello Babyygrl23,
Welcome to the Apple Support Communities!
It sounds like your iCloud Apple ID has a phone number associated with it that you would like to update. If this is the case, after signing in to the linked website below, you will see a section on the left side of the screen labeled Phone Numbers. You can edit the phone number associated with that account from there.
Apple - My Apple ID
Cheers,
Joe

My wife and I have been texting on our iPhones. All of the sudden all messages are being sent as text. We cannot seem to make the iMessage work.

My wife and I have been texting on our iPhones. All of the sudden all messages are being sent as text. We cannot seem to make the iMessage work. Any ideas?

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac" maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well. I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

Since updating to OS5, my text messages are being sent as e-mails. Also, my contacts do not show the people's phone

Since updating my iPhone 4 to iOS5, it seems my texts are being sent as e-mails or in e-mail form. The person I am texting gets a phone number and not my name. Also, when I click on contacts to text to, where it used to show the phone number and I would touch the number to text, it just shows the persons name, no phone#.
Thanks for any help!
Kerry

Settings > Messages > Send and Received > Uncheck any number/email that does not belong to the device
Note: The little blue (>) will give you an option to remove the number/email from the device
Note: Check this setting on any device(s) using the same Apple ID

The email where security questions are being sent is invalid. How do I change it

The email where security questions are being sent is invalid. How do I change it.

You cannot change your Rescue email address after you have forgotten your Security Questions. Once you get everything reset, you will be able to change it. For now, you are going to have to contact Apple Support to get them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

How can I attach several images to my Outlook Mac 2011 email message and have all of the images reduced in size while they are being sent out. Thank you

https://discussions.apple.com/message/11994130#11994130

I have the 4s and my texts are being sent out by my email...not my cell

I have the 4s and my texts are being sent out by my email...not my cell

Hi,
1. Go into Settings
2. Messages
3. Send and Receive
4. Start conversations from > Tap you phone number
Cheers

My imessages are being sent on multiple phones and i deleted the icloud account on the other phone but the messages still go through how do I stop this?

my imessages are being sent on multiple phones and i deleted the icloud account on the other phone but the messages still go through how do I stop this?
Do you think deleting the message off the phone would make a difference?

If you don't enter an e-mail address, it just uses SMS and MMS. iMessages (sent over the data connection instead of using your SMS messaging plan) require an e-mail address registered on the device.
There is no requirement that you activate it.

HT5622 I have incorrectly entered an email address that is not valid. I have requested the change to the correct email but if cannot verify it as the verification email is being sent to the email address that I entered incorrectly and is invalid. Help!

I have incorrectly entered an email address that is not valid. I have requested the change to the correct email but if cannot verify it as the verification email is being sent to the email address that I entered incorrectly and is invalid. Help!

Hey Givemepaperandapen,
Thanks for using Apple Support Communities.
For more information, take a look at:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
How to edit or change your Apple ID and primary email address
Have a nice day,
Mario

How may spool request can I create in the backend?...

Hi Experts,
How may spool request can I create in the backend? If yes, is there anywhere in the system can I set this value to increase number of spool request per user.
Is there any condition which can prevent me create a new spool request?
Yes all of the answer above is answered, so is there any offfical document from SAP states them.
Thanks!
- Anthony-

Thx for the feedback. But, in fact, what was the real issue, originally?
I forgot to inform you of that:
1) [Note 193638 - Calculating spool number from file names as of 4.0A|http://service.sap.com/sap/support/notes/193638] (indicates the algorithm of UNIX file names). This note also indicates "For Release 4.0A, the maximum spool number has been increased from 99000 to 2000000000. The maximum number of output requests per spool request has been increased to 32767 as well."
2) I think I forgot one of your initial questions:
> Is there any condition which can prevent me create a new spool request?
By default, SAP tries to append pages to existing spools with same characteristics. If they are always different, a new spool request is always created. So, you may change some characteristics so that they are identical and SAP will reuse existing spools. See rules in [Note 85318 appending documents to existing spool requests|http://service.sap.com/sap/support/notes/85318].

How to list all the datatypes are being used in the database?

Is there any way you can list all the oracle datatypes are being used in the database?
Thanks,
Chau

Use USER_TAB_COLUMNS or DBA_TAB_COLUMNS to determing various data type but USER_TAB_COLUMNS will show you what type being used by a schema user

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

*Ralph Johns* writes:
"Your options are:
Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
Do you mean a trial account from .Mac? (DotMac)
"Get an AIM Screen name and set it to Display what you want as you set it up.
The Screen name can be whatever yu want but you can also set it to display something else as well."
I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
Thanks very much for taking the time to reply, though.

Re-sent Sent Email In Outlook 2010 Showing as Being Sent to the Previous Recipient

When re-sending a previously sent item from within Outlook 2010, after a few seconds, the newly re-sent email is showing as being sent to the last recipient who the email is sent to. For example;
I send an email to [email protected] I then want to send the email to [email protected].. so I click Sent Items, double click the email I have just sent, on the Message tab in the Move group, I click Actions and then click Resend This Message.
I remove the original recipient and add the new recipient and click Send.
I check my sent items a few seconds later and the newly sent email ([email protected]) is showing as being sent to [email protected] However, the re-sent email has actually be sent to the correct recipient.
I would appreciate any advice on this.

Hi,
I assume this issue is related to the corrupted nickname cache. Does this issue occur with certain recipients? If so, I suggest you remove the nickname cache entries of these recipients:
Open a new email message.
Type the first few characters of the nickname cache entry that you want to remove from the cache.
When the entry appears in the list of suggested names, move your mouse pointer over the name until it becomes highlighted, but do not click the name.
When the “X” icon appears next to the highlighted name, click X to remove the name from the list.
If this happens to all recipients, we can consider to reset the whole Outlook nickname cache for Outlook 2010:
Open Outlook 2010.
On the File tab, click Options.
Click the Mail tab.
Under Send Messages, click Empty Auto-Complete List.
Click Yes.
I hope the information is helpful to you.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Spool requests are being sent the the B9 printer queue(RSNAST00).

Similar Messages

Maybe you are looking for