Spool status - error no authorization

Hi All,
There is a background job which is generating the report in spool. It has the status has Incorrect (No authorization).
It has total number of pages: 3.000 and giving the error as "No authorization for this number of pages".
how and where to provide the authorization to avoid this error.
Thanks in advance.
Regards
Ramesh.

Hi,
have a look into authorityobjekt: S_SPO_PAGE.
Hope it helps.
Regards, Dieter

Similar Messages

Spool Request showing status 'Error'

Hi All
I m facing a problem in Spool generation. When spool requests are generated it goes to status 'Error' when i see it in SP01. I have checked the device status from SPAD and also spool processor from SM51.
What should i do now?
Thanks n Regards
Shashank

Hi
The output of log files is as follows:
SAP spool error log
=====================
Print request processing log
Errors occurred processing this print request
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
OTF module: Failed to output print data
The operating system is reporting problems
File system full (file /usr/sap/<SID>/../data/000xJTYv.VRP)
Errors occurred processing this print request
Error during print request output. l_rc = 8
There may be no printout
Rgrds
Shashank

Redwood CPS job goes to status ERROR but job works completes ok in SAP

Hi
When I schedule a particular ABAP job to run in SAP from Redwood CPS it always completes with the Error status in CPS, but the job runs okay and ends in the Finished status in SAP.
I tried a different ABAP job and this ran okay, with the CPS status going to Completed.
I had a look at the CPS log files for the Erroring job and there were no errors in the 'log' file but in the 'step1/spool1' file there is the line 'Processing completed with errors'. Is CPS doing a little more than SAP as regards checking job statuses and looking in the spool file for errors?
Checked the operator messages and all it says is:
Job 1501323 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London)) has aborted due to at least one error while running the jobs in step: Job 1501324 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London))
- doesn't elaborate why the job has status Error.
Is this saying the CPS part had an error or the ABAP part??
Ross

Hi Anton
I checked the Return Code Mapping for this system and it is empty. No post running action or a trigger has been configured.
The first time I was having the error was after setting up a 2 step job chain. When I got the error (and the second step didn't run) I then submitted this first simple step from the job definition SAP_AbapRun in case there was an issue with the way I'd configured the chain; it still errorred though. All I am specifying is the ABAP program name, SAP job name, variant and queue to run on, and it does run okay in SAP.
When you say "The actual error should be available in the logfile of the SAP job itself" do you mean the joblog as viewing in SM37? There are no errors in there.
I'll have a play with the Return Code Mapping part as if CPS does search the spool for errors (perhaps by default?) and sets the status to error in CPS, I don't want it to stop the chain - although I guess I can always set the post action of step 1 to 'on error' 'continue'...
Cheers
Ross

Spool status

hi,
could i know in which table are the spool status like "Error", "Waiting" etc... that we see in sp01 stored.
cheers,
Aditya.

Hi Aditya,
<b>The table is TBTCP.</b>
You can use FM <b>BP_JOB_READ</b> to check the status.
The status would be available in JOB_READ_STEPLIST-STATUS.
Best regards,
Prashant
Pls mark points for helpful answers

Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE

Hi All,
I am getting Error when i am viewing my salary slip in ESS.
The Error i am getting is :
Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE
So can anybody help me out in this.
Regards,
Dhruv Shah

Solved the Error by deleting the spool in the Backend.
Spool was overflow.
Regards,
Dhruv Shah

Error in Authorization even after giving Colon authoriztion to users

Dear Experts
We have built a query which is having Sum GT function used and also Constant for some characterstics.
But when we execute the query the user is getting not authorized message. If i run the query without the SUM GT and Constant RKF and CKF its running fine.
We have checked the rsec log for the error it says Colon authorization is required for the some chars which are authorizaiton relavant but we have given all the other chars : authorization but still i am getting the below message.
Authorization Check Log
For a general description see the Note 1234567
Date and Execution Time (Local Server)
Execution Date: 01.12.2011
Execution Time: 15:33:23
Executed Query: ZM_SD_M22/ZM_SD_M22_Q_00010
Transaction RSRT ( BW - output test )
Executed by User P00010784
Executed with Analysis Authorizations of Another User P00007960
Software Component Release Level Support Package
SAP_ABA 700 0021 SAPKA70021
SAP_BASIS 700 0021 SAPKB70021
SAP_BW 700 0023 SAPKW70023
InfoProvider Check
Building the Buffer...
...Buffer Built
Are there authorizations for accessing InfoProvider ZM_SD_M22 with activity 03?
Authorization exists for general access to InfoProvider ZM_SD_M22 with activity 03
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider ZM_SD_M22:
0DF_HRPOSTN
ZCUS_MAT__ZSD_HEQT
ZC_CUST__ZSD_HEQT
ZSD_HEQT
Authorization Check
Detail Check for InfoProvider ZM_SD_M22
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
Subselection (Technical SUBNR) 2
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
Check Added for Aggregation Authorization:     0DF_HRPOSTN
Check Added for Aggregation Authorization:     ZCUS_MAT__ZSD_HEQT
Check Added for Aggregation Authorization:     ZC_CUST__ZSD_HEQT
Check Added for Aggregation Authorization:     ZSD_HEQT
Authorizations missing for aggregation (":")
Characteristic 1        2       3
0DF_HRPOSTN    Node      I EQ :      I EQ :
ZCUS_MAT__ZSD_HEQT    I EQ :      I EQ :      Node
ZC_CUST__ZSD_HEQT    I EQ :      I EQ :      I EQ :
ZSD_HEQT    I EQ :      Node      I EQ :
Entries marked with red do not have aggregation authorization
You can find more information about this here 1140831
The authorization check stops here as this selection is no longer needed
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
Subselection (Technical SUBNR) 2
Supplementation of Selection for Aggregated Characteristics
Check Added for Aggregation Authorization:     0DF_HRPOSTN
Check Added for Aggregation Authorization:     ZC_CUST__ZSD_HEQT
Check Added for Aggregation Authorization:     ZSD_HEQT
List of authorizations that provide authorization for selection on ":" (aggregation):
Characteristic 3
0DF_HRPOSTN    I EQ :
ZC_CUST__ZSD_HEQT    I EQ :
ZSD_HEQT    I EQ :
Please guide me what else is required to get the report running.
Thanks and Regards
Sree
Edited by: CRMKNW on Dec 4, 2011 9:43 AM

Shivraj,
I have done the way to display the authorization but still its giving the error no authorization and for change i have removed the Auth relavant Char from the filter which is having the variable (authorization type ) now its showing the report but four Key figure columns are not shown.
These key figure columns are SUM GT function which will bring the total value of a characterstic. So where am i going wrong because as i have given the : authorizaiton it should give the aggregated value for these columns and give full details for his authorized zone.
if i don't add the variable its giving all the data without these four key figures what i am expecting is it should give data for the authorized zone but also show the aggregated value in the SUM GT key figures as they are authorized with : authoriztion.
Thanks and Regards
Sree

Status error in workflow while changing personnel admin in pa30

HI,
I have created a leave request in PA30, so that a workflow has to trigger, for personnel admin i am using custom rule for agent selection. I am following error in inbox instead of work item.
Workflow 1712 set to status ERROR
Please repair the suspended workflow
Context Information:
ID: 1712
Work Item Text: hd
User: WF-BATCH
Language: E
SAP System: SCD
Client: 200
Press 'Execute' to display the workflow that has errors.

hi,
Thanks for the reply.
I am getting error messages as follows;
1. error when starting workitem 000000001791
2. error when processing node 0000000018
3. error when creating a component of type step
4. error when creatind a work item
5. agent determination for step 0000000018 failed
6. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for item
7. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
9. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
10. Work item 000000001791: Object FLOWITEM method EXECUTE cannot be executed
The exceptions are,
process_node, create, create_wim_handle, create_via_wfm, execute, cl_swf_bnd_binding->execute, get_value_ref, eval_bor_atrrib_access-code.
I have used the method approveinteractive in task in custom workflow and also custom rule for agent selection. I did binding between the mentioned employeet.admingrp ,,, to the variables declared in rule container.

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Material statuses error message should go after entering Trackin No in PO

Hi All,
I have created one Material statuses with error message, I have created material with the use of that material statuses..
Its working fine,At the creation of PR, PO I'm getting that Error message..
My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
Is it possible?? how to do it?? plz help me...
Is it possible in standard SAp???
thanks and regards
rames reddy

Hi,
You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
And then assign field selection key to PO Document type and save.
SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
The same you can do for PR document type by having a field selection key for PR document type.
Regards,
Biju K

Print spooler log error ID 808 [Internet Explorer 11 + MS Office 2003 x86 on Win7 sp1 x64 ONLY!]

howdy all,
Could you please help me to resovle the very much odd issue of HP Priner driver on Win7sp1x64 as below.
1.HP Deskjet 970Cse printer connected thru usb to a router and installed to all LAN PCs thru a standard tcp/ip ports works well (i.e. printing anyting w/o any problem) on 3 PCs - 2 of 3 with win7sp1x64; and 1 of 3 - win7sp1x86. All 3 with
IE11[11.0.9600.17041] recently(!) updated from IE8.
2. However BOTH (that is 2 of 3) above PCs of win7sp1x64 return errors to admin log every time when printing any web page from IE11 and/or docs from Office as below:
Error in short:
The print spooler failed to load a plug-in module C:\Windows\system32\spool\DRIVERS\x64\3\UNIDRVUI.DLL, error code 0xc1. See the event user data for context information.
This error in log occurs only if printing from IE11 and/or MS Office. None of other printing jobs are affected including a printing from Acrobat, ACDSee, Google Chrome and Opera. The printing of Test Page by printer
itself not affected as well!!!
3. win7sp1x86 PC prints everything w/o any errors in log!
4. Printer uninstall incl. cleaning of Print Server config + clean install doesn't work.
5. Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\..>printui /s /t2
C:\Users\..>filever c:\windows\system32\spool\drivers\x64\3\*.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     55,432 09-23-2012 adobepdf.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     26,768 09-23-2012 adobepdfui.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp     39,048 09-23-2012 adregp.dll
--a-- W32x64 DLL ENU      11.0.0.305 shp 1,294,472 09-23-2012 aduigp.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    623,104 11-21-2010 fxsapi.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    380,416 11-21-2010 fxsdrv.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp 6,566,400 11-21-2010 fxsres.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    434,688 11-21-2010 fxstiff.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    160,256 11-21-2010 fxsui.dll
--a-- W32x64 DRV ENU 6.1.7601.17514 shp    156,672 11-21-2010 fxswzrd.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp    522,240 06-22-2009 hpf900al.dll
--a-- W32x64 DLL ENU        0.20.6.0 shp 1,692,672 05-07-2008 hpfimg50.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp     79,872 05-07-2008 hpfud50.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp    134,144 06-22-2009 hpfui50.dll
--a-- W32x64 DRV ENU 0.3.7601.18126 shp 1,402,880 04-10-2013 jnwdrv.dll
--a-- W32x64 DRV ENU 0.3.7600.16385 shp     98,816 07-14-2009 jnwdui.dll
--a-- W32x64 DLL ENU         1.0.0.1 shp     16,384 09-20-2010 oemps.dll
--a-- W32x64 DRV ENU 0.3.7601.21853 shp    854,304 12-04-2013 ps5ui.dll
--a-- W32x64 DRV ENU 0.3.7601.21853 shp    636,704 12-04-2013 pscript5.dll
--a-- W32x64 DRV   -       0.3.151.3 shp     47,392 12-08-2013 tpprn.dll
--a-- W32x64 DLL ENU     7.15.297.19 shp    172,328 12-08-2013 tpprnui.dll
--a-- W32x64 DLL   -     7.15.297.20 shp     75,512 12-08-2013 tpprnuichs.dll
--a-- W32x64 DLL CHT     7.15.297.21 shp     75,544 12-08-2013 tpprnuicht.dll
--a-- W32x64 DLL   -     7.15.297.22 shp     80,208 12-08-2013 tpprnuicsy.dll
--a-- W32x64 DLL DEU     7.15.297.23 shp     81,704 12-08-2013 tpprnuideu.dll
--a-- W32x64 DLL   -     7.15.297.24 shp     80,200 12-08-2013 tpprnuiell.dll
--a-- W32x64 DLL ESN     7.15.297.25 shp     80,712 12-08-2013 tpprnuiesn.dll
--a-- W32x64 DLL   -     7.15.297.26 shp     81,208 12-08-2013 tpprnuifra.dll
--a-- W32x64 DLL   -     7.15.297.27 shp     80,224 12-08-2013 tpprnuihun.dll
--a-- W32x64 DLL JPN     7.15.302.41 shp     76,656 12-08-2013 tpprnuijpn.dll
--a-- W32x64 DLL   -     7.15.297.29 shp     76,568 12-08-2013 tpprnuikor.dll
--a-- W32x64 DLL   -     7.15.297.30 shp     80,176 12-08-2013 tpprnuiplk.dll
--a-- W32x64 DLL   -     7.15.297.31 shp     79,680 12-08-2013 tpprnuiptg.dll
--a-- W32x64 DLL   -     7.15.297.32 shp     80,728 12-08-2013 tpprnuirus.dll
--a-- W32x64 DLL   -     7.15.297.33 shp     80,184 12-08-2013 tpprnuitha.dll
--a-- W32x64 DLL   -        7.9.30.2 shp    152,816 12-08-2013 tpps.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    479,232 11-21-2010 unidrv.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    884,224 11-21-2010 unidrvui.dll
--a-- W32x64 DRV ENU 0.3.7601.17514 shp    762,368 11-21-2010 unires.dll
6. C:\Windows\System32
spoolss.dll = v6.1.7600.16385
spoolsv.exe = v6.1.7601.22149
C:\Windows\SysWOW64
spoolss.dll = v6.1.7600.16385
spoolsv.exe = v6.1.7600.16385
7. I blame IE11 when there was no such error before its update from IE8.
8. This is a re-repost from here "http://answers.microsoft.com/en-us/ie/forum/ie11-windows_7/print-spooler-log-error-id-808-internet-explorer/f52ff25c-4702-4ce3-827e-e1e9a5d324cf" and here "http://social.technet.microsoft.com/Forums/windows/en-US/7b24d6b9-171a-4703-82f9-81cb4732e02f/print-spooler-log-error-id-808-internet-explorer-11-ms-office-20032007-x86-on-win7-sp1-x64?forum=w7itproappcompat"
w/o any good answer!
That's it. Any questions are welcome.
Thank you.
PS: I just wanna confirm that this odd error occurs only when printing from IE11 and MS Office 2003 on Win7sp1x64. MS Office 2007 is not affected!

OK, Z COMPLETE SOLUTION FOUND!
Although z cause of this odd issue is yet unclear. However it seems to be z HP driver problem after all.
Actually my printer is not HP Deskjet 970Cse but HP Photosmart 1115 Series. Z very nice working dinosaur, which was officially run out by HP Support from WinXPx86 times. Though it was always working
just nice with either HP Deskjet (DJ) 970Cse Win7driver (better) or HP Photosmart (PS) 7200 Series one (worse – when it works no so good with TCP/IP printer installation).
Well… when I got into z recent problem with DJ970cse driver I happened to check if printer works with z PS7200 one. Oops, same not good as before but NO LOG ERROR! A bit of study gave me understanding
that both drivers are using z absolutely same core files but PS7200 driver uses its own PCL Language Monitor as well as z Print Processor (not a standard winprint of Windows).
And while I unfortunately got no any reasonable ideas on how to solve this issue from IT Pros and others MS MVP during a few days after my posting here and there, except those very smart ones
like ‘uninstall, reboot and install again’, I had no option other than to find solution by myself.
I’ve downloaded a bunch of HP printer models Win7x64 driver pack from MS Update Catalog "http://catalog.update.microsoft.com/v7/site/Search.aspx?q=hp%20deskjet%20970cse" (x86 also available.
This driver pack is for maybe over 400 HP printer models incl. both DJ970Cse & PS7200) and modded its genuine INF file for HardwareID of my PS1115 as HPPHOTOSMART_11150FFF with use of 970Cse driver but also some DLLs and PCL Language Monitor
of PS7200 one.
This modded by me INF file is attached as a Code Block. Pls be advised that all originally integrated printer devices strings except DJ970cse & PS7200 ones were deleted for convenience and
z 1 new combined string for PS1115 added. Then everybody interested can compare & track z changes done. This modded driver is now installed and working w/o any glitch on 2 of my Win7sp1x64 PCs. Although I’ve maybe spent totally a day or
so on all that fuss of posting about & studying around.
My final conclusion is z very much common one
– f**k HP… and/or MS as well, when it’s yet unknown why this error occurred after z years of no problem use of DJ970Cse driver but after Win7sp1 updating to IE11 and/or KB2775511 and only with x64 version
of OS.
bye for now.
PS: btw, why I’m not able to attach any small text file or post a link to MS site here???!!!
END
UPDATE 2014-06-12-Thu: there is one more small glitch of printing to paper from IE11 only found! now it's about a Print Processor settings...
pls set not any hp oem print processor but z standard windows one aka 'winprint' to be used for printing in Printer properties > Advanced sub-menu, otherwise a printout is incorrect in part of a printed page header &
footer. a page print preview is ok but z printed header is incomplete = cut at right side, and no footer printed at all.
pls be advised that above note is valid for both modded & genuine driver installed and for both x86 & x64 win7...
rgds,
; Windows Inbox Printer Drivers
[Version]
Signature="$Windows NT$"
Provider="Microsoft"
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
CatalogFile=prnhp001.cat
DriverVer=06/21/2006,6.1.7233.0
[Manufacturer]
"HP"=HP,NTamd64
[HP.NTamd64]
"HP DeskJet 970Cse" = HPFDJ97E.GPD,HEWLETT-PACKARDDESKJ8FFF,HP_DeskJet_970Cse ; Hardware ID
"HP Photosmart 1115 Series" = HPFDJ97E.GPD.ICM_LH_PHASE5,HPPHOTOSMART_11150FFF,HP_Photosmart_1115_Series ; Hardware ID
"HP Photosmart 7200 Series" = HPP7200T.GPD.ICM_LH_PHASE5,hpphotosmart_7200_se8fD3,hpphotosmart_7200_se5294,HP_Photosmart_7200_Series ; Hardware ID
[OEM URLS]
"HP"="http://go.microsoft.com/fwlink/?LinkID=37&prd=10798&sbp=Printers"
[Previous Names]
"HP DeskJet 970Cse"="HP DeskJet 970C Series"
[ControlFlags]
ExcludeFromSelect=HWPC211,HWP2250,HWP2286,HWP2284,HWPC212,HWP2140,\
HWP21A0,HWP20F0,HWP2160,HWP20D0,HWP20E0,HWP2100,HWP21B0,HWP21E0,\
Hewlett-PackardHP_LaD4FF,Hewlett-Packardhp_LaFBC4
[HPFDJ97E.GPD]
[email protected],@HPFUD50.DLL,@HPFUI50.DLL,@HPFIMG50.DLL,@HPF900AL.DLL,@HPFDJ97E.GPD,@HPFDJ970.GPD,@HPFDJ97X.GPD,@HPFNAM50.GPD
DataFile=HPFDJ97E.GPD
CoreDriverSections="{D20EA372-DD35-4950-9ED8-A6335AFE79F0},UNIDRV.OEM,UNIDRV_DATA","{D20EA372-DD35-4950-9ED8-A6335AFE79F3},sRGBPROFILE.OEM"
[HPFDJ97E.GPD.ICM_LH_PHASE5]
CopyFiles=HPC_COMMON_LH,HP_PRNPROC,@HPFDJ50.INI,@HPFUD50.DLL,@HPFUI50.DLL,@HPFIMG50.DLL,@HPF900AL.DLL,@HPFDJ97E.GPD,@HPFDJ970.GPD,@HPFDJ97X.GPD,@HPFNAM50.GPD,@HPZEVLHN.DLL,@HPZSTLHN.DLL,@HPZUILHN.DLL,HP_LANGMON
DataFile=HPFDJ97E.GPD
LanguageMonitor="PCL hpz3llhn,hpz3llhn.dll"
PrintProcessor="hpzpplhn,hpzpplhn.dll"
CoreDriverSections="{D20EA372-DD35-4950-9ED8-A6335AFE79F0},UNIDRV.OEM,UNIDRV_DATA"
[HPP7200T.GPD.ICM_LH_PHASE5]
CopyFiles=HPC_COMMON_LH,HP_PRNPROC,@HPZ3RLHN.DLL,@HPZ3ALHN.DLL,@HPZSSLHN.DLL,@HPP7200T.GPD,@HPP7X00T.GPD,@HPZ3CLHN.INI,@HPZSMLHN.GPD,@HPZ3MLHN.GPD,@HPP7200T.XML,@HPZSCLHN.DTD,@HPFRES50.DLL,@HPFIME50.DLL,@HPFIGLHN.DLL,@HPZPRLHN.DLL,HP_LANGMON
DataFile=HPP7200T.GPD
LanguageMonitor="PCL hpz3llhn,hpz3llhn.dll"
PrintProcessor="hpzpplhn,hpzpplhn.dll"
CoreDriverSections="{D20EA372-DD35-4950-9ED8-A6335AFE79F0},UNIDRV.OEM,UNIDRV_DATA"
[MS_ABOUT_UI]
HPCABOUT.DLL
HPCSTR.DLL
[CIO_COPYFILES_SPOOL]
HPZIDR12.DLL,,,0x00000020
HPZINW12.DLL,,,0x00000020
HPZIPM12.DLL,,,0x00000020
HPZIPR12.DLL,,,0x00000020
HPZIPT12.DLL,,,0x00000020
HPZISN12.DLL,,,0x00000020
[CIO_COPYFILES_SYS32]
HPZIDR12.DLL,,,0x00000020
HPZINW12.DLL,,,0x00000020
HPZIPM12.DLL,,,0x00000020
HPZIPR12.DLL,,,0x00000020
HPZIPT12.DLL,,,0x00000020
HPZISN12.DLL,,,0x00000020
[MS_COLOR]
HPCCLJ1.DLL
HPCCLJUI.DLL
[DMC_x86]
HPCDMCLH.DLL,,,0x00000020
[GPD_COMMON3]
HPZSMLHN.GPD
[DUSTDEVIL_COPYFILES_SPOOL]
HPBMIAPI.DLL,,,0x00000020
HPBMINI.DLL,,,0x00000020
HPBOID.DLL,,,0x00000020
HPBOIDPS.DLL,,,0x00000020
HPBPRO.DLL,,,0x00000020
HPBPROPS.DLL,,,0x00000020
HPEACLHN.HPI,,,0x00000020
[DUSTDEVIL_COPYFILES_SYS32]
HPBMIAPI.DLL,,,0x00000020
HPBMINI.DLL,,,0x00000020
HPBOID.DLL,,,0x00000020
HPBOIDPS.DLL,,,0x00000020
HPBPRO.DLL,,,0x00000020
HPBPROPS.DLL,,,0x00000020
HPEACLHN.HPI,,,0x00000020
[HP_ICC]
HP DJ 6900-PREM PAPER(TRICOLOR+BLACK).ICC,hpf69000.icc,,0x00000020
HP DJ 6900-PREM PAPER(TRICOLOR+GRAY).ICC,hpf69002.icc,,0x00000020
HP DJ 6900-PREM PAPER(TRICOLOR+PHOTO).ICC,hpf69001.icc,,0x00000020
HP DJ 6900-PREM PLUS PHOTO(TRICOLOR+BLACK).ICC,hpf69003.icc,,0x00000020
HP DJ 6900-PREM PLUS PHOTO(TRICOLOR+GRAY).ICC,hpf69005.icc,,0x00000020
HP DJ 6900-PREM PLUS PHOTO(TRICOLOR+PHOTO).ICC,hpf69004.icc,,0x00000020
HP OJ 6300-PREM PAPER(TRICOLOR+BLACK).ICC,hpo63000.icc,,0x00000020
HP OJ 6300-PREM PAPER(TRICOLOR+PHOTO).ICC,hpo63001.icc,,0x00000020
HP OJ 6300-PREM PAPER(TRICOLOR+GRAY).ICC,hpo63002.icc,,0x00000020
HP OJ 6300- PREM PLUS PHOTO(TRICOLOR+BLACK).ICC,hpo63003.icc,,0x00000020
HP OJ 6300- PREM PLUS PHOTO(TRICOLOR+PHOTO).ICC,hpo63004.icc,,0x00000020
HP OJ 6300- PREM PLUS PHOTO(TRICOLOR+GRAY).ICC,hpo63005.icc,,0x00000020
[HP_LANGMON]
HPZ3LLHN.DLL
[HP_LIDIL_LANGMON]
HPZLLLHN.DLL
[HP_PRNPROC]
HPZPPLHN.DLL
[HPC_COMMON]
HPZEVLHN.DLL
HPZSTLHN.DLL
HPZUILHN.DLL
[HPC_COMMON_LH]
HPZEVLHN.DLL
HPZSTLHN.DLL
HPZUILHN.DLL
[HPCLJ5V2_COLOR]
HPCLJ5.ICM
[HPDJ500C_COLOR]
HP500ND.ICM
HP500NG.ICM
[HPPRPROC]
HPZPPLHN.DLL,,,0x00000020
[MANUAL_DUPLEX]
HPZEVLHN.DLL,,,0x00000020
[PSRENDER]
HPZSRLHN.DLL,,,0x00000020
[RENDER]
HPZ5RLHN.DLL,,,0x00000020
[RES_COMMON]
HPZSTLHN.DLL,,,0x00000020
[STRING_DLL]
HPZSTLHN.DLL,,,0x00000020
[UI]
HPZLSLHN.DLL,,,0x00000020
HPZSSLHN.DLL,,,0x00000020
HPZUILHN.DLL,,,0x00000020
[PML_user_Inst.AddService]
; PML Service configuration info
DisplayName = "Pml Driver HPZ12"
ServiceType = 0x00000020
StartType = 0x2
ErrorControl = 1
ServiceBinary = %11%\svchost.exe -k HPCIO
AddReg=PML_Addreg
[NET_user_Inst.AddService]
; NET Service configuration info
DisplayName = "NET Driver HPZ12"
ServiceType = 0x00000020
StartType = 0x2
ErrorControl = 1
ServiceBinary = %11%\svchost.exe -k HPCIO
AddReg=NET_Addreg
[PML_AddReg]
; Registry configuration info
HKLM,SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost,"HPCIO",0x00010008,"Pml Driver HPZ12"
HKLM,SYSTEM\CurrentControlSet\Services\Pml Driver HPZ12\Parameters,"ServiceDll",0x00020000,"%11%\HPZipm12.dll"
[Net_AddReg]
; Registry configuration info
HKLM,SOFTWARE\Microsoft\Windows NT\CurrentVersion\SvcHost,"HPCIO",0x00010008,"NET Driver HPZ12"
HKLM,SYSTEM\CurrentControlSet\Services\Net Driver HPZ12\Parameters,"ServiceDll",0x00020000,"%11%\HPZinw12.dll"
[DustDevilReg]
11,,HPBMIAPI.DLL,1,300
11,,HPBOID.DLL,1,300
11,,HPBOIDPS.DLL,1,300
11,,HPBPRO.DLL,1,300
11,,HPBPROPS.DLL,1,300
[DestinationDirs]
DefaultDestDir=66000
HP_PRNPROC=66001
HPPRPROC=66001
CIO_COPYFILES_SYS32=66002
DUSTDEVIL_COPYFILES_SYS32=66002
HP_LANGMON=66002
HP_LIDIL_LANGMON=66002
HP_ICC=66003
HPCLJ5V2_COLOR=66003
HPDJ500C_COLOR=66003
[SourceDisksFiles]
hpf69000.icc = 1
hpf69001.icc = 1
hpf69002.icc = 1
hpf69003.icc = 1
hpf69004.icc = 1
hpf69005.icc = 1
hpo63000.icc = 1
hpo63001.icc = 1
hpo63002.icc = 1
hpo63003.icc = 1
hpo63004.icc = 1
hpo63005.icc = 1
HP_3P522.PPD = 1
HP4M3_V1.PPD = 1
HP4M6_V1.PPD = 1
HP4ML_V1.PPD = 1
HP4MP3_1.PPD = 1
HP4MP6_1.PPD = 1
HP4MPLS.GPD = 1
HP4PLUS3.PPD = 1
HP4PLUS6.PPD = 1
HP4SI6_1.PPD = 1
HP500ND.ICM = 1
HP500NG.ICM = 1
HP5SI.GPD = 1
HP5SIM.GPD = 1
HPBMIAPI.DLL = 1
HPBMINI.DLL = 1
HPBOID.DLL = 1
HPBOIDPS.DLL = 1
HPBPRO.DLL = 1
HPBPROPS.DLL = 1
HPC1220P.PPD = 1
HPC1220P.XML = 1
HPC1RWSL.PPD = 1
HPC1RWSL.XML = 1
HPC1RXSL.PPD = 1
HPC1RXSL.XML = 1
HPC2GW6L.GPD = 1
HPC2GW6L.XML = 1
HPC3050F.GPD = 1
HPC3050F.XML = 1
HPC3052F.GPD = 1
HPC3052F.XML = 1
HPC3055F.GPD = 1
HPC3055F.XML = 1
HPC3346L.GPD = 1
HPC3346L.XML = 1
HPC3390F.GPD = 1
HPC3390F.XML = 1
HPC34I6L.GPD = 1
HPC34I6L.XML = 1
HPC35W6L.GPD = 1
HPC35W6L.XML = 1
HPC38O6L.GPD = 1
HPC38O6L.XML = 1
HPC3BG6L.GPD = 1
HPC3BG6L.XML = 1
HPC3H06L.GPD = 1
HPC3H06L.XML = 1
HPC3IE6L.GPD = 1
HPC3IE6L.XML = 1
HPC3JS6L.GPD = 1
HPC3JS6L.XML = 1
HPC3UW6L.GPD = 1
HPC3UW6L.XML = 1
HPC3XO6L.GPD = 1
HPC3XO6L.XML = 1
HPC48S6L.GPD = 1
HPC48S6L.XML = 1
HPC5200F.GPD = 1
HPC5201F.GPD = 1
HPC5200F.XML = 1
HPC5201F.XML = 1
HPC520XF.GPD = 1
HPC6686L.GPD = 1
HPC6686L.XML = 1
HPC6906L.GPD = 1
HPC6906L.XML = 1
HPC6AE6L.GPD = 1
HPC6AE6L.XML = 1
HPC6K4SL.PPD = 1
HPC6K4SL.XML = 1
HPC6LI5L.GPD = 1
HPC6LI5L.XML = 1
HPC6LISL.PPD = 1
HPC6LISL.XML = 1
HPC6Y06L.GPD = 1
HPC6Y06L.XML = 1
HPCABOUT.DLL = 1
HPCCLJ1.DLL = 1
HPCCLJ1.INI = 1
HPCCLJUI.DLL = 1
HPCDMCLH.DLL = 1
HPCFONT.DLL = 1
HPCLJ5.ICM = 1
HPCLJ5V2.PPD = 1
HPCSTR.DLL = 1
HPDJ340.GPD = 1
HPDJ340M.GPD = 1
HPDJ400.GPD = 1
HPDJ400M.GPD = 1
HPDJ420.GPD = 1
HPDJ500.GPD = 1
HPDJ500C.GPD = 1
HPDJ5550.CFG = 1
HPDJ600.GPD = 1
HPDJ600M.GPD = 1
HPDJ890C.GPD = 1
HPDJRES.DLL = 1
HPF0450T.GPD = 1
HPEACLHN.HPI = 1
HPF0450T.XML = 1
HPF3550T.GPD = 1
HPF3550T.XML = 1
HPF3650T.GPD = 1
HPF3650T.XML = 1
HPF3745T.GPD = 1
HPF3745T.XML = 1
HPF3840T.GPD = 1
HPF3840T.XML = 1
HPF3920T.GPD = 1
HPF3920T.XML = 1
HPF4A63L.GPD = 1
HPF4A63L.XML = 1
HPF4A6AL.GPD = 1
HPF4BK3L.GPD = 1
HPF4BK3L.XML = 1
HPF5400T.GPD = 1
HPF5400T.XML = 1
HPF5740T.GPD = 1
HPF5740T.XML = 1
HPF5940T.GPD = 1
HPF5940T.XML = 1
HPF6540T.GPD = 1
HPF6540T.XML = 1
HPF6840T.GPD = 1
HPF6840T.XML = 1
HPF6940T.GPD = 1
HPF6940T.XML = 1
HPF6980T.GPD = 1
HPF6980T.XML = 1
HPF880AL.DLL = 1
HPF900AL.DLL = 1
HPF940AL.DLL = 1
HPFDJ50.INI = 1
HPFDJ640.GPD = 1
HPFDJ69X.GPD = 1
HPFDJ6XX.GPD = 1
HPFDJ816.GPD = 1
HPFDJ830.GPD = 1
HPFDJ840.GPD = 1
HPFDJ845.GPD = 1
HPFDJ84X.GPD = 1
HPFDJ89X.GPD = 1
HPFDJ920.GPD = 1
HPFDJ930.GPD = 1
HPFDJ940.GPD = 1
HPFDJ948.GPD = 1
HPFDJ94X.GPD = 1
HPFDJ950.GPD = 1
HPFDJ955.GPD = 1
HPFDJ957.GPD = 1
HPFDJ95X.GPD = 1
HPFDJ96C.GPD = 1
HPFDJ970.GPD = 1
HPFDJ97E.GPD = 1
HPFDJ97I.GPD = 1
HPFDJ97X.GPD = 1
HPFDJ980.GPD = 1
HPFDJ98C.GPD = 1
HPFDJ990.GPD = 1
HPFDJ99E.GPD = 1
HPFDJ99X.GPD = 1
HPFH5900.EXP = 1
HPFIGLHN.DLL = 1
HPFIME50.DLL = 1
HPFIMG50.DLL = 1
HPFNAM50.GPD = 1
HPFRES50.DLL = 1
HPFUD50.DLL = 1
HPFUI50.DLL = 1
HPIII522.PPD = 1
HPIIP522.PPD = 1
HPIJ2280.CFG = 1
HPIJ3000.CFG = 1
HPLJ__31.PPD = 1
HPLJ_3P1.PPD = 1
HPLJ1100.GPD = 1
HPLJ2.GPD = 1
HPLJ21P6.GPD = 1
HPLJ2300.CFG = 1
HPLJ2P.GPD = 1
HPLJ2PP.GPD = 1
HPLJ2X.GPD = 1
HPLJ3.GPD = 1
HPLJ3P.GPD = 1
HPLJ4.GPD = 1
HPLJ4100.CFG = 1
HPLJ4200.CFG = 1
HPLJ4300.CFG = 1
HPLJ4550.CFG = 1
HPLJ4600.CFG = 1
HPLJ4L.GPD = 1
HPLJ4M.GPD = 1
HPLJ4ML.GPD = 1
HPLJ4MV.GPD = 1
HPLJ4MV1.PPD = 1
HPLJ4P.GPD = 1
HPLJ4PS.GPD = 1
HPLJ4SI.GPD = 1
HPLJ4V.GPD = 1
HPLJ5.GPD = 1
HPLJ5100.CFG = 1
HPLJ5500.CFG = 1
HPLJ5L.GPD = 1
HPLJ5M.GPD = 1
HPLJ5M_4.PPD = 1
HPLJ5MP.GPD = 1
HPLJ5N.GPD = 1
HPLJ5P.GPD = 1
HPLJ5P_1.PPD = 1
HPLJ5SI1.PPD = 1
HPLJ5SIM.PPD = 1
HPLJ6L.GPD = 1
HPLJ6MP.GPD = 1
HPLJ6P.GPD = 1
HPLJ6P_4.PPD = 1
HPLJ8150.CFG = 1
HPLJ8550.CFG = 1
HPLJ9000.CFG = 1
HPMCPB25.GPD = 1
HPMCPC25.GPD = 1
HPMCPC25.PPD = 1
HPMCPD25.CFG = 1
HPMCPD25.PPD = 1
HPMCPDP5.XML = 1
HPMCPDPS.XML = 1
HPMCPL25.GPD = 1
HPMCPM25.GPD = 1
HPMOJ50.INI = 1
HPMOJR40.GPD = 1
HPMOJR45.GPD = 1
HPMOJR4I.GPD = 1
HPMOJR60.GPD = 1
HPMOJR65.GPD = 1
HPMOJR80.GPD = 1
HPMOJR8I.GPD = 1
HPMOJRX.GPD = 1
HPMOPY.GPD = 1
HPMOPYUI.INI = 1
HPMPSC50.GPD = 1
HPO0410T.GPD = 1
HPO0410T.XML = 1
HPO1100T.GPD = 1
HPO1100T.XML = 1
HPO1200T.GPD = 1
HPO1200T.XML = 1
HPO1300T.GPD = 1
HPO1300T.XML = 1
HPO1310T.GPD = 1
HPO1310T.XML = 1
HPO13X0T.GPD = 1
HPO1400T.GPD = 1
HPO1400T.XML = 1
HPO1500T.GPD = 1
HPO1500T.XML = 1
HPO1600T.GPD = 1
HPO1600T.XML = 1
HPO1X00T.GPD = 1
HPO2100T.GPD = 1
HPO2100T.XML = 1
HPO2150T.GPD = 1
HPO2150T.XML = 1
HPO2170T.GPD = 1
HPO2170T.XML = 1
HPO2200T.GPD = 1
HPO2200T.XML = 1
HPO2300T.GPD = 1
HPO2300T.XML = 1
HPO2350T.GPD = 1
HPO2350T.XML = 1
HPO2400T.GPD = 1
HPO2400T.XML = 1
HPO2500T.GPD = 1
HPO2500T.XML = 1
HPO2600T.GPD = 1
HPO2600T.XML = 1
HPO2700T.GPD = 1
HPO2700T.XML = 1
HPO3100T.GPD = 1
HPO3100T.XML = 1
HPO3200T.GPD = 1
HPO3200T.XML = 1
HPO3300T.GPD = 1
HPO3300T.XML = 1
HPO3X00T.GPD = 1
HPO4100T.GPD = 1
HPO4100T.XML = 1
HPO4105T.GPD = 1
HPO4105T.XML = 1
HPO410XT.GPD = 1
HPO4200T.GPD = 1
HPO4200T.XML = 1
HPO4300T.GPD = 1
HPO4300T.XML = 1
HPO4PG3L.GPD = 1
HPO4PG3L.XML = 1
HPO5500T.GPD = 1
HPO5500T.XML = 1
HPO5600T.GPD = 1
HPO5600T.XML = 1
HPO5H83L.GPD = 1
HPO5H83L.XML = 1
HPO6200T.GPD = 1
HPO6200T.XML = 1
HPO6300T.GPD = 1
HPO6300T.XML = 1
HPO6X00T.GPD = 1
HPO7200T.GPD = 1
HPO7200T.XML = 1
HPO7300T.GPD = 1
HPO7300T.XML = 1
HPO7400T.GPD = 1
HPO7400T.XML = 1
HPO7X00T.GPD = 1
HPOEMUI.DLL = 1
HPOF300T.GPD = 1
HPOF300T.XML = 1
HPOGDS3L.GPD = 1
HPOGDS3L.XML = 1
HPOH3550.EXP = 1
HPOH5500.EXP = 1
HPOJ1600.CFG = 1
HPOJ2600.CFG = 1
HPOJ2700.CFG = 1
HPOJ6200.CFG = 1
HPOJ720.GPD = 1
HPOJ7200.CFG = 1
HPOJ7300.CFG = 1
HPOJ7400.CFG = 1
HPOJ750.GPD = 1
HPOJ750I.GPD = 1
HPOJ920.GPD = 1
HPOJ950.GPD = 1
HPOJG55.GPD = 1
HPOJG55I.GPD = 1
HPOJG85.GPD = 1
HPOJG85I.GPD = 1
HPOJG95.GPD = 1
HPOJK60.GPD = 1
HPOJK60I.GPD = 1
HPOJK80.GPD = 1
HPOJK80I.GPD = 1
HPOJV30.GPD = 1
HPOJV40.GPD = 1
HPOJV40I.GPD = 1
HPOJV45.GPD = 1
HPP0320T.GPD = 1
HPP0320T.XML = 1
HPP0330T.GPD = 1
HPP0330T.XML = 1
HPP0370T.GPD = 1
HPP0370T.XML = 1
HPP0380T.GPD = 1
HPP0380T.XML = 1
HPP03X0T.GPD = 1
HPP0420T.GPD = 1
HPP0420T.XML = 1
HPP0470T.GPD = 1
HPP0470T.XML = 1
HPP1160T.GPD = 1
HPP1160T.XML = 1
HPP2570T.GPD = 1
HPP2570T.XML = 1
HPP7200T.GPD = 1
HPP7200T.XML = 1
HPP7400T.GPD = 1
HPP7400T.XML = 1
HPP7800T.GPD = 1
HPP7800T.XML = 1
HPP78X0T.GPD = 1
HPP7X00T.GPD = 1
HPP8000T.GPD = 1
HPP8000T.XML = 1
HPP8100T.GPD = 1
HPP8100T.XML = 1
HPP8200T.GPD = 1
HPP8200T.XML = 1
HPP8400T.GPD = 1
HPP8400T.XML = 1
HPP8700T.GPD = 1
HPP8700T.XML = 1
HPP8X00T.GPD = 1
HPPH0330.EXP = 1
HPPH0380.EXP = 1
HPPH0420.EXP = 1
HPPH0470.EXP = 1
HPPH1500.EXP = 1
HPPH3100.EXP = 1
HPPH3200.EXP = 1
HPPH3300.EXP = 1
HPPH7800.EXP = 1
HPPH8000.EXP = 1
HPPH8100.EXP = 1
HPPH8200.EXP = 1
HPPH8400.EXP = 1
HPV600AL.DLL = 1
HPV700AL.DLL = 1
HPV800AL.DLL = 1
HPV820AL.DLL = 1
HPV880AL.DLL = 1
HPVDB720.DLL = 1
HPVDB820.DLL = 1
HPVDJ50.INI = 1
HPVDJ610.GPD = 1
HPVDJ612.GPD = 1
HPVDJ615.GPD = 1
HPVDJ660.GPD = 1
HPVDJ66E.GPD = 1
HPVDJ67X.GPD = 1
HPVDJ690.GPD = 1
HPVDJ691.GPD = 1
HPVDJ693.GPD = 1
HPVDJ694.GPD = 1
HPVDJ695.GPD = 1
HPVDJ697.GPD = 1
HPVDJ69X.GPD = 1
HPVDJ6XX.GPD = 1
HPVDJ710.GPD = 1
HPVDJ720.GPD = 1
HPVDJ7XX.GPD = 1
HPVDJ812.GPD = 1
HPVDJ815.GPD = 1
HPVDJ82E.GPD = 1
HPVDJ82I.GPD = 1
HPVDJ82X.GPD = 1
HPVDJ870.GPD = 1
HPVDJ87E.GPD = 1
HPVDJ87I.GPD = 1
HPVDJ87X.GPD = 1
HPVDJ882.GPD = 1
HPVDJ89E.GPD = 1
HPVDJ89I.GPD = 1
HPVDJ89X.GPD = 1
HPVIMG50.DLL = 1
HPVNAM50.GPD = 1
HPVSCP50.DLL = 1
HPVUD50.DLL = 1
HPVUI50.DLL = 1
HPW0460T.GPD = 1
HPW0460T.XML = 1
HPW1000T.GPD = 1
HPW1000T.XML = 1
HPW1200T.GPD = 1
HPW1200T.XML = 1
HPW1B83L.GPD = 1
HPW1B83L.XML = 1
HPW1QI3L.GPD = 1
HPW1QI3L.XML = 1
HPW1RC3L.GPD = 1
HPW1RC3L.XML = 1
HPW2BC6L.GPD = 1
HPW2BC6L.XML = 1
HPW9800T.GPD = 1
HPW9800T.XML = 1
HPWH0460.CFG = 1
HPWH9800.CFG = 1
HPWK550T.GPD = 1
HPWK550T.XML = 1
HPWK850T.GPD = 1
HPWK850T.XML = 1
HPWM50AL.DLL = 1
HPWM5100.GPD = 1
HPWM5112.GPD = 1
HPWM5122.GPD = 1
HPWM5125.GPD = 1
HPWM5225.GPD = 1
HPWM5350.GPD = 1
HPWM535M.GPD = 1
HPWM5CON.INI = 1
HPWM5DB1.DLL = 1
HPWMACRO.GPD = 1
HPZ3ALHN.DLL = 1
HPZ3CLHN.INI = 1
HPZ3LLHN.DLL = 1
HPZ3MLHN.GPD = 1
HPZ3RLHN.DLL = 1
HPZ5CLHN.INI = 1
HPZ5RLHN.DLL = 1
HPZ6CLHN.INI = 1
HPZ6MLHN.GPD = 1
HPZ6RLHN.DLL = 1
HPZEVLHN.DLL = 1
HPZFNLHN.NTF = 1
HPZIDR12.DLL = 1
HPZLALHN.DLL = 1
HPZINW12.DLL = 1
HPZIPM12.DLL = 1
HPZIPR12.DLL = 1
HPZIPT12.DLL = 1
HPZISN12.DLL = 1
HPZLELHN.DLL = 1
HPZLLLHN.DLL = 1
HPZLSLHN.DLL = 1
HPZPPLHN.DLL = 1
HPZPRLHN.DLL = 1
HPZSCLHN.DTD = 1
HPZSCLHN.INI = 1
HPZSMLHN.GPD = 1
HPZSRLHN.DLL = 1
HPZSSLHN.DLL = 1
HPZSTLHN.DLL = 1
HPZUILHN.DLL = 1
[PrinterPackageInstallation.amd64]
PackageAware=TRUE
CoreDriverDependencies={D20EA372-DD35-4950-9ED8-A6335AFE79F0},{D20EA372-DD35-4950-9ED8-A6335AFE79F1},{D20EA372-DD35-4950-9ED8-A6335AFE79F2},{D20EA372-DD35-4950-9ED8-A6335AFE79F3}
[Strings]
;Localizable
Disk1="Windows Installation Disc"
[SourceDisksNames.x86]
1 = %Disk1%,,,"I386"
[SourceDisksNames.amd64]
1 = %Disk1%,,,"Amd64"
[SourceDisksNames.ia64]
1 = %Disk1%,,,"Ia64"

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

Time machine backup error OS Status error 2

Time machine has been backing up to newly replaced Time Capsule with no Time Machine issues until today.
There have been a few Time Capsule 'amber flashing light' moments, solved with a reset.
But after one such reset this morning, despite the green light being steady, the error message stated in the title above has appeared.
Time capsule is visiblle and properly configured, according to Airport Utility.
On the menu bar, the Tme Machine logo is grey, and states "Time Machine is not configured".
In the Time Machine preferences window, have re set the Time Capsule as the backup disk (several times).
Time Capsule green light is on, and I can hear it whirring into action when I select it as back up disc.
The complete message reads:
Time Machine can’t access the backup disk “(my name) Time Capsule”. Time Machine backup OS status error 2.
I am Running OSX 10.6.7
Time Capsule 1 TB
Less than one month old, and the second time calsule replacement form Apple.
Can anyone please shed any light on this?
Many thanks
Lorraine

Is the NAS designed to work with Time Machine, because Time Machine isn't designed to work with a NAS.
See this post (Major Dude) that is in the More Like This section:
Time Machine and ReadyNAS Duo

Media encoder status error CS4

I cant get my CS4 projects to encode!
Media encoder gives me a status error. (yellow triangle in the status column) When I open the text file I get:
- Source File: C:\Users\Andrew\AppData\Local\Temp\denis final CS4_1.prproj
- Output File: E:\Sequence 01.wav
- Preset Used: Windows Waveform 48kHz 16-bit
- Video:
- Audio:
- Bitrate:
- Encoding Time: 649:51:33
8/25/2009 9:10:49 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Other info:
-Vista 64bit,
-Adobe creative Suite CS4. Premiere CS4 4.1.0
-It wont encode anything, I've tried a few projects, the above one was an export of audio timeline.
-The project "denis final CS4.prproj" is actually in my "E:" drive
-A renamed project called "denis final CS4_1.prproj" (created by CS4 I assume) does in fact exist in "C:\Users\Andrew\AppData\Local\Temp\"
-I am unable to deactivate Premiere CS4 . It allows me to deactivate successfully, but comes up active next time I run.
Any ideas?
thanks,
Andy

Here's what I get after a few minutes of being in the encoder. Nothing actually starts encoding:
- Source File: /Users/user/Library/Caches/TemporaryItems/Wedding.prproj
- Output File: /Users/user/Video/Projects/Wedding/DVD/_Wedding.mpg
- Preset Used: Export Widescreen DVD 7Mbps CBR
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:19
Sun Dec 20 15:56:11 2009 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Is there an error code in there?

Spool request Error

HI Experts,
MOst of the time Users encounter Spool Request Error while giving printouts. So for that Ihave to manualy delete sppol requests from SP01. Is there any where I can Schedule Programm where I set parameters to delete spool requests before reaching its maximum limit. Urgent.
Thanks.
Khan

Hi Khan,
Try this FM RSPO_R_RDELETE_SPOOLREQ.
Have a look in this post
How I set the auto delete old spool request
Regards,
Satish

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Spool status - error no authorization

Similar Messages

Maybe you are looking for