Spool - text not printing for 1st run

Hi Experts,
I am sending the Sap SCRIPT layouts from my print program to a spool request.
When i execute my print program directly (without going to debuggng mode), some part of the texts (headings.. etc) are NOT seen on the layout.
But when i run the print program via debugging mode and later turn the debug off then i am able to see the complete text on the layout from the spool.
Please tell me what more i should have to do have complete texts on my layout on the direct exec of my print prgram?
Thanks
Dany

Hi Pawan,
The code is huge and is enclosed in loops.any ways the sample is here
   call function 'OPEN_FORM'
        exporting
             application    = 'TX'
             archive_index = ' '
             archive_params = ' '
             device         = 'PRINTER'
             dialog         = ' '
             form           = space
             language       = sy-langu
             options        = zoption
        importing
             language       = sy-langu
        exceptions
             others         = 1.
zoption has :
zoption-tddest    = usr01-spld.
zoption-tdimmed   = 'X'.
zoption-tddelete = 'X'.
zoption-tdprogram = sy-cprog.
loop at itab.
call function 'START_FORM'
       exporting
            form      = w_form
            language = sy-langu
            startpage = 'FIRST'.
another loop contains the call to main windows
loop.
endloop.
call function 'END_FORM'
       importing
            result                   = zitcpp
       exceptions
            unopened                 = 1
            bad_pageformat_for_print = 2
            others                   = 3.
endoop
call function 'CLOSE_FORM'
       importing
            result                   = zitcpp
       exceptions
            unopened                 = 1
            bad_pageformat_for_print = 2
            send_error               = 3
            others                   = 4.
zitcpp has :
zitcpp-tddest    = usr01-spld.
zitcpp-tdimmed   = 'X'.
zitcpp-tddelete = 'X'.
zitcpp-tdprogram = sy-cprog.
zitcpp-tdnewid = ' '.
Can you please help me with this?

Similar Messages

Header text not printed for scheduling agreement

Hi All,
I have issue with header text print out for scheduling agreement (SA).
In SA when I am manually writing some note and then taking print out, system is giving me correct output with maual note.
I have one standard text (ST) which I need to be printed in evry SA, so in SPRO I created new head text for vendor and in copying rule for text for SA, I created linkage of SA header text with Vendor head text.
In vendor master, I inserted ST in newly created vendor header text.
So now when ever I create new SA for vendor system will determin header text from vendor master.
Now after creating SA when I check the SA, I am able to my ST in SA, but at the time of print out this ST in not printing.
Please let me know what could be the reson.
Regards,
Sameer

I dont understand about what you mean by expand.
When you a print PO, PO text (header or item) it will check to the configuration setting.
The system didnt care if its adopted from vendor master or info record, or whatever you make in the copying rule.
In your case : you create a standard text then it get copied into PO , then you set the standard text to the PO for print out, example the standard text : word is
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
Then in the PO the text appear will be like below(the same, because it get copied)
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
If you configure it in define text for SA, then it the print out it will also (the same)
"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
So what text need to expand?

Info record Po text not printing in Po

Hi all,
Info record po text not printing in po print out. Info record po text showing in po at item level but it was not printing in po. In info record No matl text checked. In material master no text maintained. please help on this
Thanks in advance for your help

Hi Mahesh,
Follow the path:
SPRO--> MM --> Purchasing --> Messages --> Texts for Messages ---> Define texts for Purchase Order
Double click on "Texts for Document Item" under Dialog Structure
Click on new entries and then Fill the following fields:
Pur. Doc. Category: Purchase Order
Print Operation: New
Doc. Type: NB
Item Category: Standard
Text Object: Purchasing Doc. Item texts (EKPO)
Text Id: Info Record PO Text (F02)
Print Sequence: 2
Print Priority: 1
and then Save
Hope this helps
Thanks,
Ankur

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Spool List not printing in Background

Hi,
When i try to execute the report in background in development system i can able to see the spool list, whereas when i try to execute the same report in testimg server(may be with more data) i can not see the spool list but the job is in finish status.
Please can i know the reason for the same.
Thanks & Regards,
Sudheer.

Hi!
This may be because you started the program with the option, not to create new spool request, or to delete the spool request immediately.
When you run your program in background, check the printer options also.
Regards
Tamá

Some text not printing when printing from FM8 to Pdf

We have recently upgraded to Acrobat 9 and now have problems with some Helvetica text not showing up in the pdfs. If we change the text to Arial it prints. Changing/substituting Arial for Helvetica is not an option since these files are structure using modules built by a 3rd party. This is obviously an issue with Framemaker8 and Acrobat 9 so my hopes are that someone else has had this issue and has a fix.

Thanks Art. Sorry, I looked through the forum and didn't see any Q&A on missing text in Pdfs. We are on Windows XP working files from our desktop and our server. Our normal method of producing pdfs is through File>Print using our minor customized pdf settings for screen viewing and hires printing (we've used these settings for years). Since our upgrade to Acrobat 9 we are now using Distiller 9.2.0.124. I've also found out since I first posted my question that we are not on the latest version of Framemaker8. I will run the updates to get us to the latest version of 8 and see if that fixes what seems to be an incompatiblity issue between FM8 and Acrobat 9. I say that because this problem started when we upgraded to Acrobat 9. If that doesn't fix the problem, I'll get back to you to find out more about the Microsoft printer Hotfix. Unless you know for a fact that FM8 is not compatible with Distiller 9.2.0.124, in that case we'll need to upgrade to FM9.

SAP SCRIPT: Header text not printing - Custom Purchase Order.

Hello Experts,
I have used the standard MEDRUCK and copied to ZMEDRUCK. I want the PO header text to print in my form.
I have used subroutine-pool and called it in the form.
Here is my subroutine
FORM fetch_table_data TABLES in_tab STRUCTURE itcsy
                             out_tab STRUCTURE itcsy.
TABLES EKKO.
DATA: BEGIN OF header OCCURS 0,
          ld_txt1(163),
          ld_txt2(163),
          ld_txt3(163),
        END OF header.
DATA: li_lines LIKE STANDARD TABLE OF tline WITH HEADER LINE,
        ID like THEAD-TDID,
        TNAME LIKE THEAD-TDNAME,
        TDOBJECT like THEAD-TDOBJECT.
DATA HTEXT LIKE EKKO-EBELN.
* HTEXT = EKKO-EBELN.
READ TABLE in_tab WITH KEY EKKO-EBELN.
if sy-subrc = 0.
TNAME = in_tab-value.
ENDIF.
TNAME = EKKO-EBELN.
*CONCATENATE EKPO-ebeln EKPO-ebelp INTO v_item_text.
*MOVE v_head_text to HNAME.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    id                            = 'F01'
    language                      = 'E'
    name                          = TNAME
    object                        = 'EKKO'
*   ARCHIVE_HANDLE                = 0
*   LOCAL_CAT                     = ' '
* IMPORTING
*   HEADER                        = TNAME
tables
    lines                         = li_lines
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
*   WRONG_ACCESS_TO_ARCHIVE       = 7
*   OTHERS                        = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR out_tab.
out_tab-VALUE = TNAME.
CONDENSE out_tab-VALUE.
MODIFY out_tab TRANSPORTING VALUE WHERE NAME = 'TNAME'.
ENDFORM.
And my script in the form is
PERFORM FETCH_TABLE_DATA IN PROGRAM ZMEDRUCK_SUBP2
USING &EKKO-EBELN&
CHANGING &TNAME&
ENDPERFORMpar RECEIVED FROM M/S     &TNAME&
The header text is still not flowing in my form.
What mistake i'm I doing here ?
How can I resolve this ?
Pls help !

Hi,
Data is li_lines internal table. 1st you have to read the text form the internal table line by sy-tabix.
At last you have to concatenate these variable into the out tab value.
you can use the following code
ORM fetch_table_data TABLES in_tab STRUCTURE itcsy
                             out_tab STRUCTURE itcsy.
TABLES EKKO.
DATA: BEGIN OF header OCCURS 0,
          ld_txt1(163),
          ld_txt2(163),
          ld_txt3(163),
        END OF header.
DATA: li_lines LIKE STANDARD TABLE OF tline WITH HEADER LINE,
        ID like THEAD-TDID,
        TNAME LIKE THEAD-TDNAME,
        TDOBJECT like THEAD-TDOBJECT.
DATA HTEXT LIKE EKKO-EBELN.
READ TABLE in_tab WITH KEY EKKO-EBELN.
if sy-subrc = 0.
TNAME = in_tab-value.
ENDIF.
ALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
    id                            = 'F01'
    language                      = 'E'
    name                          = TNAME
    object                        = 'EKKO'
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = li_lines
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
data : f_lines TYPE i,
DESCRIBE TABLE li_lines LINES f_lines.
data: lstr type String,
      lstr1 type string,
      lstr2 type string,
      lstr3 type string,
      lstr4 type string.
read table li_lines index 1.
lstr = li_lines
condense lstr.
clear li_lines
read table li_lines index 2.
lstr1 = li_lines
condense lstr.
clear li_lines
read table li_lines index 3.
lstr2 = li_lines
condense lstr.
clear li_lines
if f_lines GT 3.
ead table li_lines index 4.
lstr3 = li_lines
condense lstr.
clear li_lines
ead table li_lines index 5.
lstr4 = li_lines
condense lstr.
clear li_lines
endif.
data : v_text type text.
concatenate lstr1 lstr2 lstr3 lstr4 into v_text separate by ' '.
CLEAR out_tab.
READ TABLE out_tab WITH KEY name = 'TNAME'.
out_tab-value = v_text
MODIFY out_tab INDEX sy-tabix.
Regards
Nayan Kumar

Smartforms-Text not printing completely

Hi!
In my invoice printing one of the item columns which shows the text for the material description is getting trunctaed. Those ar elong texts but when we print it only 70 caharactrs appear and the rest gets cut and dosent show on the form . The text is stored in a variable g_kdmat whose associated type is TDLINE whose lenght is 132 but I dont understnd why only 70 characters appear in my invoice printing. Can anyone help me out with this please. Urgent please.
Thanks

My coding for extracting the text is as folows:
data: l_werks like vbrp-werks,
      l_hlmat type ZHLMAT,
      l_kunnr like vbak-kunnr,
     l_vbeln like vbrp-vbeln,
     l_posnr like vbrp-posnr,
      l_product_key type TDOBNAME,
      lt_lines type table of tline,
      ls_lines type tline.
Get kdmat, not exist then get material sales text, not exists then Material
description
**get from kdmat
fill g_hlmat
if gs_gen_del-uepos = '000000'.   "BOM Main
   g_hlmat = gs_gen_del-material.
   l_hlmat = ' '.
else.
   l_hlmat = g_hlmat.
endif.
get g_kdmat, g_kdmtx
select single werks into l_werks from vbrp
     where
     vbeln = gs_vbap-vbeln and
     posnr = gs_vbap-posnr.
get sold to
select single kunnr into l_kunnr from vbak where
    vbeln = gs_vbap-vbeln.
select kdmat kdmtx into (g_kdmat, g_kdmtx) from zcustmat
    where
    parvw = ' ' and
    kunnr = l_kunnr and    "sold to
    matnr = gs_gen_del-material and
    werks = l_werks and
    hlmat = l_hlmat.
endselect.
check sy-subrc <> 0.
get material sales text
concatenate gs_gen_del-bil_number gs_gen_del-itm_number into l_product_key.
call function 'READ_TEXT'
    exporting
      name = l_product_key
      object = 'VBBP'
      id = '0001'
      language = sy-langu
     tables
       lines = lt_lines
     exceptions
       not_found = 1
       ohters = 2.
if sy-subrc = 0.
    read table lt_lines into ls_lines index 1.
       move ls_lines-tdline to g_kdmat.
Remove sapscript special characters
       replace: '<(>' in g_kdmat with ' ',
                '<)>' in g_kdmat with ' '.
       exit.
endif.
get Material description
select single arktx into g_kdmat from vbrp where
     vbeln = gs_gen_del-bil_number and
     posnr = gs_gen_del-itm_number.
   vbeln = gs_vbap-vbeln and
   posnr = gs_vbap-posnr.
if sy-subrc <> 0.
g_kdmat = 'No Product service !!!!!'.
endif.
I fail to understand why the entire text is not coming , when the window size is ok and text has place to flow into subsequent lines. Is it something to do with the associated type in global data or somet8ing else.
Thanks

PO Item Text Not Printing correctly

Hello,
Per the config settings, the PR Item Text is transferred to the PO Item text while creation of a PO.
When the PO is created, one can see the PO Item Text maintained in ME23N, but when you do the print
preview / print output, it is not displayed.
Few observations I would like to point out:-
1) Tables STXH and STXL are maintained correctly for PR.
2) Tables STXH and STXL are not maintained when the PO is created.
3) If you do the changes in PO Item text through ME22N for say Line Item 0010 and save, then print preview / print output shows only for Item 0010 since the entries are not present in STXH and STXL.
4) In T-code ME23N, when you go to PO Item Text tab for Line item 0010, then interestingly PO Print Preview shows only for 0010 even though there are no table entries. If you drill down for all line items, the print preview shows for all.
Can anyone please suggest why the print preview / print output does not show for all line items and why SAP is behaving this way?
Is there any other config settings to be done?
Regards,
Sanjiv

Hi Sanjeev,
Can you tell me what did u do for the item text to appear on the foem. Am having the same issue. Did u do any cnahes in teh form / driver program?....Pls let me know.
What was the customisation that was affecting it.
I am using the same
SAPFM06P ENTRY_NEU ZMEDRUCK(standard program).
Did u do any changes in the form? I want the item text to appear below the item no.
Please let me know.
Thanks
Micky

Smartform - text not printed bold

Hey guys, hope anyone can shed some light on this.
We have invoices with a smartstyle attached, using font Verdana.
Some texts are marked as bold in the smartforms.
Now, my problem:
When printing from any environment (DEV, PRD) using one of the printers configured in SAP, text marked as bold is not printed in bold.
When printing the same invoice using LOCL, and sending it to the exact same printer from windows, text marked as bold is printed in bold.
So I guess it's not the form, it's not the style, it's not even the printer: just the printer settings in SAP.
In many ways, it is very similar to the issue addressed in this thread:
[Printer Setting|Printer Setting] , except that when previewing the text doesn't show as bold.
My question is two-fold:
- How likely is it that this issue is related to the printer configuration (and thus, basis config)?
- If yes to the above, how do I verify this? I need something solid, since the SAP basis guys aren't very cooperative and keep pointing out that it's either the smartform or the smartstyle - without researching themselves
Thanks in advance.

Hi,
I think its the issue of the basis people,they need to make the settings. We had a similar problem here,we had to change the printer settings in SPAD,affter the basis peole had made the settings for us, for taking printout in hindi.
Thanks.

IPhoto 6.0.6 text not printed on cards and book

I bought via iPhoto cards and entered texts. The text was not printed when I received it. A few days later ordered a hardcopy book : same problem.
All texts are missing except the text on the cover of the book. What can it be ?
Message was edited by: mardge

Mardge
Welcome to the Apple user discussion forums
Report the problem to Apple - they will refund your cost and may have a solution
US page - you probably should search for the returns page for Belgium - http://www.apple.com/support/photoservices/returns/
Did you preview the book and the card before sending - http://support.apple.com/kb/HT1040 ?
Doe the preview show the text?
Is there anything unusual about the text that did not print?
LN

Importing standard SAPScript text - not asking for transport request!

Hi!
I tried to import some standard SAPScript text running program RSTXSCRP.
Everything was fine, but I was not asked for package and for a transport request... is it ok?
How can I send this standard text to Quality system?
Will reward,
Mindaugas

You can use program : RSTXTRAN
Navigation -> goto SE38 -> enter RSTXTRAN -> execute ->
Name of correction -
text key -object - TEXT
text key- name - enter standard text name
Text id - ST
Text key language - EN
execute now -> select text here -> enter -> now click on push button trsfr texts to corr -> you will get pop up window( request)
Thanks
Seshu

File spooling but not printing - InD CS3

I am at a loss as to why InD CS3 (and Acrobat and Reader) will not print to a shared printer. Illustrator CS3 and Photoshop CS3 will print to this shared printer. Why not InD CS3? This has been ongoing since CS3 came out.
The file spools, all images and fonts are downloaded but the file never appears in the print queue. Not on the originating machine or the sharing machine. It just vanishes.
CS3 Pro versions Loaded on Mac G5 dual 2gig (non-intel) running Tiger. Three other machines have the same issue. All various machine configs (G4 single/Tiger, G5 dual 1.8/Tiger, and an Intel iMac/Leopard).
- Printer is shared through a networked G3 running Jaguar (yeah, yeah, working on it).
- The printer is an Epson SP1400
- All drivers updated on all machines.
- All CS3 patches done.
- Permissions done.
- OnyX system maintenance done.
- Preferences trashed. Machines restarted (printer and macs).
- The InD CS3 file can be printed from CS3 to a networked Panasonic postscript printer. So it's not the file.
- The InD file can be saved down using Interchange to CS2 and that will print to the shared printer.
- The InD CS3 file will print to this printer if the printer is connected directly to the machine it is printing from.
Apple and Epson have pointed out that because other CS3 apps do print to the printer, there is something going on with InD, Acrobat and Reader and the sharing function. Is it the G3 and Jag? Or something to do with CUPS or .local or a sharing protocol? Please help me out with this.

Anything interesting in the logs on the printing machine or the sharing machine?
In the Print button in the Adobe Print dialog, click the popup to Error Handling and tell it to cough up an error page if it fails to print. Maybe the printer will give you feedback about why it's failing then.
If that does nothing, then what if you print the file to postscript and drop the PS file onto the printer icon in the Dock? That would at least guarantee you were getting a file and let you experiment with why it isn't making it all the way through the process.
A final thought is to raster it completely [make a Transparency Flattener set to 100% raster @ whatever DPI] and see if just a bitmap will print correctly. That tells you if it's something weird with the postscript at least.
It's all guesses, really. But at least it might give you something new to play with... Best of luck!

Logo not printing for Zebra printer

Hi All,
I have a requirement to print company logo after executing MIGO using Zebra printer. I have added the Zebra print parameters in SAPscript and uploaded the ITF file of logo to SO10 and from there copied to my SAPscript and tried printing, there is no logo displayed. I have tried using including standard text in sapcript with help of INCLUDE text statement that also is not working. Please help me to print logo using SAPscript for zebra printers.
Thanks & Regards,
Priya

Hi All,
If I directly printing the uploaded ITF file from standard text, I am able to print the logo. But when copy paste the same code in SAPscript its not printing. Please can anybody explain why?
Thanks & Regards,
Priya

MS Word text not printing on my HP Printer.

I installed MS Word 7 and I cannot get it to print text. Everything is hook up correctly and the printer will print the screen. I have checked everything, any suggestion?

Hi @Barbiegirl17 and welcome to the HP Forums!
I'm sorry to hear you've had issues printing black with your Photosmart 6510 printer, but I will absolutely do my best to lend a helping hand
I will suggest that you try the steps within this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document first. If that doesn't resolve the issue can you please let me know whether it's in or out of warranty and what country you reside in? Thanks!
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Spool - text not printing for 1st run

Similar Messages

Maybe you are looking for