Sporadic power failure to my 4 week old imac 2ghz intel core 2 duo

sorry i am a noob, i have recently been having a problem with my mac just turning itself off. i happens out of the blue when i am only running menial tasks such as watching videos or browsing the internet. its not a problem with it restarting it just plain turns off as if someone has pulled the plug. if anyone has any suggestions or is experiencing the same thing please help.
thank you in advance.
jambon

Welcome to Discussions, but yoyu should post to the intel forum http://discussions.apple.com/forum.jspa?forumID=1110 where you will get an informed answer,
Miriam

Similar Messages

  • I have a 5 year old MBP, 2GHz Intel Core Duo, 1GB MHz, DDR2 SDRAM, running Snow Leopard, 10.6.8.

    I have a 5 year old MBP, 2GHz Intel Core Duo, 1GB MHz, DDR2 SDRAM, running Snow Leopard, 10.6.8.
    I use wireless to connect to the Internet and everything works fine when I sign on.  After being on line for awhile and my remaining battery power at about 60%, I lose connectivity.  I turn off Airport, restart it, and I am asked for my secure password.  I enter the password but cannot reconnect.  So, I shut down the computer for 5 to 10 minutes, restart, and everything works great again.
    Has anyone experienced this behavior and do you have any suggestions as to what is causing the problem.
    Thanks for any help you can give me.
    Lowell

    I think I hit the wrong key ... so here it is again!
    Thank you ...  I keep seeing this i5 and i7 processor mentioned and it is also recommeded that I stream using it. Do you have any suggestions on which MacBook would serve me better? Or is there an upgrade of any kind that will help me?
    Thanks again.
    D

  • My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected  an external HD that had been on the desktop (i.e. I forgot to eject it  properly), started displaying video anomalies (lines); testing  (TechTool Deluxe 3.1.3) indicates the video is f

    My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
    an external HD that had been on the desktop (i.e. I forgot to eject it
    properly), started displaying video anomalies (lines); testing
    (TechTool Deluxe 3.1.3) indicates the video is failing.
    The graphics card is an ATI Radeon X1600. Is this reasonably
    replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
    PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
    same unit?
    My soldering skills are, sadly, poor.
    And it only dawned on me a couple days ago that because this iMac does
    not have a Core 2 Duo processor, it will not be able to enter the
    "Lion" generation.
    Thanks,
    Patrick
    PS Are manuals for this model available? I have a copy of the Peachpit
    Apple Training Series "Desktop and Portable Systems, Second Edition"
    but it only goes up to the G5 20" iMac. There doesn't appear to be a
    3rd or later edition in the series.

    My 5 yr old 2 GHz Intel Core Duo 20" iMac, right after I disconnected
    an external HD that had been on the desktop (i.e. I forgot to eject it
    properly), started displaying video anomalies (lines); testing
    (TechTool Deluxe 3.1.3) indicates the video is failing.
    The graphics card is an ATI Radeon X1600. Is this reasonably
    replaceable? If so, is the "MPC ClientPro 434 All In One ATI MXM X1600
    PCIe 128MB Video Card" I found on eBay (for $25, used) essentially the
    same unit?
    My soldering skills are, sadly, poor.
    And it only dawned on me a couple days ago that because this iMac does
    not have a Core 2 Duo processor, it will not be able to enter the
    "Lion" generation.
    Thanks,
    Patrick
    PS Are manuals for this model available? I have a copy of the Peachpit
    Apple Training Series "Desktop and Portable Systems, Second Edition"
    but it only goes up to the G5 20" iMac. There doesn't appear to be a
    3rd or later edition in the series.

  • Will Mountain Lion work on my 4 year old iMac with Intel Core 2 Duo   Processor Speed:     2.66 GHz

    Will Mountain Lion work on my 4 year old iMac with Intel Core 2 Duo processor and a 2.66 gHz.
    Really do not want to load it and find there are issues.
    Oh I really not a big tech guy I just want everything to work well.
    And I'm just about to purchase a Mac Book Pro as well.
    Any thoughts and comments would be appreciated
    Cheers

    I also have a 4 year old iMac 24". it is the 3.06 GHz Core 2 Duo. I have been running Mountain Lion since it was released, and before that Lion. Runs great. Over the last month I have noticed some slow data transfers from a USB harddrive. But not enough to do any research. I use a USB harddrive for my Time Machine backup and notice no problems or slow transfers while the Time Machine backup runs. My iTunes has its nedia files on a USB harddrive and is used to watch videos, play music and share photos on the AppleTV. I also use Aperture on the iMac to store and manage 20,000 photos.
    I have 6 GB of ram, 4GB and 2GB memory sticks. I know it is best to have identical ram sticks but my iMac model cannot run 8GB of ram and I feel 6GB is better than 4GB.
    Mountain Lion is a great OS and I am glad I upgraded. It works great with the AppleTV (no airplay but iTunes on the iMac serves up all our music, photos and videos), iPhone, and iPod Touch. Also with my wifes brand new Macbook Pro. All the devices including the iMac can share data on iCloud.

  • 2ghz intel core duo macbook pro 15 power adapter

    What is the model number for the correct power adapter for this laptop?
    Which models will work? There are 60w and 85w.

    The 85 W model is for 15" MBPs. Either of the two listed on Apple's Online Store will work.

  • Heartbroken, my 3 week old imac 21.5 i3 has just died!! Help anyone

    Tonight whilst working in Logic 8 my 3 week old imac i3 21.5 just powered off instantly. Not a proper shut down, just like someone flicked of the power supply. Now there is no life at all. I have swapped power cables and and plug sockets, tried the holding in the power button reset. There is no indication of any power from the imac. Totaly dead. Any suggections before I call Apple on Monday morning?

    First thing to do, is plug it in, and then move the system to the edge of the desk/table/whatever. Tilt it up as far as you can. Then look in the little grille on the bottom, and see if you can find any green lights. I believe on the 21" model they should be on the right side, but check both sides. They can be a little difficult to find, even if you know what you're looking for. They're usually pretty close to the little cover for the RAM slots, and sometimes you have to look at just the right angle because of the nature of the holes in the grille.
    If you see one light, that means that the PSU is almost certainly good. You're getting "trickle" power. Now, while still looking at that green light, press the power button, and see if you see a second light turn on. If not, then you're not getting communication between the PSU and logic board, and it's PROBABLY the logic board that went out, though these issues can be difficult to pin down. Sometimes everything points to the PSU but it's really the logic board, other times it's the other way around.
    Either way, you're better off taking it somewhere than calling, unless you call just to set up an appointment somewhere. Since the SMC reset didn't do it, it's a hardware failure and they're going to have to swap something out.
    The good news, however, is that the data on your drive is almost certainly still there, and when you get the system back you'll be able to pick up right where you left off.

  • IChat can't find built in iSight on 1 week old iMac

    The iChat video preference pane on this 1 week old iMac, reads "This computer does not support video chat".
    It can find the built in iSight in other software (Photo Booth, iMovie, Skype), but not in iChat.
    It worked perfectly 5 days ago.
    The only thing that's changed is that I updated my software using "Software Update".
    Can any one help me get iChat video to work? Please help.
    Brett

    Hi,
    The Bandwidth Limit drop down should not be greyed out.
    I can think of two possibilities.
    1) Parental Controls is On for this Mac User Account (but I have never heard of this effecting the Bandwidth Limit).
    2) iChat is unable to or has Misread the Internet speed you have.
    In the Connection Doctor (Video Menu) what does it say about the Network Status and Capabilities about Internet Speed ?
    I would delete com.apple.ichat.plist
    This file in in Your Home Folder/Library/Preferences.
    Restart iChat afterwards to re-write the .plist
    It will also get iChat to check for the camera And the Internet Speed.
    Unfortunately deleting this .plist means you may have to reset an Preferences in iChat that you have changed from Default.
    7:09 PM Monday; February 8, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Isight saying not connected on 2 week old Imac

    2 week old imac displaying "camera not connected" whilst green light constantly on, went through all apple support checklists, resetting with no luck,
    HELP !!

    Try troubleshooting the Built-in iSight > How to Troubleshoot iSight
    Then if your iSight is still misbehaving:
    1. run the Apple Hardware Test > Intel-based Macs: Using Apple Hardware Test
    2. seek support at > Apple - Support - iMac - Service FAQ

  • Using new battery on old 2.16 GHz Intel Core Duo

    I am in a remote location, under a deadling.  My 2.16 GHz Intel Core Duo MacBook Pro battery cable finally went south.  I'm in a studio with half a dozen brand new battery units ... for 2.66 GHz Intel Core i7 MacBook Pro's.
    Can I use the battery from a 2.66 GHz Intel Core i7 MacBook Pro on my older 2.16 GHz Intel Core Duo???
    All ears,
    Ben

    As I wrote above, there is no possibility of using one of the new batteries in your old machine: it absolutely won't fit. Furthermore, removing the battery from one of the new machines will void the warranty on that machine, so even if you could contrive a wiring harness to connect one of the new batteries externally to your MBP, there would be good reason not to do it.
    And if you did, there is no way to predict how the charging system in your machine would respond to the incorrect battery. Would it be charged at all? Would it be charged only to the capacity of the battery specified for use in your computer, which is far lower than the capacity of the new battery? Would the SMC in your machine recognize the battery and distribute the power from it correctly? The answers to these and many other related questions are anybody's guess.
    So the solution to your immediate problem will be to move your work onto one of the newer computers, finish it up by the deadline, and order a new battery for your own computer.

  • How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

    How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

    Try calling 1-800-676-2775.  Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk).  *May* is only because they may not burn disks for Leopard anymore.
    If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
    Have you considered Snow Leopard?.  Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

  • Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system.  Aircard will not stop self-assigning IP address.  Any ideas how to resolve successfully?

    Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had.  After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8.  I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
    Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure.  Only way to my home network and router is ethernet now.  Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
    Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

    When see the beachball cursor, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Have MacBook Pro (ancient) has 2.16 Ghz Intel Core Duo with 1 GB 667 MHz RAM using OS 10.4.11. Can I upgrade OS? If so, how far? And can I add more memory? I realize this is an old laptop but I need to wait to upgrade to new.

    Have MacBook Pro (ancient) has
    2.16 Ghz Intel Core Duo with
    1 GB 667 MHz RAM
    using OS 10.4.11.
    Can I upgrade OS? If so, how far?
    And can I add more memory?
    I realize this is an old laptop but I need to wait to upgrade to new.

    if it is the core duo, mac OS X 10.6.8., max ram 2gb.

  • Any discounts for trading in a old macbook intel core Duo

    I was just wondering is there any trade in discount for a old white 13 inch macbook with a intel core duo processor. If there is a discount can it go towards a new computer?

    Click here for information, or sell it to a third party.
    (59517)

  • Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

    I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
    Anyone had the same problem, and if yes what is the solusion?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Can I upgrade to lion when i have a 2 GHz Intel core duo processor ( my computer is 6 years Old)  I have snow leopard now.

    Can I Upgrade my computer to Lion.  I have a 2 GHz Intel Core Duo Processor.  My computer is 6 years old.  Right now I have Snow Leopard.

    I have an old iMac about that age that I upgraded to Lion to test my 3rd party applications for compatibility. It upgraded quite simply. Please backup or save all your info/etc to an external CD/DVD/Hard drive, then try to run the installer. The Lion installer will analize your Mac for compatibility before it does anything, and will alert you to it's decisision. My 17" iMac is also 2 GHZ Intel core duo. Surprisingly for many of the things I use it for it works as good as my multi thousand dollar MacPro workstation. Best of luck. But Lion isn't compatible with many third party applications and drivers for printers; scanners; etc.

Maybe you are looking for

  • I'm trying to install a new OCZ ssd into my Macbookpro in a data doubler.

    Hello, I've got a late 2011 17 inch macbook pro running mountain lion.  I recently purchased an OCZ 480 g 6gb solid state drive hoping to make up for some of the lag I've been getting in the drive.  To do this I purchased the drive (Sata 3) and attem

  • Problem with WSDL file generated by PI for sender SOAP

    I have a scenario SOAP to idoc that I am trying to test in PI7.1.  I have created my objects in the ESR and completed the configuration in IB.  When I test the configuration in IB, the data passes through PI to ECC correctly. Now I want to export the

  • Parallel printer to iMac or Time Capsule

    We just traded in an old PC for a new iMac running Lion.  We still have an old HP laserjet 4L that has been a trouble free workhorse, and would like to keep it if possible.  It only has one output, a standard parallel printer cable.  Is there a way t

  • Scheduling agreement with Subcontracted material

    Hello Gurus, There is scheduling agreement with subcontracted material. While maintaining the schdule with ME38  , I want to make the warning message of "Please create components"   ME114 as error message.  I went into configuration and set this mess

  • Photos in Monitor Pixelated and Offset

    All - see screen shot below. Don't know why the photos in monitor are pixelated and offset (echeloned to right by bands). The same ones in slideshow viewer are fine.  The problem is, when I preview, I get the bad shots.  Need help!  Thanks... Bruce