Sports Tracker - where's the map ?

Hi !
     Is the map supposed to appear in Sports Tracker ?  In one of the views, I can see that the application is trying to map out my route but there background is blank.
     Is this a problem with my phone ?  If this is as design, what is the purpose of this view as there is no map to reference my position.
Thanks.

Hi fogster74
Presumably you have already accessed this settings page as shown in screenshot and changed to "Phone and Network"? 
Happy to have helped forum in a small way with a Support Ratio = 37.0
Attachments:
SportsTracker.jpg ‏71 KB

Similar Messages

  • A way to track where all the Sub Var are applied?

    Hopefully this is the section where to post.
    Is there a way of tracking where all the substitution variables are being used in the reports?
    Either in reports or calc scripts, or in a 3rd format, if there is one.
    We just don't want to open up each script individually and scan for use of the sub var, or open each report and see if it's used.

    Hi there,
    Is this HFM or Essbase?
    Regards,
    Thanos

  • HT4061 I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.

    I lost my IPhone5 and after 7 hours I called lost and stollen and now I can't track where was the last location I left the phone ,and I don't remember if I stablished the FIND MY PHONE app.
    Is there any way that I can find the last location that I left it,eventhough I called in lost and stolen and reactivated my # to a different device.

    If you didn't set up Find My iPhone or it otherwise does not appear in icloud.com, then there's no way to trace it. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance). 
    Regards.

  • Where are the maps on my 8120 pearl?

    Hi Guys,
    Apparently, phones that support 4.2 or above have the maps application.  My phone is 4.3 so should have the Blackberry maps already downloaded.  I have gone into 'Advanced Options' and maps is there - but where do I find the application to be able to use it??

    (In the  future, it would be a good idea to post your own thread, rather than jumping on the tail of another old one).
    I know a couple of people who use the BT dongle for GPS, with no problems.
    When you are certain the BT GPS device is connected to the BB, do this:
    Make certain that you in an area of good signal coverage AND outside with a clear view of the sky in an open area of no tall buildings.
    Click Options > Advanced > GPS > Menu > Refresh GPS.
    Give it up to 10 minutes to refresh, and try 2-3 times in a row.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Where is the maps view in photos in ios7

    Ipafter the update to ios7 i am missing in photos the view of the map.
    Before you could selcet the map and then start to find all photos from that location.
    I don't like the new view. I will not upgrade my other ios devices to ios7 until this is fixed.

    I have this issue too. I use iTunes for Windows to sync folders of photos (containing EXIF data) to my iPhone. On iOS 6, the map view was available in the photos app, but in iOS 7 it has disappeared.

  • Where is the Map?

    I'm reading the news about how Apple is using OpenStreetMap instead of Google in iPhoto for iOS.  I have an iPhone 4 and an iPad 2 and can not find the map view I see people discussing.  In fact, I found somewhere that when you select [i] info for an image, you should see the Info, Comments and Maps in the pop up but I don't have Maps.  I can go to Places in the Photos app and see that I have many photos that are geotagged but this does not work when using iPhoto.
    * Nevermind, I figured it out.  In the settings in iPhoto you have to turn on Location Lookup.  I thought I'd still post this in case anyone else had this problem.

    There is no upgrade - Photos is a new and totally different application - it does not have a map view and currently does not have any ability to add or modify locations - iPhoto still exists as it was before
    Tell Apple what you want
    In the meantime you have the option of continuing to use iPhoto (or Aperture) as before - they still work fine and will continue to until come OS upgrade breaks  them - maybe with enough customer input Apple will even agree  to continue to support them - worth a try
    LN

  • Oracle Audit SMF records (z/OS) / where are the mapping macros for SMAAUD?

    hi all,
    i'm searching unsuccessfully for the mapping macros describing the SMAAUD field content of the Oracle Audit SMF Records.
    does anybody have experience with analyzing the Oracle Audit SMF records?
    best regards
    stephen

    Art,
    The external tables are tricky because if you make one trivial mistake when describing the records (such as a wrong field length or type), the end result will be that the query against the FT will return no errors, but there will be zero or some weard number of records returned. I suggest to check again the record description and to try to select from the external table (after it is deployed) from SQL plus.
    Also, when configuring the flat file in OWB you can define the log file that will trace FT creation errors during deployment and a Bad file name that will direct the database to write records not fitting into the FT definition to the location specified in 'Bad file name'.
    These configuration parameters can be of help when struggling with the issues mentioned above.
    Regards:
    Igor

  • Where is the map in a calendar's meeting?

    Hi,
    after installing OSX Mavericks I tried to insert a address to a meeting. But the map – as shown in Craig Federighi's demo – is not appearing.
    Is there a special format for addresses? Is it only for the US market (I am in Germany and have German language activated)?
    Thanks for a hint.
    CK

    Swipe Home page to the right and search for Maps
    http://i1224.photobucket.com/albums/ee374/Diavonex/1b09005d7a370df0e6d125d1a2d0d 919.jpg

  • Where is the map of the whole world showing ALL my geotagged photos in the new Photos app?

    After "upgrading" from iPhoto to Photos, I cannot call up the world map to locate where I took pictures. Is this feature gone?
    It used to be if you clicked on "places" in the iPhoto sidebar you got this map. All the photos in one's library were represented by red pins. Since I organize my photos by location more than anything else feature such as date, this is a critical feature for me. Is it gone or has it been buried somewhere else in the program. (And no, clicking on the location data in each of the "events" is not sufficient because it only shows the photos in that event.)
    Also, how do you geotag data after you have taken a photo if it was geotagged in contemporaneously?

    There is no upgrade - Photos is a new and totally different application - it does not have a map view and currently does not have any ability to add or modify locations - iPhoto still exists as it was before
    Tell Apple what you want
    In the meantime you have the option of continuing to use iPhoto (or Aperture) as before - they still work fine and will continue to until come OS upgrade breaks  them - maybe with enough customer input Apple will even agree  to continue to support them - worth a try
    LN

  • Where is the map in iPad 2

    Where is map in iPad 2

    Swipe Home page to the right and search for Maps
    http://i1224.photobucket.com/albums/ee374/Diavonex/1b09005d7a370df0e6d125d1a2d0d 919.jpg

  • Where does the map recovered come from and its empty?

    I have all of the sudden a map with over a 100 recovered pictures but I dont miss any pictures in my other folders. Still i dont want to delete it, but all the pictures are empty?
    Also when i want to add a pictures to my facebook, i photo quits unexpectedly, this happens all the time, i restarted the computer but nothing helps, what to do? Even the moment when i clich in the lef pane on facebook i photo quits unexpectedly, what is going wrong?

    Oeps yes sorry I do mean folder.
    the problem with facebook is covered i deleted the whole folder with pictured and then uploaded them again, but still would like to know what went wrong and how i can prevent it.
    the other problem is still there i ahve a folder with recovered fotos but the photos are all empty? since i have many photos i dont know if im missing these and thus if i can delete them.

  • How exact is the N9 distance with Sports Tracker o...

    Hello guys,
    I use Sports Tracker and sometimes eCoach for recording and managing sport activities but it seems , that the distance is not very exact. The N9 shows sometimes 4,5  up to 5,1 km for the same track.
    Another example: if I start Sports Tracker without moving the N9, it shows a distance of 800m in 20 minutes. On the same place, gpsmeefo shows that 8 satelittes are in use.
    thanks mart
    Solved!
    Go to Solution.

    I've just done a brief 11 minute test with N95, N8 and N9 on the roof terrace: - N95: 30 m - N8: 20 m - N9: 10 m When I then took the devices into a room with poorer satellite availability, the distance counter shoots rapidly higher and higher (applies to all devices). If you do your exercises in a densely built area with a lot of buildings arround or in the forest or park with lot of trees, then it's likely to be a greater deviation in the measurement. But you may ask directly Sports Tracker developer about that...

  • New Sports Tracker (from Sports Tracker Technologi...

    Hi, 
    I have used this App for years now and just upgraded a few weeks ago to the new 3.01(0) (S60 5.0) from Sports Tracker Technologies for the N97 Mini. 
    I have noticed a major problem with the new application which pretty much drains my N97 battery within a couple of hours from full charge, and if you like to cycle for more than 2 hours this is a real pain in the neck. 
    I have tested every other app, on standby, the old Nokia beta version and no problem with the battery (I even bought a new battery!). I reported the problem to the new company in Mid July (twice) and have still to even get an acknowledgement that they received my email. 
    I also reported a more minor issue at the same time where by all screens do not show up in the selected unit of measure (e.g. if you select miles/imperial as the default) the month summary screen still shows Kms...
    Have to say... a disappointing start with a major flaw and no response from the company.... 
    (Former) Fan in Ireland :-(

    Hi
    Nice nickname. I presume you are from Galway.
    Firstly, the Sports Tracker application is no longer a Nokia application. It has been taken over by a 3rd party developer and as such, it is no longer supported by Nokia themselves.
    I regularly use it for hill walking and am aware of the battery situation when using it. There are a couple of things you can do to increase battery life. The first is to set the Access Point to ask when needed and you need to say "No" when asked. The second is to set the Workout Backlight to Automatic.

  • I can't seem to make a working profile to connect to office 365 on a windows 7 pc with only the mapi cdo runtime version 6.5.8320.0 installed using mfcmapi nor programmatically

    Hi,
    I have been struggling with this for a few days now.
    i have pc where no outlook is installed, where i installed the MAPI CDO Runtime may update (version 6.5.8320.0). i checked in the registry that the default mail provider was set to exchangemapi (HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail) .. it is.
    I downloaded the lastest version of mfcmapi, which i believe was the version of december 2013
    but i can't seem to create a profile for office 365 in it. I followed http://blogs.msdn.com/b/dvespa/archive/2013/05/21/how-to-mfcmapi-create-mapi-profile-exchange-2013.aspx and then i changed the properties to what was proposed here http://blogs.msdn.com/b/dvespa/archive/2013/07/15/create-profile-connect-mfcmapi-to-office-365.aspx
    That did not work, i keep getting an error one ore more properties are invalid when i try to use that created profile to connect to office 365 (from within mfcmapi).
    I also changed some of those proposed values to what autodiscover was telling me like setting PR_PROFILE_RPC_AUTH_PACKAGE to RPC_C_AUTHN_ANONYMOUS which should be the value $8000F001 instead of RPC_C_AUTH_NONE (at least i think so)
    I builded a simple program to encrypt my password using CryptProtectData and entered the value using mfcmapi in PR_PROFILE_AUTH_PASSWORD as was suggested in the last page.
    but nothing seems to work, i keep getting wrong configured errors and i'm totally clueless atm. This is supposed to work right on a pc where outlook is not installed ?
    I also tried this on another pc where outlook 2010 is installed and i am able to create the profile there and connect without a problem given that i enter the logon credentials once and let them be remember (they get stored / cached in the windows key store,
    like when using CREDWRITE function) from then on i can connect without a problem.
    also when calling configuremsgservice on the EMS service i created for a new profile in mfcmapi and let the UI show i can see on the pc where outlook is installed in the UI options to enter proxy information however when i do the same thing on the pc
    where only the mapi cdo runtime is installed i do not see any UI option to configure the proxy server information ... is this normal ?
    Hopefully someone can shed some light on what i'm doing wrong or might be wrong.
    Thanks in advance
    Willems Davy

    The window would open and I would get the hourglass cursor suggesting something was happening, but the Apple home page (default from the install) would not load, nor would any other page I tried (google, yahoo, cnn).
    Even though it's about a different application, I'd try the following document with that:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    (Safari uses the same webkit engine to render web pages as iTunes uses to render the Store pages. So an issue that can cause the iTunes Store to blank can also cause a Safari for Windows application on the same PC to produce blank pages.)

  • Where are the user mappings stored?

    Hi All,
    I have a small doubt. In Enterprise portal when we map a system to a user, where is the mapping between the EP user and the system  user stored in the server system?
    Thanks,
    Malita

    Hi Malita,
    PLease have a look at below link
    http://help.sap.com/saphelp_nw04/helpdata/en/fe/d22a41b108f523e10000000a155106/frameset.htm.
    thanks,
    krishna kattu.

Maybe you are looking for

  • Add-On in installed SAP ECC 6.0 SR3

    Hi All, I have installed ECC 6.0 SR3 with ABAP+JAVA (MI usage type) on Window 2K3 64bit R2. Now i want to add DI add-on in installed SAP system. How can i add this add-on in SAP system. regards, majamil

  • Calling sqlplus in shell script

    hi all, Can any one explain me why we use sqlplus -s command along with -s option in shell scripts only.

  • Dynamic Menu does not appear completely in RF Scanner Screen

    Hi, Problem is with the display of the dynamic menu on the scanner, Currently in R/3 4.6B system the whole SAP dynamic menu is visible on the scanner , however in ECC6.0 the dynamic menu does not fit on the scanner display entirely. Any ideas why thi

  • Jrockit multicast bug on RHEL4, WLS cluster does not works!

    OS and Kernel Version: Linux achilles1 2.6.9-34.0.1.ELsmp #1 SMP Wed May 17 16:59:36 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux We use Bea Weblogic 8.1SP5 with Jrockit JVM 1.4.2 on RHEL3. We upgraded to operating system to RHEL4, and found that the inte

  • How do I change a columns type?

    Hi, My boss figured I didn't have enough to do today. She asked me to cange all of the SSN column in the database from NUMBER to VARCHAR2(9). I would use alter table command right? Also why would my boss what me to do such a thing? She says that she