Spot from the hands on the housing of macbook pro

Working behind the macbook pro laptop of 2012 of 13 inches, I found after a while traces from hands where they settle down for the press! It isn't erased by anything. such feeling as corroded paint! what ways of the solution of this problem are? ? ?

None.  The aluminum is anodized and those spots will be permanent.  Some peoples body chemistry is such that it promotes discoloration of the MBP housing.  Gloves or wrist bands are the only  ways of minimizing this phenomenon.
Ciao.

Similar Messages

  • How to remove keys from the keyboard on macbook pro 2011

    I wonder how i remove the keys on macbook pro 2011 model?

    Hi x,
    Here are some links. None of them show your exact model, but keys have been the same/very similar for some time now. You may even want to google and check youtube to see if newer guides are available. If it's just a few keys, the "genius" bar at an Apple Store would probably help you with it.

  • How to share personal files from the  iMac to MacBook Pro

    How do I share files from the iMac so I don't have to keep on sending it to the MacBook Pro. Under the iMac's system preferences, I clicked on sharing and enabled personal file sharing. When I connect to the iMac's server using the MacBook Pro, I try to log in but it says my log in info is unknown. So I try loging in as a guest but when I click on the drop box, it says that I don't have the privilegde to view it. Is there another easier way of file sharing between the computers I have at home?

    When you log into the server computer you need to use the username and password of an account that exists on the server computer.

  • Large spot in the middle of Macbook Pro display.  What's wrong?

    I have a Late 2008 Macbook Pro that has been working great.  After transporting it in my bag one day, I took the computer out, started it up and noticed there was a large spot in the center of the screen that looked as if the glass and screen were stuck together or like a water spot behind the screen.  There was no liquid in my bag though! 
    The spot has about a 2 inch diameter and is directly in front of the Apple on the back of the computer.  All the pixels appear to work fine, it is just a cirlce about 2 inches big that is clearly noticable. 
    Any suggestions? 

    Hardware issues cannot be diagnosed by us volunteers.
    Best to make an appointment with Genius Bar and ask about repair estimate.  Be warned any repair will be replacemnt of the entire top shell, which will not be cheap.
    You may end up just wanting to live with it and start saving for a new system.

  • How do I fix that spot from the Forehead?

    Hello Everyone,
    How do I fix that White Color spot from the Forehead?
    (white_patch_RedStroke.jpg)
    (white_patch.jpg)
    I know "Clone Stamp" tool. But alas, it's looking fuzzy and disorder...
    (white_patch_CloneStampTool.jpg)
    Please suggest...
    Thanks!

    Hello Everyone and Paulo,
    I am pasting the Discussion between Paulo and Myself for your reference and benefits:
    Paulo Skylar: You have a pretty poor image to work with. However, you can try the following approach
    Creative1977: It was clicked from a Cell Phone's low resolution camera.
    Paulo Skylar: Do a rough selection with the lasso tool around the white spot and pre set a feather to the selection in the options bar.
    Creative1977: What should be the pre set of a feather? Perhaps 10 px?
    Paulo Skylar: Yes something like 10 or less pixels should be fine. This is not critical, but it there to make the edges of the selection blend in.
    * Jump the selection to a separate layer (Ctrl +J)
    Paulo Skylar: Add a solid color fill adjustment layer and clip it to the selection layer you just created. Use a color near the outside edge of the selection area.
    Creative1977: Could you please explain again in a different and more easier way?
    Paulo Skylar: After making your selection layer click on the eye dropper tool and with it click in an area near the selection you made to pick up that color. Then go to the layers panel and at the bottom click the black& white circle. Choose "solid color" from the resulting list. Click OK when the color picker dialog box appears.
    Paulo Skylar: In the layers panel move your cursor to the line between the image layer and the selection layer, hold down the Alt key and click. This will clip the color layer to the selection, that is limit the color correction applied to the full image to the region defined by the selection.
    Paulo Skylar: Change the blend mode to Darken
    Paulo Skylar: Adjust the opacity to match. You may then want to adjust the color and readjust the opacity for a better match

  • How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

    How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

    Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

  • I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?

    Did you follow the instructions on the page linked below?
    OS X Yosemite: Recover your entire system

  • What is the best way to transfer my music and pictures from my old PC to my new Macbook Pro?

    What is the best way to transfer my music and pictures from my old PC to my new Macbook Pro?

    This may help;
    http://www.apple.com/support/macbasics/migration/
    Ciao.

  • I got a MacBook Pro for the first time and just install iTunes.... how to I get my purchased songs from my Windows 7 to my new MacBook Pro

    I got a MacBook Pro for the first time and just install iTunes.... how to I get my purchased songs from my Windows 7 to my new MacBook Pro..... please try to make it easier for me since im new to the Mac OS

    1) Copy all music files to a thumb drive / external hard drive.
    2) Open iTunes on your MacBook Pro (congrats!)
    3) Under the File Menu, select "Add to Library."  Navigate to the folder with your music in it and click "Open."  Bam!  Music.

  • I have iPhone 6,  8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as  reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank

    I have iPhone 6,  8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as  reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.

    See iPhone BT profile on what can be connected/paired:
    iOS: Supported Bluetooth profiles - Apple Support
    And BT troubleshooting:
    iOS: Troubleshooting Bluetooth connections - Apple Support

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • Mail transfer from the old macbook to the newer retina macbook pro

    Hey, My father moved from an old macbook to the new retina macbook pro about 2 months back. Now as he is a business man he requires all his emails from his old mac onto the new macbook. The problem is to integrate his old mail data with 2 months of his current mail data.
    All the instructions i have yet found online only seem to be for a new macbook where all the mail data and preferences could be transfered.
    Thanks in advance,
    Cheers

    Hey, My father moved from an old macbook to the new retina macbook pro about 2 months back. Now as he is a business man he requires all his emails from his old mac onto the new macbook. The problem is to integrate his old mail data with 2 months of his current mail data.
    All the instructions i have yet found online only seem to be for a new macbook where all the mail data and preferences could be transfered.
    Thanks in advance,
    Cheers

  • I have the new retina MacBook Pro.  I made an iMovie but there's no idvd.  How do I make a dvd from my iMovie?

    I have the new retina MacBook Pro.  I made an iMovie but there's no idvd.  How do I make a dvd from my iMovie?

    Apple no longer sells iDvd.  You will have to purchase an older version of iLife that has iDvd on it or use a third party application such as Toast from Roxio.
    Ciao.

  • Cant open doc files from the server on MacBook Air after upgrading to Maverick

    Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

    Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
    I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
    I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
    I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

  • Can you capture video from the internet, using premiere pro cc?

    trying to capture video from the internet, using premiere pro cc, is that possible?
    also - it keeps saying "video capture offline" - any solutions for that?

    I am going to go out on a limb and say that while it may be against the YouTube terms of service to download or scrape a video off of their service, there are times that I really don't care since it is for my personal use. Providing myself or my wife with entertainment that she can watch or listen to on her smartphone while on an airplane, or in a car traveling down the road, just doesn't bother my moral compass. Doesn't make it twitch in the least.
    Perhaps I am wrong. Perhaps I shouldn't do it. Tough. I do, and will continue to do so until the Google police come knocking on my door.
    This is pretty much the same argument that they tried to kill the VCR with. The simple act of time shifting was something that was considered wrong, and illegal, until people came to their senses.
    As for the editing capability, you might be surprised at the ways it is possible to download video that works just fine for what I use it for. Premiere Pro has no problems allowing me to edit out the parts I don't like, or just aren't funny, and the quality really doesn't suffer much at all.
    Now, with the exception of something I did for my two year old Great Niece, I have never used any video that I have downloaded for anything except a tutorial, or in her case, a Sesame Street song I used when I shot video of me reading her the Sesame Street book that I purchased.
    Would it be wrong to post downloaded video, intact or edited, for public consumption? Sure it would. No question about it.
    But please do not assume that everyone downloading video from the Internet is doing so for nefarious purposes, and I promise not to assume everyone is a perfect angel and is following all the rules.

Maybe you are looking for

  • Column "split" in cross tab

    <p>Hello,</p><p> Is it possible to split a column into several (at least 2 sub-columns; analogy with rows)? The work-around to use rows and subrows for the data does solve the problem.</p><p>Any suggestions?</p>

  • Who's Who customizing in ESS

    Hi, We are using portal 6.0 SP17, with ECC 5.0 and the Web Dynpro based ESS applications. 1) Is it possible to customize the fields that are displayed in the standard application, without Java coding ? If not, can someone give me a hint of how to do

  • ADF BC and direct database call from ActionListener Method

    Hi I have an ADF BC application which generates a simple form . In the submit button I am calling a Java method which makes a direct database connection. The application hangs when the method does the executeUpdate() method public void onSubmit(Actio

  • Self Training in SQL Server

    Hi All, Is there a way to train myself in the SQL server?. If yes, can anyone please tell me what to do. Regards, Harish

  • Trade promotion management docs required

    Hello Gurus, Could any one send me Trade promotion management docs . Could you please define what is it. Thanks and regards, Divya