Spotify closes when undocking laptop

For some reason, when I physically eject my laptop from its docking station (like, if I want to move my laptop from my desk to another location) Spotify closes itself. It doesn't seem to matter if I have my music playing or not, although I generally have it paused at that point the vast majority of the time. I can restart Spotify just fine afterwards. I am using Windows 7 Professional, and I have a Dell-brand laptop and docking station.
Has this happened to anyone else? If so, did you figure out a way to keep it from happening? It's not a huge deal by any means, but it is a little weird.

I haven't ever received an official response, and it still does it for me occasionally (not every single time, though) regardless of which Spotify version I have, since I generally update when prompted. Like others have said, it also defaults to some pretty old tracks when I reopen it... like, something that I had listened to the week prior, which can be a pain sometimes. One thing that seems to maybe help a little is if I do not pause my music when undocking my laptop. I work in a pretty casual office, though, and I listen to very calm (and quiet!) music, so this is definitely not a solution for everyone.

Similar Messages

Windows Aero Theme Disabled When Undocking Laptop

Hi everyone,
My problem is quite simple (at least to explain). I am using a X230 bought in August 2012 with the Ultrabase docking station and a Philipps external display (not sure about the exact reference, but I don't think it's relevant anyway) connected to the docking station via VGA. All in all, the computer has everything needed to run high quality graphics.
When my laptop is docked, everything works perfectly fine with regards to display: desktop is extended over the two screens, Windows Aero features work fine, etc.
When I undock my laptop, the aero mode is automatically disabled (even when I am plugged in and not running on battery), and the left side of my screen has no "edge" (i.e. behaves just like the extended desktop, as if the external display, which is usually on the left, were connected and running).
Concerning the Aero problem, I ran the Aero troubleshooter, which returned two issues to be solved:
1. Color depth is too low. I checked this, and it's set on 32 bit TrueColor already, so this should not be an issue
2. Desktop Windows Manager is disabled. Once again, this feature seems to be running (I went to Services->Desktop Window Manager and it seems to be OK).
I have tried several solutions found on the internet/microsoft forums, but none worked. I am pretty sure that this problem appeared after a Windows update (a massive one, as I have disabled automatic update).Oh, and the Intel Graphics and Media Control Panel doesn't show up either. It shows up in the taskbar when I open it, but I don't get any dialog box/program on my screen.
Regarding the "fake" extended desktop... well apart from checking that there is only one display detected when I'm undocked, I don't really know what to look for. This is less of a problem though, as I can easily live with it.
Many thanks,
Matthieu

I may have come up with a new lead on this issue. I found this thread on the Apple forum:
https://discussions.apple.com/thread/4580006?start=0&tstart=0
I have exactly the same problem with Quicktime and it may be worth trying to uninstall/reinstall the graphics driver. I really don't want to screw things up though.
How should I proceed? Should I use the "uninstall driver" in the control panel? What will happen next: black screen, poor resolution? After I'm done, is this the correct driver I should reinstall?
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029033
M.

Outlook 2010 sticks on "Trying to Connect" when undock Laptops and VPN Connects Automatically

When our users undock their laptops the VPN kicks in automatically. All of the other network services just continue seamlessly. Outlook, however, sticks at "trying to connect". This is often accompanied by a password prompt.
This is easily solved by closing Outlook and reopening it (no need to enter password).
It doesn't seem unreasonable that outlook should require a restart after being disconnected like this. Just want to establish whether there is a way to have Outlook just re-connect without the need to close it and reopen it. Or is the need to
restart it unavoidable?
Thanks.

When our users undock their laptops the VPN kicks in automatically. All of the other network services just continue seamlessly. Outlook, however, sticks at "trying to connect". This is often accompanied by a password prompt.
This is easily solved by closing Outlook and reopening it (no need to enter password).
It doesn't seem unreasonable that outlook should require a restart after being disconnected like this. Just want to establish whether there is a way to have Outlook just re-connect without the need to close it and reopen it. Or is the need to
restart it unavoidable?
Thanks.
This is really a question for the Outlook forum, but from what I have seen over the years, thats just the way it is with OUtlook and MAPI or Outlook Anywhere. When you change the network, Outlook struggles..
Having said that, MAPI over HTTP with Exchange 2013 SP1 is working to eliminate those issues:
http://technet.microsoft.com/en-us/library/dn635177(v=exchg.150).aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

My itunes music stops playing when my laptop screen closes down after about 5 min. im using windows7

my itunes music stops playing when my laptop screen closes off after about 5minutes. im using windows7

DriveReadySeekComplete errors are either:
- IDE controler failure
- Bad cables
- Bad harddisk
Out of these 3, the last one sounds the most reasonable with nowadays harddrives. And yes, your system will hang when all your important processes are hanging while trying to do disk I/O.
What windows does is switching back to PIO mode and never report anything, until you hit the nice BSOD telling you to replace the floppydisk in drive C...

[SOLVED] how to prevent suspending/sleeping when closing laptop lid

Hi all,
My laptop, a Lenovo Thinkpad T430u, suspends whenever I close the lid. It's been doing this since I first installed Arch. I want to turn this feature off. How can I do it?
Relevant information:
acpid is installed
the configuration file /etc/acpi/handler.sh
#!/bin/bash
# Default acpi script that takes an entry for all actions
case "$1" in
button/power)
case "$2" in
PBTN|PWRF)
logger 'PowerButton pressed'
logger "ACPI action undefined: $2"
esac
button/sleep)
case "$2" in
SLPB|SBTN)
logger 'SleepButton pressed'
logger "ACPI action undefined: $2"
esac
ac_adapter)
case "$2" in
AC|ACAD|ADP0)
case "$4" in
00000000)
logger 'AC unpluged'
00000001)
logger 'AC pluged'
esac
logger "ACPI action undefined: $2"
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000)
logger 'Battery online'
00000001)
logger 'Battery offline'
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
case "$3" in
close)
logger 'LID closed'
open)
logger 'LID opened'
logger "ACPI action undefined: $3"
esac
case $(cat /proc/acpi/button/lid/LID0/state | awk '{print $2}') in
closed) XAUTHORITY=$(ps -C xinit -f --no-header | sed -n 's/.*-auth //; s/ -[^ ].*//; p') xset -display :0 dpms force off ;;
open) XAUTHORITY=$(ps -C xinit -f --no-header | sed -n 's/.*-auth //; s/ -[^ ].*//; p') xset -display :0 dpms force on ;;
esac
logger "ACPI group/action undefined: $1 / $2"
esac
# vim:set ts=4 sw=4 ft=sh et:
dmesg output:
[ 1530.790532] PM: Syncing filesystems ... done.
[ 1530.805678] PM: Preparing system for mem sleep
[ 1530.844445] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 1530.856658] Freezing remaining freezable tasks ... (elapsed 0.10 seconds) done.
[ 1530.963435] PM: Entering mem sleep
[ 1530.963572] Suspending console(s) (use no_console_suspend to debug)
[ 1531.123543] iwlwifi 0000:03:00.0: iwl_pcie_cmdq_reclaim: Read index for DMA queue txq id (9), index 207 is out of range [0-256] 208 208.
[ 1531.124216] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1531.124579] sd 0:0:0:0: [sda] Stopping disk
[ 1531.360682] mei 0000:00:16.0: suspend
[ 1531.440517] ahci 0000:00:1f.2: power state changed by ACPI to D3hot
[ 1531.687309] PM: suspend of devices complete after 722.490 msecs
[ 1531.687784] PM: late suspend of devices complete after 0.469 msecs
[ 1531.688232] pcieport 0000:00:1c.3: System wakeup enabled by ACPI
[ 1531.714222] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1531.727619] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1531.754015] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1531.767422] PM: noirq suspend of devices complete after 79.565 msecs
[ 1531.768301] ACPI: Preparing to enter system sleep state S3
[ 1531.797647] PM: Saving platform NVS memory
[ 1531.799282] Disabling non-boot CPUs ...
[ 1531.900721] smpboot: CPU 1 is now offline
[ 1532.004162] smpboot: CPU 2 is now offline
[ 1532.107554] smpboot: CPU 3 is now offline
I have pmutils and tlpinstalled
tlp config
# tlp - Parameters for power save
# Hint: some features are disabled by default, remove the leading # to enable them
# Set to 0 to disable/1 to enable TLP
TLP_ENABLE=1
# Seconds laptop mode has to to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
# Select a cpu frequency scaling governor: ondemand/powersave/performance/conservative
# Important:
# - You *must* disable your distribution's governor settings or conflicts will occur
# - ondemand is sufficient for *almost all* workloads, you should know what you're doing!
#CPU_SCALING_GOVERNOR_ON_AC=ondemand
#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your cpu. For available frequencies see
# tlp-stat output, Section "+++ Processor".
# Hint: Parameters are disabled by default, remove the leading # to enable them,
# otherwise kernel default values are used.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0
# Set the cpu "turbo boost" feature: 0=disable / 1=allow
# Requires an Intel Core i processor and kernel 3.7 or later.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Minimize number of used cpu cores/hyper-threads under light load conditions
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog
# 0=disable (default, saves power) / 1=enable (for kernel debugging only)
NMI_WATCHDOG=0
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
# Freq:voltage pairs are written to /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"
# Hard disk devices, separate multiple devices with spaces (default: sda).
# Devices can be specified by disk id too (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"
# Hard disk advanced power management level: 1(max saving)..254(off)
# Levels 1..127 may spin down the disk.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
# Hard disk spin down timeout:
# 0: spin down disabled
# 1..240: timeouts from 5s to 20min (in units of 5s)
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# (see 'man hdparm' for details)
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select io scheduler for the disk devices: noop/deadline/cfq (Default: cfq)
# Separate values for multiple devices with spaces.
#DISK_IOSCHED="cfq cfq"
# SATA aggressive link power management (ALPM):
# min_power/medium_power/max_performance
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
# PCI Express Active State Power Management (PCIe ASPM):
# default/performance/powersave
# Hint: needs kernel boot option pcie_aspm=force on some machines
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
# Radeon graphics clock speed (profile method): low/mid/high/auto/default
# auto = mid on BAT, high on AC; default = use hardware defaults
# (Kernel >= 2.6.35 only, not with fglrx driver!)
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
# WiFi power saving mode: 1=disable/5=enable
# (Linux 2.6.32 and later, some adapters only!)
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
# Disable wake on lan: Y/N
WOL_DISABLE=Y
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables / >=1 enables power save.
SOUND_POWER_SAVE=1
# Disable controller too (HDA only): Y/N
SOUND_POWER_SAVE_CONTROLLER=Y
# Set to 1 to power off optical drive in UltraBay (ThinkPads only)
# when running on battery. A value of 0 disables this Feature (Default).
# Drive can be powered on again by releasing (and reinserting) the
# eject lever or by pressing the disc eject button on newer models.
# Note: an UltraBay hard disk is never powered off.
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0)
BAY_DEVICE="sr0"
# Runtime Power Management for pci(e) bus devices
# (Kernel >= 2.6.35 only): on=disable/auto=enable
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
# Runtime PM for *all* pci(e) bus devices: 0=disable / 1=enable
# Warning: experimental option, could cause system instabilities
RUNTIME_PM_ALL=0
# Set to 0 to disable/1 to enable usb autosuspend feature
USB_AUTOSUSPEND=1
# Devices from the following list are excluded from usb autosuspend
# (separate with spaces). Use lsusb to get the id's.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"
# Set to 1 to disable autosuspend before shutdown/0 to do nothing
# (workaround for usb devices that cause shutdown problems)
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
# Restore radio device state (bluetooth, wifi, wwan) from previous shutdown
# on system startup: 0=disable/1=enable
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
RESTORE_DEVICE_STATE_ON_STARTUP=0
# Radio devices to disable on startup: bluetooth wifi wwan
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
# Radio devices to enable on startup: bluetooth wifi wwan
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth wifi wwan
# (workaround for devices that are blocking shutdown)
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
# Radio devices to enable on shutdown: bluetooth wifi wwan
# (to prevent other operating systems from missing radios)
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
# Radio devices to enable when wireless radio switch is turned on:
# bluetooth wifi wwan (Ubuntu + ThinkPad only)
#DEVICES_TO_ENABLE_ON_RADIOSW="wifi wwan"
# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module required)
# Charging starts when the remaining capacity falls below the START_CHARGE_TRESH
# value and stops when exceeding the STOP_CHARGE_TRESH value.
# Main battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay or slice battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80
# Set to 1 to disable use of tpacpi-bat on Sandy Bridge or newer Thinkpads
# and force usage of tp-smapi instead
#DISABLE_TPACPIBAT=1
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth/wifi/wwan
# Hint: parameters are disabled by default, remove the leading # to enable them
# Radio devices to disable on connect
DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
# Radio devices to enable on disconnect
DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
# Radio devices to enable/disable when docked
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""
# Radio devices to enable/disable when undocked
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""
thanks guys
I love arch
Last edited by beitme (2013-06-08 10:05:37)

@ Karol, done
@ 65kid, here's my logind.conf
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#Controllers=
#ResetControllers=cpu
#InhibitDelayMaxSec=5
#HandlePowerKey=poweroff
#HandleSuspendKey=suspend
#HandleHibernateKey=hibernate
#HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min

LevelUp closes when I add a Hue/Saturation layer (CS6) in Mission 2.

LevelUp closes when I add a Hue/Saturation layer (CS6) in Mission 2. When I reopen the LevelUp window, it restarts the mission. How can I correct this problem?
Thank you.

Hi Laura,
Please pull the panel out of the dock. If you click on the tab where the name is located and drag, you should be able to undock the panel. Here is a bit more about docking and undocking panels in the workspace: http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-750ca.h tml#WS8599BC5C-3E44-406c-9288-C3B3BBEB5E88.
Mira

My macbook shut off and wont turn back on. Im pretty sure it is charging. The LED light is on but only when the laptop is closed. Im in grad school and have lots saved. Please Help!

My macbook shut off and wont turn back on. Im pretty sure it is charging. The LED light is on but only when the laptop is closed. Im in grad school and have lots saved. Please Help!

ronicr76,
First it would be helpful if you post the exact model, year and OS version you have.
> The LED light is on but only when the laptop is closed<
So that light is the sleep indicator and tells us that the laptop is going to sleep when you close the lid. That would be normal behavior so the machine is still working. Possibly you're experiencing a backlight failure. With the machine supposedly "on" use a flashlight to carefully examine the screen. Do you see the desktop? Yes? machine is still running and something is wrong with the backlight.
You should immediately backup your computer or at the very least pull vital files off. With the computer hooked to another Mac (The way this is done depends on the exact MacBook, E.g.FireWire 800 to FireWire 800.) Then you restart the computer and hold the "t" key down. This puts your MacBook into "target mode":
How to use and troubleshoot FireWire target disk mode
Once your files are off try an SMC reset:
Intel-based Macs: Resetting the System Management Controller (SMC)
Are you able to get the backlight back on by opening and closing the display? Yes? Broken backlight cable refer to qualified service place. Even if it doesn't come on and you can still see the desktop with a flashlight it is still probably the backlight. Could be the a backlight problem also.

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

VI front panel won't close when it's done executing, when this vi was called by reference.

I've created a simple vi set to demonstrate the issue I'm having. I'm dynamically launching sub vi's from a main application. Simply put the main application is my test exec and the subvi's I'm calling dynamically are different tests. In the example I'm posting here the test vi is called Electrical Test 1.vi. I've configured this Electrical Test 1.vi to show front panel when called and close afterwards if originally closed. Problem is it won't close the front.
Other things to keep in mind
I want to be able to launch the test vi and not wait till it's done.
I'm using LabVIEW 2012 SP1.
Solved!
Go to Solution.
Attachments:
vi_launcher - v5.zip ‏73 KB

Basically the close after call only matters if the VI is called as a subVI (just like if you open a VI yourself and run it, it doesn't close when it is done). The two ways around this are to either have your top lvl app close the VI when it is done, this is explained here:
http://digital.ni.com/public.nsf/allkb/987B2026B41BD39786256CF800032E8C
or to have your VI close itself when it is done. Use a This VI reference and the Front Panel:Close invoke node.
Hope this helps.

I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I have had to uninstall itunes so that I could load this version, the PC says it is correctly loaded, but I now cannot open itunes. Advice?

I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I had to uninstall itunes so that I could load this version as the update to version 11 kept failing. The PC says 11.1.1.11 is correctly loaded, but I now cannot open itunes. Any advice on how to get itunes working again?

Hello there, ytnoj.
Uninstalling and reinstalling iTunes can be a tricky endeavor and must be done in a very specific way. The following Knowledge Base article provides the step-by-step of the process:
Removing and Reinstalling iTunes and other software components for Windows XP
https://support.apple.com/kb/HT1925
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My mail will not open or close when aim done using it? Is there any update i need to do to make this work properly??

If some can help me?? My mac mail will not close when iam finished with it, or will it open when i awake my computer is there an update i need to do??

As the message comes from AVG yo will need to read about AVG to stop those alerts.
If you think there is a genuine problem with firefox
* see [[high memory usage]] <-- clickable link -- <br/> that contains some tips and information about memory usage
* go to ''about:memory'' by keying that into the location bar <br/> the report that is generated may be of help - it gives tooltip info on mouseover of items, and has a button that tries to reduce memory usage

DW CS6 - Spry collapsible panels - How to have panel close when you click away from it?

I know typically onmouseout is used to close other items, but I could not figure it out with the spry collapsible panel. I have the panel opening onclick and closing onclick, but I would really like for it to close when you click anything else on the page outside of the panel.
Thank you!

Sorry, I did not mean other collapsing panels close when you click away from it. I simply meant in general for the closing after clicking away function, you can use onmouseout. I was working on something with collapsing panels and I wanted it to show the information when you clicked on it, but when you click on another panel, they both remain open. I really want both to close. I believe accordion does this, but not quite what I am looking for either.
Here is a better example of what I would prefer: Houston Public Library
If you visit their page and click "Find it" a box pops down with information and then when you click anywhere else on the screen, it closes that box. When you click "Research," it closes the "Find It" box and opens the "Research" box. There is likely a much better way to do this, but I am pretty new to this.
Any assistance is very much appreciated.
Thank you!

Itunes closes when i try to sync my ipod 4

itunes closes when i try to sync my ipod it says it has encountered a problem and needs to close help

Thanks for the info, anyway i just tried all of the options it gave me and its no good. It seems to be only in my account, since I could sync it in my sisters account. But my itunes keeps closing after it tries to back up my ipod :S. Im really frustrated right now, ive only had my ipod since christmas and its allready having problem ...

CAN NO LONGER DOWN LOAD MUSIC TO MY SEPERATE HARD DRIVE AS ITUNES CLOSES WHEN I TRY TO CHANGE THE SETTINGS

i am unable to down load my itunes music onto a sperate hard drive as itunes closes when i try to change the settings

i dont know much about computers but I think this happened to me before.
as I said i hardly know computers. i think I unplugged the hard drive all cables and i turned the computer off too. plug it all again and see if it grabs it again. i did it and it worked. some how the extHD gets stuck on on. so thats why I unplugged it all. I dont know if you want to try that.

IPhoto closes when double clicking thumbnails or importing

Hi, iPhoto keeps closing every time I double-click a thumbnail in an album. It also closes when trying to import photos. By "close" I do not mean crash/unexpectedly closed; the window and application just disappears.
I looked into my CrashReport logs and no iPhoto file is there. However, the following screenshot is from Console after iPhoto closed.
I'm not sure if this is the culprit but I did use the application Monolingual a week ago. I can't remember if iPhoto worked after using Monolingual. I removed every language except English, removed every input menu except AppleKeyboardsLayouts, and I removed the ARM and PowerPc architectures (which were all highlighted by default). I can post Monolingual's log file if it can be of any help to you.
Thanks for your help. I appreciate it.

Thanks for your replies guys. First I don't know happened to the screenshot I posted but here it is again. I hope you guys were/are able to get anything from it.
When I first noticed the issue I backed up my iPhoto library. Next I upgraded to Snow Leopard since this computer was running Leopard. I also upgraded to iPhoto '09 since it was running an older version. Still no fix. I then uninstalled iphoto and its pref files with appzapper and then reinstalled iPhoto '09. Again no luck. I then created a new user account and the same thing happens- no fix.
@Terrance- I opened the app Monolingual and I see that the default languages selected include: Austrailia, Canada, New Zealand, UK, and US English, which I deleted. The Language just "English" is not selected and was not deleted. Could this be it?
Thanks again. I will look into the links you provided, Madison and will be back to report with points.

Spotify closes when undocking laptop

Similar Messages

Maybe you are looking for