Spotify Connect & Yamaha Reciever problems - See the device but cannot connect.

I have a Yamaha RX-V577 reciever with Spotify Connect and update to the last firmware.
When I try to connect spotify using the Android APP, I see the device but cannot conect to it.
What are the steps you took to get to the error/issue?
1. I star a song
2. Click on the speaker sign with a circle, and click on the receptor (Yahama device).
3. The grey rounder speaker sign goes from grey to green and the sound waves moves (like tryng to connect).
4. After a while it goes back to grey.
IMPORTANT I dont know how sometimes it works, dunno how but after trying alot yesterday It worked. But cannot reproduce it.

I have the EXACT same issue BUT on a Sony STR 1050! It worked fine up until lately. Sometimes I get it to work, but mostly not. When it works, it's very unreliable and often not in synch.
It still works absolutely fine with my Computer/Spotify App. I can even tell my PC to use my AVR as sound output and the connect to my PC to listen via my AVR. But connecting directly to my AVR is a PITA. Since more users have the same problem across different AVRs, it seems to be a new Spotify problem and not an issue with my AVR.
When can we expect that this issue is fixed!? I'm using this feature constantly.

Similar Messages

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

USB port on wrt610n i can see the drive but cannot see the content

USB port on wrt610n i can see the drive but cannot see the content
I have followed the instructions I see the drive but when I try to acess the drive I get a empty new folder
help I am lostwhat should i do

winmaco wrote:
Yes i have it is working on my PC
One thing in setting up the usb I had to use a different password
my router has a password and the only way I could move forward was to use the default admin admin user name and password
I could not use my router user name and password.
The username and password for the share on your attached drive can be anything you want them to be. I assume you set up a share on the attached drive? That's where you need to add a password for the share, although for ease of use I never did assign a password to the shares.
You do know that the firmware for the Storage Link is buggy, right? File size limitations as well as file corruption issues? Connectivity issues also rise up, with the only workaround that I have found is a script that you have to run every time you boot up your computer. As far as I can see the Storage Link function is a poorly implemented idea. No firmware in sight to fix the issues, and no idea of when.

I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.

I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.

Hello,
Please refer to following article:
http://windows.microsoft.com/en-us/windows7/pin-a-program-to-the-taskbar
Regards,
Anoop

Hi There for the last few days I can log into Icloud on my pc but I can't action anything. I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc? Its working fine when I access on my iphone..

Hi There
for the last few days I can log into icloud via icloud.com on my pc but I can't action anything.
I can see the emails but cannot view them. I cannot compose a new email.. I don't know if this is icloud or my pc?
Its working fine when I access on my iphone.
many thanks
Cherry

Just realised its fine through internet explorer but its Mozilla.. so assuming an issue with my browser?

Apple TV connects to the network but cannot connect to the internet.

Apple TV connects to the network but cannot connect to the internet. Works on other Apple TV's we have just not this new one. Defective??? Thank you!

This might help:
Apple TV (2nd gen.) saw my wireless network but did not accept my password (gave a network error message). It fixed instantly doing this:
Made a note of the Apple TV's MAC address. Get it by pressing Menu on the remote, then Settings > General > About. It's called "WiFi address."
Use your browser on a network connected computer to go to your router settings (usually 192.168.1.1).
Under "Wireless > Wireless MAC Filter" (or something similar) do these steps:
Enable Wireless MAC filter
Enable "Permit PCs listed below to access the wireless network"
Enter the Apple TV's MAC address
Click "Save Setting"
When I did this the network connection immediately started working.
Note: These instructions are based on a Cisco Wireless-N Broadband, model WRT160Nv2, firmware v2.0.02.

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

When I call a iPhone or iPad user on my iMac using FaceTime, the person being call can hear the ring but cannot connect. Does anyone have any trouble shooting advise???

Need help in determing why a person receiving a FaceTime call from me cannot connect? The person receiving a call from me says that they hear my call coming in but when they try to connect nothing happens. If anyone has any trouble shooting advise or why the call receiver cannot connect let me know ASAP. I also have a MacBook Pro with the same FaceTime problem. Help! Help!

Its too bad that your phone is out of warranty because this is most likely a manufacturer fault. You need to take it back to Apple. If it is not a manufacturing fault, then go to any shop that your network owns and talk to them about this problem.

Access connections does not see wireless networks but can connect if you know the SSID

Running a Thinkpad x200 using windows 7 and Access Connections 5.42.
A few weeks ago i was traveling and was connecting to a hotel wireless network.
Could receive email but wasn't able to send email due to hotel port restrictions so long-story short version-- IT staff at hotel told me to connect via LAN. Which i did by simply plugging in LAN line to the thinkpad and to the hotel -- port -- no other changes. have done this a million times at home and elsewhere.
All is well....
until....
I get home and i notice that when i use access connections, it doesn't see any wireless connections (no icons in the radar screen). It automatically connects to my home network and i can use the home profile to connect. Same for any connection that i know the SSID for -- i can't see it but i can connect to it.
But it doesn't show any icons during "find" or find again. It only shows the home icon i am connected to. If i disconnect and try to find wireless networks. It doesn't show any.
So i know
1) radio is working
2) can connect via lan
3) can connect to a known wireless if i know the SSID and either manually configure it or if i have the profile saved
4) i have run antivirus, malwarebytes - etc -- all clean
5) have rebooted, turned radio on off
6) system restore doesn't help
7) all wireless networks are now invisible to radar screen. Have tried this at starbucks, around town - etc -- available wireless network icons are invisible
I'm not sure that hooking up LAN in the hotel did anything but it seems too coincidental. Also seem to recall a thread where this has been known to happen.
Help!!!

First off, it sees the networks. That's good. You reset network settings which usually corrects a number of problems. Let's focus on your home network and getting connected to that.
1. Reboot your router (just power it off for 10 secs). Try to connect. If it works, you are done. If not, step 2
2. Reset your network settings again. However, this time log onto your network by tapping Settings > WiFi > Other and re-entering your network name, security settings, and password.
Check your connection by tapping the blue > next to the network name with the checkmark. If your IP starts with 169.x, then you are connected but your router is not issuing you an IP address. This leads to a couple of additional problem areas - WEP encryption and outdated router firmware.
If you continue to have problems, tell us which router/model, security settings used, etc.

Bluetoothctl successfully pairs with device but cannot connect

Hello,
I'm trying to get my phone (nexus 4) to connect to my computer. I have bluez and bluez-utils installed. I've been able to successfully pair the device with my phone, but I can't connect to it.
Here's some output from bluetoothctl:
$ bluetoothctl
[NEW] Controller 60:36:DD:40:E8:C6 BFL-Arch [default]
[bluetooth]# power on
Changing power on succeeded
[bluetooth]# scan on
Discovery started
[CHG] Controller 60:36:DD:40:E8:C6 Discovering: yes
[NEW] Device 98:D6:F7:DB:84:D8 Nexus 4
[bluetooth]# pair 98:D6:F7:DB:84:D8
Attempting to pair with 98:D6:F7:DB:84:D8
[CHG] Device 98:D6:F7:DB:84:D8 Connected: yes
[CHG] Device 98:D6:F7:DB:84:D8 Modalias: bluetooth:v001Dp1200d1436
[CHG] Device 98:D6:F7:DB:84:D8 UUIDs has unsupported type
Pairing successful
[CHG] Device 98:D6:F7:DB:84:D8 Connected: no
[bluetooth]# connect 98:D6:F7:DB:84:D8
Attempting to connect to 98:D6:F7:DB:84:D8
Failed to connect: org.bluez.Error.Failed
[bluetooth]#
I'm trying to set up my phone to send keyboard input to act as a kind of remote control for pianobar. Does anyone have an idea why this might not connect?
-Nia
EDIT: I've looked into the problem a little bit more and it seems like it has something to do with audio. I've set the default agent to KeyboardOnly, but the error still persists. Despite this, I've tried installing pulseaudio-git, which hasn't messed anything in my system up just yet, but has done nothing to fix the problem. I also tried reverting to bluez4. bluetoothctl refused to acknowledge hci0 (my device) and wouldn't work, the bluez commands worked somewhat, bluez-simple agent works, but you need to specify hci0 before the address, this works. Any other bluez command will fail. I've reinstalled bluez since (bluez5).
Last edited by dragos240 (2014-03-11 17:52:22)

My device is an IX12-300r with 4.08 firmware. I have 4 volumes setup as iSCSI targets. Two were the orinigal volumes on the drives that came with the device and are still accessible. Those are working, fortunately, and still able to be connected as iSCSI targets.  I purchased 4 x 3 TB drives in December and setup two more volumes as iSCSI targets for additional resources on our servers/network. All worked well with the new volumes/iSCSI targets until 3 weeks ago when the system was restarted.    Now, althoug all the volumes are still present, the iSCSI page on the Web UI shows only the two original volumes are iSCSI targets. The new volumes are not present there and therefor not accessible from the Microsoft iSCSI initiator.    I've installed the Lenovo Storage Manager for Windows: Version 1.4.4.14439 to check if it could connect the other targets, but sadly no.
So I called Lenovo to see if I could get some support, knowin that it was out of warranty, and so expecting to pay per incident. BUT that's no longer available, and they don't offer extended warranties on out of warranty products. SO BUY an extended warranty NOW if you plan on keeping this product. Better yet ditch it and get something that offers support beyond "I'm sorry we can't help you at all. I suggest you call data recovery service if you want your data back".        :- P
Any idea how much it would cost to recover 4 TB of data?!?
This product is being ruined by Lenovo and their decisions to remove support options previously available. I would STRONGLY RECOMMEND anyone using these products to think twice!   Also, I'm an IT consultant and have been steering all my clients away from ANY LENOVO products, Thinkpads, Servers, desktops, to avoid runnning into this kind of issues. My reputation is on the line when I make recommendations to my customers and cannot possibly consider using products with this kind of support.

One website is compressed vertically so I see the site but cannot rad it.

When I go to this website: http://www.500eboard.com/, the site appears and apparently connects. Problem is that the page is all sqeezed together vertically such that it cannot be read. I can make out buttons for selections and they work, but each page that comes up is in miniature. These teeny tiny pages are impossible to use. No other website has this problem. The eboard was chosen from my bookmarks; other bookmarks work correctly. Never had this problem. I cannot contact site because I cannot read contact info.
jk

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Websites+look+wrong

HT1595 Apple tv will connect to the network but cannot connect to the Internet

My apple tv is connecting to my network but it says it cannot connect to the Internet. I've already tried restarting everything and I've also connected it to my portable mifi network with same results. Anybody have any ideas?

This is what the MAC address clone looks like:
Should I enable it? If so, should I put something in the MAC Address? What? I was able to connect it thru my MiFi, but not my home network. Until today, it's been connected to my home network for about 8 months with no problem. Haven't used it for a while...not since I got a new router.

I upgraded Thunderbird and now can see the Inbox but cannot get to the emails, only see the inbox with 5 messages.

I upgraded Thunderbird a few minutes ago, but now I see there are messages in my Inbox, but I can only see the folder, the emails are not accessible. Nor can I seem to send messages, read messages, get to my Address book. I have normal menu bar at the top, the left panel is the normal list of folders, but on the right where I should see emails, as I have clicked on the Inbox, I see
Thunderbird Mail - Inbox
EMAIL
Read messages
Write a new message
Accounts
View settings for this account
Create a new account
Email Chat Newsgroups Feeds
and so on, These are listed in groupings, which I can't effectively show, but I can't do any of these things.

''realfire [[#answer-666634|said]]''
<blockquote>
''realfire [[#question-1037151|said]]''
<blockquote>
I upgraded Thunderbird a few minutes ago, but now I see there are messages in my Inbox, but I can only see the folder, the emails are not accessible. Nor can I seem to send messages, read messages, get to my Address book. I have normal menu bar at the top, the left panel is the normal list of folders, but on the right where I should see emails, as I have clicked on the Inbox, I see
Thunderbird Mail - Inbox
EMAIL
Read messages
Write a new message
Accounts
View settings for this account
Create a new account
Email Chat Newsgroups Feeds
and so on, These are listed in groupings, which I can't effectively show, but I can't do any of these things.
</blockquote>
I even uninstalled Mozilla and then reinstalled it, but apparently, that didn't work, as it found my account settings, instead of my having to reset them and I was right back where I was before.
</blockquote>
Actually it did not answer my question, I still need resolution.

Can connect to Netflix etc, via the MacBook, but cannot access on HDMI TV using Airport Express.

I just chose a trial Netflix account. I can connect with Netflix or Youtube, etc via the MacBook, but can't access anything when trying to access same on my HDMI TV through my new Toshiba Blue Ray Disc player. (using my airport express connected to my Time Warner router.) It recognizes my locked, wireless network, but times out before connecting.

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

Spotify Connect & Yamaha Reciever problems - See the device but cannot connect.

Similar Messages

Maybe you are looking for