Spotify stuck on Login

Hi,  I've never posted before so I'm sorry if I'm doing something wrong. 
I've looked on the forum but can't seem to find a solution to my problem.
I recently got an Asus tablet (fonepad 7) - KitKat. I installed Spotify but after I try to login through Facebook (Facebook works fine) the app just gets stuck on the login page, the one with "Logging in, please wait..." and the green moving circle. I tried waiting up to an hour and a half, it's still stuck. I tried deleting the app, reinstalling it, deleting the folder, etc. I tried earlier versions of the app, still same results. I also upgraded to Lollipop and tried Spotify again, no change.
I've got no idea what could be causing this, because the app works perfectly on my phone. What's different with this tablet?
Thanks for any help!

I would go on the computer, and disconnect from facebook. That will make your credentials not linked to facebook. Then go to forgot password, and reset it -- after you do that, log in on the phone, and then you can connect it to facebook without issues (hopefully). Hope it works!

Similar Messages

  • Stuck in login window after upgrading to Mavericks

    I am unable to login with my (admin) account after upgrading to Mavericks yesterday.
    This was very unfortunate considering that I didn't backup my data !!
    On reboot (I do not remember whether it was the first or second time) I couldn't login anymore as I usually did.
    I tried different procedures (entering secure mode, repair permissions, reinstall 2 times Mavericks) but cannot solve the stuck.
    Then I thought it could be a nice idea to create a new admin user and followed this instructions (http://www.hackmac.org/tutorials/how-to-create-a-new-administrator-account/).
    After that I was able to login with the new user, I backed-up my data but I was still in stuck on login window with the old user.
    I tried to delete
         com.apple.loginwindow.plist
         com.apple.recentitems.plist
    from /Users/XXX//Library/Preferences/ and tried to restart but nothing.
    Now I wonder how my old and important user can start working again.
    Thank you very much.
    Giuliano

    Restart and hold down the Command and R keys during startup.
    On top, in the Menu Bar click the Utilities item then select Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The Password reset utility launches/
    Reset password.
    Restart

  • Lion Stuck at login screen,can't type password

    My OSX Lion stuck at login screen,when I type password it just "beep" and I can only type few words.I just had those problem before..But since the battery ran out,and I gonna login...then I can't type the password...please help me....
    P.S. My keyboard and trackpad is not working before,my keyboard can't type and my trackpadcan only do right click..

    What year and model of MacBook Pro do you have?  I'm wondering if the factory installed battery is failing due to age or use.  A MacBook Pro battery can be recharged about 300 times before it becomes unuseable.  Is this possibly the problem?
    Hope this helps

  • Stuck in login page

    stuck in login page while i entered the correct or incorrect password or username. how can i leave this page? tried reset it but login again, same problem occurs. stuck on the login page. please help. thanks.

    Close the Internet browser and reopen it to access the Internet.
    Clear browsing history, cookies and temporary Internet files. Or simply restart the computer.

  • IMac purchased at garage sale help. Gets stuck at "Login Window Starting."

    Hi all,
    I recently purchased an iMac at a barn sale, and it turns on and everything, but then gets stuck at "Login Window starting" screen (http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0251.jpg). When Goggling this problem, I see that I am not alone in thee problem, but I am alone in the fact that I don't even know what model it is (I think G3, but not sure), let alone have the original CDs or paperwork. I have tried holding 'shift' right after the startup chime to start up in safe mode, but it still gets stuck at "Login Window starting." I have attached a few pictures of the computer to help you veteran Mac users identify it, which might help you help me. Any help is appreciated. (Step-by-step instructions are best, I am good at using a Mac, but this is getting pretty technical.)
    Thanks!!!
    Photos:
    http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0253.jpg
    http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0254.jpg
    http://i605.photobucket.com/albums/tt135/gpd2paul4/IMG_0255.jpg

    Try holding down the shift key when powering on. This will skip a few programs from loading.
    Hold down the shift key when booting into Mac OS X. this will check your file structure and do a repair. This will also leave off some files from being used.
    http://support.apple.com/kb/HT1455
    "What is Safe Boot, Safe Mode? (Mac OS X) "
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Try holding down the option key when powering on. This will bring up the startup manager. Perhaps 9 is installed. Click on icon then click on right arrow.
    This is an iMac g3 slot loader.
    Your Mac won't start up in Mac OS X (Mac OS X 10.3.9 or earlier).
    http://support.apple.com/kb/TS1411?viewlocale=en_US
    Which iMac Is It? OK here are some more comparison charts:
    http://lowendmac.com/macdan/05/0202.html
    http://docs.info.apple.com/article.html?artnum=58669
    You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
    What is firmware?
    The firmware software receives control when you poweron your machine. It does some hardware testing and some hardware configuration then passes control to your version of Mac OS. It reside on a PROM ( program read only memory ) chip on the logic board.
    Open Firmware, boot into Open Firmware.
    Power on your iMac while holding down commandoption+of
    The first output line contains the firmware level. Mine reads:
    Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
    Copyright 1994-2001 Apple Computer Inc.
    On my machine, I have 4.1.9f1.
    What firmware do you need?
    http://docs.info.apple.com/article.html?artnum=86117
    For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
    http://docs.info.apple.com/article.html?artnum=75130
    "The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
    You can download the Mac OS 9 updates from the Apple site.
    http://support.apple.com/kb/HT1387?viewlocale=en_US
    For tiger, you need 256meg of memory.
    Mac OS X 10.4: System requirements
    http://support.apple.com/kb/HT1514
    There is no need to partition. You can save hard drive space by doing a custom install. Leave out the print drivers you do not need and the languages you do not need. Doing so you will need about three gigabytes of space.
    You need to get into single use mode.
    This page will tell you how to get into single user mode.
    http://support.apple.com/kb/HT1492
    Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar
    When you are in single user mode, you are in Unix. you can try looking in the log files to see if you can find anything.
    To see the current boot log you use the dmsg command.
    dmsg
    startup information is in /var/log/system.log
    to display the last 500 lines use the tail command.
    tail -n 500 /var/log/system.log | more
    For these commands you will need to gain write access to your startup disk. There are some comments at the end of the startup process that list the needed commands.
    mac $ ls -lF ~/zztemp.txt
    ls: /Users/mac/zztemp.txt: No such file or directory
    mac $ tail -n 500 /var/log/system.log | cat > ~/zztemp.txt
    mac $ nano ~/zztemp.txt
    mac $
    I assume the message contained /Library/Logs/CrashReporter. Do a change directory:
    cd /Library/Logs/CrashReporter
    mac $ pwd
    /Library/Logs/CrashReporter
    mac $ ls
    ???.crash.log VoiceCenter.crash.log
    Exited process.crash.log
    mac $ tail -n 400 \?\?\?.crash.log
    Host Name: ???
    Date/Time: 2008-09-15 14:28:37.577 -0400
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Robert

  • Can not sign into iCloud, IE9 stays stuck on login screen

    I Can not sign into iCloud, IE9 stays stuck on login screen

    This solved my question: Turned off auto complete for Norton 360 for this page.Now working with no issues

  • After update, keyboard and trackpad does not work on MBA but wireless mouse works. I don't use a wireless keyboard. Stuck at login because need to enter pw. Anyone have this issue? Please help!

    My Macbook Air (13", mid 2011) right after I did the Maverick OS update. My keyboard on Macbook Air is not working and it says "There isn't a keyboard connected" (Bluetooth Keyboard Setup). I do not use a wireless keyboard. Apparently my bluetooth works because my wireless mouse works. I am currently stuck at my login screen not being able to get in because I can't even enter my password. I am, however, able to login as guests and get to the Keyboard viewer to type things with my wireless mouse. I really need my keyboard to work to use for my job. I need help please!

    I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too! 

  • Adobe Download Assistant- Stuck at login?

    I downloaded Adobe Download Assitant today, finally having gotten it to download. However, after opening and attempting to login, I realized something: I was stuck on this screen! What is this, why is it stuck like this, and how do I make it go past this?

    Does it give you any specific error message?
    Are you behind a Firewall that might be preventing the Download Assistant to communicate with Adobe.com?
    Please also have a look at: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html. This document lists some common errors and resolutions.
    Let us know how it goes.

  • Stucks at login using Windows 10

    After entering my credentials it simply darkens the green "login" button and stucks. The button is not clickable again, no error message. Complete reinstallation doesn't work. 

    I'm having the same problem right now, no help from anywhere...

  • Stuck at login screen after Lion install

    I downloaded and installed Lion on my late 2008 mbp with the latest updated snow leopard and after the install, I'm stuck on a screen with icons of my users. If I click nothing happens. I tried repairing disk permissions as well as re-installing Lion but nothing has helped. Any ideas?

    You might see if this works:
    Clearing Caches to Fix Login Problem
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
    /sbin/fsck -fy
    Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    cd /System/Library/Caches
    rm -r *
    reboot
    Press RETURN after each command.
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).

  • Stuck at login screen after update froze

    Hi everyone, I have a Macbook that is a couple years old and have Leopard on it. Last night, I was prompted to install several updates and then restart my Macbook. I did so and then the updates began to install, but then appeared to stall. I hit the power off button and then turned my Macbook back on again. This brought me to the login screen, but I don't have my Macbook set to require me to login each time I use it. I entered my password and then it went to the blue screen like it was about to bring me to the desktop. But that didn't happen. It brought me back to the login screen, which is where I am still stuck as of this writing. Is there anything I can do? Thanks for your help.

    No guarantee this will solve your problem, but you can give it a try:
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-User mode by holding down the command (Apple) key and the 's' key while you press the power switch. You can let go the keys when you see white text on a black background. When this has finished you will see a prompt ending in '#', although there may be other messages. Type
    /sbin/fsck -fy
    followed by a return, at the prompt and wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    rm Extensions.kextcache
    cd /System/Library/Caches
    rm -r *
    reboot
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
    If you get error messages saying files do not exist, just ignore them and type reboot.
    If the above is unsuccessful then you may be able to reinstall OS X using an Archive and Install which does not erase the hard drive:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Stuck at login screen after update 10.4 to 10.5 powerbook G4

    I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
    any help? thx !

    suburbya wrote:
    I installed Leopard successfully, but when i restarted my PB G4 it gets stuck at the login screen, it keeps giving me that rainbow colored waiting symbol, can't even turn it off without the power button...
    Welcome to Apple's discussion groups.
    Try booting with "safe mode" (http://support.apple.com/kb/HT1455) by holding down a "shift" key during the boot process. If that's successful, the problem is due to something within your account, possibly something that's incompatible with Leopard. Locating that thing could be an involved process. In the short run you might want to create a second user account and use that while you're repairing your main account.

  • Stuck at login

    I am stuck at the login screen. I just restarted, holding down the shift key, and on the login screen I now see the words "Safe Boot" in the top right corner in red letters. What does this mean? Thanks.

    You started up the computer in the Safe Mode.
    To leave Safe Mode restart from the Apple menu.
    For info about Safe Mode:
    http://support.apple.com/kb/HT1564
    Best.

  • IMAC G3 Stuck On Login Window starting

    I have a blue IMAC G3 with OS X Panther.
    I was tampering with files years ago on this computer and deleted a file that stops the computer from going past "Login Window starting".
    I have tried the trick where you reset everything on the computer except your files by using the commands
    mount -uw /
    and
    rm /var/db/.applesetupdone
    (if i didn't type right now, i did at the time and it says that it doesn't exist.)
    I also tried going into safe mode and it was still stuck.
    I tried pressing the option, apple, r, and p keys 3 times trick and it didn't work.
    I bought the Mac OS X cds to rewipe it and the cd drive doesn't work.
    I thought the cd drive had something in it so i tried a trick to use the emergency cd thing with a ruler and also tried to use a utility which both didn't work.
    So since all that didn't work, I was wondering if someone could help me solve whats wrong in different ways then that.
    Do you think I can wipe it with a usb containing Mac OS X Panther? If i could how would I do this.
    When I bought this computer it completely worked, even the cd drive, after I tampered with it, it hasn't been the same. This is a dead loved ones machine and I would like it to work again for a two year memorial on 4/20.
    Please get back fast so I can have it ready in two days.
    Thanks!

    Does this blue iMac have a slot-loading or tray-loading optical drive?  If it's a slot-loading type and if the iMac has a FireWire port, an external FireWire optical drive should boot the computer for installation of the OS.  Keep in mind that the slot-loading iMacs have shown a tendency to develop problems with the PAV board (the major power-providing component) with age.  When this occurs, the wise thing is to retire the computer.  There are no new PAV boards and the expertise level required for replacing one would be described as "very skilled," because of the potential for serious electrical shock or worse.  Because of this, you should decide how much money you'd want to invest to get it up and running.  An external FireWire DVD±RW drive is $99 at Other World Computing.  You might find a suitable external FireWire drive at ebay — even an older CD-ROM, CD-RW, or DVD-ROM.  For that matter, you might also find a used/pulled internal optical drive for the slot-loading iMacs, which would be a CD-ROM, CD-RW, or DVD-ROM drive.  Pulled drives are also old and likely to have high mileage.  The slipping problem with old slot-loading drives, wherein the disk needs a push on insertion or a yank on eject, is also very common and the result of dried out rubber rollers that have lost their natural capability to grip the disks.

  • Stuck on "login window starting"

    My computer will not get to the login window. It's stuck trying to bring the login window up. Help!

    What type of Mac mini is it - PPC or Intel? When did it start suffering this problem? Does it 'hang up' in the grey screen with Apple logo, the plain blue screen or the blue screen with progress bar?
    The fact that the system begins the startup process is a relatively good sign, since that means it is at least getting past the power-on self test, so thus the basic hardware is OK. However, depending on where exactly the startup is hanging, it's possible you have a 'damaged' copy of MacOS on your hard drive, or that the drive itself has a problem.
    The first thing I'd try in this situation is to insert the system's original install disk, and then reboot, holding the C key down to force it to start from the install disk rather than the internal hard drive. If that works, not only does it show the system is basically healthy, but also give you access to Disk Utility, which will allow you to check the drive to make sure it's OK. If you can run that and select the internal drive, then click "repair drive' it will report if there are any problems and try and fix any it finds. If there are errors and it fixes them, the system may then boot normally. If if doesn't, or finds errors and reports 'error on exit' it means the drive is corrupt and may need to be reformatted. (Beware, doing so will loose all your data).
    The install disk also allows the system to be fully reinstalled, should that be necessary, but do not take that step unless and until you have checked the drive with Disk Utility!

Maybe you are looking for