Spotlight can't remember Bootcamp partition in Privacy

Snow Leopard 10.6.1
Whenever my (original) MacBook is restarted, or shut down and started up again, Spotlight doesn't 'remember' that I had put the Bootcamp partition in Privacy. This is getting annoying as I have to remember to put it back. This behavior didn't occur in 10.6.0... Is there something I can do to persuade Spotlight to remember?

Phew - Thank you! Indeed, it must be disabled by default now. After I checked it once, I decided I'd better restart and check it again. No wonder the drive won't stay in Privacy, there's no need...
That's it for me, and I never want to index the BootCamp partition, or any other drive (i.e. external) for that matter, (I can tell you that the Mac partitions show up in Privacy when the external HD is turned on and the Windows partitions, DOS, do not) but maybe somebody else following this does.
"if you use NTFS-3g then spotlight should be able to index your bootcamp drive"
Thanks again!

Similar Messages

Want to install windows 7 64bit only partitioned for 20mb in bootcamp can i increase bootcamp partition before installing?

Want to install windows 7 64bit only partitioned for 20mb in bootcamp can i increase bootcamp partition before installing?

Yeah, just open Boot Camp Assistant, restore the hard drive to a single partition and then redo the partitions again. You should have a bare minimum of about 50GB as @The hatter said. You might want to just divide equally, that's usually the easiest thing to do.

Can't mount bootcamp partition in 10.9.5

Hi, I'm only able to boot into my bootcamp partition by restarting the computer and holding down alt/option. When I'm in OSX, I'm only able to see the partition in Disk Utility, and it's greyed out there. I just installed Windows 8, updated to windows 8.1, and then installed a mavericks update. I guess somewhere along the line the bootcamp partition got disconnected from mavericks?
I did some googling and I think I need to do something in gdisk to fix it, but I'm not sure how that works. Here's my output from
sudo fdisk /dev/rdisk0
Disk: /dev/rdisk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 967470968] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 967880608 -    1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 969150464 - 983451648] HPFS/QNX/AUX
and from sudo gpt -r -vv show /dev/rdisk0
gpt show: /dev/rdisk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/rdisk0: Suspicious MBR at sector 0
gpt show: /dev/rdisk0: Pri GPT at sector 1
gpt show: error: bogus map
gpt show: unable to open device '/dev/rdisk0': Undefined error: 0
Any help would be appreciated! I already installed gdisk successfully, just have no idea how to use it.

Yeah, and actually I tried using gdisk because I hadn't gotten any replies, I really messed up what I had and now I can't boot into windows ^^;
Here's a new version of those previous two. Somehow BOOTCAMP turned into XENIX, I have no idea how or what that means (nothing good probably)
sudo fdisk /dev/rdisk0
Disk: /dev/rdisk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 -   25 127 14 [         1 -     409639] <Unknown ID>
2: AF   25 127 15 - 1023 254 63 [    409640 - 967470968] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 967880608 -    1269544] Darwin Boot
*4: 03 1023 254 63 - 1023 254 63 [ 969150464 - 984373248] XENIX /usr
sudo gpt -r -vv show /dev/rdisk0
gpt show: /dev/rdisk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/rdisk0: Suspicious MBR at sector 0
gpt show: /dev/rdisk0: Pri GPT at sector 1
gpt show: /dev/rdisk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   967470968      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
   967880608     1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
   969150152         312
   969150464   984373248      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
And here's some other stuff that might be helpful
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            495.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                504.0 GB   disk0s4
sudo gpt -r show -l /dev/disk0
gpt show: /dev/disk0: Suspicious MBR at sector 0
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - "EFI System Partition"
      409640   967470968      2 GPT part - "Untitled"
   967880608     1269544      3 GPT part - "Recovery HD"
   969150152         312
   969150464   984373248      4 GPT part - "BOOTCAMP"
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header

Can't remove bootcamp partition

Hi all, I have a late 2012 27 inch iMac with a fusion drive. I have attempted to bootcamp Windows 8 following various posts here and elsewhere. Short story - its failed on each and every attempt, and now it seems as though I am stuck with a dud bootcamp partition.
I created a windows install USB for windows 8 and later windows 7 and created a bootcamp partition with the bootcamp assistant. The USB key was created without error. But when the system rebooted to start the Windows installation I got a message saying there was 'no boot device'. I tried various fixes including using rEFIt and creating the USB stick using microsoft's tool. Nothing has worked.
I would like to delete the windows partation and start again (don't know if this will make a difference, nothing has worked so far). I have tried to remove it with the bootcamp assistant (ticked the "Remove Windows 7 or later version" tick box), no go, just get a blue and white striped status bar. Tried in Disk Utility, also no go.
Just don't get why bootcamp installation is so painful and time consuming. Any advice on removing the dud bootcamp partition welcome. Any tips about which USB devices are suitable for Bootcamp would also be appreciated.
Thanks.

stevec1234 wrote:
I wonder how / if the right files will go to the right disk within the fushion volume (ie system files to the SSD) when cloning back with Carbon Copy Cloner. It's supposted to 'just work', but then so is bootcamp...
They should, but let us know if they don't. Please remember that the actual location of any file is decided by the OS.

Can't Reacquire Bootcamp Partition Space

I wanted to delete Windows, so I tried deleting its partition via Boot Camp Assistant, and surprisingly enough it crashed in error.
I then launched Disk Utility and tried to reacquire the now-unpartitioned space by stretching the "Macintosh SSD" partition over it, and that failed, too. Here's a screenshot of the error I'm getting:
I also tried repartitioning the unallocated space into a new MS-DOS (FAT) partition, which did work, but not for using it for a new Windows installation with Boot Camp.
I'm pretty much out of ideas, and I'd very much like the space back without having to reinstall OS X from scratch, if possible.

Well, I lost about a month or so of updates and such, but at least i got my missing gigs back.
On a sidenote, a linux-ninja friend of mine recommended this handy little tool, which, weren't it too late, I'm pretty sure would've saved me a lot of trouble: http://gparted.org/

Upgrading MacBook Pro Hard Drive - cannot get Bootcamp partition to work

Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Can I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
Thanks

Hmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa

Help! Win 8.1 Bootcamp partition vanished

Hi all
My Windows 8.1 Bootcamp partition has vanished.
Last night I was playing a Windows game, all was well and I shutdown the machine at the end of the night. This morning I got up, powered up the Mac Pro and noticed it was stuck in an OSX reboot cycle. I held the alt key down and the 3 boot partitions popped up OSX, Recovery, Windows 8. I selected Recovery and ran the Disk Utility, "Check" disk tool. It reported that the EFI was bad so I clicked on Repair. It then said it couldn't repair it. I rebooted again and this time there are now only two options, OSX and Recovery. I clicked OSX which loaded fine. I have no idea how this happened when the machine was off over night and fine the night before in both Windows and OSX.
So now I have no way to boot into Windows on my new Mac Pro 2014 machine.
Bootcamp is on the internal SSD along with OSX
I have never resized the partitions
I have not installed anything new in the last few weeks
I do not visit dodgy websites and run Malware bytes anti malware regularly (never found an issue to date)
Last night I added a secondary HDMI monitor
The day before yesterday I unplugged everything and rearranged my office
I uninstalled Parallels Desktop Trial (expired) 1 week ago from both Windows and OSX
I have backed up the Bootcamp partition to an external drive using Disk Utility
I CAN browse the bootcamp partition using finder and the folders and files are all visible.
New Mac Pro. 512GB SSD, OSX 10.9.3, 16GB Ram, Thunderbolt Display, HDMI Dell Display
Any help would be much appreciated as some of my key work software is on the BOOTCAMP windows install.

There is overcharging protection in the battery and the adapter, both. This can also be seen on OS X side under System Report -> Power. If you adapter is plugged in and the battery is charged, it will say 'Not charging' despite the fact that the power adapter is connected.

Can i merge bootcamp partion with mac using parallels

I installed win 7 via bootcamp, now i installed parallels and using win 7 via my bootcamp (parallels). since i installed parallel can i merge bootcamp partition with macintosh hd, without reinstalling win7 for further use

Not sure check with the Parallels helps section and or there forums.
The reason I say this is if Parallels Created a Virtual Machine File for that BC install then Yes you can use Boot Camp assistant to delete the Windows Partition and that will merge it back into the Mac partition and not disrupt the Parallels VM of Windows.

Bootcamp partition won't load on startup after Yosemite upgrade

Hi!
I have a similar problem like others before, but I tried to fix it like described but it didn't work.
Here's my output:
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            199.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         20.2 GB    disk0s4
diskutil cs list
No CoreStorage logical volume groups found
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=250059350016; sectorsize=512; blocks=488397168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 488397167
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 389244168      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
389653808    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
390923344   58022832
448946176   39450624      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
488396800        335
488397135         32         Sec GPT table
488397167          1         Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 -   25 127 14 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 389244168] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 389653808 -    1269536] Darwin Boot
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
testdisk
Disk /dev/disk0 - 250 GB / 232 GiB - 488397168 sectors (RO)
Current partition structure:
     Partition                  Start        End    Size in sectors
1 P EFI System                    40     409639     409600 [EFI system partitio
2 P Mac HFS                   409640 389653807 389244168 [Customer]
3 P Mac Boot               389653808 390923343    1269536 [Recovery HD]
No FAT, NTFS, ext2, JFS, Reiser, cramfs or XFS marker
4 P MS Data                448946176 488396799   39450624 [Microsoft basic dat
4 P MS Data                448946176 488396799   39450624 [Microsoft basic dat
a]

You have been bit by the Yosemite/Windows resizing bug.
390923344   58022832
448946176   39450624      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Have you used any tools to resize your Windows partition at any time prior to the Yosemite upgrade?
Here is a reference thread that you can follow - Missing Bootcamp Partition (with pastes!).
You are in Testdisk Quick Search, you will need to run Deeper Search to find your lost 'NTFS' partition.

Windows 8 woes on bootcamp/partitioning/help please!

So, I ordered a copy of windows 8 OEM edition 64bit. I'm on a late 2012 macbook pro 13 inch with mac os x 10 mountain lion.
I recieved it, started up bootcamp did as it said and then when i came to installing windows the partitioned hard drive I'd created (100gb) for windows wasn't useable. Windows 8 said "can't use *bootcamp partition I forget the exact name/perhaps partition 4*. Windows gave me the option to format the drive. So i did. And the drive was then obviously no longer boot camp and has turned into a standard NTFS drive (I'm not that clued up on this go easy on the terminology for me!). In short, I then continued to install windows 8 on a none bootcamp partition.
This installation doesn't have the drivers needed (probably from bootcamp) for use of the macbooks dvd drive or the volume/media/keyboard light buttons it doesn't recognise the wifi card or anything..
So i guess I need to know these things:
1) how do I uninstall windows 8 from that partition and then restore that partition to recreate the whole, original volume? Is there a way of uninstalling windows that means I can use it again (i.e. I don't want to be paying another £60 for the privilage of a new license)
2) how do I do the PROPER bootcamp installation? and what happens if I hit that bit where windows 8 doesn't like the bootcamp partition i created?(i know not to format the hard drive now!)
Thanks for any help guys, much appreciated!

Welcome to the Apple Support Communities
First of all, Boot Camp isn't compatible with Windows 8 because Apple hasn't released Boot Camp drivers for it, so do it at your own risk. If you don't want to break the Mac, install Windows 7.
SlugsForBrows wrote:
1) how do I uninstall windows 8 from that partition and then restore that partition to recreate the whole, original volume? Is there a way of uninstalling windows that means I can use it again (i.e. I don't want to be paying another £60 for the privilage of a new license)
If you didn't erase OS X, press X key while your Mac is starting to start into OS X, open Boot Camp Assistant and follow the steps to erase the Boot Camp volume.
SlugsForBrows wrote:
2) how do I do the PROPER bootcamp installation? and what happens if I hit that bit where windows 8 doesn't like the bootcamp partition i created?(i know not to format the hard drive now!)
Thanks for any help guys, much appreciated!
Open Boot Camp Assistant and follow the steps to install Windows. When you are on the partitioning screen, format only the BOOTCAMP volume and install Windows on it.
Boot Camp Assistant will ask you to download the drivers, but now they are useless for Windows 8

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout is greyed out and is stuck on 'Current'. What can I do?

I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.

My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so.

Can I install Windows 8.1 as Bootcamp partition from OSX Mountain Lion using a USB stick?

I have the following:
Bootable USB stick with Windows 8.1 - 64 bit
MacBook Pro with Mountain Lion 10.8.5 - it's probably 3-4 years old.
The Bootcamp partition currently has Windows 7 installed.
I want to know whether I can install Windows 8.1 from a USB stick into a Bootcamp partition. Apple's article on the topic refers to Bootcamp 5.1, but my OSX install has Bootcamp 5.0 - I am assuming 5.1 comes with the Mavericks version. I don't want to upgrade to Mavericks because I am running out of space as it is on the OSX partition.
Thus my question. So can I?

Your laptop has a DVD drive, right? If so you need to burn your ISO to a disc, will not work off USB

How can I restore Windows 7 to Bootcamp partition - not reformat the entire hard drive?

Hello Apple (Mac) Community,
I originally posted this question over on answers.microsoft, but no help was forthcoming. Hope someone can help me with a problem that's (almost) making me nuts! I teach graphics to college students. In brief: I run Windows 7 Pro 64 on a Mac Pro tower, along with Snow Leopard (OSX). Windows is loaded on one partition of a 1TB drive. The other partition is a Mac backup. The Mac OS is on a different drive. Everything was going swimmingly with both OS, until recently. Unfortunately, the drive with Windows showed problems and I determined that the HD was either toast or needed a total reformat. My Mac data was all backed-up. Now I wanted to backup Windows so I can easily get back to the relatively happy point of my Windows 7 experience (drivers loaded, dual monitors all working, etc.). I did some online searching and the recommendation was to create a "system image" of the existing Windows 7 install by attaching an external drive, formatting that to NTFS and selecting "backup to image" in Windows. I did that and also took the opportunity to "create a backup disc" on a DVD. (Windows recommended). Next I rebooted back to Mac OS and completely reformatted the problem 1TB disc to a single partition, zero all data, just to see if it would actually reformat. It all worked! So far, so good. Next I used Bootcamp to create two partitions, one for Windows. I then restarted using the Win7 Pro (64) install disc, reformatted the Bootcamp disk to NTFS (as required) and installed Windows 7. After all that is completed and all working, I next try to use the restore from image function while booted in Windows. I'm instructed to restart from the Win install disc, which I do. Here's where things get difficult. When I try to choose restore from image, at that point the installer asks which drives to I want to exclude... but does not show partitions, only full HDs. I do not want to reformat the entire 1TB drive. I only want Windows on the 120gb Bootcamp partition (which is already formatted for Windows BTW). I spent a lot of time online reading through articles with users having the same frustration.
So here (at long last) is my question: How can I either restore Windows just to a Bootcamp partition... using "Windows System Image" or if that can't be done... can I somehow import all of the settings, etc. from the "image" (image is on external HD) into a fresh Win 7 install? So far the "backup disc" also seems useless. I can't even boot to Windows from it. BTW Apple folks: the only response on the MS side was that some "expert" simply posted links on how to install Windows and restore... not helpful with my particular problem of restoring to a partition.
Any help would be appreciated! Hopefully some help that even a Mac user / new Windows user could understand would be better! Thanks!
-melt

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

I installed win 8.1 on my iMac on the bootcamp partition and can't access OSX anymore. What am I doing wrong?

Ever since I installed Windows I don't have an option to switch to Mac.I installed it on the bootcamp partition with the lastest OSX and Windows versions. I did this a few years ago with an older Mac and Vista and remembered a prompt to choose OS during boot. I get nothing but Windows now. Any ideas?

if you restsrt and hold down alt, what boot options do you see
try restarting holding down command+R, choose disk utility and tell me what you see on the upper left hand side under the name of your physical drive

Spotlight can't remember Bootcamp partition in Privacy

Similar Messages

Maybe you are looking for