Spotlight cannot find Flv files then can

Spotlight cannot find Flv files then can - why?
Message was edited by: Howell Edwards

HI,
Go here. Spotlight Tips
Open System Preferences - Spotlight to configure your Spotlight search results.
Carolyn

Similar Messages

Spotlight cannot find any files on an OS X Lion server. Any ideas?

Spotlight cannot find any files on an OS X Lion server.
Spotlight keeps on "losing" the files on the system. Spotlight searches will show applications, but no files. Rebooting the system will cause the files to start appearing again in searches, but the problem re-occurs within a day or two of the reboot. Removing and re-adding the volume with mdutil has the same effect as rebooting the system, but is much slower due to the re-indexing once the indices are deleted.
$ sudo mdutil -sv /
          Indexing enabled.
          Scan base time: 2011-11-07 15:43:31 +0000 (1209505 seconds ago), reasoning: 'scan required - mount side'
So it seems to know it needs to scan the volume. When I do
$ sudo mdutil -i on /srv/store2
I then get
$ sudo mdutil -sv /srv/store2
/srv/store2:
          Error: unexpected indexing state. kMDConfigSearchLevelTransitioning
Which would assume means it's changing from an unindexed state to an indexed one.
There is no Spotlight config that would prevent Spotlight from locating the files in question. The index just appears to be inaccessible. mdutil -s / shows "Indexing enabled" for / (the mount point in question) and "Indexing disabled" for /srv/store2, another folder it should be indexing.

Update
After reboot, mdutil -sv /srv/store2 shows:
/srv/store2:
Indexing enabled.
Scan base time: 2011-08-22 15:53:26 +0100 (7954912 seconds ago), reasoning: 'scan required - shutdown side'
And I can see three mdworker processes running
$ ps ax | grep mdworker
299   ?? SN     0:00.35 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker -s mdworker -c MDSImporterWorker -m com.apple.mdworker.pool.0
341   ?? SN     0:00.41 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker -s mdworker -c MDSImporterWorker -m com.apple.mdworker.pool.0
634   ?? SN     0:00.43 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker -s mdworker -c MDSImporterWorker -m com.apple.mdworker.pool.1

Spotlight Cannot Find Files

Hi,
I have an encrypted disk image with some files in it. However, spotlight cannot find any of the files. Most are text files and I even placed tags in the Spotlight Comments section of the 'Get Info' popup. Any ideas how I can have spotlight find these files?
PS. Is it just me or did spotlight in Leopard get less powerful, in that there aren't as many custom filters to put on finding metadata. Plus it is a chore to specify if you only would like to search one folder.
Thanks
IP20

i'm having the same problem and my disk isn't even encrypted. since switching to leopard, spotlight has been a distaster. it worked fine in tiger, but i've repeatedly tried to find things that i know exist with no luck.
for example, i do a search on my local for files that i created called FAQ, nothing relevant comes up. i then look around myself and find the folder they are in, called FAQ, and do a search in that specific folder for files called 'FAQ'. i have two browser windows open, one with the search results, one with the actual folder. in the folder i see seven files with FAQ in the file name. in the search results window, with file name clicked, and that folder specified, it brings up only one of the seven files. other times it's come up with none, and i'm looking at the **** things sitting there. what gives? am i losing my mind?

I click a URL, General Failure, the system cannot find the file specified, then the site comes up.

If there is a URL on a site to go to for more information. When I click to go there, a window comes up with: General Failure, (repeats the site address) and says - The system cannot find the file specified.
Then the address I clicked on comes up after that window.

I tried opening Firefox before clicking on links in e-mail. and it works without that General Failure popping up.
Why should I need to open Firefox before my e-mail to stop a very annoying process? I never had this problem until I upgraded to Firefox 4.
Boy how I wish I could go back to the old Firefox because it was so much easier to use. Sometimes progress is not good!!!
I hope there is something that can be done to correct this problem.
Thanks for your response.

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

Error message when compiling book "file is corrupt" referring to a photo. Or "cannot find original photo". Can you use photos that have been "edited" out of "Book Mode"?

I did copy it to my desktop, but it still won't let me open it. I think the file on the disc might be corrupt or something like that though the cd itself checks out fine as far as viruses go. I was able to verify the disc, but that's about it. My husband tried it on his iMac and we have the same issue. It's unzipping the folder, but won't let us open the folder on both the Mac Book Pro or the iMac by double clicking, going to file/open or right clicking. It just keeps saying the same message as I posted above. I think I'm just going to have the client put the pictures on either a memory card or a USB memory stick so she won't have to compress the files for zipping purposes. It's been too frustrating trying to open this folder on this cd she gave me. She said she created/zipped the cd on her Mac Book Pro but it sure won't open on mine.

On every URL link in Microsoft Outlook I get the message that "The system cannot find the file specified." Then it proceeds to open it AFTER I close the error message. I just updated Firefox a few days ago and it began then and continues.

It shouldn't take any more detail than this. This is what happens every time:
"Generald failure: The URL was 'http: //link.washingtonpost.com/r.....' The file system cannot find the file specified."
'''EVERY URL'''

See:
* http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

App-v 4.6: cannot find the file specified

Hi,
Please see my previous
post.
In short: an application needs Internet Explorer activex, then a plugin for Excel. My App-v package is working (Internet Explorer opening), but the Excel plugin does not work. It says "cannot find the file specified".
I copied the excel shortcut from start menu to q:\packagename.
Please advise.
J.
Jan Hoedt
In .osd file of Excel plugin, there is the following:
    <CODEBASE HREF="RTSP://%SFT_SOFTGRIDSERVER%:554/WindowsX64/Application/1.0/excelplugin.sft" GUID="9FA88591-089E-4E57-89D5-C23239E83238" PARAMETERS="" FILENAME="%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12\EXCEL.EXE"
SYSGUARDFILE="applic.001\osguard.cp" SIZE="305879730"/>
       <WORKINGDIR>%CSIDL_PROGRAM_FILES%\Microsoft Office\Office12</WORKINGDIR>
The CSIDL_PROGRAM_FILES%, is that correct? If not, can I change it and how? Should I then reimport the package?
I might have found a solution but please advise:
http://blog.gridmetric.com/2011/09/26/possible-caveats-in-mixing-32-bit-and-64-bit-app-v-packages-and-environments/
Office is x86, so I probably should change the %CSIDL_Programfiles% to %programfiles(x86)%?

Changing CSIDL_PROGRAM_FILES to %programfiles(x86)% is worth a try.
A common reason for that 'cannot find the file..' error message also often can be resolved by removing the Workingdir entry (<WORKINGDIR></WORKINGDIR> or just <WORKINGDIR/>.
The way to apply the change depends on your deployment scenario. With an App-V Management Server (and for a test packae) you could modify (a copy of) the original .OSD file in the content share. Make sure you save with 'save as' and then 'Unicode'. Then
re-initiate a Server Refresh from the client, that should download the new OSD.
You also could - if it is permitted - create a copy of the client-local copy of the OSD file (you can figure that out with the Client Management Console). Double-Clicking that modified copy could do the trick.
If you use another deployment method (SCCM, MSI) you would need to moify the OSD file using the App-V Sequencer.
Whatever method you use during troubleshooting: For the 'final' pacage you should open the original package on the Sequencer ('Edit'), make the changes there and re-save + re-deploy the package. This makes sure that all information is consitent across the
various App-V files
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Photosmart C4780 install fails at "system cannot find specified file"

My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print. At first, the network connection checked out fine from the printer control panel. I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it. The first test page would not print, but the "inner test page" did print. I didn't understand whatever that meant, so I looked for help from the HP site.
I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver. I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK". The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared. What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end. What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
I found one topic on the same problem for the same model printer in the forum, which offered this fix:
You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
1. Press the Windows key, and the letter R
2. Type %temp%, and click OK
3. Open the 7z folder (most recent one if there are multiples)
4. Open the util folder
5. Open the ccc folder
6. Double click on the Uninstall_L3
Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future. Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
Do I need to uninstall both HP printers before I can reinstall one? And if I do that, is there any reason I would not be able to reinstall both printers? Sounds like I'm asking for trouble. Bottom line... I still cannot install the driver.
I have tried to install both the full and basic versions of the driver and always get the same result.
I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit. I haven't installed any new hardware or software. This printer has always had a wireless connection. The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV. I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
Please help! And thanks in advance for your time and attention.
This question was solved.
View Solution.

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Outlook 2010 - sending mail with attachment - "The system cannot find the file specified"

Hi forum Fellows,
I have the following failure scenario:
1. A user receives an e-mail with an attachment.
2. The user opens the attachment --> Forwards the mail and writes something in the body of the e-mail
3. For whatever reason the user leaves the e-mail and works on something else --> the user comes back to the e-mail an hour or more later.
4. The user then wants to send the e-mail but gets the following error message: "The system cannot find the file specified"
5. The effect is that the user cannot send the e-mail.....
------------------------------ TROUBLESHOOTING -----------------------
- I can see that when the user opens an attachment this attachment is saved in the OutlookTemp folder. Actually, there is a difference between opening the attachment before or after clicking forward on the e-mail.
---- Before: Two files is written to the OutlookTemp folder. For example if the attachment name is FileX.pdf - there will be a FileX.pdf but also a FileX (2).pdf in the folder (if OutlookTemp is empty/do not contain a file with the name FileX.pdf already)
---- After: Only one file is written to OutlookTemp. That is FileX.pdf
- Running Process Monitor when trying to forward the e-mail I can see that Outlook is calling a file that is not in the OutlookTemp folder anymore.
**** To me this is the heart of the issue. For some reason, when a user has an e-mail with an attachment open for an extended period of time (not sure on exactly how long is necessary), files in the OutlookTemp folder is deleted - files that Outlook is depending
on to be there.
- Going with a totally clean OutlookTemp folder does not help.
------------------ NOW WHAT ---------------
- The question now is: Is this by design? Can it be fixed by some Outlook 2010 patch? Or perhaps a group policy/registry setting as a workaround.
------------------------------ TECH. INFO -----------------------
Outlook 2010 v14.0.7132.5000
Outlook bit depth: x86
Running on a 2008R2 SP1 TS environment.
No antivirus on the TS
Looking forward to hear from you.
Regards The Red Baron
Red Baron

Hello Red Baron,
Although not a complete answer, the way to treat attachments in emails require some discipline:
1. Never open an attachment directly from the email (and NEVER edit it from there). Always save it in a known location as the desktop or (better) in a designated document folder. Then you can proceed as usual, like editing the contents, printing, forwarding
the new version etc.
2. Directly forwarding the attachment is ok, along with additional text in the body of the email.
3. Having any (unsaved) document open for several hours should
never occur. What if there is a power outage?
Bottom line is thus Discipline. This is regardless of Operating System (which might handle temporary files differently).
These are the rules I teach my customers and they never leave any document unsaved for hours ...
Best regards George

My ipad quit backing up and it cannot find the file. I tried putting on another computer after a hard reset but it says it cannot back up there either.

My ipad quit backing up because it cannot find the file. I have tried a restore and hard reset and adding itunes to another computer and putting it on there but it still will cannot add the ipad to the new computer and back up. I have an iPad (not iPad 2) and 5.01 OS. It appears that my iPad is not fully fuctional since I updated to the new OS which is when my ipad stopped backing up. I lost data too and some apps don't work anymore.

Have you previously synced photos to the iPad, as that occasionally causes the 'missing file' error. If so then try deleting the photo cache from your computer and then re-try backing up - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314.
In terms of apps not working, if it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

Spotlight cannot find Flv files then can

Similar Messages

Maybe you are looking for