Spotlight does not work with Thunderbird? mdimporter installed but no work

Hello,
additional to my Apple-Mail i still use Thunderbird for my old PC-Accounts and the old mails.
Thunderbird runs quite well, but the Mac-OS Spotlight does not find anything within the Mails stored in Thunderbird.
The mdimporter from Mozilla is installed,
I made reboots, re-Index, Double-Clicks, added the thunderbird-Folder to the private and removed again and everything else i could find anywhere.
Nothing works.
Anybody here who might give me a useful hint?
Kind regards
Falk

ok this is some extra piece of software which seems to create a separate index for Thunderbird emails outside of the database files which can then be searched by spotlight. I don't use it so can't comment on this directly. one obvious thing is that you'd have to include system files in your search before you see any results from the thunderbird folder because all this stuff lives inside your user Library. to include system files in a search start finder search using command+f, click on "kind" scroll and click on "other". in the resulting popup select 'system files' and change the settings to include them in the search.

Similar Messages

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Ical on iphone does not sync with ical on mac, but the mac does it!

My ical on my iphone does not sync with ical on mac using MobileMe, but reverse it works very well.
so typing an new event in ical on my phone will NOT appear in ical at my computer. Typing a new event on my mac, than within 10 seconds it appears on my phone.
anybody know how to resolve this? never had the problem before
problem 2: ical on my iphone seems to duplicate a lot of events. Non of them are duplicated on my computer.
related problem?
thank
Hein

I have solved my problem - don't know if yours is the same. I noticed on iPhone, when I listed the calendars there are two sections: the top line showed "All Calendars ->"; when I click on that I get duplicate entries for everything.
Below that is:
"From My Mac.
"All from My Mac ->", followed by a list of individual calendars. When I clicked on that I got single entries.
This led me to realize that in my Settings ->Accounts I had the old "...mac.com" a/c and new "..me.com" a/c. I had thought it didn't matter.
Once I eliminated the "mac.com" A/c, I had only one set of calendars.
Hope this helps you.
Val J

Satellite A660-11M: Does not start with 8GB of RAM, but works with 6GB

Satellite A660-11M:
I upgraded my RAM from 4GB (2x2GB) to 8GB (2x4GB). When I start the computer I can see in the BIOS it reads the 8GB of RAM. However, when it boots up, it does not go past the blank DOS screen (just before starting Windows).
If I remove one of the 4GB & replace with a 2GB (so I have 6GB in total) it starts ok.
Does anyone know how can I get it to work with 8GB of RAM?

Hey,
To be honest I never heard about SanMax RAM modules...
In my opinion the problems is related to your RAM modules Not compatible to your notebook or defective.
Can you test it with high quality modules from Kingston or pretested modules from an authorized service provider?

My iCal does not sync with my iphone . help. it worked fine in mobleme

My iCal does not sync between my iMac and iPhone consistantly. It worked fine with mobleme. Any solutions?

Make sure that your Mac is subscribed to iCloud and is logged on to the calendar, there is no 'sync' in iCloud, whatever MM did is irrelevant.

Historical Data Viewer does not show Alarms/Events after date but trace working.

Dear users
The DSC Historical Data Viewer no longer shows any Alarms or Events after 31/10/06 using Citadel 5 Universe. The trace still works to current time and you can search for the alarms by tag names in the trace and it works fine. Therefore the database data is there. Does the Alarms/Events View use a different file? Any help would be much appreciated as I'm a novice working with a predecessors project.
Please keep the answer simple.
Thanks
Dave

Hi Integrators,
Well I had drafted out a whole long post and it then died in me. Sometimes I hate windows... anyway...
http://digital.ni.com/public.nsf/websearch/A4F007F96AB1EB1E862569C30080C731?OpenDocument
Might help.. maybe someone has turned off the Alarm viewing?
http://digital.ni.com/public.nsf/websearch/E6611BC10294608886256A4800724210?OpenDocument
It may be a corrupt database.
The files you need to look at with all of the alarms in are files with the extensions "ale"
http://ae.natinst.com/operations/ae/public.nsf/web/searchinternal/6fc62f75b74d706d8625694900768f69?O...
This link will give you a bit more information as to which of the file extensions apply to which database files.
Hope this all helps. (I am also handeling your e-mail query into NIUK so feel free to e-mail me back)
I'll keep looking into the problem.
Post back if you need more help.
AdamB
Applications Engineering Team Leader | National Instruments | UK & Ireland

Two VGA monitors don't work with two different G4s, but both work with G3!

I recently acquired two used Power Mac G4s (one of them is a mirrored-door dual-processor that I got from school and was told should work, the other is a Gigabit Ethernet model, and should also work), from two completely different sources. They both turn on (I get a power-on light, I hear HDDs churning, and I get a power chime from one of them, and they react to the usual Mac stimuli, mouse and keyboard light up, reset button works, etc.) but I get *absolutely no video*. The monitor syncs for a second, like it gets a quick signal, then goes immediately back to the "CHECK SIGNAL CABLE" message.
I have tried them both with two generic PC VGA monitors (though they were both kind of old and crummy ones, they work on my G3 and other computers. I've tried the working PCI video card from my G3, that doesn't work, nor does swapping their video cards. They both have Apple-supplied ATI AGP video cards, both with Apple's proprietary ADC interface, though one has only DVI out (with a DVI to VGA adapter that came with it) and the other has a straight VGA port.
The weird thing is that, even though these computers have never, er, met before, they have the exact same problem. The only thing these things have in common is the monitor I'm using. This leads me to believe
The only thing left I can think of is to hook them straight from the DVI port to my HDTV, but I don't have a DVI cable, much less know ANYTHING about DVI. Could it be that these particular VGA monitors don't like AGP video cards, or some sort of weird incompatibility that isn't well known?
I figure if anyone's seen something like this, you guys have. Here are the AppleHistory entries on these machines, if it helps:
http://apple-history.com/body.php?page=gallery&model=g4giga&performa=off&sort=da te&order=ASC
http://apple-history.com/body.php?page=gallery&model=g4_mirror&performa=off&sort =date&order=ASC

The software on the hard drives may be set for a video setting that won't work with your monitor. A few things to try (in order):
1) Reset PRAM. Hold down Cmd-Option-P-R when booting until you hear the third Boing.
2) Hold down Option when booting. Should show symbol of hard drive, plus a couple of arrows.
3) Boot from a CD (Install disk or, preferably, Hardware Test Disk).
4) Safe boot. Hold down "S" just after the boing. Release it when (if?) you see the turning gear.
If it is a scan rate problem, one of these should show some video.

Windows 2008 R2 SP1 (64bit) shared folders no longer work with Windows 7 Pro but do work with WindowsXP & Windows 2003

As of last week, our Windows 7 Pro workstations can not map or browse the Windows 2008 Server shares. They can ping the Windows 2008 server. The Windows 7 Pro machines can still access the Windows 2003 Server Shares. The older workstations running Windows
XP can still map to the both the Windows 2003 & Windows 2008 Servers. All the servers can browse to each others shared folders (2 windows 2003 server & 1 windows 2008 server).

Ok, now you're down to network or permissions issues. An unedited ipconfig /all
of server and problem workstation may help. You could also try setting up some auditing.
https://technet.microsoft.com/en-us/library/dn311489.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

When I click on a .docx document Firefox thinks it is binary and saves but does not open with MS Word - but it knows .doc is MS Word and opens it automatically

When I click on a .docx document Firefox thinks it is binary and saves it but does not open with MS Word. But it knows .doc is MS Word and opens it automatically (this is the behavior I would like with .docx docs.) In preferences -- applications - it is just says "content type" is "microsoft word document" but doesn't give a way to choose .docx specifically. Is there another way to do this?
Iam running Mac OS X 10.6.4 and Firefox 3.6.8 with MS Word Mac 2008

Hi ,
According to your description, my understanding is that you could not edit documents with Office client application in SharePoint 2010.
Let’s do a troubleshooting about this issue:
1. Make sure that you have installed Office application on your machine.
2. Which explorer did you use for your SharePoint. Please test it with IE 10 32-bit, compare the result.
3. Please try to reset IE, compare the result.
4. Add your SharePoint site into Trusted site on your IE options.
5. Make sure all add-ons related to SharePoint are enable, special for SharePoint OpenDocument Class and SharePointOpenXMLDocuments.
6. Since you used OWA for your SharePoint site, please try to disable OWA, then open documents with client application, compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Cursor does not change with tool selection

Has anybody experienced this? My cursor suddenly does not change with the selection of tools when working on photos. Once I roll over the picture the arrow is lost and becomes a strange 3 small things, so can't do any work accurately. Still using PS 7 in Win 7. This was not a problem previously. Already uninstalled and reinstalled and problem is still there. I have searched for where this can be fixed. So far no luck. Any suggestions?

First answer, PS 7, not Elements. Second answer, BIG THANKS, the dpi change corrected the problem.
It was an odd issue as PS was working fine for years and then suddenly the problem occured, even though I had not changed the dpi recently.
A true glitch. Thanks again for the fix. Working fine again.

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

Spotlight does not work with my Lacie d2 drive connected.

I, like many others, have been struggling with the case of Spotlight shannigans for some time since it stopped working smoothly on the release of 10.4.8, I think. Anyway no amount of privacy setting, re-indexing, SystemUI force quitting or crying seemed ti fix the problem. Then - in a trial and error experiment the likes of which I had never undertaken before - I found the culprit. Spotlight does not work when my Lacie d2 Extreme 200GB is connected. No matter if it is connected by USB, Firewire or Daisychained - as soon as the computer sees it is plugged in - Spotlight (and all other search functions) dies.
Thinking it was simply a case of fixing something on the drive, I updated the firmware, completely deleted and repaired the disk and thought it would start afresh. Unfortunately this was not the case - so now I have to decide between having Spotlight working, or having my external drive connected.
Does anyone have any ideas at all of what else I could try to do?

Hi there - I've reformatted it twice, once as OSX Extended, and Once as OSX Extended Journalled. Neither really made much difference. As a quick work around, I managed to add it to the privacy list before the computer had a chance to index it - so far so good, but I can't search the drive. Better that than the alternative though! The only other weird thing was it did work straight out of the box with no problems for almost 3 years - it was just the move to the New iMac and an update or two that started the snafu.

HT1296 i changed my laptop and install a new itunes on it, the usual basic i authorized my new laptop and downlad applications on it but my i tunes does not sync with my ipod i alreadt reinstall and downloaded all the application still it does not work pl

i changed my laptop and install a new itunes on it, the usual basic i authorized my new laptop and downlad applications on it but my i tunes does not sync with my ipod i alreadt reinstall and downloaded all the application still it does not work please me...tnx

anyone please help!!!tnx

In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

MacBook Pro (Retina, 15-inch, Late 2013)
2,6 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 2048 MB
OS Yosemite,
Finder versión 10.10.1
Mail Versión 8.1 (1993)
In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Spotlight does not find files with "_" (underscores), but only for certain file types

Hey Folks,
this is strange, maybe someone has an idea.
I already searched the internet for a while, nothing found so far.
I have a file "calc_mean.m" on my desktop.
When I type "calc" in spotlight, it shows the file.
But when I type "calc_" it suddenly does not show the file anymore. Nor does find the file, when I enter "calc_mean.m" in spotlight.
When I enter "calc mean.m" in spotlight, it finds it (using space instead of the underscore).
Now comes the real surprise:
When I rename the file to "calc_mean.txt", spotlight suddenly DOES find the file when entering "calc_mean.txt".
I recreated this "feature" with other files, copying and renaming ".txt" files to ".m" files, and if there's a underscore in the file, spotlight wont find it.
Playing around a bit more, it seems spotlight does find files with underscore when they are documents, at least it works for the following extensions:
.pdf
.doc
.txt
.xls
But these extensions for example do not work:
.mp3
.m
.k
.a
.ka
(and other random endings I tried).
I am pretty confused. Sure it's no big deal learning to search for files that include underscores in their name using space instead. But I'm still quite puzzled. Any idea?

All of those have meaning in various database search syntax (not sure if it matters).
_ usually means any character.
% usually means any run of characters.
- is often used to negate what comes next, i.e. "don't include results that have the following text."
I don't see any problem on my Mac, though.
I also don't have any problem finding file names with those accented characters using Spotlight. I would suggest reindexing Spotlight, but if cmd-f finds them, I'm not sure that would help.
Spotlight: How to re-index folders or volumes

Spotlight does not work with Thunderbird? mdimporter installed but no work

Similar Messages

Maybe you are looking for