Spotlight - how to find RTF files with the query language (kMDItemKind,etc)

Hi folks. I'm trying to come up with a string that will find all RTF files.
There are many strings for other docs -- like Microsoft Word is
kMDItemContentType == "com.microsoft.word.doc"
But I am trying to create one that will find all RTF files. There doesn't seem to be a kMDItem command for extension or anything, and if I type "com.nisus.writer" I'd just be guessing. And I only want to include RTF files.
I'm probably missing something obvious, but I'm a complete non-programmer (obviously).
Thanks.

That's a partial solution, but it would be very helpful if one could somehow get the pathname onto the clipboard.  Being able to see the pathname is a lot less useful than being able to use it.

Similar Messages

  • How to open a file with the extension x3f (sigma)

    how to open a file with the extension x3f (sigma)?

    RAW data from the following Sigma cameras is currently supported:
    DP1
    DP1s
    DP2
    SD9
    SD10
    SD14
    If your camera is among these, then simply import the photo as usual. https://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html

  • HT1529 how to find my iphone with the serial number

    hi
    could you please tell how to find my iphone with the serial number ?

    Sorry, there is no way to do that.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0

  • How to put two files with the same name into the same folder?

    How can I put two files with the same name and the same extention into the same directory?
    Is this even possible?
    Thanks in advance. 

    Are you sure? I would be very surprised if that was the case.
    How does the computer/filing system differentiate the files, if not by their names?
    How do you tell the computer which one you want? (On the command line.)

  • How to open a file with the same name?

    Hi, now I practicing making web pages where I put sample codes in one directory and I copy them to edit.
    The probrem is, I couldn't open one file while I'm opening another file with the same name.
    Is it possible to open  a file with the same name in Dreamweaver?

    That could be a very error prone practice.
    May I suggest you take advantage of DW "Snippets" feature instead.
    Simply save any blocks of code you will reuse regularly as snippets,
    and give each one a descriptive name you like.
    Then you can simply place your cursor in code view where you wish the code,
    and click insert on the selected item from the snippet panel.

  • How to find who has deleted the query in Production system

    I Experts,
    I have an issue. Someone has deleted one query in Production system.
    How can i find who has deleted the query??
    I searched the ans for the same i the below threads :-
    Query deleted in production
    How to find out who has deleted the production Query
    But it didn't help me as i couldn't understand how to use the transaction SLG1.. Can Someone please explain me how can i find out who has deleted the Query..
    Regards,
    Pavan Raj

    Hello,
    Please, remember the date on which date the query has seen last time  in the production server. You can use the last date in the From date and To date would be current  date and execute the SLG1 tcode. It would list you all the logs in the Object text you can search for BEX Query designer and sub object text column you can check for delete logs options.
    Double click on the object will list you the query and name. From the user column you can find who has deleted the query.
    Might be this can help you for analysis.
    Thanks
    Geeta Sharma

  • TS1362 My iTunes has stopped playing - it will not progress. I have updated iTunes, and can't figure out how to find any plug-ins - can't figure out how to find hidden files on the iMac Finder.

    How do I find hidden files on my iMac? My iTunes has stopped playing music and videos - the playbar does not progress, and it may be that there is a plug-in that is stopping it. How do I fix it?

    Well, it sort of solved my problem. Now every time I start a lecture with sound, there is no sound, but the slides advance. If I go back to iTunes and turn on a cd, it plays the sound. If I then go back to the lecture, the sound goes on. So each time I start a slide show with sound, I have to turn on iTunes. How can I fix this?

  • How to reference a file with the XML Forms Builder?

    Hello,
    I've created a form at the XML Form builder (I am using NW 04). This enables the users to create new topic.
    I've created at at the "Edit" form an option to upload a file along with the new topic. The file is being saved in a subfolder of the topics main folder.
    My question is how to create a link to the specific file that has been uploaded with it's specific topic at the "Show" Form? Note that the subfolder contains files of many topics, I want to link to this specific file uploaded with it's relevant topic when created. How do I do that?

    Hi Roy,
    > I've created at the "Edit" form an option
    > to upload a file along with the new topic.
    What I expect that you have done is to add a browse functionality which browses within KM with the possibility to upload an image into KM?! As done within SAP Demo News?!
    If that's the way, just compare the SAP Demo News: Create /DataSchema/News/image and map it to the browser, whereas in the show form part you'll map it to an image.
    If I didn't understand you right and the issue is still open, please report...
    Hope it helps
    Detlev

  • How to open a file with the assosiate program on suse????

    i came to know that we can open a file with assosiated program on windows using "cmd /c start filename".
    and i want the same functionality on suse linux.
    in forums i found that "kfm filename" will do fine on linux.
    i tried it on suse but no use at all.
    i would appretiate the quick response and i would be very thankful
    for the same.
    Thanks alot in advance.

    take a look at java.awt.Desktop in the JDK SE 6 http://java.sun.com/javase/6/docs/api/java/awt/Desktop.html.
    See these two methods:
    - void edit(File file)
    - void open(File file)

  • How to find login user with the largest account

    Hello. I'm looking to put together a bash script that can do two things: (1) determine the shortname of the user with the largest account in /Users and (2) look up their full/long name. I'm going to use this script to help identify who the user on a computer and while I know that's possible that a sometime-user may have a larger account than the normal-user on any given computer, the results of a script should be sufficient in most cases for my needs.
    I'm not sure the best way to around this. I know that I can use "du -m -d1 /Users" as root:
    root on torchwood
    [ ~ ]$ du -m -d1 /Users
    157 /Users/admin
    128 /Users/johndoe
    70890 /Users/dancollins
    21746 /Users/Shared
    92920 /Users
    I know that I can also use "dscacheutil -q user" to get a full list of all users on a system.
    How can I get both the short and long name of the user with the largest account in the /Users folder?

    We're running JAMF Recon for inventory and my supervisor wants to create a report that lists the primary user of the Mac... assuming that the largest user account may be the primary user. In this case, disk space is not the issue, the top admins simply would like to be able to associate names with individual machines. This isn't the most elegant way to do it and it's not fool-proof, but it'll be correct more often than not, which they're satisfied with.
    Can I ask one more question? Using your script, I've started testing with one building and on a number of Mac, the "admin" (shortname) account is turning out to be the largest account. Is there a way to exclude the admin account from consideration?
    Thanks...

  • How to attach HLP file with the existing forms

    We have FORMS 5.0 application running. We have developed .HLP and .CNT files using ROBOHELP utility. I would like to attach the help file to the existing form. I want to use the registry to set the help file path so that I won't hardcode the path. I tried
    using WINHLP32.exe file using the HOST command. This need path settings in the machine. Does any body know other methods instead of using HOST command.
    Thanks in advance.
    Bye
    Meenakshi Sundaram Ganesh

    You could use the d2kwutil.pll and execute the Win_api_shell.Winhelp procedure

  • How to find System date in the query

    Hi,
    I have requirement where in the query I need to select the Document delivery date = today's date or system date.
    Can any once please let me know how to write the query?
    Murali

    Select * from ORDR where docduedate=convert(char(8), getdate(), 112)

  • How to find an EXIT with the Include name ?

    Hi everybody
    If i have an Include name (like ZXMLUU16) , how can i find the FM Exit or the program where this include is used ?
    (NOTE: If i use SE38 and 'Where used' option , this
           only tell me 'Include ZXMLUU16 not found in
           selected search area')
    Thanks
    Frank

    I don't think there is a way to find that out, particularly if the include is not yet created. Typical with function module user exits is that, even though you see the line INCLUDE ZXMLUU16 statement in the function module code, the include itself is not created yet. Only when you double click, you will be creating it and then your 'where-used' should work.
    You just have to go by a hunch based on the name itself. Unn is a typical naming convension used for function module includes. So, I will take a wild guess that this include is in a function module that is in the function group XMLU. So if you look at this program SAPLXMLU and do a 'Find' 'In main program', you will see that the statement is in EXIT_SAPLMLSP_030.

  • How to open PDF file with the view I wish without many clicks

    I am getting many many scanned files daily and I'd like to able to skim thru each file as fast as possible.
    Since the way each file scanned is consistent, when I open it, I am clicking a button to rotate it counterclock, then click zoom-in a few times to be able to read the top portion to see if the file is of my interest.
    Can we customize the way the files are opened?  I wish that once I open it, it will be rotated (so that I don't have to tilt head to read it), and zoom in big enough for me to read it.
    I did try (I am new to this) "accessabitly settup assistant", but couldn't achieve my desired effect.
    Any suggestions?
    thanks.
    JQ

    Thank you for the suggestions. Appreciated it.
    Actually when I asked whether they could scan it differently, I was told "no" for that type of scanner they have, and they have been reading it the same way as I just start to do, for years.
    Maybe someone knows about what scanners have the feature to do these tricks?
    I tried the preference setting. It's still less manageable. However, I manage to be able to click 3 buttons to get to the top portion to be readable.
    First, I rotate it counterclock (which mess up the view zoom in setting preference).
    Then I click to "show one page" button;
    Then I clcik to make the document to fill the width. (at this point, the zoom in is about 79%).

  • How to find a data with the minimum value I get without using sub query

    Currently, I manage to get a record by using subquery to find the minimum number, eg:
    SELECT TAccTrn.ASysCde
    FROM TAccTrn
    WHERE TAccTrn.AAccTrnNum=(SELECT Min(TAccTrn.AAccTrnNum)
    FROM TAccTrn, TDbtSchCltDtl
    WHERE TDbtSchCltDtl.ASrcRefId=TAccTrn.ASrcRefId
    AND TDbtSchCltDtl.ASrcRefSubId=TAccTrn.ASrcRefSubId
    AND TDbtSchCltDtl.ASrcRefSeq=TAccTrn.ASrcRefSeq)
    Is there any more idea without using the subquery?

    Hi ,
    What about using an in-line view and the row_number () analytic function...????
    Here is an example....
    SQL> select * from emp;
    EMPNO ENAME      JOB         MGR HIREDATE          SAL      COMM DEPTNO
    7369 SMITH      CLERK      7902 18/12/1980     800,00               20
    7499 ALLEN      SALESMAN   7698 20/02/1981    1600,00    300,00     30
    7521 WARD       SALESMAN   7698 22/02/1981    1250,00    500,00     30
    7566 JONES      MANAGER    7839 02/04/1981    2975,00               20
    7654 MARTIN     SALESMAN   7698 28/09/1981    1250,00   1400,00     30
    7698 BLAKE      MANAGER    7839 01/05/1981    2850,00               30
    7782 CLARK      MANAGER    7839 09/06/1981    2450,00               10
    7788 SCOTT      ANALYST    7566 18/04/1987    3000,00               20
    7839 KING       PRESIDENT       17/11/1981    5000,00               10
    7844 TURNER     SALESMAN   7698 08/09/1981    1500,00      0,00     30
    7876 ADAMS      CLERK      7788 21/05/1987    1100,00               20
    7900 JAMES      CLERK      7698 03/12/1981     950,00               30
    7902 FORD       ANALYST    7566 03/12/1981    3000,00               20
    7934 MILLER     CLERK      7782 23/01/1982    1300,00               10
    14 rows selectedUsing a solution like the one you don't want ...(a subquery) i would write....
    SQL> select ename from emp
      2    where hiredate=(select min(hiredate) from emp)
      3  /
    ENAME
    SMITHWhereas , using an in-line view....
    SQL> select ename from
      2   (
      3    select ename,row_number() over(order by hiredate asc) row_num from emp
      4    )
      5  where row_num=1
      6  /
    ENAME
    SMITHIs it acceptable...????
    Regards,
    Simon

Maybe you are looking for

  • Please help, Iphoto crashes when trying to update my iphoto library

    i recently upgraded my operating system to Lion OS x 10.7.3, and I bought the IPhoto 11' (9.2.1) from the app store. Now it crashes when I try to open after telling me it needs to update my library (version 8.1.2). It starts updating, but then crashe

  • How can I decreaes a file size?

    I created a form using Adobe LiveCycle Designer and saved it as an Acrobat 7 (Static) PDF Form (*.pdf). Once saved, I open the PDF and enable rights for Adobe Reader users. This fillable form I created is 707 KB. Any suggestions on how I could decrea

  • L_TO_CONFIRM - parcel tracking data

    Hi All, I 'm using a scan transaction to scan a transfer order and confirm it. Before confirming the Transfer order I can see the parcel tracking data in the delivery header but once I confirm the transfer order using L_TO_CONFIRM I cannot find the p

  • Mac OS X 10.7.3 Lion

    Hi Where can I get a copy of this Software ? I lost my copy. I used to download it from Apple Store but now is not there . Thanks

  • Files Open as Smart Objects

    I am in the process of trying to get better with CS5. For some reason, all my files seem to open as Smart Objects. When the file opens, it is a RAW file, there is no 'lock' on the background layer. How do I get a file to open in a 'normal' way. Thank