Spotlight icons is burning my screen

Is there anything that I can that do...I mean it's always there and yes I have a screen saver. Any thoughts or ideas.
PowerBook G4 Mac OS X (10.4.8) 1 gig of ram

Draining the battery was a mistake.  Does the MBP charge?  Perform SMC ansd PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Try a safe boot:
http://support.apple.com/kb/HT1564
If no success, take the original install dusk and insert it into the DVD drive and boot the MBP with the C key down as if you were reinstalling the OSX.
Proceed with the directions UNTIL you see a menu bar on top of the display.
Select UTILITIES from the menu bar.
From the drop down menu, select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
What are the results?
Ciao.

Similar Messages

  • Blinking notification icon/spotlight icon  in top right screen menu

    I have an issue in the top of the finder window.  I have a blinking notification icon/spotlight icon  in top right screen menu. I am not able to click on the notification icon and change any settings.

    Same thing occurs after restart.  It will not occur under guest login?  Is there preference I can  trash?

  • Spotlight icon is messed up.

    Hi. The spotlight icon that appears in the upper right corner of my screen is messed up. It's just a circle, but the "handle" has disappeared. Does anyone know where those graphics are stored on the system? It's a minor glitch, but it bothers me. If I can find the location of the graphic, I'll just copy it from another Mac and put it on my system. Any help would be appreciated.

    Problem resolved. I don't honestly remember what fixed it. I just noticed that this was still marked as "not answered" and I wanted to close it out.

  • Computers (G5Towers & G5 Imacs) booting up to Spotlight Icon only

    We have been having an issue lately where the computers seem to boot up normally until after the login screen. Then, all we get is the spotlight icon. We can then safe boot the machine and everything will come up normally. We have been runnig YASU on the affected machines when it happens and that seems to correct the problem for a day or so. Then it does it again. It doesn't do it on all our machines (we have a mixture of G5 towers and G5 Imacs). Is this a cache problem and if so, is there a way to set the OS to purge the offending cache before it causes the problem? Thanks in advance for any help you might be able to provide.

    Hi, mraftis. Welcome to the Discussions.
    If the Macs in question startup normally in Safe Mode, but not otherwise, this implies a problematic Startup or Login Item. See my "Troubleshooting Startup and Login Items" FAQ for steps that might help you with this problem.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Only Spotlight Icon loads with 10.4.5

    Hi There,
    I upgraded to 10.4.5 earlier today, and since my Mac is just refusing to work properly!
    When I try to load as normal, just my desktop background and the small spotlight icon appear.
    I have tried starting up in Safe Mode, but when the screen changes to the blue background and the "Starting Operation System" dialog appears, the computer just turns off!
    I have repaired permissions, this didnt fix it, I have ran the thorough Hardware test with no faults.
    But when I chose "Verify Disk" in Disk Utility, I do get the error: "The underlying task reported failure on exit".
    As far as I can tell at the moment, my only option is to re-install Tiger, will this delete all my files or just install the require system files?
    Help!
    Thanks, Tom!

    Hi, Tom. Welcome to the Discussions.
    1. You wrote: "... when I chose "Verify Disk" in Disk Utility, I do get the error: "The underlying task reported failure on exit"."
    1.1. Did you try starting up from your Tiger install disc and running Disk Utility > Repair Disk? For step-by-step instructions, see Step 1 of my "Resolving Disk, Permission, and Cache Corruption" FAQ.
    1.2. Have you checked the SMART diagnostics of your hard drive? See: "Disk Utility 10.5 Help: Checking the S.M.A.R.T. status of your hard disk."
    1.3. See "Disk Utility reports "Underlying task reported failure" when repairing a volume."
    2. You wrote:"my only option is to re-install Tiger, will this delete all my files or just install the require system files?"That may not help if the hard drive itself has gone bad, per the results from point 1.2 above and what the document linked in point 1.3 implies given the results you reported from Verify Disk.
    If your hard drive has failed or is failing, your first order of business is to backup whatever you can.
    Have you implemented a comprehensive backup and recovery solution? If so, backup your startup disk. If not, see "Mac OS X: How to Back Up and Restore Your Files" for an emergency backup procedure.
    Reinstalling via the "Archive and Install" method won't delete all your files provided you select the correct options. See my "General advice on performing an Archive and Install" FAQ. However, performing an Archive and Install on a failed or failing hard drive won't help.
    Once you recover your Mac from this problem, I recommend you implement a comprehensive backup and recovery solution. For advice on the backup and recovery solution I use, see my "Backup and Recovery" FAQ.
    3. Another thing to consider: If my suggestion in point 1.1 enables you to startup in Safe Mode, and points 1.2 and 1.3 are AOK, see my "Troubleshooting Startup and Login Items" FAQ. Sometimes incompatible Startup or Login Items can cause issues after Mac OS X Updates.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • How can I move an icon/file from one screen of my ipad to another?

    How can I move an icon/file from one screen on my ipad to another?

    Press and hold the icon until they start to wiggle. Then while holding it, drag it to the edge of the screen and wait for the page to switch, then let go of the app

  • The sync icon is constantly on-screen and battery is draining really quickly.

    The sync icon is constantly on-screen and my battery is draining really quickly. I can stop it by re-starting the iPhone, but is this a known problem? The sync and iCloud seem to be working properly, but I can see the battery drop by about 1% every minute.
    Sync is taking place over wireless, but even if I sync using the cable, the icon remains on-screen even when iTunes tells me that the sync is complete.

    Yes, iOS4, latest and a 3GS.
    So, with the home button double-tap, those two apps aren't showing in the recents list?
    Nope, not showing: http://d.pr/CQnR
    paulcb wrote:
    Did you reset like this?... press the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Did that as well, still the problem remains.
    I don't know if I should really bother but I just find it weird and I think it has a slight impact on the battery time.

  • How do you add a new icon to the home screen?

    How do you add a new icon to the home screen?

    The only new icons you can add to your home screen are webclips, which can be added by using the "+" button in safari on the desired web page.
    You won't be able to add new apps until February when the SDK is fully seeded to developers.

  • An app will not completely download from the App Store to my iPhone 5S. Neither can I terminate the download by trying to delete it. The app is useless to me and so I would like to remove the icon from my home screen. How can I do this?

    I tried to download the app "Google Translate" from the App Store onto my iPhone 5s. However, the download will not complete. As well, when I try to delete the icon from my home screen, it will not go away.  I am very frustrated as this has never happened before and I have gotten many paid and free apps from the App Store. I hope someone can solve my dilemma.  Thank you kindly.

    What have you tried to get the app to finish downloading e.g. have you tried logging out and back into your account on your phone, disconnecting and reconnecting to your network, soft-reset of your phone (press and hold both the sleep and home buttons for about 10 to 15 seconds, ignore the red slider, after which the Apple logo should appear and it should reboot) ?
    You could also try downloading the update on your computer's iTunes and see if you can sync it over to your phone (or delete the app its Apps tab when connected to your computer's iTunes and sync the new version - deleting the app will delete its contents).

  • HT4061 My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen.

    My iPhone prompted me to download the latest version of iOS7. I did, and now my phone won't power on. It just shows an iTunes icon on a black screen. When I connect my phone to iTunes on my laptop, the only option it gives me is to restore my phone's factory settings. But won't this erase all my photos, contacts, etc? Any suggestions?

    It's in recovery mode. You don't have a choice. You have to restore the phone. Anything that was on it is already gone.
    If you've been backing up/syncing on a regular basis, you won't lose anything except what's changed since the last backup.

  • How do you create Document Icons on the Home Screen?

    I have an iPad to use exclusively in the kitchen and would like to make my recipes appear as indivdual icons on the home screens with an associated picture.
    For example; Pumpkin Soup
    I would like to create an icon with a picture of pumpkin soup and the same as a title.
    When you tap the Pumpkin Soup icon a page appears with instructions and perhaps a picture or two.
    So my question is: What are my options for creating these stand-alone icons that bring up a page that describes a recipe/document.
    I understand that there are many 'recipe' apps avaliable, but none that I've encountered have the ability to save individual recipes as icons on the home screen.
    I dont care whether I use a recipe app or some other processing/publishing app to achieve this.
    I would very much like the recipe/document to appear on screen crisp and clear without program formatting around it.
    Any help would be greatly appreciated.
    Thank you in advance.

    I'm aware of the Safari shortcut, but was hoping there was a document, etc shortcut.
    Thank you for your reply James Ward4

  • TS1424 Downloaded a music video to my ipad2  When I pressed the video icon on the home screen it just went to a black screen. Can anyone help. Thank You

    What do I do when the video icon on the home screen on a ipad2 is pressed it gives me a black screen. Thank You Chris

    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Resetting the System Management Controller
    --  Those links are currently down for maintenance but should available shortly.

  • I was asked to download the iOS on my ipad3 which then completed automatically but instead iTune with a plug-in icon came on the screen. SInce then I can't operate the ipad even after I switch it off and on again. The icon just monopolize the screen.

    I was asked to download iOS on my ipad3 which the completed automatically but instead iTune with a plug-in icon came up on the screen. SInce then I can't operate the ipad3 even after I switch off and on again. That icon just monopolize the screen ! What shall I do now? Please help.

    Try and put your iPad in recovery mode
    http://support.apple.com/kb/ht1808

  • How to disable the print icon on check status screen of shopping cart inSRM

    Hi Experts,
    I have a requirment in which I need to disable print Icon on the status screen of the shopping cart.
    Can anybody please let me know how to achive this requirement.
    Thanks,
    Arun K Singarapu

    Hi Here you go some useful code for the requirement.
    wafunc = 'BWD'.
          APPEND wafunc TO functab.
          wafunc = 'FWD'.
          APPEND wafunc TO functab.
          wafunc = 'DIS'.
          APPEND wafunc TO functab.
          wafunc = 'COP'.
          APPEND wafunc TO functab.
          wafunc = 'IGN'.
          APPEND wafunc TO functab.
          wafunc = 'SAVE'.
          APPEND wafunc TO functab.
          wafunc = 'HIS'.
          APPEND wafunc TO functab.
          wafunc = 'CONTACT'.
          APPEND wafunc TO functab.
         SET PF-STATUS 'OBJECT_SEL' EXCLUDING functab.
    Bala.M

  • TS1367 My MacBook air has a blinking file folder icon on a blank screen with a ? In the center of the icon. I've tried turning on and off three times but it hasn't helped.  Any suggestions?

    My MacBook Air has a blinking file folder icon on a blank screen with a ? In the middle of the icon. I've tried turning my computer off and on three times with no luck.  Any recommendations on how to fix the problem? 

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for

  • Pre-installed Acrobat 9 Standard on Dell PC with Vista

    My pre-installed Adobe Acrobat 9 Standard has lost its PDF Maker files when trying to create a PDF file from a Word file (Even the Acrobat tab in Word 2007 has dissappeared).  Still works with Excel files however. I tried to Repair using installation

  • I can't change Download Location, or Save pages/images..."Browse" dialog will not show.

    If I go into Options, and click "Browse" to change the Download location, nothing happens. I have used Firefox for many years and have never had this problem. I just did a clean install of Win7 (wiped entire HDD), and the problem started when I insta

  • MRJ/Swing, I know the solution, can't find the answer!!!!

    Hi I am trying to use SWING on MRJ 2.2, I know this is a popular question and that the MRJ does not come with SWING and I need to install the standalone SWING libraries. Which is all well and good, until I try to find them! I have found JFC 1.1.1 whi

  • Performance Problem on ODS Activate

    Hello, I've got a performance problem when I activate an ODS. In the ODS Activation log, I can see that there is a very long time between the end of the calcul of statistics and the next Line. Log example : 14:42:03 Job lancé ..."SQL Request for calc

  • NI-VISA step by step configuration under linux

    Hi! I need to connect and acquire a codebar reader connected to RS232. I have: P4 2.4GHz with PCI6023E, mdk 9.1, LV 6.1 comedi, nicvirte and nivisaserver - nivisa drivers correctly installed and running. Serials RS232 are named ttyS00 and ttyS01 unde