Spotlight issue! mdutil -i -on not working

hi there,
i have a serious spotlight issue:
all my drives/partitions beside the startup volume are not indexed/searchable
when i check with mdutil -s it tells me "indexing disabled"
however if try mdutil -i -on /Volumes/the_disk t does not work
also mdutil -a -i on does not enable indexing.
and yes, i ran the commands as su.
what is going on and more importantly:
wtfigo?

hey e.blofeld!
i have the same problem (since weeks) and no idea how to solve it.
i hope you could solve the spotlight issue. if yes, please let me know how, because it makes me nuts.
greets

Similar Messages

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

BPEl Human Activity Issue - Reject case is not working

Hi All,
I have bpel processs. It is works like this:
It has a human task for approval from manager with ACCEPT or REJECT as outcomes.
Once the manager Accepts the request, the initiator (say applicant) should get a email updating the status as accepted.
And when the request is rejected by manager, then the initiator(say applicant) should get an email updating the status.
The problem is the human activity is working fine for ACCEPT and sending email. But struck up for REJECT outcome. It is waiting for task completion from manager, i mean completion of human activity even though it is completed as the manager rejected it.
Audit activity log when Human activity got REJECTed by manager:
*"waiting for "onTaskCompleted" from "TaskService". Asynchronous callback"*
I tried the below things.
1) Deleted the task form --> saved the process --> closed Jdev --Re-opened JDev and created a new task form. Still the same behavior. Not working for REJECT case.
Can some body help me in figuring out the issue.
I am using SOA suite 10.1.3.1 n JDev 10.1.3.1
Thanks,

Hi,
I could figure out the solution to the problem.
The issue was with xquery. I build it wrongly. I could find this from my domain logs.Then I corrected the query. Now it is working fine.
Thanks,
Irfan khan

Apache and Jserv issues - AppsLogin and AppsLocalLogin not working

Hi,
I am trying to understand the Apache and Jserv issues
Home page - http://11i-tst-02.cisco.com:38901 - working fine
This confirms that Apache core module is working fine. Does this confirm about the pls module also ?
Apps local login - http://11i-tst-02.cisco.com:38901/OA_HTML/AppsLocalLogin.jsp - throwing Java Exception
Request URI:/OA_HTML/AppsLocalLogin.jsp
Exception:
java.lang.NoClassDefFoundError
at oracle.apps.fnd.sso.SSOManager.getAppsServletAgent(SSOManager.java:1727)
at oracle.apps.fnd.sso.SSOManager.getLoginUrl(SSOManager.java:316)
at oa_html._AppsLocalLogin._jspService(_AppsLocalLogin.java:410)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
at oracle.jsp.JspServlet.service(JspServlet.java:148)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:479)
Is it related to SSO ? Because error mentions about SSOManager
But why does AppsLocalLogin need to go thru SSO ?
Doesn it mean Jserv issues ? I am able to see same message logged in jvm logs ?
Restarting Apache doesnt help
Servlet login - http://11i-tst-02.cisco.com:38901/oa_servlets/AppsLogin - throws Internal Server Erorr
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Apache log doesnt show any error
Servlet test works - http://11i-tst-02.cisco.com:38901/servlets/Hello
Example Apache JServ Servlet
Congratulations, ApacheJServ 1.1 is working!
OAM works - http://11i-tst-02.cisco.com:38901/servlets/weboam/oam/oamLogin - Navigating to SSO page for authentication
AOL test works - http://11i-tst-02.cisco.com:38901/OA_HTML/jsp/fnd/aoljtest.jsp
FND_WEB.PING works - http://11i-tst-02.cisco.com:38901/pls/QTCSTG/FND_WEB.PING
Connection test works - http://11i-tst-02.cisco.com:38901/servlets/oracle.apps.icx.common.ConnectionTest
So, my question is why AppsLogin and AppsLocalLogin are not working - if servlets / AOL / FND / OAM links are working
Is there issue with Jserv ?
Can someone please explain the significance of the above tests
And which tests need to pass for AppsLogin and AppsLocalLogin to work
Thanks

Since all the tests work fine as you stated above, I suggest you do the following:
- Rerun Autoconfig on all tiers
- rm -rf $OA_HTML/_pages
- Bounce Apache

SP 19 upgrade issue : Log off Button not working in Portal Masthead

Hi All,
We have recently performed an upgrade from EP 7.0 SP12 to EP 7.0 SP19 stack level.
After the upgrade we are facing these 2 issues:
1) Log off button is not working in Portal Masthead
2) SSO to BW reports also not working.
Any immediate pointers and help is highly appreciable.
Regards,
Shailesh

Hi Tobias,
Thanks for the reply.
I have tried rebuilding and redloying the par file after removing the function "'releaseProducerSessions()' " which is not available in SP 19..but still the issue persists.
Any other process to be followed?
2) SSO is working for other stuff, and the issue is specifically for Bex iViews/Reports
Regards,
Shailesh

Issue in Integrated Microphone not working in Hp DV6 laptop.

Hi,
I have the Hp Dv6 Laptop and its microphone is not working. Can anybody help me here in this issue. Any help appreciated.
Details of my laptop->
Product Name: HP Pavilion dv6 Notebook pc
Product number: QJ912AV#ABA
Thanks

Hi @RupaliNegi ,
Thank you for visiting the HP Support Forums.I needed to edit your post and remove the Serial Number . From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Spotlight Search in Mail does not work.

I use Spotlight in Mail every day... all day. About an hour ago it just decided to stop working. Contacts, subjects, nothing returns any search results.
I have restarted, done all system updates, and repaired disk permissions. Still nothing.
Any ideas?
Using Mail on Mountain Lion.

If you have more than one user account, these instructions must be carried out as an administrator.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender mdworker -o -k Sender mds | grep -v 'boxd\|Norm' | tail | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Weird Issues when Internet Connection not working

I hope I'm posting this in the correct forum.
This morning, my internet connection was not working (a common issue, whatever it is that requires me to restart my router. Tubes clogged, etc etc. I could ping it, but not get out). Anyways, before I restarted the router and restored internet connectivity, my machine took forever to boot and start X. During boot, it would hang at starting the CUPS daemon for a good 20-30 seconds. Then, it would eventually start and the machine would boot to agetty. I could log in fine, but when I typed 'startx' the machine would do nothing for about 5 seconds, and then X would start as per usual. Note that after issuing the startx command I got no output at all to stdout until after the delay.
Question: Why did this happen? My best guess is that on these occasions the machine was trying to connect to the outside world, and it was only after a network timeout that things went ahead as usual. But, that hardly makes any sense to me, for a couple of reasons. Why would CUPS and startx try to connect to the outside? The lag in starting CUPS was considerably longer than when issuing startx. The lag for startx did not seem long enough for a timeout. Weird. Any clarification would be helpful.
Last edited by hbarnwheeler (2009-04-13 14:26:25)

It might something wrong with the IP addressing you used when you statically set the configuration or traffic from the IP address you used is denied.
As you already have an IP config that works (Run ipconfig /all to get it) then you can simply proceed using one of these ways:
On your DHCP level, do a reservation of the IP address so that it will always be allocated to your server
or on your DHCP level, exclude the IP address of the server and set it manually on the server
More information if you contact your Network Engineer for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Security Issue httpOnlyCookies="true" is not working with production environment

Dear All,
I have tired to make set cookie value as httpOnly
The development environment is working fine and give me an output like that
Set-Cookie
WSS_KeepSessionAuthenticated={3644d93c-d1d3-46cd-845f-42c01640ab21};
path=/;
HttpOnly
But when implement the same changes in web.config production environment its not working
Set-Cookie NLSessionCdomainweb=a98q9jnsy0vXk5+RHeHnlKmM+HnneA9KmhIAR6g1bJiwTs8sD6d7dfV1gBffc8HiJXBowxdO8LhZAiIEKiFY6PzNWySyRs5rvgCfPu8XIFnqKcN4XQ4UL9PN3JI3f4E6;path=/;domain=.domain.com
I am using sharepoint 2010, under web.config i made the following changes
Add following tags under system.web
<httpRuntime maxRequestLength="2097151" enableVersionHeader="false"
/>
<httpCookies httpOnlyCookies="true"/>
Add following tags under <system.webServer>
  <httpProtocol>
      <customHeaders>
               <remove name="X-Powered-By" />
             <remove name="MicrosoftSharePointTeamServices" />
      </customHeaders>
    </httpProtocol>
Can any one tell me why it's happening i have checked all possible reasons from my side but no success
Regards
Rashid Bilgrami
RB

Hi,
From your description, I know you want to set cookie value as httpOnly but it is not work.
Please try to add codes below to your global.asax file:
<SCRIPT language="C#" runat="server">
protected void Session_Start(Object sender, EventArgs e)
try
if (Request.IsSecureConnection == true)
                Response.Cookies ["ASP.NET_SessionId"].Secure = true;
catch (Exception)
</SCRIPT>
Please refer to this article:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/0fe55c13-3911-422e-af17-cb5c1ab2abd7/missing-secure-httponly-flags-on-sharepoint-2010-cookie?forum=sharepointadminprevious.
Best Regards
Vincent Han
TechNet Community Support

I'm having issues with my mail not working

My mail is not working properly, it's basically now frozen so i have it appear in my menu at the top of the page but can't actually open it fully to check the mail and also can't close it fully to allow me to shut downt he computer. Help!!!!!

Can you Force Quit? From the Apple menu, select Force Quit... you should be able to quit Mail. After that, just try restarting and see if Mail behaves.
Clinton

Spotlight "Show all in Finder" not working

Hello
I have a mac book pro 2.7 Ghz i& with 16 GB RAM
1) Whenever I search for something in spotlight, when I click on "Show all in Finder", nothing happens
Also, When I check the preferrences, I have some yellow triangles for the keyboadr shortcut
I've reindex everything but same issues comes up.
2) Also, it seems that it only searches on local drive, not on my external drives as well, even though they are also indexed.
Thank you

Got me stumped there. My understanding (limited) is that the Apple Events daemon works for a while when freshly launched, but for reasons unknown it gets bolloxed after a certain number of calls. No error messages appear in Console, which makes it especially hard to track down. If yours gets hosed immediately, that's not the usual pattern.
iPhoto and iTunes use Apple Events quite a lot.... if you have either of those apps running, you might see what happens without them. Failing that, see what happens when no applications are running. Finally, see what login items are being fired up (System Preferences => Users and Groups => Login Items) and disable those.
This bug only crops up on a small number of Macs, and as far as I know nobody's been able to track down what triggers it.

DMS Connector to Portal Issue PDF files does not work

I have a general issue regarding PDF files from DMS, these files are all defect when opened through the portal (works fine through backend access), but other document types works fine (like .doc;.ppt, *.xsl etc..).
It is possible to download the file to your local pc, but still the same error occurs.
When Adobe Reader opens a info box shows The file is damaged and could not be repaired.
I have tried to update Acrobat Reader without any luck.
Any ideas on how to solve this issue?
Thanks in advance
John

I will never understand why but in the end I rebuilt my 32 bit dell laptop from scratch and the pdf files can now be searched.
I cannot search them on a mapped drive as I was able to with Windows XP because now they must be indexed and windows 7 will seems not to allow a mapped location to be indexed which must be done to make the pdf files searchable so I have had to move the files to the local drive.
My Windows 7 64 bit systems can search the mapped drives just fine without needing to be indexed. Again I will never understand why this works and the 32 bit machine does not.

Spotlight indexing in mail is not working when I search, since 10.4.8 combo

Hi
I have noticed every since I installed the intel 10.4.8 combo update I have been unable to search my mail in Mail.
I assuming that it is spotlight that indexes the mail boxes. Though this only appears to be a problem when I am searching using the search box in Mail.
When I use the top right hand spotlight icon it works fine.
Does anyone know how to fix the search in Mail?
Thanks in advance.

I mean the search box in Mail itself and when
you search how it filters down in your inbox.
Actually, if you pay closer attention to what David has told you, you will see the banner he mentions provides for searching all mailboxes or the currently selected one, not just the Inbox, & for searching on the entire message; or the from, to, or subject fields alone.
The banner appears after doing any search using Mail's search box, even ones with zero results.
David wants to know what options are selected in that banner.

IOS6 Faces Key Photo Issue. Key Photos not working

Hi, I recently bought a new iPhone 5 and when I did my update and went to Photos/Faces/ I noticed that my Key Photos for my Faces were not showing and it chose random images. This used to work with iOS6 and my iPhone 4. Please provide a timeframe for when this issue will be fixed. Thanks.

Amitshree,
In firefox 3.6.10,i am not able to find the reset Firefox button.Copy all to clipboard button is their and Open containing Folder button is their.Please see my screen shot.

Spotlight search (search iphone) does note work half of the time.

When searching my iphone4s nothing show up half the time. (spotlight search) Sometimes it works fine and other times I type and it does not search or show anything. Powering down the phone did not fix. Just odd it works for a minute then seems to stop completly. No other problems besides this one.

OK, well at least it works 50% of the time.

Spotlight issue! mdutil -i -on not working

Similar Messages

Maybe you are looking for