Spotlight not working...other important systems compromised.

Hello, I have a slightly older MacBook.  It was purchased when leopard was out, but has been upgraded to lion, with ram added.
Had no problems with the OS until I installed the seagate diagnostics software about a week ago at their recommendation.
During the install, the computer hung during the shutdown of the mandatory restart.  It took me a pram reset to get the machine to start up again.  Since then, the following has been a problem:
-Spotlight has no index and won't search.
-The computer will not shut down, have to pull the plug.
-Finale (which uses java runtime) doesn't work, and the auto install of java run time won't go in.
-Software update starts, but the percentage bar freezes after a moment.
I have run the system restore partition, which went in okay, but did not change anything.  I have also followed the steps to uninstall the seagate diagnostic software.  However the problem still persists.  I'm guessing there is some sort of shut down script that is hanging the system, and preventing indexing from happening which prevents all of these other processes from happening.  Does anyone have any ideas for what to do next?
Thanks,
Chris Roode

Hey, that's some handy software.  It found everything except for two files that were located in the /System/Library/Extensions folder.  I guess that was out of the search scope.
Basically, I observed the startup screen and noticed that even with all of the files out, the system was still calling seagate objects on startup.  I read this helpful article:
http://osxdaily.com/2007/01/22/what-happens-in-the-mac-os-x-boot-process/
I followed step by step until I found the additional files in the /System/Library/Extensions folder.  I'm hoping that this is all the troubleshooting I need to do.

Similar Messages

  • HT5649 Version 11.1.4 Does Not Work on my system

    I had itunes version 11.1.3.8 and it was working just fine. I believe this version is the 32 bit version.
    itunes sent me version 11.1.4 which is a 64 bit version and it DOES NOT work on my system.
    Some how this important file was deleted. And I keep getting this message.
    The following is the message I get everytime I turn on my computer
    I can close it and my computer works fine except for itunes. I can not get into Itunes at all.
    MSVCR80.dll is missing. Itunes was not installed correctly please reinstall itunes.
    ERROR 7 windows error 126
    How do I remove version 11.1.4 completely and Reinstall version 11.1.3.8
    And do I remove everything to do with APPLE and reinstall.
    I have tried numerous times to uninstall Version 11.1.4 and it is removed but when I
    reinstall it is always Version 11.1.4 I would like Version 11.1.3.8
    Please advise Jeff Beez

    Hello there, Jeff.
    The following Knowledge Base article offers up the instructions on how to resolve the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Spotlight not working within program. Please HELP!

    Spotlight not working within programs. Cannot not locate files on network volumes.
    For example: if I am using Photoshop or MultiAd Creator Pro, and want to open a file, I will do File>Open and  use spotlight in the "Open" dialog, and it doesn't ever find anything? I can see the files but if I search it fails to locate. Same thing happens if I try to "Place Graphic" In MultiAd and other programs. It appears to be a universal issue regardless of program.
    I tried re-indexing spot light via the system preferences (privacy, drag in volume, remove volume). I also tried re-indexing via terminal.
    I tried mounting the volumes via afp, smb, cifs and nothing works!!
    This issue is handicapping production.
    Anyone??
    Thank you in advance RR

    Spotlight alternatives.
    EasyFind – Spotlight Replacement
    Find Any File

  • Another spotlight not working at all

    I have tried all suggestions from the other post about spotlight not working at all but archive and install. Is there any other way to fix it besides that? What are other people doing to fix theirs?

    I have just fixed the same problem on my Powermac, i was not even getting a spinning wheel when trying to search. It is a bit more involved than an archive and install but much quicker, i wouldn't recomend it if you're not familiar with the contents of install packages a little bit. here's the steps:
    1. Download and open Pacifist from macupdate.com and after the countdown click not yet and open the install packages from your OSX DVD (there is a specific button for this function).
    2. Use the find tool to search for all spotlight files (just search for spotlight)
    3. The list of files includes all references to spotlight found on the install dvd including language packs and applications so only the top 22 item are needed. These are the files in the Base system and essensials packages. although if you just did a full install then there is no real harm in doing the language variations etc too..
    4. Select the files that you want to install from the search drawer and click the install button. You will need an admin password to complete this.
    5. I didn't need to restart but you may want to delete the preferences file at ~/library/preferences/c.apple.spotlight.plist, and repair the permissions before restarting anyway.
    Do be careful that your not writing over updated versions of mail or other applicaions that are in the packages, i would advise having a good look through the search results and only installing those components in the base system and essensials, these were the top 22 on my DVD.
    Obviously this is at your own risk but it worked perfectly for me. Good luck
    SEB
    iBook G4 12in (800mhz, 640MB, 40GB)   Mac OS X (10.4.3)   Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)
    iBook G4 12in (800mhz, 640MB, 40GB)   Mac OS X (10.4.3)   Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)

  • IOS 8.1.1 Spotlight not working (temporary work around)

    Spotlight for me is an important way to get to contacts and applications on my iPhone and iPad. With the latest iOS 8.1.1 release, the spotlight feature on my iPhone stopped working completely and the only way to get it to work was rebooting the phone. Even after that it only worked for half an hour (tops)!! My iPad on the other hand had no issues at all.
    After going through a lot of forums, I limited my spotlight search to contacts and applications and reboote my phone. The problem seems to have gone away and I can finally work my phone with ease.
    Give this a try until Apple get their act together and roll out iOS 8.1.2.
    P.S - Restarting your iPhone or your iPad is NECESSARY after you've limited your options in the spotlight menu.
    P.S.S - I'm not sure if this will work for those with the same issue on their iPads but it's worth a try

    Same issue, Spotlight not working as it did, on my iPhone 5S and iPad 3 after 8.1.1. Very frustrating, I'm beginning to think I should do as a Windows user and avoid updates because Apple's QA has really become terrible. Every release is full of bugs, way more so than in the past. I used to look forward to updates, not any more. Wow, sad. I've done a restore but the problem comes back, Apple needs to fix this issue and maybe take some of it's billions and invest back in quality. Please.

  • Sharepoint web application is not working on client system

    my sharepoint we application is working on premises but it is not working on local system 

    I assume you mean its working on the server, but not on your client.  If so, make sure that you have registered the URL for the web application in your Domain Name Server (DNS).  If you can't resolve the name you won't be able to reach the web
    application.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • F4 is not working in my system.

    Hi,
       F4 help is not working in my system,its working fine in all other system.functional peopel are getting problem in f4 help.i checked the settings all are fine.Guide me for the same how to resolve this.
    Thanku

    Hi,
    Check the system which has F4 not working for help in tcode SR13 if the correct values are maintained.
    You can compare the system where its working and try and copy the parameters if its applicable.
    Cheers Sam

  • SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

    Hello,
    SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
    I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
    * Foundation Services
    * HFM
    * FDM
    Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
    While configuration,
    1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
    2) Also, I selected to configure Oracle HTTP server as web server.
    Both these steps were successful.
    But SharedServices and Workspace URL's are not working. Getting 404 error.
    SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
    Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
    When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
    Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
    Can anyone please suggest a solution for this.
    ####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
    ####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
    ####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
    Thanks in advance.
    Tej

    Hi John,
    today's update:
    * Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
    * During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
    * Started EPM system.
    * checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
    * Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
    ####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
         at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    ####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
    ####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
         at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    >
    Can you please suggest how to overcome this error of Weblogic?
    Thanks in advance,
    Tej

  • Web reporting does not work in BW system

    Hi-
    I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
    We get the following message when trying to run BW queries on the web:
    Not found
    The following error occured:
    %3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
    I've checked SICF and all services are activated.  I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there.  Here are our settings:
    rdisp/max_wprun_time                        3600                        
    abap/cache_area                             10000000                    
    abap/buffersize                             1500000                     
    login/system_client                         100                         
    INSTANCE_NAME                               DVEBMGS00                   
    SAPSYSTEM                                   00                          
    rdisp/wp_no_dia                             10                          
    rdisp/wp_no_btc                             6                           
    rdisp/wp_no_vb                              2                           
    rdisp/wp_no_vb2                             1                           
    rdisp/wp_no_enq                             1                           
    rdisp/wp_no_spo                             1                           
    DIR_TRANS                                   /usr/sap/trans              
    ms/server_port_<xx>                          PROT=HTTP, PORT=8080       
    icm/server_port_0                           PROT=HTTP,PORT=8080,EXTBIND=1
    DIR_ORAHOME                                 /oracle/BWD/920_64          
    ipc/shm_psize_10                            104000000                   
    ipc/shm_psize_14                            0                           
    ipc/shm_psize_18                            0                           
    ipc/shm_psize_19                            0                           
    ipc/shm_psize_30                            0                           
    ipc/shm_psize_40                            114000000                   
    ipc/shm_psize_41                            0                           
    Is there anything obvious missing?
    Thanks,
    Tristan

    Following seems a little odd....
    ms/server_port_<xx> PROT=HTTP, PORT=8080
    I would expect something like:-
    ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

  • Setting Workflow status not working in imported workflow from SPD to Visual Studio

    Hi all,
    I have created SPD workflow and imported in visual studio. When I deploy imported Workflow using visual studio feature I found that Setting Workflow Status action is not working. Do I need to change Set Workflow status activity in Visual studio to make it
    work.
    Rohit Pasrija

    Hi,
    According to your post, my understanding is that Setting Workflow status did not work in imported workflow from SharePoint Designer to Visual Studio.
    I try to reproduce the issue and the result is the same as yours.
    After I import the workflow, choose the .xoml file, the view is as below:
    To troubleshooting the issue, I add a new item to the project and select “Sequential Workflow” in the template.
    After I click the Tool, I find that there don’t have the “SetCustomWorkflowStatus1” activity.
    To set the status of the state, we need to use the “Set State” Activity in the “SharePoint Workflow” toolbar.
    That is the reason why the “SetCustomWorkflowStatus1” activity does no work.
    More information:
    Apply Custom Values to Visual Studio Workflow Statuses
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Custome Tcode is not working in QA system but working in DEV system

    Hello,
    We have copied QM11 tacode to ZQM11. We found this ZQM11 tcode is not working in QA system, but properly working in DEV system. When we are execute this tcode from QA system with all required input, it says
    "No objects could be selected that met your selection criteria."
    But when do it in DEV system it is working fine. I have done following steps to check error
    1) All authorizations are good
    2) I have compared E070 and E071 table to found transport done with proper way.
    3) I have checked SE93, tcode condition is good.
    4) SE97 -->found call transaction is QM11 for ZQM11
    5) From program code level Authority check maintained properly.
    AUTHORITY-CHECK OBJECT 'Q_QMEL'
                 ID 'QMART'    FIELD I_QMART
                 ID 'TCD'      FIELD I_TCODE
                 ID 'WERKS'    DUMMY.
    6) Performed authorization trace to found error agains object Q_QMEL (RC =4), but in the role Q_QMEL has define with it's  proper value supplied by our functional team.
    7) Shows all active object in SU24 against ZQM11 are good
    8) When we call tcode it has thrown the error agains Q_QMEL only
    I am not able to understand why does not work this tcode in QA system, although working in DEV is good.
    Please help me to resolve this issue
    Thanks
    Pavel

    Bieng declared $WERKS field as DUMMY, is not relevant, so no matter its value, it will pass..
    There's a catch! If even DUMMY means literally that no matter user has any value, he is still authorized but in reality for such \fields authorization check is only successful when a value ' ' or * is found in user's authorization else it errors out.
    Sorry confused with programs where AUTHORITY-CHECK has  ' ' coded instead of DUMMY. You are right, DUMMY specified for as field would pass authorization check with any/no value in user's authorization. Please ignore my statement
    Sandipan
    Edited by: Sandipan Choudhury on Dec 29, 2010 2:11 AM

  • I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

    I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

    You're talking about the dock?
    To check on that, go to System Preferences > Dock > indicate your preference.
    I can get iTunes up, and safari, but i don't know how
    Not sure what you mean - if you can "get it up" - does that mean you can launch it? What do you not know?

  • I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

    I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

    Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
    But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
    While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

  • Spotlight not working

    For some reason, all my apple utilities and programs are not searchable in spotlight and finder. For example, if I type iphoto, iMovie, or even activity monitor. Those programs wont show up. However, if I search for any other program such as microsoft word, they show up immediately.
    I checked spotlight's settings, applications are selected.
    How an I fix this.
    Thanks

    I didn't read through the post fully, but for anyone who has a problem with spotlight not working, try this:
    Open Terminal.
    Type: su –
    Press Enter.
    (This will bring you to a line asking for your password.)
    Type your password and press enter.
    (This will bring you to the root directory of your hard drive.)
    Type: mdiutil -i on /
    Press Enter.
    (This will bring you to a line saying "Indexing Enabled".
    This should fix the problem and spotlight should immediately begin reindexing your hard drive's contents so they will now be searchable. Everything should look like the following. It worked for me without any issues.
    *su -*
    *Last login: Mon Jun 28 13:14:23 on console*
    *server:~ Nkyru$ su -*
    Password:
    *server:~ root# mdutil -i on /*
    * Indexing enabled.*
    *server:~ root#*
    Special note: I'm using a black macbook, 2.0ghz 2gb ram, OS X Server 10.6.4

  • Spotlight not working after upgrade to Snow Leopard

    Spotlight has not been working properly since I upgraded from Tiger to Snow Leopard. I only get partial results. I can see files in Finder that Spotlight is not picking up. It does not pick up most of the items it should.
    I've reindexed and that doesn't help.
    It worked perfectly before the upgrade.
    Does anyone have a fix?

    Try adding every drive to Spotlight's Privacy Pane in System Preferences>Spotlight, wait a few minutes & remove them, then wait a few hours/days to see if it's better.
    Though slower, in the intterim, you might try...
    EasyFind...
    http://www.macupdate.com/info.php/id/11076
    Find Any File...
    http://www.macupdate.com/info.php/id/30079/find-any-file
    I've actually disabled the worst Searh utility/Function I've ever seen on most of my Macs, just keep Spotlight active on a couple to try to assist with all it's problems.

Maybe you are looking for