Spotlight Preferences - one Search item is unlabeled

When I open the Preferences Pane for Spotlight, and look under the Search Results tab - there are 16 items which can be checked to include those categories in a Spotlight search. The very last one (number 16) is not labeled. All I see is a checkbox, then nothing - no name to identify what it is that I'm including, or excluding from my Spotlight search. I have seen a screen shot that makes me think default item 16 may be for "Developer" stuff - not sure.
Does anyone know what could cause the item to appear without a label?
Thanks,
-gw
Recently upgraded to Lion (10.7.5) from SnowLeopard on a mid-2011 iMac, 2.5 GHz Intel Core i5

Yes. 16 is Developer. If there was a label, it would be for the XCode development tools software.
It's available for those building iOS and OS X apps.
It looks like mine ...

Similar Messages

Spotlight preferences not saved

When I uncheck items in System Preferences/Spotlight/Search Results, my changes are not saved. Spotlight continues to search for categories I unchecked and when I open the Search Results preference window again, everything is still checked. What gives?

Step one. Create a new admin user account, log into it, reset Spotlight prefs, and see if the problem persists.

My hard drive icon is gone from desk top and does not show up in spotlight or finder searches!

Hi there
recently my hard drive icon has disappeared from my Macbook Pro (10.7.4) desk top and does not show up in spotlight or finder searches! I have tried several fixes posted online for earlier operating systems with no luck.
Also, when I connect my external hard drive the icon does not appear on the desl top nor in the finder either, making looking for documents impossible.
Help!!!
Thanks in advance!
Marni

In "finder" click "finder" then "preferences" and navigate to the "general" tab.
Select which items you would like to have show on your desktop.

My Safari homepage is hijacked by One Search, how can I get rid of it?

Has anyone had the same problem as this? My Homepage keeps defaulting to a search page called, 'One Search' and I cannot get rid of it. I reset my homepage only for it to be bypassed and One Search to appear overtime I open the browser.
Also if I click on any page that is open I get pop-up ads that are not stopped by Adblocker. I have installed the OS X 10.10.1 hoping this would fix it but it has not.
Any ideas would be welcome.
MKL1961

There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Leopard's Spotlight doesn't search Mail messages

Leopard's Spotlight isn't searching email messages. I made a clean install of 10.5, and have two POP accounts. The message files are right there under ~/Library/Mail/... . I rebuilt the index for the system volume by adding and then removing the volume from the Privacy zone in Spotlight preferences. I also tried some of the command-line suggestions posted elsewhere for this problem. I recently added my backup volume to the privacy zone, but other than that the zone is empty.
But the problem remains. Outside Mail.app, Spotlight never comes back with search results that are mail messages. Inside Mail.app, searching "entire message" returns 0 results. Does anyone know how to diagnose this problem? Can I see if a particular file is included in the metadata index?

Hahaaaa! Solved it - at least for me...
Please read the whole explanation first before just gabbing any presented commands and executing them in the Terminal. The solution requires no Terminal.
I had exactly the same problem described by MikeW and JJ. I tried everything like you before at no avail, too. But I tried one more thing that did work and indexed all my mail. Here is what I did at the command line. Don't type the command right away. It will work, but this is not the root cause of your problem, I present it just to explain:
find ~/Library/Mail -name "*.emlx" -exec mdimport {} \;
This searches for the individual message (*.emlx) files themselves and throws them one by one onto the mdimporter which imports them just fine. Still, a plain mdimport ~/Library/Mail would not work which pointed me in the right direction: Spotlight did not "see" these individual message files. But Why?
I fiddled a bit with file/folder permissions since I also simply upgraded from Tiger and ended up with old Tiger permission based user accounts. No result. I discovered, that in Finder the mailboxes, say ~/Library/Mail/Mailboxes/INBOX.mbox etc. were displayed as package files instead of folders. Strange. So again I tried mdimport -d1 ~/Library/Mail now with a bit of debugging. Aha! Spotlight imports this folder as type 'dyn.ah62d4rv4ge81g45mr3wgn8a', or similar, a dynamic UTI, instead of with 'com.apple.mail.mbox' as what it should have been. Since this unknown dynamic UTI dosn't mean anything sensible to Spotlight, it would simply skip the folder, not scanning it's contents with the well known result that mails cannot be searched by content.
So, what is essentially overwriting these UTIs? Especially because this would not happen in another Leopard-created user account. I felt guilty as I added some custom UTIs in the past, but nothing to do with mail at all. So who carries UTIs for Mail.app? Well... Mail.app! Another Mail.app? YES! I remembered, that I had an older complete pre-Spotlight system backup on my current system, including all applications including Mail.app in version 1.3.something. AFAIK only with Mail 2.0 Apple changed the way Mail saves messages and they apparently also changed the UTI of .mbox to the new format. I simply deleted the old version of Mail.app. Immediately after that the icons of the .mbox changed and I could open these folders in Finder. I tried again mdimport ~/Library/Mail and - boom - Spotlight imported all my mails!
Long story to explain my thoughts, here are 5 steps for you to try:
1. Search your system to find out if you have multiple different copies of Mail.app. You can do that with Spotlight/Finder or enter in the terminal:
sudo find / -type d -name "Mail.app" -ls
(You need to be admin to sudo, type your password when prompted)
2. Locate and check the found versions of Mail.app in Finder via the get info window.
3. Delete all but the actual copy of Mail.app in /Applications from your system (empty trash!).
4. Enter the following line in the terminal to have Spotlight import your messages:
mdimport ~/Library/Mail
Should take much longer now, depending on the number of mails you have.
5. Check the result by searching mail content in Mail/Finder/Spotlight, enjoy!
Note: If you did find and delete old versions of Mail.app, but step 4 did not work, you might have to log out and in or you can even try to restart the machine. In my case the result was instant. If all of that did not work for you - sorry - but probably the above helps you to track your particular problem down.
ecke

Leopard's Spotlight doesn't search...

Hi there!
I've got a problem with Leopard Server...
It's the first time that I run a server version.
Everything works great! But... Spotlight...
Spotlight doesn't search anything on my internal HD. On my external HD (connected with FireWire) it works!
I already deleted the .Spotlight Folder on my startup disk... But that doesn't help... I added my HD to the "privacy" Tab in Spotlight and deleted it after that... But that doesn't help, too...
Has anybody of you an idea how to make this work?
Thanks a lot!

I got to Spotlight to search and index my internal harddisk again.
I rebuilt the .Spotlight-V100 folder including the subfolder which I copied from a working (searchable external harddisk) which I initially deleted in my trial to get Spotlight working again.
After a lot of tinkering with mdutil, Cocktail (a superb OS X system utility) and the Spotlight preference panel the overal problem for Spotlight might have been that I have got the internal and the Windows partition named starting the same name "Aristoteles" then a "blank" and the "HD" on the OS X partition and "WinXP" on the Windows partition. Obviously that got Spotlight confused because when I specifically excluded the windows partition (using the Spotlight preferences panel) and reactivated the remaining OS X partition using the "sudo mdutil -i on /Volumes/Internal" command (I renamed the OS X disk partition from "Aristoteles" to "Internal") ... bang Spotlight kicked in ... but the strange thing is that Spotlight kicked in telling me it is searching the OS X partition "Aristoteles" instead of "Internal".
I cannot remember any technical comment (this is pure "trial and error" on my side) that Spotlight only takes the first part of a disk name. But if two partitions on the same disk start with the same name Spotlight may run in to troubles unless one is excluded from searching ... and even a later renaming of a partition doesn't help ...
Message was edited by: OlympusUser

After updating to 4.3.5, spotlight does not search within text messages

HI,
I just updated my iPhone 4 to 4.3.5 and Spotlight does not search within the text of my SMS text messages any more. It only searches by the name of the SMS senders. There does not seem to be any setting I can adjust and I have restarted the phone several times but nothing changed.

I figured out how to get it working while retaining your data.
Connect your phone and perform a full backup.
Erase all data/media or restore the phone
Select setup as a new iPhone when prompted in iTunes. Give it some other name (i.e. "New").
Grab a copy of iBackupBot from here http://www.icopybot.com/itunes-backup-manager.htm
Run iBackupBot and select the new backup
In the file list, locate the file name SystemConfiguration/preferences.plist
Open the plist be double-clicking on it.
Copy the contents of this file to clipboard.
Select the full backup of your iphone under it's original name (make sure to grab the one with the latest date).
Locate SystemConfiguation/preferences.plist
Scroll to the bottom and note the Hostname for your phone.
Replace the contents of this file with the that from the "New" backup making sure to change the hostname and phone name in the last section of the plist.
Save the changes to the plist.
Connect your iPhone to iTunes
Right-click on it and select "Restore from backup"
Locate the latest backup under your phone's original name
When it's done restoring and reinstalling your applications, you should once again have push notifications that work over the cellular network.

Problem: Some categories in Spotlight preferences are empty

Hello,
I have a MacBook 13" from the mid of 2007 (2,16 GHz Intel Core2Duo, 3Gb RAM).
Currently Mac OS X Lion 10.7.5 (11G63) runs on it.
I found a PROBLEM on the SPOTLIGHT PREFERENCE PANE:
In total I can see up to 15 categories, but only 5 of them are working like expected.
I can see the name and the icon of this 5 categories.
Those categories are
- Applications
- Systempreferences
- Documents
- Folders
- Messages & Chats.
All other categories do NOT have a name and an icon.
That means the categories are "empty" and I do not know what they mean.
I have alredy looked for similar problems in here. I although found some old ones,
but the answers in there did not solve my problem...
1) https://discussions.apple.com/thread/3527634?start=0&tstart=0
2) https://discussions.apple.com/thread/1890908?start=0&tstart=0
In addition to that, I already deleted the com.apple.spotlight* files in ~/Library/Preferences/.
But this did also not solve my problem...
Do you have an idea how to solve this problem?
Thanks in advance!

Open up
 > System Preferences > Users & Groups
Create a new admin account. Log in to that account and see if the problem persists there, too.
If not, go back to the account with the problem, remove everything from login items at
 > System Preferences > Users & Groups | Login Items
Restart the mac and test.
If the problem exists in the test account and/or removing login items does not resolve the issue, backup your system, restart while aslo holding down 'Command' and 'R' keys and choose 'Reinstall OS X' from the dashboard.
Your own files should be left in place. The backup was just for precaution, but don't forget to do it in case the reinstall goes wrong.

Spotlight and mail searches not working, but...

I contacted Apple Support by phone and they had me go through all of the procedures to re-index the meta data and so on on my iMac and still my Spotlight and Mail searches are not working properly. (I cannot find certain files even though I know they exist...more often than not!) Supposedly, when I "forced" a re-index operation by going to Spotlight Preferences and changing Privacy settings for the entire hard disk and then changing them back, the Spotlight icon on the top right of the menubar was supposed to indicate that re-indexing was taking place, but that never happened. It seems that I possibly have a corrupt metadata file which just won't re-index, or some kind of permission changed which doesn't allow re-indexing to happen, or SOMETHING like that.
Is there a singular hidden "index" or metadata file on the Mac under Lion where this information is stored, can I get at it so I can trash it, and if I do, will the computer automatically rebuild a new index file (if such a singular file even exists)?
I asked this question at a semi-local Apple Store Genius Bar as well, and they were scratching their heads. I have not yet brought the machine in to the store --- if I can avoid that lengthy step, I'd much prefer to fix this here in my office. (The machine works fine otherwise, and I need it here all the time, it's just that searching doesn't work)
I have also tried a re-install over the existing OS (leaving all my apps and documents in place), but have not tried a complete erase-and-install installation. I have a complete Time Machine backup of the entire drive, but the question remains...if I use Apple Migration Assistant to bring the apps and documents back in from Time Machine after doing a "clean" install on a wiped-clean hard drive, won't Time Machine also restore the old metadata that I suspect is corrupt? If so, how would I go about restoring all of my apps and documents without the use of the Migration Assistant or the Time Machine backup file (which may contain a corrupt index file)? If I do a hard drive clone with one of the available utilities dedicated to that purpose, how do I restore JUST the things I need (including serial numbers, etc) without risk of bringing over "bad" index files?
By the way, this machine was running Snow Leopard for well over a year before I upgraded to Lion, with no searching problems whatsoever.
Thanks for any help that anyone might be able to provide. I know I ask a lot of questions, but I don't want to go through the lengthy cloning of my hard drive and then doing a "clean" install and then be saddled with the same problem again.

Hi Linc,
I was able to get some text to appear by choosing "All Messages" from the Error Log list. Here's what I got when i filtered "mdworker" (I have indicated where I removed repetitions):
3/14/12 9:24:10.617 PM
com.apple.mdworker.isolation.0
failed to parse embedded CMap.
3/14/12 9:24:10.617 PM
com.apple.mdworker.isolation.0
syntax error, unexpected DICTSTART.
[about a dozen instances of the above two lines were removed]
3/14/12 9:24:10.622 PM
com.apple.mdworker.isolation.0
*** process 2211 exceeded 500 log message per second limit - remaining messages this second discarded ***
3/14/12 9:24:26.203 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
[Five instances of the above line were removed]
3/14/12 9:24:55.603 PM
mdworker
Unexpected EOF, returning last token as fallback
3/20/12 3:54:30.197 PM
mdworker32
kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
3/20/12 3:54:30.735 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
3/20/12 3:54:30.736 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
3/20/12 3:54:30.736 PM
com.apple.mdworker.isolation.0
Range {0x0000, 0xFFFF} is not 1-dimensional; handling as a special case.
And here is what I got when I filtered using "mds" (since these are all at different times, I didn't remove duplicates):
3/14/12 9:35:35.672 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/14/12 10:45:54.051 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/14/12 11:45:55.907 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 12:45:53.271 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 1:45:52.702 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 2:45:52.837 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 3:45:52.046 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 4:45:51.586 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 5:45:51.996 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 6:45:52.049 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 7:45:51.647 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 8:46:05.149 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 1:27:56.526 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 2:25:20.942 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 3:26:14.623 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 4:26:06.091 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 5:26:29.923 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 9:48:38.902 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/15/12 10:15:02.995 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 7:55:44.632 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 8:07:28.002 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 4:28:06.236 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/16/12 4:31:05.891 PM
mds
(Error) LSOF: File '/Volumes/CAROLLE' (fd=15) left open on device 234881032
3/19/12 5:19:52.696 PM
mds
(Normal) FMW: FMW 0 0
3/19/12 5:19:52.704 PM
mds
(Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
3/19/12 5:19:59.291 PM
mds
(Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
3/19/12 5:20:31.340 PM
imagent
[Warning] Creating empty account: Default for service: IMDService (SubNet)
3/19/12 6:29:40.573 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/19/12 9:15:43.527 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/19/12 9:17:32.723 PM
mds
(Error) LSOF: File '/Volumes/CHUBER' (fd=22) left open on device 234881032
3/19/12 9:39:28.149 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/19/12 10:43:40.855 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 7:22:42.424 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 9:46:04.479 AM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 3:54:42.852 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 4:23:54.016 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 5:23:56.550 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
3/20/12 9:18:16.565 PM
mds
(Error) Volume: Could not find requested backup type:2 for volume
I hope some of this information is useful in solving my problem. Thanks in advance for your help!

One Search service application for multiple web applications in a single server

We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one Search service application , create a Content source for each web
application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one Search Service application for all web applications and using Result sources ,
I am not getting the results. What could be the problem.

Hi,
One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
Multiple SSA's will eat up RAM/CPU like a mother :)
As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
Thanks,
Mikael
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

[Forum FAQ] Group Policy Preferences Scheduled Tasks Item not working when the option Run whether user is logged on or not is selected

Scenario:
We use one of the following Group Policy Preferences Scheduled Tasks item to deploy a task to clients:
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
Computer Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Scheduled Task (At least Windows 7)
User Configuration -> Control Panel Settings -> Scheduled Tasks -> New -> Immediate Task (At least Windows 7)
(Note that on some platforms, "At least Windows 7" is replaced with "Windows Vista and later.")
After designating a user account to run the task, we select “Run whether user is logged on or not” option, and “The Do not store password…”
check box is automatically grayed out (See Figure 1).
Figure 1
After finishing configuring the task item, on a client, we run command
gpupdate/force to forcefully update group policy. However, on the client, when we check if the task is listed in Task Scheduler snap-in, the task is not displayed, and when we run
gpresult/h report.html to collect group policy result for troubleshooting, we see an error as similar as shown in the following figure (Figure 2).
Figure 2
Cause:
To make the scheduled task run whether the user is logged on or not, we need to store the password of the designated user account. However, for the content of the scheduled
task item is stored in Sysvol where it’s not safe to store passwords, this function has been deprecated.
Workaround:
We can run the task with system account
NT Authority\System, or we can use specific user accounts to run the task when the given user is logged on. (See Figure 3)
Figure 3
Reference:
MS14-025: Vulnerability in Group Policy Preferences could allow elevation of privilege: May 13, 2014
http://support.microsoft.com/kb/2962486
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello Everyone,
Succeeded !!!!!!!
Even i was struggling with this same Problem to execute a batch via Window scheduler and set the setting to "Run whether the user is logged in or not".
I tried many time but the batch runs with " Run
whether user is logged on" and not with "Run
whether user is logged on or not".
what i discovered is that there was one mapped drive
path in my batch file which was not the complete path like y:/AR.qvw actually what i did i changed that map path to the complete path like \\servnamename\d$\AR.qvw and the batch executed successfully with the setting "Run
whether user is logged on or not"
The
conclusion is that check the dependency of the script on external resources because when you check this option "Run
whether user is logged on or not" It actually conflicts. This my discovery.
If
you have any question write me on [email protected]
Thanks
& Regards,
Arun

Spotlight doesn't search imdb or bing, why?

It was mentioned that spotlight would also search the web. Well, in my case it doesn't. I have all sources checked in System settings for spotlight.
But when I search for i.e. Mel Gibson I only recieve results from my harddrive and dictionary.
Yes, I am on WiFi and connected to Internet. Running Yosemite on my MBA. I live in Sweden, but that shouldn't matter.
Anyone else had this problem and found a sollution?

Same problem but only on one share out of three.
I just setup a OS X Server (10.5.2), standard (easy) configuration. Clients are 10.5.2 as well. Absolutely nothing out of the ordinary.
But spotlight searches are ONLY working on one out of the three shares! I tried deleting the Spotligt database (via Cocktail) and rebuilding but it didn't help.
The something strange happened! One folder on one of the non-indexed shares was indexed but nothing else. Almost as if Spotlight had done a little bit of work and then crashed. But the md-processes are still running. Strange...
I've tried looking for Spotlight log messages but haven't had any luck...
Amazing that such a central piece of OS X Server can be so hard to diagnose. After searching the forums I understand that I'm not the only one with problems.
Apple - how about user-friendly tool to verify and peek at Spotlight databases?

Spotlight Doesn't Search Servers anymore?

Spotlight used to search servers attached to my computer such as backup drives I'd mount here at work but lately no matter what you search for on the drive it can't find. It comes back empty handed. What is the story here? is it a bug or something else i'm not aware of?
Any help would be great

Same problem but only on one share out of three.
I just setup a OS X Server (10.5.2), standard (easy) configuration. Clients are 10.5.2 as well. Absolutely nothing out of the ordinary.
But spotlight searches are ONLY working on one out of the three shares! I tried deleting the Spotligt database (via Cocktail) and rebuilding but it didn't help.
The something strange happened! One folder on one of the non-indexed shares was indexed but nothing else. Almost as if Spotlight had done a little bit of work and then crashed. But the md-processes are still running. Strange...
I've tried looking for Spotlight log messages but haven't had any luck...
Amazing that such a central piece of OS X Server can be so hard to diagnose. After searching the forums I understand that I'm not the only one with problems.
Apple - how about user-friendly tool to verify and peek at Spotlight databases?

Spotlight doesn't search Word 2008 doc(x)s

Though Spotlight doesn't have any problems searching within older Word files (all with the .doc extension), it does not search within the new Word 2008 .docx files. It does include the file names of .docx files, but doesn't seem to be able to search within the docs themselves. Does anyone know how to fix this? Thank you so much!

Hello arnoota,
for me Spotlight's content search works for docx, too. Are the info in your signature correct? If so you should install the 10.5.4 update of Leopard! At least for 10.5.3 some changes concerning Spotlight are documented by Apple, so probably this issue got fixed as well with one of these two updates.
floba
(MN358)

Spotlight Preferences - one Search item is unlabeled

Similar Messages

Maybe you are looking for