Spotlight starts indexing after every restart and there is a scrolling delay with both mouse and track pad.

I had to restart my MBP three time, two after it crashed. Every time Spotlight starts to index the content on my Mac
which takes two hour. Then there is a delay when I start scrolling, both with the mouse and with the track pad.
I also notised that after changing the icons with Candybar they still appear unchanged in Launchpad, which makes
it confusing. Launchpad isn't consitent when putting the apps in aphabetic order, but jumble up some of the apps.
i don't get back the wab sites after restart as i was to believe I would.
As Jobs sez; And more thing.
Well one more might OK, there are more bugs then that, but I to tired to tell them all.
I have never found so many bug in such a short time (only in two hours with Lion now) with any other OS and I have worked with Macs since -91.
God help us.

Hi, me again, more data.
I have found that some plugins are accessing the internet without my permission.
And when I went into the plug in menu via the addons options through the Tool Menu option, I found the plug ins there.
BUT I never installed those plugins, and now they are there and they are accessing the Internet. Here are two images to show the plug ins disabled and yet another image showing them still accessing the Internet even when disabled.
I then removed them from the system (I did back them up first, just in case).

Similar Messages

Trouble scrolling up with both BT and Wired MightyMice

I recently lost the ability to scroll up with both my bluetooth and wired mouse attached to my iMac.
It's starting to get really annoying when using any internet browser.
Does anyone have any suggestions? They both can scroll down and left and right, it's only the up function that is impaired.
Thanks!
Laura

Hello Il:
Welcome to Apple discussions.
It may not do anything, but resetting the PRAM could help:
http://support.apple.com/kb/HT1379
Barry

Bought my macbook pro 2 days ago and theres already a slight black mark next to the track pad?

how the **** does this even happen? the mark is where my palm usually is when im typing. it really shouldnt bother me but considering i spent a grand and ive had it for 2 days it annoys me. is there any way to get it out? I can post a picture if necessary. Also, how do i tell if i have mountain lion?

All new Macs come preinstalled with Mountain Lion. To confirm, click on the Apple/About This Mac
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

OS X Lion Spotlight continues to index after every bootup

My Spotlight continues to index itself after every restart or bootup. I have had OS X Lion installed for over 3 weeks already, why does this continue to occur? Also I have removed the option to "Reopen windows when logging back in" through the system preferances but yet it continues to give me that option whenever I Shut Down my Mac and to add to that the option is always checked. Shouldn't it been removed when I removed it from my system preferances?

I am having the same issue. This is a real pain in the butt. Really eats up system resources while I am trying to get started doing work.

BI Publisher (Obiee 11g) Scheduled jobs start randomly after services restarting

Hi everybody,
I've a problem with scheduled jobs on BI Publisher that start randomly after server restarting.
For example if there's a job scheduled every day at 8.00 am it works fine until the server is not restarted but when I restart it next job running start at 9.28 am (it is an example because the real start time is very unpredictable).
In my case bi publisher is integrated with obiee 11g (11.1.1.6.2) and I've scheduled jobs with administrative user (weblogic). For this user I've set the Bi Publisher Preferences (report locale = Italiano-Italia, Report Time Zone = GMT +1:00) from obiee analytics user account preferencies.
Can anyone have this problem too and help me?
Thanks
Annalisa

These are not helpful. The first link is to OBIEE 10g and the second is just an install guide. I am having the same issue with BI Publisher returning java.lang.NullPointerException in OBIEE 11g. Any help would be appreciated. Thanks,
Paul
Edited by: pneedleman on Nov 17, 2010 10:15 AM

Same bugs occuring after every restart

I'm using webOS 2.1.2 on an HP Veer 4G. Every time I restart the phone, the following bugs happen:
1) The Voice Dial shortcut that I put on the taskbar (wave) has been removed; also, the Voice Dial shortcut that I had moved to a custom location in the Applications panel is lost and the icon is moved to the last spot. Every time, I have to move it back to where I want it in the Applications panel and then re-add it to the taskbar (wave) area.
2) Even though I've already gone through the entire tutorial in hopes that it would never bother me again, a Gestures Tutorial notification comes up every single time the phone starts up. I would just like to delete this application, if possible, but I don't see a way to do it like I can with custom apps.
Has anyone else experienced these or similar issues after a restart and know of any solutions or work-arounds? Also, is there an official place that I can report bugs to Palm/HP? Thanks!
Post relates to: HP Veer p160una (AT&T)
This question was solved.
View Solution.

Thetreoguy:
Thanks for the reply! I'll look forward to an update for the Voice Dial app soon.
Regarding the Gesture Tutorial, you are correct that it did not finish the first time I used it. The tutorial actually locked up on me and I had to shut it down. I've followed it through to completion a couple of times since then, but it still pops up after every restart.
What exactly will happen if I go to Reset Options and Erase apps and data? Will it erase my personal data that I've spent a long time adding, or just the default apps? Once it erases the apps, how do I get them back (with the exception of the Gesture Tutorial, of course)? If it erases all my personal data too, is there a way to back them up and copy them back to the phone and still preserve all contact information and the link to the contact photos I've added?
Thanks again for your help.

8 fonts in the trash after every restart!

Hi.
Snow Leopard 10.6.1 is working great but I am finding 8 fonts in the trash after every restart!
ArialHB, Corsiva, Nadeem, NewPeninimMTBoldInclined, Baghdad, MshtakanRegular, NewPeninimMT, NewPeninimMTInclined.
This can't be good. Does anybody know what that means and what to do?
I see a lot of people have font-problems.
W.W.

Your choice - Back them up to CD-R if you've a mind, but I'd pull the trigger, finish them off and get rid of them. They've ended up there for a reason.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come in from MS Office 2008, including fonts related to an Equation Editor installation.
Good luck going forward.

HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min

my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto app on my iMac bc a visa vas about 3:15 min. What should I do to get my imac past this?

According to your posted Profile here you are running a PPC based iMac. This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
Hope this helps

My BlackBerry z10 delete after every restart

After I installed os 10.3.1.1865 into my blackberry z10 stl-3, it's resets after every restart or the battery drains, all my apps, settings, documents will be done...
please what can i do?

Hi @man605
Can you confirm that running this tool produces The fix is not applicable to this device?
Assuming that's the case, if possible can you please reproduce this issue can capture two sets of logs for me?
To do this complete the steps below.
Log Set #1 - Before restarting
Restart your device
Within 5 minutes of restarting, create a new document using Docs to Go
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
Log Set #2 - After restarting
Restart your device
Within 5 minutes of restarting, verify the file created using Docs to Go was removed
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
After completing these steps, open File Manager and browse to documents\logs.
Within two files will appear along the lines of bbswltlog<date>.zip. Tap and hold each file followed by tapping Share
Select your email address and send the log files to supportforums[at]blackberry.com with the subject Attn Ty; Logs from man605
When you send your email, please include your device PIN as well. Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

Sticky Keys keeps turning off after every restart

the Sticky Keys option in the universal access prefs pane keeps turning off after every restart. how can i fix this?

It seems to be a common problem in the OS that when you restarts some of the settings get reset. For me it happens with the screeen dimming before sleep and the double click using 2 fingers and maybe others that I don't know about. I am hoping that its fixed in 10.4.7 which should be out within a week or so.

What does it mean when I start my computer and there is a file folder with a question mark?

What does it mean if I start my computer and there is a file folder with a question mark blinking?

That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

How do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?

how do I open and use this app after I have paid for my subscription? I previously downloaded Primeir Pro CC for the trial and when I try to open the app it says my trial has ended and there is no other option to sign in and use the app?

Remove all current Adobe software. Download Adobe Cleaner Follow instructions.

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Please, help! After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.

Please, help!
After upgrading to Yosemite, my dock has disappeared, along with the dashboard and the wallpaper! Can anyone help? I'm using a MacBook Pro, retina, bought it last year.
Thanks

Have you been trying to download from the app store? Did you get a message?
As a suggestion, you might go to an Apple store (genius bar appointment) for help. As far as I know, there should be no charge.
Barry

In SMO there is any option for run both ExecuteNonQuery and ExecuteWithResults.?

In SMO there is any option for run both ExecuteNonQuery and ExecuteWithResults query at simultaneously?

Hello,
First, in a client session nothing can run "simultaneously", all statements are executed in sequence. And what should
it be good for to run ExecuteNonQuery +
ExecuteWithResults; both executes the SQL batch, the only difference is, ExecuteWithResults returns a result?
But if you like, start one by one.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Spotlight starts indexing after every restart and there is a scrolling delay with both mouse and track pad.

Similar Messages

Maybe you are looking for