Spotlight stoped working after 3 days

After installing and being happy with Mac OS X v10.5 Leopard 3 days later for no reason Spotlight just stopped working. I enter a search and I get no results back. As if my drive has nothing on it. I tried the preferences pane and didn’t see any setting for turning indexing off and on and I don’t remember shutting it off (is it possible?).

Try this - go into your Spotlight preferences and click on the Privacy tab. Drag your hard drive into the box and you'll see it added to the list. Then remove the hard drive from the list. This should reset the drive's Spotlight state and make it re-index the drive. Good luck!

Similar Messages

My flash player stoped working 2 days ago and it wont install or update it stops at 47% i tryed all

my flash player stoped working 2 days ago and i tryed all the tips and adviceto fix it /update it still stops instilation at 47 to 50%

What is your operating system & browser?

Blackberry stoped working after being droped.

Blackberry stoped working after being droped.

Hi and Welcome to the Forums!
Please open a new thread in the forum for your specific device so that those experts can help you:
http://supportforums.blackberry.com/rim/?category.id=Smartphones
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Xperia z Camera stoped working after few pictures

From when i update my Xperia Z to Abdroid 5.0 lolipop my phone starts over heatind and camera stoped working when phone is overheated which was not a problem in previous versions of android so i want to know the reason behind it and the solution plz

i will must try this process when i am free in few days or may be weekend but when i start facing this problem after some days i factory reset my phone from phone settings without erasing internal storage but the problem is still here xavinux wrote:
Hi @OwaisK I suggest you to first run a backup of the device information like this:
http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253
Try performing a system repair using PC Companion:
http://support.sonymobile.com/gb/tools/pc-companion/
This will factory reset your phone and erase all data. You might need tocharge your device for about 1-2 hours before so the device has at least 80% battery. Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device). Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process. If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose
Windows 7 or XP.
I hope can be useful.
I'm at disposal for any question.
Best Regards,

Why is Photostream so flakey? I got it to work after days of prodding and cursing and now it has frozen up again. Grrrrr!

And this was just between an iPhone 4S and an iPad.
Then, feeling brave I decided to add my PC. Big mistake! I downloaded and installed the iCloud software and configured the control panel.
I waited and waited and waited but nothing. When I restarted the computer and looked at the Photostream directory it said that it was not running and I needed to go to the control panel. I did this and tried to turn it on again. Nothing worked. After a lot of prodding I got a warning about permissions.
I de-installed iCloud, removed all directories and re-installed it. I reset iCloud on the website. A day later it has started to work but now it is ignoring all photos on my iPhone, even those that are only a day or so old and that I actually want.
In total frustration I Google and someone recommends using Dropbox. I install this on iPad, iPhone and PC and I can't believe it; it all works and all photos are now synchronised on all devices. How easy was that?
Why can't iCloud and Photostream work like that? I have no confidence in this software and I suspect that even if it works now it will stop working in a week or so.
I am absolutely thrilled with my iPhone and iPad but I am totally turned off by this awful photo sharing software. It doesn't work properly and it is not robust. The slightest thing prevents it from working and a change of winds stops it working. My take is that it is basically unusable, but maybe I didn't persevere enough.
My pc by the way is a very recent Dell workstation running Windows 7.

Thanks for that.
Curiously, after days of trying to coax Photostream into life with no success, after setting up Dropbox and watching it upload the photos I looked at the Photostream directory and lo and behold some photos were also appearing. It was like Photostream had got over its sulk period and had decided to start working. It wasn't going to be upstaged by Dropbox maybe?
But you are right, when you reset Photostream it then ignores all photos on all devices before that time. I find this frustrating as I want to get all the photos out of my iPhone and iPad and backed up on my PC. Photostream doesn't seem to support this. It would be great if there was a once-off sync function in Photostream.
if Photostream worked seamlessly this wouldn't be an issue but it clearly doesn't.
I've noticed Dropbox also has an annoying feature that it won't automatically update the photos without going into the Dropbox app whereas Photostream does do this automatically - when it is having a good day that is.
I guess there are other ways of getting stuff out of my iPhone and iPad but I am a newbie to Apple and need to explore this more. All suggestions welcome.

Spotlight not working after fresh install of Mac OS X

Hi,
I have erased and installed the Mac OS X on my powerbook and spotlight is not working. I have tried almost all the solutions provided on the forum.
I have tried adding the root drive to the privacy section of the spotlight preferences but it doesn't list the drive at all.
I have tried using spotless, Yasu, Cache out X, deleted the spotlight.plist file
Nothing works! It should be working after a fresh install. My computer just came back after a hard drive replacement and the spotlight wasn't working even then. I thought a fresh install of the OS would help, but can't get it to work.
Can anynody suggest anything? Your help would be highly appreciated.
Thanks,
Aditya

Hi Tom,
Thanks for the reply and the link.
I re-installed the OS again! This time using the UNIX file system setting during installation. Then when I booted my computer, Spotlight worked like a dream. But then I connected my external firewire hard disk and it stopped working!
Is there a work around for this, can I get spotlight to work again?
Thanks,
Aditya

Satellite A200: Some devices stoped working after BIOS update

I recently updated my BIOS to V2.60 on my Sat A200
but ever since i apdated the BIOS some of the hardware components stoped working.
So i decided to use the product recovery CD but it wont work anymore.
Each time during its loading stage the system crashes and i get a blue screen mentioning a file called CLFS.SYS as the root of the problem
Is there a solution for my problem?

Hi
What Sat A200-xxx do you have exactly?
From my experience there are different BIOS versions for different operating system.
The Vista and XP needs different BIOS!
But I wonder why the Toshiba recovery disk does not function anymore? ?:|
Usually you should be able to recover the system no matte what BIOS has been installed.
Did you try to format the HDD firstly using another disk for example like Win XP?
Check this!
I think you should format the HDD again and then should try to recover the notebook using the Recovery disk

Spotlight not working after upgrade to Snow Leopard

Spotlight has not been working properly since I upgraded from Tiger to Snow Leopard. I only get partial results. I can see files in Finder that Spotlight is not picking up. It does not pick up most of the items it should.
I've reindexed and that doesn't help.
It worked perfectly before the upgrade.
Does anyone have a fix?

Try adding every drive to Spotlight's Privacy Pane in System Preferences>Spotlight, wait a few minutes & remove them, then wait a few hours/days to see if it's better.
Though slower, in the intterim, you might try...
EasyFind...
http://www.macupdate.com/info.php/id/11076
Find Any File...
http://www.macupdate.com/info.php/id/30079/find-any-file
I've actually disabled the worst Searh utility/Function I've ever seen on most of my Macs, just keep Spotlight active on a couple to try to assist with all it's problems.

Equium L40-17M PSL49E - Wlan stoped working after BIOS update

Hi all,
I have problem with my lap-top.
The laptop is Equium L40-17M, model PSL49E-00C005KS.
Before couple days i update my BIOS with version P20B200 (bios-20080617131309), and after update, internal wireless stop working.
Show me device is enable but activity is off, and i can't turn on device.
First thing what i think is "Windows" and i start recovery disk. But after recovery problem is still exist, wireless do not working.
Then i put external USB wireless, and try to connect with router.
Computer recognize USB but he also do not working good, therefore the problem is not in wireless (i am not sure for this), but i think that problem is it because laptop can't recognize correctly USB device.
I want to flash bios with old BIOS but i don't have it
I will grateful to someone who have same problem, tell me how i fix it.
Or send me old bios for my laptop.

My mistake, I don't explain correctly what I done.
Yet yesterday I download driver for WLAN from Toshiba site and install it, but is no result, problem still exist. Combination FN+F8 is forbidden (no displaying icon or not working signal lamp) - its all the same laptop don't have WLAN. It is absolutely strange.
My laptop OS is: Windows Vista premium (32bit), and first I download BIOS for Vista version 2 of course (I am not such stupid to download BIOS, before read notice), after problem I download & BIOS for XP (just for test).
And result from test is: WLAN yet not working, when I push Fn+F8, icon for WLAN show me that device is turn off and every time is always off. No matter what button I push or what command execute. Install driver for WLAN, but its same result at - not working devices.
After all this operation I flash BIOS, with version for Vista, recover laptop with recovery disk and install driver for WLAN. No matter, my hard working was unjustifiable, device not recognized & not working.
May be tomorrow I try to install Linux, just for try-out.

Drag & Drop in finder and spotlight stopped working after 10.5.7 update

Fresh brand new iMac here, clean install 10.5.6, everything fine, copied user data back, all fine, applied 10.5.7 update, bang, admin and user can no longer drag & drop.
I did a permission fix which finds a LOT wrong, that worked, once, next restart gave me the same problem. Running permission fix did not resolve it this time.
Seeing the machine needs to be urgently used I'm re-installing but would LOVE to see a fix as I have 3 other machines with exactly the same problem.

Try a restart.
Try trashing your com.apple.finder pref located in HD/Users/yourname/Library/Preferences, then restart.
Apply the stand alone combo update 10.5.6 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Duplex printing stoped working after one of the recent updates.

Hi,
For some reason my HP Laserjet P3015 stoped printing duplex. Some dialogs show the "beidseitig drucken" option and I can check this and get duplexing. But I configured duplexing in the HP printer settings and it is ignored. I had system settings from earlier times with the option enabled but they seem to not work any longer. So how do I set up a printer to print duplex from all applications?
Thanks for helping me saving trees!
Best
Stefan

It is possible to set duplex as the default setting via CUPS - the core printing system used in OS X. Using a web browser you open an internal web page, select the printer you want to modify, make your changes and then save this as the default. Then when you print, this setting will stop you from having to access the driver menus.
But there is a caveat to this setitng being used and that is based on the application being used. If the application uses or involves the default print dialog in the print job submission, then you will get a duplex print job. But there are applications that bypass the default print dialog and will therefore submit the print job without the settings you have set. The Print icon in Word for Mac 2011, part of the MS Office 2011 suite, is an example of the print dialog and thus the default settings being ignored. But if you select File > Print in Word, this will invoke the print dialog and your defaults will be honoured.
To access CUPS, open Safari and type
http://127.0.0.1:631/printers
Note that for OS X 10.8, the CUPS page is blocked by default. To enable it, open Terminal and type "sudo cupsctl WebInterface=yes" (without the quotation marks). Enter the admin password when prompted and then refresh the browser view.
With the CUPS web page open, select the printer you want to modify. Then from the Administration drop menu, change to "Set Default Options".
This will show a new page with some menu headings (links). You may have to check each one but one of them will have the duplex (or two sided) setting. With the option selected you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button. Click this and you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
You can now check that the change has been successful by selecting to print this page from Safari. With the correct printer selected, change to the relevant menu to ensure you modification has worked.

My safari has been stoped working after I had updated it to the latest version!what should I do?!

my saafari hasn't been working for 2 month:(

If your Safari keeps crashing, or if you are updating Safari (or just have) and it is misbehaving:
N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings, and don't change the application's name or move it from the top level of the Applications Folder to a sub-folder.
(If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall. Alternatively you can download Safari directly:
Safari 4.1.3 for Tiger can be downloaded here:
http://support.apple.com/kb/DL1069
Safari 5.0.6 for Leopard (and Snow Leopard) can be downloaded from here:
http://support.apple.com/kb/DL1070
Make sure you download the correct version for your system.
Also, observe the recommended procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now Tiger uses Safari 4.1.3 and Leopard uses Safari 5.0.5, as does Snow Leopard albeit a different version. If these latest versions of Safari are not the fastest browser you have ever used, then something is wrong!
(Trying to revert to a previous version of Safari can have repercussions, as previous versions of Safari used a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet, and the dreaded CT Toolbar. If you have them, trash them and go the developer's sites to see if new versions are available for the latest version of Safari on your current operating system.
You must also ensure that you have downloaded and installed all the correct version for your Mac of Security Updates. These require a restart and a permission repair.
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
Hard Disk/Library/InputManagers
Home/Library/InputManagers
especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
Lastly, the Safari updates require a restart of your Mac, and sometimes even a double restart is required.

Minidisplay - DVI stopeed working after reinstall (windows 8 bootcamp)

My new MacBook Pro with BootCamped windows 8 cant see my second monitor using minidisplay->dvi .. it used to work but after a reinstall it has stopped working, any ideas?
Im using latest Nvidia driver (314.07)
Message was edited by: sdol

Flowerose wrote:
Hi,
After an update from Windows 8.1, I couldn't send anything to my laptop using Bluetooth.
I searched the internet and found several things that might work, but they all didn't, except that I can only send from my laptop to my phone, but not from my phone to my laptop.
When I try to send a file to my laptop, they are linked to each other. In the meantime my laptop keeps searching for other bluetooth devices... Then the connection is lost.
I tried to reinstall drivers, tried it with services.msc, but it didn't help anything.
My device is an Ideapad U330 Touch
OS Windows 8.1
Intel Wireless Bluetooth 4.0 + HS-adapter
Driver version: 3.1.1311.400
Thank you.
F.
Have you tried downloading the bluetooth driver from Intel's site? The latest version is 17.0.1401.03.

[SOLVED]Tuner stoped working after kernel update (2.6.25)

I upgraded kernel 2.6.24 to 2.6.25 and my Hauppauge WINTV tuner stopped working. Although it was recognized as I show in dmesg I had the following error "tuner 1-0061: tuner type not set". I downgraded to kernel 2.6.24 (and also downgraded nvidia and lirc packages which were dependencies) and the tuner works fine. This time tuner type is set correctly "tuner 1-0061: type set to Philips PAL/SECAM m" What should I do to make it work with newest kernel?
This is some info from dmesg relevant to my tuner card.
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
cx2388x alsa driver version 0.0.6 loaded
tveeprom 1-0050: Hauppauge model 34519, rev J260, serial# 10439851
tveeprom 1-0050: tuner model is LG S001D MK3 (idx 60, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 1-0050: audio processor is CX880 (idx 30)
tveeprom 1-0050: has radio
cx88[0]: hauppauge eeprom: model=34519
input: cx88 IR (Hauppauge WinTV 34xxx as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input6
lp0: using parport0 (interrupt-driven).
cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 23, latency: 32, mmio: 0xfa000000
tuner 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0043: type set to tda9887
tuner 1-0061: chip found @ 0xc2 (cx88[0])
tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
tuner 1-0061: type set to Philips PAL/SECAM m
tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
tuner 1-0061: type set to Philips PAL/SECAM m
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
Last edited by axel (2008-06-16 18:13:23)

I tried the latest 2.26.5.6 kernel and I get the same tuner 1-0061: tuner type not set message. This time when I open xawtv I can watch the first channel in my list, but I can't change between channels. Radio doesn't work at all.
Below I include modules that are loaded in kernel .25 and after that those loaded with the working .24 one. Any ideas?
kernel 2.6.25
Module Size Used by
ac 4484 0
acpi_cpufreq 7692 0
agpgart 28244 2 intel_agp,nvidia
ahci 25224 0
ata_generic 5636 0
ata_piix 17668 5
battery 10372 0
btcx_risc 4488 3 cx8800,cx88_alsa,cx88xx
button 6416 0
cdrom 33952 1 sr_mod
compat_ioctl32 1536 1 cx8800
coretemp 6400 0
cpufreq_ondemand 7180 2
crc_itu_t 2304 1 firewire_core
cx8800 28956 0
cx88_alsa 10504 1
cx88xx 59560 2 cx8800,cx88_alsa
dock 7952 1 libata
ehci_hcd 33804 0
evdev 9472 4
ext3 124040 4
fan 4356 0
ff_memless 5128 1 usbhid
firewire_core 36928 1 firewire_ohci
firewire_ohci 16512 0
freq_table 4112 2 cpufreq_ondemand,acpi_cpufreq
hid 39296 1 usbhid
hwmon_vid 3328 1 it87
i2c_algo_bit 6020 1 cx88xx
i2c_core 19348 17 tuner,tea5767,tda8290,tda18271,tda827x,tuner_xc2028,xc5000,tda9887,tuner_simple,mt20xx,tea5761,cx88xx,i2c_algo_bit,tveeprom,v4l2_common,i2c_i801,nvidia
i2c_i801 9232 0
ieee1394 79288 1 ohci1394
intel_agp 23740 0
ipv6 256196 10
ir_common 32772 1 cx88xx
it87 19856 0
jbd 44052 1 ext3
libata 142096 5 pata_acpi,ata_piix,ahci,ata_generic,pata_jmicron
lp 9444 0
mbcache 7172 1 ext3
mt20xx 12040 1 tuner
nvidia 7096356 30
ohci1394 28720 0
parport 31596 3 parport_pc,ppdev,lp
parport_pc 34884 1
pata_acpi 4992 0
pata_jmicron 4224 0
pcspkr 2816 0
ppdev 7556 0
ppp_generic 24348 0
processor 32096 2 thermal,acpi_cpufreq
r8169 25476 0
rtc_cmos 9120 0
rtc_core 15516 1 rtc_cmos
rtc_lib 2944 1 rtc_core
scsi_mod 92204 4 sg,sd_mod,sr_mod,libata
sd_mod 23320 6
sg 27188 0
slhc 6016 1 ppp_generic
snd 46628 14 cx88_alsa,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
snd_hda_intel 336440 1
snd_hwdep 7428 1 snd_hda_intel
snd_mixer_oss 14848 1 snd_pcm_oss
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_pcm 68228 3 cx88_alsa,snd_hda_intel,snd_pcm_oss
snd_pcm_oss 38656 0
snd_seq 48432 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq_oss 30336 0
snd_timer 19848 2 snd_seq,snd_pcm
soundcore 6496 1 snd
sr_mod 15300 0
tda18271 31496 1 tda8290
tda827x 10116 1 tda8290
tda8290 12676 1 tuner
tda9887 9348 1 tuner
tea5761 4868 1 tuner
tea5767 6404 1 tuner
thermal 15260 0
tuner 35296 0
tuner_simple 8712 1 tuner
tuner_xc2028 19984 1 tuner
tveeprom 14608 1 cx88xx
uhci_hcd 22288 0
usbcore 129776 4 usbhid,ehci_hcd,uhci_hcd
usbhid 42944 0
v4l1_compat 13956 1 videodev
v4l2_common 10624 2 tuner,cx8800
videobuf_core 15876 3 cx8800,cx88xx,videobuf_dma_sg
videobuf_dma_sg 11396 3 cx8800,cx88_alsa,cx88xx
videodev 31616 3 tuner,cx8800,cx88xx
xc5000 10244 1 tuner
kernel 2.6.24
Module Size Used by
ac 4612 0
acpi_cpufreq 11292 0
agpgart 28120 2 nvidia,intel_agp
ahci 23812 0
ata_generic 5380 0
ata_piix 14852 5
battery 10756 0
btcx_risc 4488 3 cx88_alsa,cx8800,cx88xx
button 6544 0
cdrom 34080 1 sr_mod
compat_ioctl32 1536 1 cx8800
cpufreq_ondemand 7180 2
crc_itu_t 2304 1 firewire_core
cx8800 29104 0
cx88_alsa 10376 1
cx88xx 58792 2 cx88_alsa,cx8800
ehci_hcd 33804 0
evdev 9344 4
ext3 124040 4
fan 3844 0
ff_memless 5128 1 usbhid
firewire_core 36800 1 firewire_ohci
firewire_ohci 16000 0
freq_table 4112 2 cpufreq_ondemand,acpi_cpufreq
hid 38272 1 usbhid
hwmon_vid 3328 1 it87
i2c_algo_bit 6020 1 cx88xx
i2c_core 19584 11 tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,cx88xx,i2c_algo_bit,tveeprom,i2c_i801,nvidia
i2c_i801 8848 0
ieee1394 81464 1 ohci1394
intel_agp 22164 0
ipv6 253764 10
ir_common 30724 1 cx88xx
it87 18060 0
jbd 44308 1 ext3
libata 141424 5 pata_acpi,ata_piix,ahci,ata_generic,pata_jmicron
lp 9220 0
mbcache 7168 1 ext3
mt20xx 11912 1 tuner
nvidia 7817696 28
ohci1394 28976 0
parport 31560 3 parport_pc,ppdev,lp
parport_pc 35300 1
pata_acpi 5248 0
pata_jmicron 4352 0
pcspkr 2944 0
ppdev 7556 0
ppp_generic 24596 0
processor 29144 2 thermal,acpi_cpufreq
r8169 25732 0
rtc_cmos 7712 0
rtc_core 15752 1 rtc_cmos
rtc_lib 3072 1 rtc_core
sd_mod 23168 6
sg 26896 0
slhc 6016 1 ppp_generic
snd 46436 14 cx88_alsa,snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
snd_hda_intel 292000 1
snd_hwdep 7556 1 snd_hda_intel
snd_mixer_oss 14848 1 snd_pcm_oss
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_pcm 70404 3 cx88_alsa,snd_hda_intel,snd_pcm_oss
snd_pcm_oss 38432 0
snd_seq 48464 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq_oss 30336 0
snd_timer 19588 2 snd_seq,snd_pcm
soundcore 6496 1 snd
sr_mod 15268 0
tda8290 11140 1 tuner
tea5761 4740 1 tuner
tea5767 5636 1 tuner
thermal 12956 0
tuner 40224 0
tuner_simple 8584 1 tuner
tveeprom 14736 1 cx88xx
uhci_hcd 23312 0
usbcore 128620 4 usbhid,uhci_hcd,ehci_hcd
usbhid 42560 0
v4l1_compat 13828 1 videodev
v4l2_common 16256 4 tuner,cx8800,cx88xx,videodev
videobuf_core 15620 3 cx8800,cx88xx,videobuf_dma_sg
videobuf_dma_sg 11524 3 cx88_alsa,cx8800,cx88xx
videodev 26624 2 cx8800,cx88xx

The scroll button on my mouse suddenly stoped working after the recent upgrade in firefox

about 6 weeks ago, the scroll button on my mouse quit working when using firefox. It works fine with explorer

about 6 weeks ago, the scroll button on my mouse quit working when using firefox. It works fine with explorer

Spotlight stoped working after 3 days

Similar Messages

Maybe you are looking for